Tetsujin 28-go at Seventy: Nomura's Tin Robots and Their Revivals
The Japonista Curation and Concierge Team
In the July 1956 issue of Kobunsha's monthly magazine Shōnen, Mitsuteru Yokoyama began a serial about a giant iron robot, built for a war that ended before it could fight, and steered by whoever held its remote control. He called it Tetsujin 28-go. The serial ran until May 1966. In 2026 the robot reaches its seventieth year. The television series that made it a national figure first went out on Fuji TV on 20 October 1963, sixty-three years ago last week, and this summer all 97 episodes reached Blu-ray for the first time.
Collectors know the robot through a different object: a tin toy, about a forearm tall, that walks with a slow, shuffling step. The first of these were made by Nomura Toy, whose mark, TN, has its own line in our directory of Shōwa tin toy makers and trademarks. Then, from 1989 onwards, the same robots were made again in Japan, in tin, to the old patterns, so faithfully that a later piece can share the colours, the box art and sometimes even the TN mark of an original. The lithography alone cannot date a Tetsujin. Five things can: the maker's mark, the box, the licence sticker, the mechanism and the edition paperwork. The robots belong to the long pattern described in Japan's collectible culture engine, in which a single character is made, kept, remade and collected again.
A remote-controlled giant from Kobe
Yokoyama was born in Suma, Kobe, on 18 June 1934, and died on 15 April 2004. Hikari Production, the studio that manages his work, calls Tetsujin 28-go the forerunner of the giant robot manga. Its premise set the terms for much of what followed. The robot has no will of its own. In the television version, Dr Shikishima and Dr Kaneda build it at the army's request during the war, and afterwards it obeys the boy Shōtarō Kaneda, the son of one of its makers, because he holds the controller. The machine is good or bad according to the hands on the levers.
The animated series was produced by TCJ, the company now called Eiken. According to Eiken, its first season ran on Fuji TV from 20 October 1963 to 27 May 1965 and its second from 1 September to 24 November 1965, 97 episodes in all, counting a special origin episode broadcast between episodes 11 and 12. The theme song was written by Torirō Miki and sung by the Duke Aces. In the United States the producer Fred Ladd, with his partner Al Singer, licensed the series and retitled it Gigantor. Anime News Network, writing after Ladd's death in 2021, calls it the first super robot television anime shown in America. Ladd later directed an English version of the 1980 colour series as well. Cel collectors will know the period from our guide to anime production cels.
Quiz prizes before the shop counter
The earliest tin Tetsujin were never sold. On Nandemo Kanteidan, TV Tokyo's long-running appraisal programme, the toy collector Teruhisa Kitahara has appraised several of them. In a December 2017 episode he described a 1960 series given as prizes in a Shōnen reader quiz, brown with a silver belt and limited to 45 pieces, and a 1961 series, black with a yellow belt, limited to 25. He said that the 1961 robot is the only Tetsujin toy whose piston moves up and down inside the rocket on its back, and that it was never supplied with a box.
The accounts do not agree in every detail. In an August 2017 episode Kitahara described the 1960 prize robots as battery powered, made in a run of a few dozen, while the toys sold in shops were wind-ups. A brown robot of 1960 is probably the first wind-up walking Tetsujin. Both accounts agree on the important points. The prize robots came first, they were made in tiny numbers, and they reached their owners by post, not from a shop counter. A black-bodied Tetsujin with a yellow belt is therefore not automatically one of the 1961 prizes. A boxed example in those colours should be read on its own marks.
Nomura's numbered walkers
The robots that children could buy came with the television series. Kitahara has dated a battery-operated Nomura Tetsujin 28 No.1 to 1963, and collector catalogues place the No.2 and the No.3 in 1964. Collector records describe the No.2 as a battery walker about 33 centimetres tall, with a plastic face, a rubber nose and its battery box in the left leg, rolling forward on rollers while the legs swing. The No.3 is described as a wind-up whose rocket throws sparks behind a clear window, from a flint pressed against a turning file, with a lever on the chest to start and stop it.
Credit: Photograph, Japonista archive. Tetsujin 28-go character © Hikari Production.
Nomura was one of the houses that turned Japanese tin into a serious export. In the 1950s and 1960s the firm specialised in robot-themed metal toys, while the Japanese trade grew from simple penny toys into an industry of complex mechanical toys with moving parts and lights; a silver Nomura "Mechanized Robot" is now in the National Air and Space Museum in Washington. Nomura also worked economically. In an April 2026 episode Kitahara showed two 1960s Nomura robots pressed from the same tooling and turned into different toys by changing the printing and the action. For the Tetsujin collector this means that colour variants are normal, and that colour by itself proves little. The firm's wider world, from Masudaya to Horikawa, is mapped in our guide to Shōwa tin plate and soft vinyl.
The box as a clock
An original box often dates a robot more precisely than the robot itself. The clearest marker is the ST mark. The Japan Toy Association drew up its toy safety standard, and created the ST mark that shows a toy has passed it, in 1971. One collector who has compared No.2 boxes records examples printed with and without the mark, and notes that the licence sticker on the boxes with the ST mark is rectangular. A Tetsujin box carrying the ST mark was printed in 1971 or later, at least seven years after the model first appeared. That box is not a revival, but it is not the first issue either.
The licence sticker is the second clock. Its shape changed over the years, as the No.2 boxes show. Stickers peel easily from robots that were played with, so a missing sticker is common, and a sticker in perfect condition on a battered robot deserves a closer look. The third is the paperwork that belongs only to later issues: numbered certificates, catalogues and anniversary inserts. Why these small papers carry so much of the value is the subject of our essay on boxes, tags and proof in Japanese collecting.
Osaka's revivals, 1989 to 2017
The revival began with one collector. Nobuo Kumagai was born in Osaka in 1948, opened a shop for tin toys and antique objects in 1971, and in 1978 founded the Osaka Tin Toy Archive, a name sometimes rendered in English as the Osaka Tin Toy Museum. In 1989 the Archive began reissuing the Tetsujin 28 No.1, commissioning the work from Marumiya, a workshop that could still press tin toys, and later from its successor, Metal House. Over the following decades it made about forty tin models, most of them walkers, until Metal House closed in 2017. With that closure, Japanese production of tin toys came to an end.
Collector catalogues give the Tetsujin sequence in detail. The No.1 reissue of 1989 was limited to 500 pieces and sold out on reservation, and later runs came in blue, brown and silver. The No.2 followed in 1992, the No.3 in 1996, and anniversary versions of the No.1 in black, gold, dark brown and silver at the end of the decade. The No.5 of 2003, limited to 500 pieces, carries the TN mark, used under licence. This is why a TN mark on its own does not prove a 1960s robot. In 2023 the Osaka publisher Sogensha issued Kumagai's illustrated reference to Japanese tin toys, with more than a thousand toys, a chapter on revivals and an appendix of maker's marks.
Credit: Photograph, Japonista archive. Tetsujin 28-go character © Hikari Production.
The Osaka robots are collectable in their own right. They were made by the last generation of Japanese tin craftsmen, in limited and recorded numbers, and they have their own scarcities: a colour made in 250 pieces, or an anniversary model with its small walking figure. Our numbered brown revival is one of them. They should be described as what they are.
Billiken's Aoyama wind-ups
The second family comes from Tokyo. Billiken Shokai opened in May 1976 on Kottō-dōri in Minami-Aoyama, a street of antique shops in the district covered by The Tokyo Atlas, and describes itself as Japan's first shop devoted only to old toys. From 1983 it made soft vinyl kits of monsters and heroes, the lineage traced in our guide to kaiju in soft vinyl. In the 1990s it added its own tin wind-ups of Shōwa characters. Collector records date its blue and green Tetsujin to 1994, with a limited figure of Shōtarō in 1995 and an electric remote-control version as well.
Credit: Photograph, Japonista archive. Tetsujin 28-go character © Hikari Production.
Billiken did not copy a single Nomura model. Its robots are interpretations, marked BILLIKEN and MADE IN JAPAN, in proportions and colours of their own. They are the easiest family to identify, and the most often misdescribed by people who see only a blue tin robot with a Shōwa box.
Four families on one table
| Family | Years | Marks to look for | Box and papers | Numbers |
|---|---|---|---|---|
| Nomura prize robots | 1960 and 1961 | Brown with silver belt (1960); black with yellow belt (1961) | No box was supplied with the 1961 robot | 45 and 25, as appraised on television |
| Nomura No.1 to No.3 | 1963 to 1964, with later boxes | TN mark, licence sticker, model number on the box | Boxes printed with an ST mark date from 1971 or later | Open production |
| Osaka Tin Toy Archive revivals | 1989 to the 2010s | Archive marking; the No.5 of 2003 carries a licensed TN mark | Certificates, catalogues, anniversary figures | Recorded runs of 250 to 750 per colour |
| Billiken Shokai wind-ups | From 1994 | BILLIKEN and MADE IN JAPAN | Billiken box and insert | Limited runs |
In practice we read a robot in a fixed order. First the base and back, for the maker's mark and any revival marking. Then the box: model number, maker's name, ST mark, the shape and wording of the licence sticker. Then the mechanism, because a battery walker and a sparking wind-up are not interchangeable, and a replaced motor changes the description. Then the paperwork, which belongs only to revivals and later issues. Condition comes last, measured against the scale in our grading and condition guide. A robot that passes every check can be called by its maker and year. One that fails any of them is described by what it shows.
Where the robot stands now
Yokoyama's city has made the robot its emblem. In Wakamatsu Park, in Kobe's Nagata ward, a Tetsujin 28-go monument stands 15.3 metres tall and weighs about 50 tonnes. Its height, if the robot stood upright, would be 18 metres. Local shopping streets formed the KOBE Tetsujin Project to build it as a symbol of recovery from the 1995 earthquake, and it was unveiled in October 2009. To mark the unveiling, an exhibition of Shōwa toys, magazines and records, with tin Tetsujin among them, was held beside the park. The full-size statue belongs with the other giants in our guide to life-size display figures.
The Kobe monument at its unveiling in October 2009, and the exhibition of Shōwa toys held alongside it, including tin Tetsujin. Credit: Jiji Press news video, embedded from its official channel.
The seventieth year has brought a new generation of figures, a remastered television series and new collectors who met the robot through later giants such as the Jumbo Machinder. The tin robots stay at the head of the line. They come in three families, each honest when it is described correctly: Nomura's originals, made for children who had just seen the robot on television; the Osaka revivals, made by craftsmen at the end of Japanese tinplate; and Billiken's Aoyama wind-ups. The task for the collector is to know which one is on the table.
For the company that made those giants and the die-cast Chogokin robots, including a Deluxe Tetsujin of its own, see our history of Popy.
Frequently asked questions
When did Tetsujin 28-go first appear?
Mitsuteru Yokoyama's serial began in the July 1956 issue of Shōnen, published by Kobunsha, and ran until May 1966. The television series began on Fuji TV on 20 October 1963. In the United States it was shown as Gigantor.
Who made the original tin Tetsujin toys?
Nomura Toy, whose mark is TN. It made prize robots for a Shōnen reader quiz in 1960 and 1961, and robots for sale from 1963, including the No.1, No.2 and No.3.
Does a TN mark prove that a Tetsujin is from the 1960s?
No. The Osaka Tin Toy Archive's No.5 revival of 2003 carries the TN mark under licence. Read the mark together with the box, the licence sticker, the mechanism and any edition paperwork.
Is a revival Tetsujin worth collecting?
Yes, when it is described as a revival. The Osaka robots were made in Japan, in tin, in limited and recorded runs between 1989 and the 2010s, and they are now the last Japanese tin toys of their kind.
Looking for a particular Tetsujin: a Nomura No.1, a boxed No.3, or a revival in a scarce colour? Tell us the model and the condition you want. Our team in Tokyo will look for it and report back with photographs of the marks, the box and the mechanism, examined under our authenticity guarantee.
Ask the Hunting Salon Browse Japanese toys and cross-cultural collectibles
References
- Mitsuteru Yokoyama Official Web (Hikari Production), Tetsujin 28-go original edition
- Mitsuteru Yokoyama Official Web, profile and chronology
- Kobunsha, Tetsujin 28-go, publication details
- Eiken, Tetsujin 28-go, broadcast dates, staff and episodes
- MANTANWEB, Tetsujin 28-go on Blu-ray for the first time, 25 March 2026
- HOBBY Watch, BRICKROID Tetsujin 28-go review, on the seventieth anniversary, 2026
- Anime News Network, Remembering Anime Pioneer Fred Ladd, 14 August 2021
- TV Tokyo, Nandemo Kanteidan, tin Tetsujin 28, 12 December 2017
- TV Tokyo, Nandemo Kanteidan, tin Tetsujin 28, 29 August 2017
- TV Tokyo, Nandemo Kanteidan, tin Tetsujin 28, 18 February 2020
- TV Tokyo, Nandemo Kanteidan, tin robots by Nomura, 14 April 2026
- Smithsonian National Air and Space Museum, Nomura tin toy robot, "Mechanized Robot"
- Japan Toy Association, the ST mark and toy safety standard
- Sogensha, Nobuo Kumagai, illustrated reference to Japanese tin toys, 2023
- Wikipedia (Japanese), Osaka Tin Toy Archive, collector reference
- Character Goods Institute, Tetsujin 28 toys by the Osaka Tin Toy Archive, 14 July 2022, collector catalogue
- Jidaiya Chitoseame, Nomura Tetsujin 28 No.2, collector study of boxes and variants
- Billiken Shokai, billiken-note, on the opening in Minami-Aoyama in 1976
- City of Kobe, Nagata Ward, Tetsujin 28-go monument
- Jiji Press, full-size Tetsujin 28-go unveiled in Kobe, 4 October 2009
Further reading
- Horikawa and the SH robots, for the Tokyo maker whose battery robots stood beside Nomura's in the 1960s
- Tokusatsu heroes, for the costumed champions who followed the robot onto Japanese television
- Pokémon cards at thirty, for another anniversary object where small marks separate a first issue from what came after
- Exhibition showpieces and life-size icons, for the full-scale figures, Tetsujin among them, that turn a character into architecture
- Limited edition collectibles, for numbered Japanese editions, including revivals made in recorded runs
- The Fashionista Bible, for the house reference that ties every Japonista world, toys included, to one way of reading objects