Rolex History: Wilsdorf, the Oyster, the Perpetual and Japan

Hans Wilsdorf was born in Kulmbach on 22 March 1881 and died in Geneva on 6 July 1960, and every Rolex made since descends from the firm he started. Our pillar on Japanese horology explains why Swiss houses matter to the way Japan reads a watch, and the Watch Almanac places Rolex among the other great houses. The street where many Tokyo buyers first met the crown is the subject of our walk through Ginza and the watch.

The house is easier to read once one fact is clear: almost every Rolex since 1926 is an Oyster, and the model names are families built on that one case. The Datejust, the Submariner, the Explorer and the Day-Date are not separate inventions so much as the same sealed case given a new task. Read that way, the catalogue becomes a family tree rather than a list of names.

Rolex in brief

The table below gives the dates that anchor the house; each is taken up in the sections that follow.

Wilsdorf in London

A Bavarian in London

Wilsdorf was the second son of a family of three children, born to Protestant parents in Bavaria. He came to watches through trade rather than the bench, and he later became a British citizen. His view of the business was blunt: only great marketing, he is quoted as saying, is needed to make a company succeed. That sentence explains much of what followed, from the swimmer in 1927 to the names given to every family since.

A partnership of two

In 1905 Wilsdorf and Alfred Davis founded Wilsdorf & Davis in London. The firm imported movements made by Hermann Aegler in Bienne and placed them in cases made by Dennison and others. The finished watches went to jewellers, many of whom put their own names on the dial, so the earliest work of the firm often does not say Rolex at all.

The wristwatch at the time was not yet trusted by most men. Pocket watches were the serious instrument, and a small movement on the wrist was thought too fragile and too imprecise to keep time. Wilsdorf's wager was that a reliable wristwatch could be made, and that people would buy one if they could be persuaded it was reliable.

The name on an omnibus

In 1908 Wilsdorf registered the name Rolex. He later told the story of how it came to him: after trying combinations of letters that gave him some hundred names, he was riding on the upper deck of a horse-drawn omnibus along Cheapside in the City of London when, as he put it, a genie whispered the word in his ear. The name was short, it read the same in any language and it fitted on a small dial.

Chronometers before the wrist was trusted

The house's first claim was about accuracy, not water. In 1910 a Rolex became the first wristwatch in the world to receive the Swiss Certificate of Chronometric Precision, from the official rating centre in Bienne. Four years later, in 1914, Kew Observatory in Great Britain gave a Rolex wristwatch a class A precision certificate, a grade until then given only to marine chronometers. The two certificates gave Wilsdorf the proof he needed to sell the idea of a precise wristwatch.

The move to Geneva

Leaving London

In 1919 Rolex moved to Geneva, a city known internationally for watchmaking. The company was registered there in 1920 as Montres Rolex S.A. The house has stayed in Geneva since, and its head office is still in the city.

Other versions give a slightly different order of names: Rolex Watch Co. Ltd and then Montres Rolex SA in 1919, before Rolex SA in 1920. The difference is one of registration dates rather than substance, and the table in where the records disagree sets the versions side by side.

Aegler in Bienne

For most of its history the house relied on two sites: cases, dials and final assembly in Geneva, and movements made in Bienne by the Aegler firm whose movements Wilsdorf had used since London. Rolex bought the Bienne movement maker in 2004, part of a move in the early 2000s to make more of its components itself. A collector reading an older Rolex is therefore reading two workshops, even when the dial carries one name.

The Oyster and the Channel

A case that kept water out

The early wristwatch had a practical weakness: dust and moisture crept in under the crystal and around the crown and damaged the movement. In 1926 Rolex introduced the Oyster, a waterproof and dustproof case, which the house describes as the first waterproof wristwatch. The patent behind the screw-down crown is attributed to Paul Perregaux and Georges Peret, and Rolex bought it and made it the centre of its advertising. The case was named for the shellfish that closes tight against the sea.

Every later family rests on this case. A Datejust, a Submariner and a Day-Date all carry the word Oyster on the dial because each began as the same sealed case with a new task. Today the house still names its crowns by the number of seals inside them, Twinlock with two and Triplock with three.

Mercedes Gleitze, 1927

On 7 October 1927, at her eighth attempt, Mercedes Gleitze became the first British woman to swim the English Channel. Days later another woman claimed a faster crossing, a claim that proved false but threw doubt on Gleitze's record, and under pressure from the press she agreed to swim again in much colder water. She did not finish that second swim, but her endurance settled the argument, and she carried an Oyster with her. The house says the watch was worn; another version has it tied around her neck during the attempt rather than worn on the wrist.

The first Testimonee

Rolex marked the swim with a full-page advertisement on the front page of the Daily Mail, proclaiming the success of the waterproof watch. The house now calls Gleitze its first Testimonee, the word it uses for the people who wear its watches in public. Its advertising carried the line that the Rolex wristwatch was the world's best by every test. Jewellers of the period displayed the Oyster inside a fish tank or bowl to show that it kept water out, a habit that continued into the 1960s.

The rotor and the bubble back

The Perpetual rotor, 1931

In 1931 Rolex patented a self-winding mechanism built around a Perpetual rotor, a half-moon plate that turns freely under gravity as the wrist moves. Earlier automatic designs had not produced a practical watch, and the rotor solved the problem well enough that the Oyster became the Oyster Perpetual. The first Oyster Perpetual of 1931 was made in yellow gold. Together, the sealed case and the rotor meant that the crown, the weak point, had to be opened far less often.

Why the back bulges

The rotor sat on top of the movement, and the case back had to be domed to make room for it. Collectors call these early Oyster Perpetuals bubble backs, for the swollen profile seen from the side, and even the first Datejust of 1945 still had one. A bubble back from the 1940s is the oldest family most collectors will meet, and it is the clearest physical record of how the house added the rotor to an existing design.

Everest from the air, Bonneville on land

The house tested the Oyster in public through the 1930s. The first expedition to fly over Everest, in 1933, carried Oysters. On 4 September 1935 Sir Malcolm Campbell, wearing a Rolex, set a land speed record of over 300 miles an hour at the Bonneville Salt Flats in Utah. Campbell wrote to the house that his watch kept perfect time under somewhat strenuous conditions.

The Air series

During the Second World War many Royal Air Force pilots bought Rolex watches privately, since they were not standard issue. Wilsdorf answered with a series of Air models built for legibility: the Air-King, the Air Lion, the Air Tiger and the Air Giant. The others were dropped over time, and the Air-King, introduced in 1945, is the only one of the series still in the catalogue.

The foundation and the Datejust

A foundation in 1945

Wilsdorf's wife died in 1944, and on 1 August 1945 he set up the Hans Wilsdorf Foundation in Geneva. His will, confirmed in 1960, left all his shares to the foundation so that Montres Rolex SA would outlive him. Since his death the foundation has owned the company, and part of its income goes to charity. Because the owner is a private foundation, much of the house's history is told in its own words.

The Datejust, 1945

The Datejust of 1945 was the first self-winding waterproof chronometer wristwatch to show the date in a window at three o'clock. Wilsdorf called it the pinnacle of watchmaking science. The first reference, 4467, was made in 18-carat yellow gold with a domed bubble back, and it marked the company's 40th year. Later Datejust references moved from four digits to five and then six, a progression taken up in the section on reading a Rolex below.

Jubilee, flutes and the Cyclops

The first Datejust came with a fluted bezel and a new bracelet named the Jubilee for the anniversary. In 1953 the Cyclops lens was added to the crystal to magnify the date. The date change became instantaneous in the mid-1950s; the house gives 1956; 1955 also appears. The fluted bezel, the Jubilee bracelet and the Cyclops are still the three things most people picture when they hear the word Rolex.

The Datejust is also the family we meet most often in Japan. In our census of the Japanese category for the house, close to one title in six named a Datejust, more than any other family. That share is why the Datejust appears again in the sections on reading and condition below.

Tool watches of the 1950s

The Explorer, 1953

On 29 May 1953 Sir Edmund Hillary and Tenzing Norgay reached the summit of Everest, and Sir John Hunt's expedition was equipped with Oyster Perpetual watches. The Explorer was launched the same year to celebrate the ascent. Reference 6350 is usually treated as the first watch to carry the Explorer name, with 6150 of 1952 and 1953 just before it, though 6150 is sometimes named as the first. Reference 6610 followed, and then the long-lived 1016, which ran until 1989. The 1016 was a plain, black-dialled watch with no date, and Ian Fleming wore one. In 1971 the Explorer II added a fixed 24-hour bezel and a separate 24-hour hand for cave explorers who could not tell day from night.

The Submariner, 1953

The Submariner of 1953 was waterproof to 100 metres and was shown to the public at the Basel watch fair in 1954. The first case reference was either 6204 or 6205; it is unclear which came first. The Submariner Date followed in 1969, and the rating rose to 300 metres in 1979 for the Date and 1989 for the no-date model. The family has its own guide on the Submariner.

The GMT-Master, 1954 or 1955

As airliners began to cross time zones in the 1950s, Rolex built a watch for Pan American World Airways, the most prominent American intercontinental airline of the time. The first GMT-Master, reference 6542, had a 38-millimetre case, a fourth hand for a second time zone and a two-colour rotating bezel. Its first bezels were made of Bakelite, which cracked, and they were replaced with metal inserts towards the end of the run. The 6542 is dated to 1954 in some versions; others give production from 1955 to 1959. In 1982 a new movement let the hour hand be set on its own, the basis of the GMT-Master II.

The Milgauss, 1956

The Milgauss, reference 6541, was made for scientists working near magnetic fields and was tested by researchers at CERN in Geneva. The name joins the French mille, a thousand, with gauss, the unit of magnetic field. It was dropped in 2023.

The Day-Date, 1956

The Day-Date appeared at the Basel fair in 1956 as the first watch to show the day of the week spelled in full as well as the date. It was made only in 18-carat gold or platinum, and the President bracelet was made for it at its launch. In 1965 President Lyndon B. Johnson became the first American president to wear a gold Day-Date, and the house later used the name The Presidents' Watch in its advertising.

Depth and speed in the 1960s

The Trieste, 23 January 1960

Through the 1950s Rolex tested an experimental watch it called the Deep Sea Special. On 23 January 1960 the bathyscaphe Trieste, piloted by Jacques Piccard and US Navy lieutenant Don Walsh, reached the bottom of the Challenger Deep in the Mariana Trench. A Deep Sea Special was fixed to the outside of the vessel and came back from about 10,916 metres in working order. It was an experimental watch rather than a catalogue model, and the house links it directly to its later Deepsea.

The Cosmograph Daytona, 1963

The Cosmograph was launched in 1963 as a chronograph for racing drivers, and it soon took the name of Daytona Beach in Florida, where speed records had been set in the early twentieth century. Campbell had set five of his records there. The first series was wound by hand. A second series of 1988, starting with reference 16520, used a modified automatic movement first made by Zenith, and a third series of 2000 brought calibre 4130, a chronograph movement developed and made by Rolex with fewer components. A fourth series followed in 2023. The tachymetric scale on the bezel reads average speeds of up to 400 units an hour, and on current models the chronograph pushers screw down against the case like the crown.

The early hand-wound Daytonas were not much wanted when new. Only later did certain dials, named after the actor Paul Newman, turn the family into one of the most studied in collecting. For a chronograph from a different school and the same decade, compare the Speedmaster, or the slide-rule bezel of the Navitimer.

The Sea-Dweller, 1967

The Sea-Dweller of 1967 was waterproof to 610 metres and was designed with professional divers who spent long periods under pressure. Its helium escape valve, patented in 1967, lets gas that has entered the case during saturation diving escape during decompression without damaging the watch. From 1971 the divers of the French firm Comex wore Sea-Dwellers at depth. The Sea-Dweller 4000 of 1978 was rated to 1,220 metres. The first Sea-Dweller is sometimes dated to 1971; the house gives 1967.

From explorers to sailors

The house kept naming watches after the work they were meant for. The Explorer II came in 1971, the Yacht-Master in 1992 and the Yacht-Master II, with a programmable countdown and a mechanical memory, in 2007. In 1976 the house created the Rolex Awards for Enterprise to mark 50 years of the Oyster.

The quartz years

The Beta 21 consortium

When quartz arrived, Rolex did not ignore it. In 1968 it joined a consortium of 16 Swiss watch firms to develop the Beta 21 quartz movement, used in the Rolex Quartz Date 5100 and in watches from other houses. The first quartz wristwatch on sale, though, had come from Japan, a story told in our piece on the Quartz Astron.

The Oysterquartz

After about five years of work the house produced its own quartz movements, calibres 5035 and 5055, for the Oysterquartz Datejust and Day-Date. The movements were built to be serviced like mechanical ones, with 11 jewels and regulation through a pallet fork and wheel. The cases were angular, with integrated bracelets and sapphire crystals, and three Datejust references were made, 17000 in steel, 17013 in steel and yellow gold and 17014 in steel and white gold. The house submitted its last quartz calibres for chronometer certification in 2001, and only about 25,000 Oysterquartz watches are thought to have been made. The launch year is given as 1976, as 1977 and even as 1972.

Steel of the 904L family

In 1985 Rolex became the first watch house to make cases from steel of the 904L family, an alloy used in aerospace and chemical industries, which it now calls Oystersteel. It resists corrosion well and takes a bright polish, but it is softer than the more common 316L and scratches more easily. That last point matters when reading the condition of any steel Rolex made since.

The modern house

Movements made in-house

The calibre 4130 of 2000, a chronograph with fewer components than the movement it replaced, was the first Daytona movement made entirely by the house. The purchase of the Bienne movement maker in 2004 completed the move.

Parachrom, Cerachrom and the Superlative Chronometer

In 2005, after five years of research, the house introduced the blue Parachrom hairspring, and in the same year it patented the Cerachrom ceramic bezel for its Professional models. Unlike the aluminium inserts it replaced, the ceramic does not fade in sunlight and resists scratches. In 2015 the house redefined its own Superlative Chronometer certification, which now covers every Rolex watch.

The Sky-Dweller and the deepest dive

The Sky-Dweller of 2012 was a new model for travellers. On 26 March 2012 the film-maker James Cameron took an experimental Rolex to the bottom of the Mariana Trench, 52 years after the Trieste. The Sea-Dweller line now runs from 1,220 metres to 3,900 metres for the Deepsea, and to 11,000 metres for the Deepsea Challenge added in 2022.

Scale and ownership today

The house made an estimated 1.24 million watches in 2023. It is still owned by the foundation Wilsdorf created, and its subsidiaries are Montres Tudor SA and the retailer Bucherer, which Rolex agreed to buy in 2023. In 2025 it introduced the Land-Dweller, with an automatic movement in a case and integrated bracelet drawn from the Oysterquartz.

Families and references to know

Most Rolex watches that reach collectors belong to a dozen families, and each has one or two early references worth knowing by number. The table gives the first year, an early reference and the detail that most often decides how a piece is read.

The families sit beside the other great Swiss houses in useful ways. The integrated steel bracelet of the Oysterquartz belongs to the same decade as the Royal Oak and the first Nautilus, while the gold Day-Date answers the dress watch tradition of the Calatrava. Cartier came to the wristwatch from jewellery rather than from instruments, a contrast drawn in our Cartier guide.

The Japan thread

Japan has been one of the places where Rolex is most studied and most carefully kept, and the house's history there has several threads of its own.

Marunouchi, 1955

A Rolex service office opened in Marunouchi, in central Tokyo, in 1955. Accounts differ on what that office was: in one version Nihon Rolex was founded that year with a service centre in Marunouchi, while in another the 1955 office was a service operation and Nihon Rolex was formally established 25 years later, in 1980. The house's name rose sharply in Japan during the boom years of the 1980s, when a Rolex became a mark of status.

A registry spelling and a move to Ginza

The national corporate number register lists the Japanese company under a spelling that uses a full-size tsu, read as Nihon Rolex. On 4 January 2024 its registered head office moved from the Yusen Building at Marunouchi 2-3-2 to Ginza 3-5-4. Watches sent for service in Tokyo now go to a mail-in service centre at Toyo 3-28-6 in Koto ward. Ginza is the street where Japan's own watch trade began, which makes the move a return to familiar ground.

The Space-Dweller

The rarest Japanese chapter is a dial. The Space-Dweller is in every way an Explorer reference 1016 except for the words Space-Dweller on a gilt dial. It is sometimes called a Japan-only edition made to commemorate Project Mercury, but the Japanese launch for the visit of American astronauts in the 1960s is best treated as one of the stories told about it. Rolex applied for the name in Switzerland in 1966 and filed again in 1968, which suggests first use around 1967. The same guide warns that many dials offered as Space-Dwellers are not real.

Love Generation and the Explorer 14270

From 13 October to 22 December 1997 Fuji TV broadcast Love Generation, an 11-episode Monday drama starring Takuya Kimura and Takako Matsu, which reached a rating of 30.8 per cent. The Explorer reference 14270 was famously featured in the drama, and for many it became the watch of the late 1990s and early 2000s in Japan. The same article records that 30 Explorers bought in the United States in 1996 and flown to Japan were gone within two hours at a watch show. The 14270, made from 1989 to 2001, brought a sapphire crystal and the calibre 3000 to the Explorer, and its earliest dials, with the 3, 6 and 9 numerals filled with black enamel, are known to collectors as Blackout dials.

Tudor, once chudoru

Wilsdorf registered the Tudor name in 1926 and founded the Tudor company in 1946 to widen his reach in Britain. For decades Tudor had no official distributor in Japan, and the watches that arrived through parallel import were known by a Japanese reading of the name, chudoru. In 2018 official sales began under the reading Tudor.

The DEEPSEA ruling, 2009

When Rolex launched its Deepsea in 2008, a Japanese firm, Fukumoto Denki, already held a registered mark for the same word for watches. Rolex asked for the mark to be cancelled for non-use, and on 8 October 2009 the Intellectual Property High Court ruled that the word DEEPSEA printed on the dial of the Japanese firm's diver's watch was a use of the mark, so the registration stood. The case is sometimes described as an infringement suit that Rolex lost; the court record shows a dispute over whether a mark had been used.

How Japan keeps a Rolex

Japanese owners tend to keep a watch with its box, its papers and its service records, a habit described in our piece on why Japan keeps things in the box. The gold Rolex families also carry marks that Japanese assay practice reads in its own way, explained in our guide to Japanese gold and platinum hallmarks. For the domestic houses that shaped the same buyers, see Grand Seiko and Credor.

Wilsdorf on film

The house's own short film tells the story of its founder, the man behind the crown.

Wilsdorf was born in 1881 and died in 1960, and the film covers the years between.

How to read a Rolex

The reference number

Every Rolex case carries a reference number, and that number is the first thing to check against the dial, the bezel and the bracelet. Older references have four digits, later ones five and six, and the final digits often record the metal or the bezel. The full system is set out in our guide to Rolex reference numbers.

The serial number

The serial number dates the case, not the movement or the dial. Serial numbers began in 1926 and ran in sequence until 1954, when the count restarted; a letter was added in front of six digits from 1987, and since 2010 serials have been random. Year-by-year tables are in our guide to Rolex serial numbers.

Case, crown and bracelet

A Rolex is a set of parts that were made to belong together, and many watches have had one or more of them changed during service. The crown should match the family, Twinlock for most Oyster models and Triplock for the Professional divers. The bracelet reference and end links should fit the case reference, version by version, as with the Explorer 14270. A bezel insert, a dial or a set of hands replaced during a service is not a fault, but it changes what the watch is.

Papers and boxes

Original papers name the reference and serial and record when and where the watch was first sold. The case for keeping them, and what they add, is set out in our guide to the full set.

Condition and care

Reading a Japanese grade

Japanese descriptions use letter ranks from new to well worn, and the same ranks are applied to the case, the bracelet and the dial. How those ranks work is explained in our guide to Japanese condition ranks, and the way we translate them onto one world scale is in our grading guide.

What the census shows

A large part of what is offered in Japan under the Rolex name is not a whole watch. In our census, between a quarter and a third of titles were bracelets, links, boxes or parts rather than complete watches. A box or a spare link can be a useful find, but it is worth reading every title twice before assuming a watch is attached.

Polish, steel and service

Steel of the 904L family scratches more easily than common watch steel, so most steel Rolex watches have been polished at some point. A case that keeps its sharp edges and bevels has usually been polished lightly or not at all. Watches sent to the house for service in Tokyo go to the mail-in service centre of the Japanese company in Koto ward. Every piece we hold is checked under our authenticity guarantee.

Where the records disagree

The house writes most of its own history, and other accounts do not always match it. The table sets the main differences side by side.

None of these differences changes the outline of the story, but several change how a particular watch should be dated or described.

A sceptic's reading

Firsts with qualifiers

Many of the house's firsts carry careful qualifiers. The Submariner is often called the first diver's watch, yet Omega's Marine of 1932 was rated deeper, and the Blancpain Fifty Fathoms appeared ten months before it. The GMT-Master was not the first watch to show two time zones either. The Datejust claim is precise for a reason: the first self-winding waterproof chronometer wristwatch with a date window.

Everest

The 1953 Everest expedition carried watches from both Rolex and Smiths, and it was a Smiths that Hillary wore to the summit. The house says the expedition was equipped with Oyster Perpetuals, which is true, and launched the Explorer in its honour.

None of this reduces the watches. It is a reminder that the history of Rolex is also the history of the best-told story in watchmaking, which is what Wilsdorf said he wanted.

What the house holds

We hold pieces from several decades of the house, each graded and photographed in full. From the bubble back years there is a reference 3065 of about 1946 in 14-carat gold with hooded lugs: see the bubble back. From the tool watches there is a GMT-Master 1675/3 of 1970 with a matte brown dial: see the GMT-Master. For the deepest of the divers there is a Sea-Dweller 16600 in steel: see the Sea-Dweller.

From the dress families there is a Datejust 1601 of 1977 with a champagne mosaic dial and a fluted bezel: see the Datejust. There is a Day-Date 18038 of 1978 in 18-carat yellow gold with a champagne dial: see the Day-Date. And from the quartz years there is an Oysterquartz Datejust 17000 in steel with a silver dial: see the Oysterquartz. The wider field of watches we hold is on our collectible watches shelf.

Questions

Who founded Rolex?

Hans Wilsdorf, with his brother-in-law Alfred Davis, as Wilsdorf & Davis in London in 1905.

Who owns Rolex today?

The Hans Wilsdorf Foundation, set up in Geneva in 1945, which has owned the company since Wilsdorf's death in 1960.

What does Oyster mean on a Rolex dial?

It names the waterproof case of 1926, which nearly every later model uses.

What is a bubble back?

An early Oyster Perpetual whose case back is domed to make room for the self-winding rotor introduced in 1931.

When was the Datejust introduced?

In 1945, as the first self-winding waterproof chronometer wristwatch with a date window.

What is the Space-Dweller?

An Explorer 1016 with Space-Dweller on the dial, linked to the Japanese market in the 1960s; many dials offered under the name are not genuine.

How do I date a Rolex by its serial?

Serials ran in sequence from 1926, restarted in 1954, took a letter from 1987 and became random in 2010; after that, only the papers date the watch.

Was Tudor sold in Japan before 2018?

Only through parallel import, under the reading chudoru; official sales began in 2018.

The last step

A London office of 1905 became a Geneva house in 1919, made the Oyster in 1926 and the Perpetual rotor in 1931, and has belonged to a foundation since 1960. Every Rolex we hold is on our Rolex shelf. If the reference you want is not there, our otoriyose service can look for it in Japan.

Further reading

References

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.