Popy: Chogokin, Jumbo Machinder and the Showa Robot Toy

A toy company for the candy shop

Bandai founded Popy in July 1971. The new firm was not meant to compete with its parent. It was meant to reach children in places Bandai's toys did not go. Those places were the small sweet shops and stationers on every Japanese street corner.

The company began with seven members. Naoharu Yamashina, Bandai's founder, was its president, but two directors ran it day to day. Yamashina gave them three conditions and one more rule on top.

The rules shaped the company. Popy could not use Bandai's factories, so it planned and designed toys and found new makers for them. It could not take Bandai's shop counters, so it built new routes into small stores. It could not afford a bad month, so it chased hits tied to the children's shows on television that week.

That last point is the key to everything that followed. Popy was a character company from its first day. It took licences for heroes from television, film and comic books, and it turned each into a product within months. In the early 1970s that was a new way to run a toy business.

The timing was good. A hero seen on Saturday could be a toy on a shop shelf a few weeks later, and Popy built itself around that rhythm.

The growth was fast. Popy's sales grew nearly twelvefold between its first full year, to February 1972, and the year to February 1976. Within five years of its founding it had passed both Bandai and Tomy. It was the largest toy maker in Japan by sales.

The belt that spun

Kamen Rider began on Japanese television in April 1971. Its hero, a masked rider, transforms by wind passing through the spinning fan of his belt. A rival firm, Takatoku, already sold a toy version of that belt. It did not light and it did not spin.

The story of Popy's first product begins at a dinner table. Yukimasa Sugiura, one of the founding members, had bought his eldest son the rival belt. The boy was unhappy that it did not spin and light as it did on screen. Sugiura asked a factory contact to rework the belt so it did both. The boy wore it around the neighbourhood, and other children took notice.

Popy's answer was a battery belt. A lamp lit the buckle and a small motor turned the fan, just as on television. It cost three times as much as the rival's belt. Shotaro Ishinomori, the creator of Kamen Rider, is said to have doubted it would sell at that price.

He was wrong. The light-up spinning Henshin Belt reached about 3.8 million units in roughly two years. It paid for Popy's first years and proved the company's founding idea. Children would pay more for a toy that did what their hero did.

The lesson stayed with Popy for its whole life. Every major line that followed was built around one action from the screen. The robot fired its fist, the car folded out its wings, the giant stood as tall as a child. Popy sold the action as much as the shape.

The belt also began a long tradition. Each new Kamen Rider has had a transformation belt toy ever since. On our shelves the Popy electric Henshin Belt with its light and spinning buckle is one of the first-generation pieces. We read it as the object that started the company.

Popynica: the pocket vehicles

After the belt came the bike. In 1972 Popy released a palm-sized die-cast model of the Cyclone, the motorcycle Kamen Rider rides. It was sold as the Mini-Mini Cyclone. Die-cast metal gave the small toy a weight that children could feel in the hand.

From July 1973 Popy gave its pocket vehicles their own name. Popynica joins the company name to "mini-car", the Japanese word for a small die-cast car. The first model sold under that name was not a character vehicle at all. It was a Honda CB750 Four motorcycle.

Character vehicles soon filled the range. They included hero cars and bikes from live-action shows and fighter craft from robot cartoons. Many had a working feature, such as a hidden missile, folding wings or a part that joined to the main robot.

Sales rose with the shows. In 1974 Popynica sales passed one million. One account goes further and says Popy needed to make a million Popynica every month to keep pace with demand. We print the more careful figure and note the other in the table near the end.

Popynica teaches a collector to read codes. Small and DX Popynica carry product numbers on box and toy. On our shelves the Battle Crusher, code PA-79, from Combattler V and the Volt Bomber, code PB-05, from Voltes V show the two code families side by side. The Delfighter from Daltanious, code PB-62, comes from later in the run.

The larger DX Popynica sets combine machines into one. The Gatcha Spartan five-machine set from Gatchaman Fighter is a good example. Each craft is a toy on its own, and the five lock together into one larger ship.

Jumbo Machinder: a giant at home

Mazinger Z began on television in December 1972. Its creator, the manga artist Go Nagai, gave Japan its first giant robot steered by a pilot sitting in its head. Popy took the toy rights and asked a simple question. What if a child could own the robot at something close to its screen scale?

The answer was Jumbo Machinder. The first prototype stood a full metre tall. It was cut down for safety to about 60 cm. Even so, it towered over every other toy in a Japanese home of the time.

The body was blow-moulded polyethylene. That plastic is light, tough and nearly impossible to break. The fists fired from the arms on springs. The Mazinger Z Jumbo went on sale in spring 1973 and sold about 400,000 units in its first five months.

The line grew fast. Kamen Rider V3, Ultraman Taro and Red Baron joined Mazinger Z in 1973. Robots from Getter Robo, Great Mazinger, Grendizer and Raideen followed. Live-action giants such as Skyzel from Kyodain arrived in 1977. Daimos and Gatchaman's Pimer came in 1978.

Popy changed the format over the years. Some 1976 and 1977 figures were sold as Jumbo Machinder Deluxe. From 1979 to 1980 the Giant Robot Factory range let children bolt the figure together. It covered Gordian, Daltanious, Battle Fever Robo and Daidenjin. From 1981 Super Jumbo Machinder brought Tetsujin 28, Sun Vulcan Robo, Godmars and GoLion.

The giants have their own guide on our Journal. Jumbo Machinder: the giant robots looks at the line alone. On our shelves the Mazinger Z with its rocket punch fists, the Grendizer at 60.5 cm and the Battle Fever Robo at 62 cm show three stages of the run.

The Jumbo shape also outlived Popy. A 1999 revival by another maker reissued Gaiking in the original format, and the Unifive Gaiking of 1999 sits on our shelves for comparison. A new range called Jumbo Machinder NEO followed in 2009.

The birth of Chogokin

In the Mazinger Z story the robot is built from a fictional metal, Super Alloy Z. Popy wanted a small toy that felt as strong as that metal sounded. The answer was zinc-alloy die-casting, the same process that made the Popynica cars. This time it made a whole robot.

Development took more than six months. The first Chogokin Mazinger Z went on sale in February 1974. It stood about 12 cm tall. It was heavy in the hand, and its fists fired on springs.

The name came late. The box had already been printed with the plain word "die-cast". A sticker reading "Chogokin", meaning super alloy, was pasted over it. Accounts differ on who chose the word. Some credit Yukimasa Sugiura and others credit Katsushi Murakami, the young designer behind the toy.

The toy sold at once, and the name became a brand. In 1975 Chogokin passed Jumbo Machinder as Popy's main line. Bold television advertising and boxes printed in special inks taught children to ask for the toy by its name.

Popy's Chogokin carried product codes. The first Mazinger Z was GA-01. Later robots carried GB codes. Our GoLion Deluxe, GB-36 and Godmars DX, GB-66 belong to that later family.

The early boxes have a few quirks a collector should know. Some early Chogokin boxes show photographs of Jumbo Machinder figures rather than the die-cast toy inside. Many Popy boxes also carry the name of Susumu Abe, an educational commentator, on the back.

The word Chogokin became a Bandai trademark. Rival firms that made die-cast robots had to find other names. Many used the ending "-gokin", meaning alloy. Takatoku, Clover, Bullmark and Nakajima were among the firms that followed Popy into die-cast robots.

The range grew to more than 200 characters. It took in robots from cartoons and heroes from live-action shows such as Kamen Rider. For a guide to the wider family of tin, soft vinyl and die-cast toys from the period, see our guide to Showa tin plate and soft vinyl.

Before Popy, children's television in Japan was often paid for by sweet makers and medicine companies. Popy's lines changed that. Popynica and Chogokin sold so well that the toy maker became the sponsor.

That shift altered the shows themselves. A toy company that pays for a programme wants a voice in its design. The robot on screen had to work as a toy in a child's hands. It needed a clear shape, bright colours and an action that a spring or a hinge could copy.

Popy also gave its sponsorship a gentle voice. On boys' programmes its credit line wished children dreams and courage. On girls' programmes it wished romance and dreams for small hearts. Children heard those lines every week.

Girls' toys were a real part of the business. Popy had sold a girls' doll called Popy-chan since 1974. In 1976, with the boys' market crowded, it moved into girls' character toys with Candy Candy. The line was a hit. The next year it made up for weak boys' sales, when supercars drew boys away from robots.

The partnership with animation studios grew closer each year. By the mid-1970s Popy was not only licensing robots. It was helping to plan them. That step produced the most important toy idea of the decade.

The combining robot

Raideen arrived on television in 1975. Its Chogokin could change from a robot into a bird-like ship. It was the first transforming robot toy, and it was also the first Deluxe Chogokin. Popy now had two sizes in its die-cast range, a standard ST size and a larger DX.

Combattler V followed in 1976. This time Popy joined the planning from the start. The first idea was one robot sliced into many machines. Murakami turned that into five distinct vehicles that join into a single giant.

Getting there took several rounds. The first plan called for nine machines, then six, then five. Five was a number a child could hold, store and put together. It also gave the show a nightly scene of the machines joining.

The process taught Popy a hard lesson. When the animators changed the design during production, the moulds had to be cut again. The cost was high. For the next show, Voltes V in 1977, Popy fixed the robot's design early and asked that it not be changed.

Voltes V became a famous combining toy of the era. The DX set sold in a large presentation box called the Volt in Box, with the five machines laid out in a tray. On our shelves the Volt in Box Voltes V set of five machines and the Plastic Deluxe Voltes V show the die-cast and all-plastic versions of the same robot.

The idea did not stay with cartoons. Battle Fever J began on 3 February 1979 and gave the live-action Super Sentai teams a giant robot of their own. Combining robots became a fixture of the genre and are still sold as toys every year. GoLion in 1981 joined five lions into one robot, and Godmars in the same year joined six machines.

The designer's hand

Katsushi Murakami was born in Gifu on 23 September 1942. He trained as an industrial designer. He worked first at Bandai, where in 1971 he designed the Popy logo. He then moved to Popy and spent the next decade shaping its robots.

His list of designs reads like a map of Japanese toys in the late 1970s. He worked on the planning of Raideen in 1975. He shaped Daitetsujin 17, the giant robot Leopardon from the live-action Spider-Man series, Daimos and Daltanious. He designed Battle Fever Robo, Gordian, Daidenjin, God Sigma, Gold Lightan, Sun Vulcan Robo, GoLion and Godmars.

He also drew heroes. Later work included the space sheriff Gavan in 1982 and Kamen Rider BLACK in 1987. Across all of it he kept one rule. A design had to look right on the screen and work right in the box.

Japanese writers called him the man who made Chogokin. A book-length life of him appeared in 2009 under that title. He died on 20 July 2026, aged 83. Bandai's collector arm announced his death in August and thanked him for his work.

Many of his designs sit on our shelves. The Chogokin Daltanious, unused with sealed parts, the Deluxe Chogokin Tetsujin 28 from the 1980 series and the Jumbo Machinder Gordian all carry his hand. For the original Tetsujin 28, see our guide to Tetsujin 28 and the tin robots.

Reading the family

Popy's catalogue can look endless, but it follows a clear logic. Each show produced a family of toys at different sizes and prices. A child could start with a Popynica of one machine and build up to the full DX set.

The Voltes V family shows how it worked. There was a standard die-cast robot, a Deluxe die-cast set, a Plastic Deluxe, Popynica of the single machines and a Jumbo Machinder giant. Each toy taught the child the same five machines and the same joining scene.

Tokusatsu, the live-action effects shows, got the same treatment. Kyodain's two robot brothers became Jumbos and tin walkers. Our Skyzel Jumbo and Godain tin walker are both from Kyodain. The live-action range also reached store displays. Our Ultraman store display figure at 123 cm was made for a shop, not a child's room.

Girls' goods, board games and stationery filled out the business. A Voltes V set on our shelves even came with a pen and a Popynica notebook. The Volt in Box with pen and notebook shows how far a single show could reach into a child's school day.

The family logic also helps with dating. A toy's show sets the earliest year it can be from. Its code, box style and makers' marks narrow the date further. We read all of those together before we print a date on any Popy piece.

Shogun Warriors and Godaikin

Popy's robots reached America through Mattel. From 1977 to 1980 Mattel sold a range called Shogun Warriors. It brought in Jumbo Machinder figures at 24 inches and die-cast robots at three and a half and five inches.

Mattel changed many names for its market. Grendizer became Dragun. Mazinger Z became Mazinga. Raideen became Raydeen, and Combattler V became Combatra. Some of the die-cast robots could still transform, so Raydeen could still become a bird-like ship.

The range ended amid concern over spring-loaded weapons. The fear was that children might fire missiles into other children's eyes. Later Shogun Warriors had their missiles changed to fire safer projectiles. By 1980 the line was gone.

Bandai tried again in 1982 under its own name. Its American arm chose ten of Popy's most popular DX Chogokin for a range called Godaikin. The robots stood about 10 to 12 inches tall. They were close to the Japanese originals but sold in new boxes, shipped from Japan to New Jersey.

Godaikin aimed at older buyers. It ran to about 1985 and gave many American collectors their first taste of Japanese die-cast. GoLion's five lions also had a second life in America, where the show was recut as Voltron.

Other countries took Popy's robots to heart. Grendizer was Goldorak in France and Goldrake in Italy, and it became a cultural touchstone there. Voltes V became a national favourite in the Philippines. For the way these robots crossed borders, see the cross-cultural Japanese toys collection and its reference page.

Into Bandai, 1983

By the early 1980s the market had changed. Children's tastes moved quickly. Sales of die-cast robots slowed toward the end of the 1970s. A new kind of product had also arrived, and it belonged to the parent company.

Bandai launched its Gundam plastic models in July 1980. They sold in vast numbers, passing 100 million kits by October 1984. In the year to February 1982, Bandai's own sales passed Popy's on the strength of those kits.

In March 1983 Bandai absorbed Popy along with Bandai Models and several other group companies. Popy carried on for a time as a division inside Bandai. Its girls' characters moved to another division, and the Popy division kept the boys' lines. The double name appeared in toy advertising on Dynaman in 1983, and by Bioman in 1984 the toys carried Bandai's name alone.

The Popy name had a short second life from 2003 to 2007, on a different company in the group. Popy's work passed to Bandai's boys' toy division. In 2024 it became part of Bandai's toy division. For the plastic model side of this story, see Mecha, Chogokin and the making of Gunpla.

Popy existed for under twelve years. In that time it set the form of the Japanese character toy. A licensed hero, a toy built around one screen action, a family of sizes and a sponsorship that shaped the show all became standard practice.

Soul of Chogokin and the fifty years

Bandai kept the Chogokin name alive through the 1980s and 1990s. In the late 1990s it began something new. A series called Soul of Chogokin remade the old robots for adult collectors, with modern engineering and finer detail. The first release was Mazinger Z.

The people who made it had played with Popy toys as children. They wanted to build the robots they had dreamed of, using tools their elders had not had. The series grew into a whole family of adult die-cast ranges, sold under the label TAMASHII NATIONS.

In 2024 Chogokin turned fifty. Bandai's collector arm held a CHOGOKIN 50th Anniversary Exhibition from 10 May to 1 July 2024. It ran at the TAMASHII NATIONS STORE TOKYO in Akihabara. More than a hundred items told the story from the first Mazinger Z onward.

The anniversary also brought a small surprise. Bandai revived the Chogokin Robocon, from the comedy show Ganbare Robocon, with a wind-up walking mechanism. The film below is the maker's own presentation of it.

The revival shows how close the modern ranges stay to Popy's first idea. A familiar hero, made in metal, does one thing from the show. The engineering has changed and the price has climbed, but the brief is the one written in 1974.

Popy in Tokyo today

A visitor to Tokyo can still follow Popy's trail. Akihabara is the first stop. The TAMASHII NATIONS STORE TOKYO sits in Kanda Hanaoka-cho, close to Akihabara station. It is the flagship of the ranges that descend from Chogokin.

The anniversary floor in 2024 showed the old toys beside the new. The film below walks through that exhibition. It gives a good sense of the scale of the line and the age range of the crowd.

Bandai's head office stands in Komagata, in Tokyo's Taito ward. The building was completed in January 1989. The company that set up Popy in 1971 still runs the brands Popy created from there.

For original Popy toys, Tokyo's collector malls are the place to look. Our piece on Nakano Broadway explains why a 1960s shopping mall became a library of old toys. Many of the figures on our shelves were found through that kind of patient Tokyo search.

Japan's care for old toys also explains why so many survive in good order. Families stored them in their boxes. Shops kept dead stock for decades. Our essay on why the world's treasures came to rest in Japan looks at that habit in full.

What we check on a Popy piece

A Popy toy is often fifty years old. It may be made of three or four materials, each ageing in its own way. We check each piece against the same list before it reaches our shelves. Our condition ranks explain how we grade what we find.

Our tin pieces need their own care. The care guide for tin toys covers storage, cleaning and handling. Die-cast toys like steady temperatures and low humidity. Polyethylene giants want shade, since sunlight fades their colours.

We also tell you plainly when a piece is less than whole. The Voltes V sold as found and the Volt in Box for restoration are offered as exactly that. The Daikengo Jumbo is missing its tail part, and the description says so.

Where the record differs

What we checked and left out

We checked dates, names and figures against company histories, Japanese press reports, collector histories and the records of the shows themselves. Where they disagree we have said so above. We have also left some things out.

  • Prices of the original toys in Japan and America. Old prices invite comparison with today's value, which we do not print.
  • Popy's turnover in money. We give the growth as a ratio instead.
  • Stories about specific factories that made Popy toys. We could not confirm them.
  • Claims that a given robot was the best-selling toy of its year. The figures do not allow a fair comparison.

Answered plainly

What does Chogokin mean?

It means super alloy. The word comes from the fictional metal in Mazinger Z, and Popy used it for its die-cast robots from 1974.

What is the difference between ST and DX Chogokin?

ST is the standard size, about 13 to 15 cm. DX is the larger Deluxe size, often with transforming or combining features.

Is a Jumbo Machinder made of soft vinyl?

Most are blow-moulded polyethylene, a tough and light plastic. It is often called vinyl in casual use.

Are Shogun Warriors the same toys as Popy's?

Many are. Mattel sold Popy's robots in America from 1977 to 1980, often with new names and safer missiles.

Did Popy make toys after 1983?

Popy became a division of Bandai in March 1983. Its lines continued under Bandai, and Chogokin is still made today.

A small company with a large shadow

Popy was born to sell in candy shops without stepping on its parent's toes. It found its way by listening to children. A boy wanted a belt that spun, so Popy made one. Children wanted a robot as big as the screen, so Popy made a giant, then a heavy metal one for the pocket. Our reading: Popy turned the character toy into a partner of television, and every Japanese robot on a shelf today still carries its design.

If the piece you want is not on our shelves, begin a private request and we will look for it in Japan.

With care from Tokyo,
The Japonista Curation and Concierge Team

Where next

Further reading

  • The 2009 book-length life of Katsushi Murakami, published in Japanese, for the designer's own account of Chogokin.
  • The Popy Memorial collector's volume from Hobby Japan, for photographs of the boxes and catalogues.
  • The 2017 book on robot cartoons and the toy business, for how Popy and the studios planned together.
  • Bandai's fiftieth anniversary materials for Chogokin, for the maker's own timeline.

References

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.