Omega Constellation: the Pie-Pan, the Manhattan, the Observatory and Japan

A chronometer for everyone

The Constellation turned a limited anniversary watch into a standing range of certified chronometers. Omega launched it in 1952 as the world's first family of watches that were all chronometer certified. Before it, a chronometer certificate was a mark carried by a few special pieces, not by a whole line in the shop window. The house later wrote that the Constellation quickly became known as "the Swiss watch". Its sales staff wanted a precise automatic that a successful buyer could wear every day. The early cases were sealed against water, and the movements carried a central seconds hand, two features the American market asked for. The first Constellation was not a slim dress watch: its bumper movement made it a fairly thick one. See also: the Omega house history, for the families beside the Constellation, and the Watch Almanac, for Omega's place among the houses.

The Centenary of 1948

The Constellation's direct ancestor is the Centenary, made for Omega's hundredth year. It was designed by René Banwart, who also drew the first Seamaster and later founded Corum. Omega gives its production as 6,000 pieces, all in solid gold. It carried a chronometer version of the house's first bumper automatics, calibres 330 and 340. Those movements were the work of Omega's own engineers in the 1940s, after the house had fallen behind rivals in self-winding watches. The Centenary sold well, and the sales department pressed for a regular model built on the same idea. The result was the Constellation, with a central seconds version of the movement in place of the Centenary's small seconds. Our reading: the Centenary proved the demand, and the Constellation turned it into a catalogue.

Eight stars on the back

The name comes from the emblem on the caseback: an observatory under a ring of eight stars. The stars stand for Omega's results in the precision trials of the era. Accounts differ on what each star counts. The house speaks of eight records, while another account counts two records and six first places, won between 1933 and 1952. We print both. The emblem has appeared on Constellation backs since 1952. Early solid-gold cases had the observatory engraved by hand, while steel cases carried a gold medallion set into the back. A correction to the common story: the dome is usually called the Geneva Observatory, but Omega's own museum calls it more likely a generic observatory. See also: a solid-gold Constellation, reference 153.015, for the gold side of the family.

A name it could not use in America

The Constellation name was proposed by Bruno Passoni, head of Omega's Italian agent, to the house's sales manager. In the United States, another company had already registered the name. Omega's American agent therefore sold the early chronometers as the Globemaster. The naming problem was resolved by 1956, but some models for North America kept the Globemaster name after that. The name came back in 2015 for a new watch with pie-pan styling. Early references such as the CK 2648 and CK 2652 belong to these first years. The 2652 already had a gasketed back and a metal tension ring holding the crystal, a sealing method borrowed from the Seamaster. Our reading: an early American Globemaster is a Constellation in all but name, and the papers will say so.

Bumpers, rotors and a thinner watch

The Constellation's movements changed every few years, and each change made the watch thinner. The first models used calibres 351, 352 and 354, bumper automatics in which the rotor swung through about 120 degrees and bounced off springs. The system was invented by the English watchmaker John Harwood in 1923. Owners could feel a slight thud as the rotor struck its spring, which gave the bumpers their name. Bumpers were efficient enough, but the thick rotor made the watch tall at a time when rivals were slimming their automatics. See also: the Omega Speedmaster, for the hand-wound line of the same decade, and Longines, for a rival that also chased chronometer prizes.

The full rotor

The bumpers gave way to full-rotor automatics in the mid-1950s. One account dates the change four years after the launch, to calibres 500, 501 and 505. Another places the new family, calibres 470, 490 and 500, in 1955. We print both. The new rotor turned through a full circle, and a rocker switched its direction to wind the spring. That switching rocker wound less efficiently than later designs, so Omega made the rotor heavy to compensate. The 500 family is still prized for its large balance and its robust build. Our reading: a 500-series Constellation is the first version that winds like a modern automatic.

Calibre 550 and the 1960s

The 550 family, announced in 1958, was the movement that made the Constellation a complete everyday watch. It kept a width of 27.9 mm but cut the thickness by a millimetre, to 4.5 mm. Its designers were Marc Colomb and Henri Gerber. They replaced the switching rocker with a compact reverser and dropped the screws from the balance, which raised its inertia and its precision. Calibre 561 added the date, and calibre 564 followed. Omega's own chronometer tests show how long these watches can hold their rate. A steel Constellation with calibre 564 passed its chronometer test on 25 August 1969 and passed again on 25 October 2005, with an average daily rate of plus 4.9 seconds. Our reading: the 1960s calibres are the reason vintage Constellations still run to the standard printed on their dials. See also: a Constellation of 1966 with calibre 561, and a gold-capped chronometer of 1966.

The pie-pan dial

The pie-pan dial is the feature most collectors use to name an early Constellation. It is a domed dial whose outer ring, between the hour markers, is cut into twelve sloping facets. The shape looks like an upturned pie dish, which gave the dial its collectors' name. Most pie-pan watches share dauphine hands, a central seconds hand, faceted crowns and curved "dog-leg" lugs. Not every dial of the period is a true pie-pan, and some references show an almost flat dial without facets. Markers changed too, from faceted arrows to sticks, and in the 1960s to black onyx inlays. Our reading: buyers should judge the dial in raking light, because a flat dial on a pie-pan reference is a variant, not a fault. See also: the Patek Philippe Calatrava, for another round dress watch of the decade.

Three grades of finish

The early Constellation came in three finishing levels, all with the same movements inside. The standard watch came in steel or gold, the de Luxe in richer finishes, and the Grand Luxe at the top. A Grand Luxe of 1953, reference OT 14.355, had a case and bracelet in 18-carat rose gold and came in a silver box. The Grand Luxe bracelets were brick-patterned gold links. One rarer dial, made in a small batch commissioned in 1954, shows the observatory in cloisonné enamel by the dial maker Stern Frères. That watch, reference OT 2699, has an 18-carat case of 35 mm and calibre 354. Our reading: the finishing level matters more to value than the reference number, and the papers or the case marks should confirm it.

Omega used three numbering systems in these years: two letters and four digits before 1962, five digits from 1958 to 1962, and three digits with a dot from 1962. The overlap explains why a single model can appear under two reference styles. See also: Rolex reference numbers explained, for how another house coded its watches.

The observatory contests

The Constellation was sold on the strength of results won in public precision contests. Observatories in Switzerland and Britain tested movements for weeks in several positions and temperatures, and published the rankings. Geneva's competition began in 1872, and Neuchâtel's observatory was founded in 1858, with tests from 1860. After the Second World War, a small group of houses, Omega, Longines, Zenith and Ulysse Nardin among them, held most of the top places. The results were advertising as well as science, because they backed every claim a house made about precision. Our reading: the eight stars are an advertisement for those results, and the contests explain why the watch exists. See also: Zenith, another regular winner at the observatories.

Kew-Teddington, 1933 and 1936

Omega's best-known records came in Britain, at the Kew-Teddington Observatory. In 1933 Omega set precision records in every category there, and it repeated the feat in 1936. The 1936 record was set by a 47.7 mm calibre adjusted by the regulator Alfred Jaccard, which scored 97.8 points out of 100. Omega says that score has never been beaten. The trial watches were not wristwatches; they were large precision movements built and adjusted for the contest. Our reading: the Constellation brought the prestige of these big movements down to the wrist, which is what made it new.

The Japanese challenge, 1964 to 1968

Seiko's entries ended the Swiss observatory contests for wristwatches within five years. Seiko's companies Suwa Seikosha and Daini Seikosha first entered Neuchâtel in 1964 and placed only 144th and 153rd. They placed ninth in 1966, then made a breakthrough in 1967. That year, Daini Seikosha's mechanical watches were beaten only by an Omega chronometer, ahead of Longines, Zenith and Girard-Perregaux. Seiko took second and third places in the company prizes for mechanical watches. See also: King versus Grand, for the Seiko factories behind those entries, the Seiko house history, and Girard-Perregaux, one of the houses Seiko passed in 1967.

Omega's intention to withdraw

The Japanese advance alarmed the Swiss houses before the 1968 contest began. A report by the Neuchâtel observatory's management, dated 27 September 1967, recorded that Omega had stated its intention to withdraw from the contest from 1968. Zenith signalled a similar intention. In 1968 Neuchâtel dropped its wristwatch chronometer class, the most important category. The number of bulletins it issued fell from 1,166 in 1967 to 203 in 1968. Defossez, a leading voice of Swiss chronometry, argued in 1969 that the contests should go on. Our reading: the Constellation's medallion celebrates a system that Omega itself was ready to leave when it began to lose.

Geneva, 1968

Seiko's last blow came at Geneva in 1968, in its first appearance there. Suwa Seikosha's movements took fourth to tenth places, the highest ranking for mechanical wristwatches. The top three places in the wristwatch class went to Swiss quartz watches. Geneva then stopped its contest as well. The trials that had given the Constellation its stars ended in the same year that quartz and Japan both reached the top. Seiko applied the lessons from the contests to its high-beat Grand Seiko calibres. See also: Grand Seiko and Credor, for the watches that came out of those trials.

The C-shape and the Genta question

In 1964 the Constellation changed its silhouette entirely, while the pie-pan stayed in production. The new case looked like two letters C set back to back, with lugs folded into the case sides. The dial was cleaner, with slim baton hands and applied markers. The C-shape gave the watch a larger look at about the same diameter, which suited a decade that was starting to like bigger cases. Collectors date the C-shape era from 1964 to 1978. The main changes came with each new movement: 561, then 564, then the day-date 751, then the 1000-series calibres. See also: a C-shape 168.017 of 1970 with calibre 564, and a C-case 168.0056 with calibre 1011.

Who drew it

The C-shape is now credited to Gérald Genta, but the evidence arrived late. In 2009 Genta's widow, Evelyne, confirmed that he had designed case 14900 and the C-shape 168.009, and the onyx markers. Genta worked under Pierre Moinat in Omega's creations department from about 1960, and left around 1965. He was paid as little as 15 Swiss francs per design. At that time Omega's museum had no direct evidence that Genta had drawn a Constellation. More recently, Omega has acknowledged Genta as the designer of the C-line. Our reading: the attribution is now safe for the C-shape case, but less certain for single dials and parts. See also: Gérald Genta, for the designer's own house and later work.

Bracelets before the Royal Oak

The late 1960s also gave the Constellation integrated bracelets. References BA 368.0847 for men and BA 768.0803 for women used a system that Pierre Moinat invented and patented in 1964. The watches made their debut in 1969, sold as the first with bracelets truly integrated with the case. Two inner links slot into the case, so the bracelet cannot be swapped for another. They came three years before the steel sports watch that made the integrated bracelet famous in 1972. Our reading: the Constellation tried the integrated bracelet early, but as a dress watch, not a steel sports watch. See also: the Audemars Piguet Royal Oak, for the 1972 watch that took the idea into steel.

Quartz at the top

Omega answered the end of the contests by putting quartz inside the Constellation. At the Basel fair of 1970 it showed three lines of quartz watches, among them the Constellation Electroquartz f8192 Hz in a rounded square gold case. That watch used the Swiss Beta 21, a thick quartz movement. Its domed plastic crystal made the case look thinner, but it scratched easily and was falling out of favour. In 1972 Omega launched the Constellation Megaquartz, with a sapphire crystal and a two-piece case without a bezel. In 1977 the Constellation Chronometer Quartz Crystal arrived with Omega's own thin quartz, the 1340 family, and an eight-sided bezel. Our reading: quartz gave the Constellation back the thin case that the bumper years had denied it. See also: the Seiko Astron, for the first quartz wristwatch of 1969.

The Marine Chronometer of 1974

The most accurate Constellation ever made is a quartz watch certified as a marine chronometer. Omega put 30 million Swiss francs into its Megaquartz project and built an oscillator that ran 288 times faster than the Beta 21's. The first calibre, the 1500, drew so much power that its battery lasted only five weeks. By 1972 the problem was fixed in calibre 1510, and in 1974 calibre 1511 went to the Besançon Observatory for 63 days of testing. Omega says the watch varied by less than 0.002 seconds a day and remains the first and only wristwatch certified as a Marine Chronometer. The watch, reference ST 398.0836, came with a detailed certificate and its movement number on a plaque at the end of the case. About 7,000 were made before production ended in 1980. Our reading: the Marine Chronometer is the purest Constellation, because it is the one that won its precision claim outright.

Hour hand, hack button and gold trim

The Marine Chronometer was built so that its seconds hand never had to be disturbed. An independently adjustable hour hand let the wearer change time zones without stopping the watch. A small button beside the crown paused the seconds hand, so the watch could be set against a radio time signal. The plaque and a screwed bezel were in 14-carat gold on a steel case. French examples were made in steel only, because French law required a visible hallmark on any gold. A handful of all-gold examples were made as a rare limited edition. Our reading: a French steel example is a variant to check against its certificate, not a later replacement bezel. See also: Japanese gold and platinum hallmarks, for how gold is marked on watches sold in Japan.

The Manhattan and its claws

The Manhattan of 1982 gave the Constellation the look that defined it for the next forty years. It had a barrel-shaped case with half-moon facets at top and bottom, an integrated bracelet, and four claws at the sides of the bezel. The claws held the sapphire crystal and its gasket firmly against the case, which made the watch water resistant. The hour markers were printed under the crystal, so there was no separate bezel or applied index. The first models ran on calibre 1422, a very thin quartz movement developed with ETA. In 1983 calibre 1431 added a servo-controlled stepping motor, a world first for a quartz movement. Our reading: the claws were a seal before they were a signature, and that is why they are on every generation. See also: Swatch, 1983, for the other Swiss answer to quartz in the same years.

Carol Didisheim and the bathroom mirror

The Manhattan was drawn by Carol Didisheim, who joined Omega in 1980 at 26, straight from her studies in jewellery design in Geneva. She sketched many models, and the Manhattan was one among them. A glass factory had sent Omega samples of a new technique for printing under glass. The product director, Pierre-André Aellen, saw how to fix the crystal without a bezel while shaving: his unframed bathroom mirror was held on the wall by eight claws. Didisheim then drew the claws and a hinged bracelet to match their rhythm. Omega received a patent for the design in 1985, three years after launch, with Didisheim named as inventor. Aellen died in the Swissair crash near Nova Scotia in 1998. Our reading: the Manhattan is a rare case where both the designer and the engineering idea are on record.

The film above shows today's claws and half-moon case, forty years after the first sketch.

Automatic again

The Manhattan began as a quartz watch, but mechanical versions followed quickly. In 1984 Omega added an automatic calibre, the 1111, based on an ETA movement. The second-generation Manhattan of 1995 offered both quartz and automatic movements, with a raised bezel and crystal and water resistance of 50 metres. By then the Roman numerals sat on the bezel, a detail every later generation kept. The Manhattan also became one of Omega's best-known ladies' watches. Our reading: on the shelf, the quartz Manhattan is common and the early automatic is the one to look for. See also: a Co-Axial Constellation of 2016 in steel and gold, for the modern descendant.

My Choice: 1995 to 2009

In the 1990s the Constellation became the watch Omega used to introduce its ambassadors. In 1995 the house began working with brand ambassadors, the supermodel Cindy Crawford first among them. The announcement came in Las Vegas, and Omega was among the first watch houses to name an American woman as its ambassador. Crawford helped choose the designs, and the relaunched women's Constellation became known as "Cindy's Choice". That grew into the My Choice campaign, in which each poster showed an ambassador, a Constellation, and only two words of text. Our reading: My Choice made the Constellation Omega's most visible watch for women, which is why so many ladies' pieces reach the shelf today. See also: the full set: box and papers, for what the original papers add.

The Double Eagle and the 2009 redesign

In 2003 the Constellation took Omega's Co-Axial escapement into the Manhattan line. The third-generation model, called the Double Eagle, used calibre 2500 and had broad, flat claws blended into the bezel. In 2009 Omega redesigned the whole line again. The new models refined the claws, added "Mono Rang" bracelets with butterfly clasps and offered dials from silver to mother-of-pearl. The redesign also put Co-Axial movements across the range, after the in-house calibre 8500 of 2007. One account calls the 2009 style more feminine than the generations before it. Our reading: Double Eagle pieces are the most technical of the middle years, and their claws make them easy to tell apart.

The Globemaster and the Master Chronometer

In 2015 Omega used an old Constellation name to launch a new precision standard. The Globemaster was the first watch certified as a Master Chronometer, a test developed by Omega with METAS, the Swiss Federal Institute of Metrology. The test checks the watch in six positions, at different levels of power, and through exposure to a magnetic field of 15,000 gauss. The watch must run between 0 and plus 5 seconds a day. The Globemaster's pie-pan dial echoes the Constellation of 1952, and its fluted bezel follows a collectors' favourite of 1968. Its hour hand jumps forward or back by one hour, a useful feature for travellers. Our reading: the Globemaster is the Constellation's old promise, a tested chronometer, brought up to modern standards.

The film above is Omega's own launch of the Globemaster and the Master Chronometer test.

A fluted bezel and an old argument

The Globemaster's fluted bezel drew complaints at its launch that Omega was copying a rival. The complaint fails on the record, since Omega had used fluted bezels on Constellation models of the 1960s. Several C-shape references, including 168.027 and 168.029, carry fluted bezels. The steel Globemaster of 2015 has a 39 mm case, and its movement is calibre 8900 or 8901. See also: collectible watches, for Constellations and other watches graded in Tokyo now.

The fifth generation

The 2020 update kept the Manhattan's outline and changed nearly every surface. Omega called it the fifth refresh of the line since its signature look appeared in 1982. The gents' models gained polished, bevelled edges on the case, claws and bracelet, slimmer bezels and claws, and redesigned Roman numerals. The new hands and markers took their triangular facets from New York's Freedom Tower. A trapezoid date window sits at six o'clock beneath the star. Every gents' model received a Master Chronometer movement, calibre 8800 or 8801, running at 25,200 vibrations an hour. The ladies' collection had received its own makeover in 2018. Our reading: the fifth generation finished the move from a quartz fashion watch back to a certified mechanical one. See also: Chopard, for another integrated-bracelet line, and Japanese condition ranks, for grading a bracelet watch.

Sizes and the Meteorite

Accounts differ on the launch sizes of the 2020 gents' line. One counts 26 new models, all in 39 mm cases, while another lists a 36 mm size beside the 39 mm. We print both. The cases came in steel, 18-carat yellow gold or Omega's Sedna gold, alone or combined. In 2024 Omega added the Constellation Meteorite, with dials cut from real meteorite, so that no two patterns match. The 41 mm version uses calibre 8900. The Manhattan line also runs to smaller sizes for women, from 24 mm upwards. Our reading: on the modern shelf, size is the first filter, because the same name covers watches from 24 to 41 mm.

Precision without a seconds hand

In March 2026 the Constellation became the first two-hand watch to earn Master Chronometer certification. Until then, a chronometer test needed a seconds hand, because the laboratory photographed its position once a day. Omega's Laboratoire de Précision, announced two years earlier, replaced the photograph with sound. A wireless testing unit records each tick of the movement through the full 25 days of testing, along with temperature, position, magnetic fields and air pressure. Optical tracking of the hour and minute hands completes the test, which METAS certifies. The laboratory is accredited for the Chronometer test and certified by METAS for the Master Chronometer. Our reading: the test that the Constellation helped make famous has now been redesigned around it. See also: Grand Seiko, for Japan's own precision standard, discussed below.

Nine references, two calibres

The Constellation Observatory collection has nine references, all 39.4 mm across. It uses two new calibres: 8915 for the gold and platinum watches, and 8914, a rhodium-plated version, for the steel ones. Omega grades the collection Standard, Luxe and Grand Luxe, reviving the finishing levels of the 1950s. The dial has guilloché facets on a pie-pan, faceted kite-shaped indexes and dauphine hands, and the case has dog-leg lugs. A nine-row brick pattern on the gold mesh bracelet recalls the brick bracelets of the early years. The observatory medallion is applied to the back, as it has been since 1952. Our reading: the 2026 watch is a quotation of the 1950s Grand Luxe, with a test the 1950s could not have imagined.

The short film above is Omega's own introduction to the acoustic test behind the 2026 collection.

Japan and the Constellation

Japan shaped the Constellation's story from the far side of the observatory contests. The first Grand Seiko of 1960 was tested in-house to a standard equal to the superior grade of the Swiss official chronometer bureaux. In 1966 Seiko set its own Grand Seiko Standard, stricter than the Swiss chronometer rule. It began at plus 6 to minus 3 seconds a day and was tightened in 1969 to plus 5 to minus 3. Half a century later, Omega's Master Chronometer test asks for 0 to plus 5 seconds a day. Our reading: Japanese and Swiss makers have spent sixty years answering each other's precision claims, and the Constellation is one side of that conversation. See also: Ginza and the watch, for the street where both houses sell, and our private request service, for one particular reference found in Japan.

Omega in Ginza

Swatch Group Japan, which presents Omega in Japan, is based in Ginza, in the tower named after Nicolas G. Hayek. In April 2022 Omega named the model and actress Kiko Mizuhara as an ambassador, joining Cindy Crawford, Kaia Gerber and Nicole Kidman. Mizuhara made her debut as a model in 2003 and as an actress in 2010. In Japan the Constellation has been studied in long histories, from the bumper calibres to the fifth-generation Manhattan. The steel watch of 1969 that passed its chronometer test again in 2005 was shown to Japanese readers in 2020. Our reading: Japanese collectors know this line well, which is why the shelf below is so deep.

Know the watch at a glance

Each Constellation era can be told apart by its case and its movement before reading any number. The table below gives the quickest tells for each.

The caseback medallion confirms the family on all of them, but not the era. A pie-pan dial on a C-shape case, or a claw case with a bumper calibre, means parts from two watches. See also: how we grade condition, and our authenticity guarantee.

The shelf in Japan this week

The Constellation shelf in Japan is mostly quartz, mostly modern and very often a lady's watch. On 30 October 2026 we read the titles of 996 of the 2,569 Constellation lots then on offer in Japan. About one title in two named a quartz movement, and about one in three a self-winding one. About two in five were ladies' watches, and about one in four mentioned diamonds. About one in eleven named the chronometer certificate, and about one in twelve a guarantee card. The C-shape was named in about one title in forty, and the Double Eagle in about one in forty. The Manhattan name appeared only twice and the pie-pan once, because Japanese titles rarely use either term. The references named most often were quartz pieces of the 1990s and 2000s, with the C-shape 168.017 the most named vintage reference. Our reading: the early pie-pan chronometers are hidden in plain sight, listed by reference or calibre rather than by dial. See also: Cartier watches in Japan, for another house whose ladies' pieces fill the shelf.

Where the record differs

  • The eight stars: eight records in the house account; two records and six first places, from 1933 to 1952, in another.
  • The dome on the medallion: popularly the Geneva Observatory; probably generic, in the Omega museum's view.
  • The first full-rotor calibres: four years after launch, as 500, 501 and 505; or 1955, as the 470, 490 and 500 family.
  • Calibre 561: in 1966 by one account; in the C-shape 168.009 from 1964 by another.
  • The American name: Globemaster from 1953; the naming problem settled by 1956, with some later American models still called Globemaster.
  • Genta and the C-shape: confirmed by his widow in 2009 when Omega had no direct record; acknowledged by Omega more recently.
  • The 2020 sizes: 39 mm only in one account; 36 and 39 mm in another.
  • The fifth generation: launched in January 2020, or across 2019 and 2020.

What we checked and left out

  • Production figures for the first references: we found one number, from a single collector's guide outside our list, and did not print it.
  • The claim that the Constellation outsold Rolex's Datejust in the 1960s: we found no sales figures to confirm it.
  • The designer of the steel-case medallion: the name appears in one account only, in transliteration, and we could not confirm its spelling.
  • A Tokyo Constellation event of 2010 with a film star: the only record was a personal blog.
  • Any Constellation link for the 2022 Japan ambassador: none was announced.
  • Sale prices, past and present: left out, as on all our pages.

Why the Constellation matters

The Constellation is the watch that sold certified precision to the general public. Its medallion records the Swiss observatory contests, and its history shows how those contests ended: Seiko's watches climbed the tables until Omega and Zenith spoke of withdrawing, and the wristwatch classes closed in 1968. Omega then pursued precision through quartz, with a Marine Chronometer that no other wristwatch has matched. The Manhattan's claws turned a technical seal into a forty-year signature. The Globemaster and the Observatory brought the certificate back to the centre of the line. Our reading: buy the Constellation for the certificate it carried in its own decade, and read the medallion as the record of a contest. The Constellation is Omega's longest argument that a watch's precision should be tested, published and worn. That is our reading.

Answered plainly

When was the first Constellation made?

In 1952, as a family of chronometer-certified automatics.

What do the eight stars mean?

Omega's precision results in the observatory trials; accounts differ on whether all eight were records.

What is a pie-pan dial?

A domed dial whose outer ring is cut into twelve facets, like an upturned pie dish.

Who designed the Manhattan?

Carol Didisheim, in 1981, with the claw idea from product director Pierre-André Aellen.

What is special about the 2026 Constellation Observatory?

It is the first two-hand watch certified as a Master Chronometer, tested by sound rather than by its seconds hand.

Seen elsewhere

Further reading

References

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.