Seiko History: Hattori, Seikosha, Suwa, Daini and the Astron

Kintaro Hattori opened his own repair shop in 1877 and founded K. Hattori in 1881, and every Seiko made since descends from that firm. Our pillar on Japanese horology sets Seiko among the country's other makers, and the Watch Almanac places it among the world's watch houses. The Ginza corner where the house began is the subject of our walk through Ginza and Wako.

The house is easier to read once one fact is clear: for most of the twentieth century there was no single Seiko factory. Watches came from two sister companies, one in eastern Tokyo and one in the mountains of Nagano, and both sold under the Hattori name. Grand Seiko, King Seiko, Credor, the Five and the Astron all make sense once you know which of the two made them.

Seiko in brief

The table below gives the dates that anchor the house; each is taken up in the sections that follow.

Hattori and the Ginza shop

Kintaro Hattori was born on 21 November 1860 in Uneme-cho, Kyobashi, a few streets from the Ginza crossing his firm would later own. He began his commercial training at thirteen, and a year later went to Kobayashi Denjiro, one of the leading clock and watch traders in Tokyo, with practical work at the Kameda clock shop. In 1877, aged about seventeen, he opened his own repair business, and in 1881 he founded K. Hattori to sell and repair clocks and watches.

Trading through Yokohama

Japan had dropped its old seasonal hours for fixed Western time in 1872, and the traditional clocks made for nearly three centuries became useless overnight. Demand for imported timepieces grew fast, and at twenty-five Hattori began trading with the Swiss firms based in Yokohama, wholesaling and retailing their watches. He earned the trust of the foreign trading houses, and the business grew quickly on that trust. By 1890 the firm was importing directly from the United States, without the Yokohama middlemen.

The first clock tower, 1894

In 1894 Hattori bought the former Choya Newspaper building on the corner of Ginza 4-chome and had Tamekichi Ito, an architect trained in earthquake-resistant building in the United States, extend it with a clock tower. The tower stood about 15 metres high, its bell sounded every half hour, and it served Ginza for 27 years until it was taken down in 1921. The retail side of the business became Wako in 1947, and Wako moved into the clock tower building in December 1952.

Seikosha and the first factory

In 1892 Hattori set up Seikosha, roughly the house of exquisite workmanship, to make clocks rather than only sell them. It began with wall clocks, and within a few years it was the largest wall clock maker in Japan. The firm made its own parts in-house, a habit of vertical integration that runs through the whole later history of the house.

Timekeeper and the alarm clock

The first pocket watch, the Timekeeper, followed in 1895, and alarm clocks in 1899. Branches opened in Shanghai and Hong Kong in 1905, and in 1909 the factory built an automatic pinion lathe of its own. During the First World War Seikosha shipped about 900,000 alarm clocks to Britain and France, whose own makers had turned to war work. In 1917 the firm became a limited company, K. Hattori & Co., Ltd.

The Laurel of 1913

The Laurel of 1913 was Japan's first wristwatch, built on a 12-ligne movement about 26.65 millimetres across. Shrinking a pocket movement to that size was hard with the tools of the day, and the work pushed Seikosha's design and machine tooling forward. In 2014 the Japan Society of Mechanical Engineers listed the Laurel as Mechanical Engineering Heritage, with the first Grand Seiko and the Astron.

The earthquake and the name

September 1923

The Great Kanto Earthquake of 1 September 1923 destroyed the firm's factories and shops, along with the watches customers had left for repair. Seikosha was making clocks again by November, and the firm replaced the lost repair watches with new ones at no charge. The work on a new Ginza building, halted by the disaster, did not start again until 1929.

Seiko on the dial, 1924

In 1924 the first wristwatch with the word Seiko on its dial left the rebuilt factory. The word means exquisite in Japanese and sounds the same as the word for success, and it shortened the factory name into a brand. The house marked the centenary of the name in 2024. In 1929 a Seikosha pocket watch became the first Japanese-made railway watch, the standard issue for train crews.

The clock tower of 1932

Work on the present building began on 11 June 1930, to a neo-Renaissance design from the office of Jin Watanabe, built by Shimizu Gumi. The tower clock was inaugurated on 10 June 1932, the date Japan keeps as Time Day, and the shop reopened two days later. The building came through the air raid on Ginza of 27 January 1945 with three cracked dial plates, and in 1966 a Seiko quartz master clock replaced the original German pendulum movement.

Two factories, one name

By the late 1930s the house had outgrown one factory, and it divided its work in a way that shaped every Seiko made for the next sixty years. The clocks stayed with Seikosha, and the watches went to a new sister company.

Daini Seikosha, Kameido, 1937

In 1937 the watch department of Seikosha in Kameido, in eastern Tokyo, became a separate company, Daini Seikosha. Daini means second, so the name reads simply as the second Seikosha. The Kameido plant was destroyed before the end of the Pacific War, and watchmaking went on at evacuation sites in Kiryu, Toyama and Sendai until it was rebuilt. Those sites closed in 1949, when production returned to Kameido. The company later became Seiko Instruments, and in April 2020 its watch business passed to Seiko Watch.

Daiwa Kogyo and the Suwa line

In May 1942 Hisao Yamazaki, a clock shop owner in Suwa, Nagano, and a former employee of K. Hattori, founded Daiwa Kogyo with money from the Hattori family. It began in a converted miso storehouse of about 230 square metres with 22 employees, making watch parts for Daini Seikosha. In 1943 Daini opened a Suwa factory alongside it, and after the war Yamazaki persuaded the family to keep the Nagano plant running. In 1959 that factory merged into Daiwa Kogyo to form Suwa Seikosha, the forerunner of Seiko Epson.

Rivals, and partners

In 1953 Genzo Hattori, the founder's son, gave the Kameido and Suwa plants separate management and separate research, so that each would push the other. Both were owned by the Hattori family, and both sold their watches through K. Hattori under the Seiko name. Each released new movements almost every year, which is why the 1960s Seiko catalogue is so crowded. The competition was real, but so was the sharing: Suwa's Diashock shock protection and its Magic Lever winding went to Daini at once, and Daini's mainsprings went into Suwa's trial movements.

The climb to Grand Seiko

In the early 1950s both plants were still building movements derived from Swiss designs, and Seiko watches struggled even in domestic tests. The decade that followed turned the house into a maker that could stand against Switzerland.

Marvel, 1956

Suwa finished the Marvel in 1956 with a movement designed from scratch. In the 1957 watch quality comparison run by the Ministry of International Trade and Industry, Marvels took the first five places and seven of the top ten. The Marvel line led to the Lord Marvel and the Crown, the watches Grand Seiko would later sit above.

Grand Seiko, December 1960

The first Grand Seiko appeared in December 1960 from Suwa, built on the hand-wound calibre 3180. The product manager Ren Tanaka chose the name because he saw it as the watch that would catch up with and overtake Switzerland. A separate Grand Seiko accuracy standard followed in 1966, and in 1967 the 62GS became the first automatic Grand Seiko. In 2014 the first Grand Seiko joined the Laurel on the national list of Mechanical Engineering Heritage.

King Seiko, 1961

Daini answered in 1961 with King Seiko, designed and made at Kameido. Ren Tanaka's first idea for the name was Champion Seiko, but since Grand Seiko stood at the peak, he settled on the King of Seiko for the second watch. A Grand Seiko of the period carries the Suwa logo above six o'clock and a King Seiko the Daini logo. The 1960s contest between the two is the subject of our study of the King Seiko and Grand Seiko rivalry.

The 44GS and the Grammar of Design

In 1967 Daini made the 44GS, whose faceted case, broad flat polished planes and dial furniture became the reference point for Grand Seiko design ever since. The rules behind that look, known as the Grammar of Design, are credited to the designer Taro Tanaka. The 61GS automatic and the 45GS hand-wound arrived in 1968, both beating at 36,000 vibrations an hour, ten beats a second. The later history of the line, and of Credor, is set out in our Grand Seiko and Credor guide.

The observatory trials

Suwa and Daini entered specially prepared movements in the Neuchâtel Observatory trials from 1964, and Suwa entered the Geneva trials in 1968. The first results were poor, largely because the movements were magnetised and disturbed on the flight from Japan, and the engineers spent years on anti-magnetic alloys and better flight cases. In 1967 Seiko took second and third places among mechanical watch makers at Neuchâtel, and in 1968 the top ranking for mechanical watches at Geneva. The 1968 Neuchâtel trial was suspended soon after testing began, in the year Seiko was expected to win.

The Five and the 1964 Games

Sportsmatic 5, 1963

In 1963 Seiko launched the Sportsmatic 5, the first Japanese automatic with both day and date. An improved version with better water resistance, luminous markers and a stronger crystal followed in 1968 as Seiko 5 Sports. The Five became the house's everyday automatic, and Fives and other plain automatics make up about a third of the vintage Seiko still circulating in Japan.

Official timer, Tokyo 1964

For the Tokyo Olympics of 1964 Seiko was official timer, producing 1,278 timepieces of 36 types and sending 172 employees to run them. The house went on to time five more Games: Sapporo, Barcelona, Lillehammer, Nagano and Salt Lake City. The Games showed the world that Seiko could build small quartz timers, and exports grew on the back of it.

A quartz clock you could carry

The Crystal Chronometer QC-951 of September 1963 was a portable, battery-powered quartz timer built for sports events. It kept to about two-tenths of a second a day, drew 0.003 watts and weighed 3.0 kilograms. Because quartz is sensitive to temperature, Suwa built its own temperature correction device for it, a step towards the Astron.

Divers, a chronograph and the Astron

The first Japanese diver, 1965

Seiko launched the first Japanese-made diver's watch in 1965. Ten years later the Professional Diver 600 became the first Japanese saturation diver's watch, built after a request for a watch that could work below 300 metres. Every generation is covered in our guide to vintage Seiko divers.

The 6139 Speedtimer, 1969

In 1969 Seiko put the 5 Sports Speedtimer on sale with calibre 6139, the first automatic chronograph to combine a column wheel with a vertical clutch. It reached mass production in its launch year, and its pairing of column wheel and vertical clutch is counted among the important mechanisms in the history of watchmaking. The watch and its astronaut story are told in our piece on the 6139 Pogue.

Christmas Day, 1969

On 25 December 1969 Seiko introduced the Quartz Astron 35SQ in Tokyo, the first quartz wristwatch sold to the public. A Suwa team led by Tsuneya Nakamura had worked on it for ten years. It used a quartz oscillator at 8,192 hertz, a hybrid integrated circuit and a stepping motor that moved the seconds hand once a second. It kept to within five seconds a month and came in an 18-carat gold case. In 2004 the Institute of Electrical and Electronics Engineers dedicated a milestone plaque to it, now at the Seiko Institute of Horology in Higashi-Mukojima, Sumida. The full story of the watch is in our Astron guide.

After the Astron

The Astron opened what Switzerland calls the quartz crisis and Japan the quartz revolution. Before the 1970s Swiss makers held about half the world watch market, and by the 1980s quartz had largely replaced the mechanical watch. Seiko spent the decade turning one costly gold watch into a family of affordable, accurate movements and into new names.

The six-digit display

In 1973 Seiko launched the first digital watch with a six-digit liquid crystal display, the 06LC, built on a display the house developed itself. It showed hours, minutes and seconds all the time, rather than lighting up only at the press of a button. The last new mechanical Grand Seiko of the first period appeared in 1972, and the remaining mechanical models ended in 1975.

Credor, 1974

Credor began in 1974 as Seiko Credor, a line of precious-metal watches, and it reached the catalogues under the French spelling Crêt d'Or, golden crest. The crest mark came in 1980, and in 2019 Credor was separated from the other lines as a brand with its own operations, two years after Grand Seiko. Its watches now come from small workshops: Spring Drive pieces from the Micro Artist Studio in Shiojiri and mechanical pieces from a workshop on the seventh floor of Seiko House Ginza.

Lassale, and the thin watch

Jean Lassale, a Geneva brand founded by 1974, showed the thinnest movements then made at the Basel Fair of 1976. From 1977 it built high-end cases for Seiko, which fitted its own quartz movements, and in 1979 Seiko bought the company. In 1981 Seiko launched the quartz Seiko Lassale line of very thin dress watches.

Pulsar and the brand stable

In 1978 Seiko bought Pulsar, the American name behind the first LED watch, and used it for its middle range. In 1979 it added Alba, an entry-level line for young buyers. In January 2023 Pulsar was folded into Alba, and Pulsar watches are no longer made.

Kinetic and Spring Drive

From the 1980s the house tried to join the two ideas it had set against each other: the moving wrist of the automatic and the accuracy of quartz. It found two different answers, years apart.

AGS and Kinetic

Work on a quartz watch that made its own power began in 1983, and the AGS, for automatic generating system, went on sale in Germany in January 1988. A swinging weight drove a tiny generator that charged the watch, which kept to about 15 seconds a month and ran 75 hours on a full charge. It reached Japan in April 1988 as the Seiko Auto-Quartz, and the system was renamed Kinetic in 1997.

Spring Drive

Spring Drive keeps the mainspring and gear train of a mechanical watch but replaces the escapement with a quartz-regulated glide wheel, so the seconds hand sweeps without ticking. The engineer Yoshikazu Akahane at Suwa Seikosha conceived it late in the 1970s, after working on twin-quartz movements accurate to five seconds a year. Work started in 1982 and failed, a second attempt in 1993 failed too, and only a third attempt in 1997, with a circuit drawing about a hundredth of the first one's power, made the watch possible. More than 600 prototypes were built before the first Spring Drive watches went on sale in 1999. The first unlimited model followed in 2002, and the movements are made by Epson in Shiojiri.

The group today

The parent company has changed its name four times since 1917, and the names map the house's history. The table below shows the line from the Ginza shop to the present group.

Three companies, one heritage

The descendants of the old factories now sit in three places. Seiko Watch Corporation plans and sells the watches; Seiko Epson, the heir of Suwa, makes quartz and Spring Drive movements; and the Daini line survives in Morioka Seiko Instruments at Shizukuishi in Iwate, which Daini founded in 1970. The clock business of the old Seikosha passed to Seiko Clock in 1996 and, from 2021, to Seiko Time Creation.

Grand Seiko on its own

Grand Seiko has been sold outside Japan since 2010, and in 2017 the house made it a separate brand, removing the Seiko name from new Grand Seiko dials. The ownership did not change; only the name on the dial did. King Seiko returned to the catalogue as well, and is now one of the global brands of the group.

Calibres and references to know

A Seiko is identified by its calibre first and its model name second, so a short list of landmark calibres covers most of what a collector meets.

Telling the factory from the watch

Until the mid-1960s, each factory had its own families of watches, and the dial logo told the buyer which plant had made them. From then on the brands were shared, so both Suwa and Daini made Grand Seikos and King Seikos, each around its own movements, and the calibre number is the surer guide. The 6139 was completed at Suwa, yet a number of examples carry Daini components, made to meet production targets across the company.

The Japan thread

Seiko's history can be walked as well as read, because the places that made it are still on the map. Four of them explain most of what a collector holds.

Ginza 4-chome

The clock tower on the Ginza crossing has marked the house's corner since 1894, and the present tower since 1932. The building was renamed Seiko House in 2022, and the Seiko Museum moved to Ginza in 2020 as the Seiko Museum Ginza, with a Grand Seiko museum added there in 2024. The museum began in 1981 as the Seiko Institute of Horology in Higashi-Mukojima, Sumida, where the Astron plaque was first put up.

Kameido and eastern Tokyo

Kameido, in the old downtown of eastern Tokyo, was home to Daini Seikosha and the birthplace of King Seiko. The Kameido plant built the 44GS of 1967, so the design language of Grand Seiko began in Tokyo rather than in the mountains.

Suwa and Shiojiri, Nagano

Suwa, a lake town in Nagano, grew from a miso storehouse of 22 workers in 1942 into the plant that made the first Grand Seiko, the 6139 and the Astron. Epson still has its head office in Suwa, and its plant in nearby Shiojiri makes the quartz and Spring Drive movements.

Shizukuishi, Iwate

Daini founded Morioka Seiko Instruments at Shizukuishi in Iwate in 1970, and it began work in 1971. The Shizukuishi Watch Studio opened there in 2004, and the Grand Seiko Studio Shizukuishi in 2020. Every mechanical Grand Seiko is now made there, some 500 kilometres from Shiojiri. Why watches from these towns often reach collectors in good order is explained in our essay on how Japan keeps its watches.

Hattori on film

This film, in English, tells the life of Kintaro Hattori, from the apprentice in Ginza to the founder of the house. It was made by the group itself and runs as its long version of the founder's story.

Hattori opened his repair shop in 1877 and died on 1 March 1934, and the film covers the years between.

How to read a Seiko caseback

A vintage Seiko carries two numbers on its caseback that date and identify it. The first is the reference, written as movement calibre and case code, such as 6119-8083. The second is a serial of six or seven characters.

Finding the decade

A serial of 456789 means May of a year ending in 4, so it could be 1974, 1984, 1994 or 2004. The decade comes from the calibre: a movement made only in the 1970s fixes the watch to the 1970s. The result is a likely production date, not proof that the watch is original.

Model names and reference numbers

Most Seikos also had a shop model number that is not written anywhere on the watch, so the caseback reference is the one to quote. On a 1960s Grand Seiko or King Seiko, the small logo above six o'clock names the factory. Both are worth checking against the calibre before you buy.

Condition and care

Vintage Seiko spans a wide range of condition, and about a quarter of the pieces we surveyed in Japan were described as not running or for parts. That is why a grade matters as much as a model name.

Reading a grade

Japanese shops grade pre-owned watches on a letter scale, explained in our guide to Japanese condition ranks. Our own scale is set out in the Japonista grading guide, and every grade we give is checked by hand.

Box, papers and the extras

A Grand Seiko or Credor with its box and guarantee card is easier to place and date than the bare watch. What the extras add is weighed in our guide to full sets, boxes and papers.

Mechanical, quartz and Kinetic

A mechanical Seiko needs a regular service, and the high-beat Grand Seikos of 1968 onwards, at ten beats a second, deserve a watchmaker who knows them. An early quartz runs on a battery: the Astron's was rated for a year or more. A Kinetic stores the power of the moving wrist and runs 75 hours or more on a charge, so one left in a drawer will stop.

Where the records disagree

A house with two factories and a century of anniversaries leaves records that do not always agree. These are the points where careful accounts part company, and how we read them.

How Japanese was the Laurel?

The Laurel is Japan's first wristwatch, but its movement is thought to have been based on a Swiss design. Seikosha's achievement lay in shrinking that structure to 12 ligne with Japanese tools, not in inventing the movement. The same pattern held into the 1950s, when both plants still built movements derived from a Swiss calibre before the Marvel.

1959 or 1953?

The usual story says Seiko split its factories in 1959 to make them compete. The company records date Suwa Seikosha to 1959, but the separate management that drove the competition began in 1953 under Genzo Hattori. We use 1953 for the start of the rivalry and 1959 for the company name.

Rivals or brothers?

Some accounts describe the Suwa and Daini plants as fighting for survival. Others show the plants sharing parts, staff and inventions, down to Daini mainsprings in Suwa's trial movements. The record supports both: the plants competed hard on new models and co-operated on the technology underneath.

When did Credor begin?

The house dates Credor to 1974. Yet no Credor appears in the two 1974 catalogues, and the first printed reference is in 1975, under the spelling Crêt d'Or. A late-1974 launch fits both.

When was Spring Drive born?

One account dates the idea to 1977 and the patent filings to 1982. Another places Akahane's idea late in the 1970s and the start of development in 1982, some twenty years before commercial sale. All agree on the 1999 launch.

A sceptic's reading

Seiko's history is told by a company proud of its firsts, and the qualifiers matter. The 6139 is described as the first automatic chronograph with both a column wheel and a vertical clutch, which is narrower than first automatic chronograph. The Astron was the first quartz wristwatch on sale, but quartz timekeeping itself dates from the clocks of the 1920s. The Grand Seiko name was a product manager's idea of overtaking Switzerland before any trial had been won.

Seiko among the Japanese houses

Seiko was never the only Japanese house to build serious watches. Its oldest rival is set out in our guide to vintage Citizen watches. Orient, now owned by Epson and made in Akita, is covered in our Orient and Orient Star guide. The quartz age that Seiko started also produced Casio's digital tool watch, followed in our G-Shock guide.

What the house holds

Our shelf holds a Seiko Lord Marvel, reference J14039, in an 18-carat gold case with a silver dial and hand winding: see the Lord Marvel. Beside it is a Grand Seiko 62GS day-date of 1967, reference 6246-9001, the first automatic Grand Seiko line, in steel with an aged silver dial: see the 62GS. From Daini there is a King Seiko 5626-7010 hi-beat of 1969 with a grey dial in a cushion case: see the King Seiko. And from the Credor line there is an automatic, reference GBBG998, in 18-carat yellow gold with a Roman numeral dial: see the Credor. The wider field of watches we hold is on our collectible watches shelf. Every piece is covered by our authenticity guarantee.

Questions

Who founded Seiko?

Kintaro Hattori, who opened a repair shop in Ginza in 1877 and founded K. Hattori in 1881.

What does Seiko mean?

It means exquisite in Japanese and sounds like the word for success; it was first used on a watch dial in 1924.

What was the first Japanese wristwatch?

The Laurel, made by Seikosha in 1913 with a 12-ligne movement.

What is the difference between Suwa and Daini Seiko?

They were two sister factories: Daini in Kameido, Tokyo, from 1937, and Suwa in Nagano, from 1959 as Suwa Seikosha. Grand Seiko began at Suwa, King Seiko at Daini.

How do I date a vintage Seiko?

The first digit of the caseback serial is the last digit of the year and the second is the month; the calibre fixes the decade.

When was the Astron launched?

On 25 December 1969 in Tokyo, as the first quartz wristwatch sold to the public.

Who owns Grand Seiko today?

The same group that owns Seiko: Grand Seiko became a separate brand in 2017, with no change of ownership.

The last step

A repair shop opened in Ginza in 1877 grew into a clock factory in 1892 and a wristwatch maker in 1913. Two sister plants, in Kameido and Suwa, then built the Grand Seiko, the King Seiko, the 6139 and the Astron within a single decade. Every Seiko we hold is on our Seiko shelf. If the reference you want is not there, our otoriyose service can look for it in Japan.

Further reading

References

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.