Makers and Brands: A Reference

Toys Almanac · Houses and Marks

Makers and Brands: A Reference

Japanese toys are remembered by their makers more than by their names, and the makers are remembered by two letters on a box. This reference sets out what the sources read for the almanac say about each house, and says where they say nothing.

Fact sheet

Tin housesMasudaya, Horikawa, Nomura, Yonezawa, Alps, Bandai, Marusan, Tomy
Vinyl housesMarusan, Bullmark, Medicom Toy
Alloy and kitsPopy and Bandai
Marks namedM-T, SH, TN, and others listed by the Journal of Antiques
Importers namedCragstan, Marx, Franconia, Illfelder
Last reviewed28 October 2026

At a glance

  1. Mostly Tokyo. The tin firms the sources place on a map stand in Tokyo, not in Yokohama, which is where the museum is.
  2. Two letters, one maker. SH points to Horikawa, TN to Nomura and M-T to Masudaya, according to the Collectors Weekly and Wikipedia accounts.
  3. Names that moved. Marusan was renamed Maruzan in 1967 and went bankrupt in 1968, and its staff founded Bullmark in 1969.
  4. A survivor. Wikipedia calls Metal House the only traditional Japanese maker of battery tin robots still in business.
  5. Importers matter. An importer's name on a box tells you the market the toy was made for, not necessarily the factory.
Tin

The Printed-Steel Houses

Masudaya, whose trademark is M-T for Modern Toys, is the house behind the Gang of Five robots. Wikipedia says it became known as a leading builder of mechanical and battery-operated toys in the postwar era, that its robots and space toys have been sold by leading saleroom houses, and that it was involved in the early airsoft boom of the 1980s. Wikipedia also records that its milk-drinking doll of 1953 is believed to be the first soft vinyl doll made in Japan.

When the houses were founded, as the sources give it1924Tomy, as TomiyamaToy Seisakusho1943Marumiya, laterMetal House1947Marusan founded1948Alps founded inTokyo1950Bandai and Yonezawafounded1969Bullmark founded1996Medicom Toy foundedTakara Tomy history, Wikipedia (Metal House Robots, Marusan, Bandai, Bullmark, Soft vinyl toys), Carters. Spacing is even, not to scale. Diagram by Japonista.
When the houses were founded
Diagram by Japonista. Dates from Takara Tomy, Wikipedia and Carters; spacing is even, not to scale.
Look closer: Most of the great tin houses were founded within five years of one another, in the first years of the Occupation and just after it. The vinyl houses came later.
Diagram by Japonista
A tin robot in profile with a pale blue body, a red round control on its chest, a flat rectangular head with a red button and a red clawed arm, standing on thin blue legs.
QSH Giant Easelback Robot
A QSH tin wind-up mechanical robot, the Giant Easelback, seen from the side. Photograph by D J Shin, CC BY-SA 3.0. Wikimedia Commons, File:QSH Tin Wind Up Mechanical Robot (Giant Easelback Robot) Side.jpg.
Look closer: Makers can be known by initials. QSH is the mark in the title of this file, and the sources read for this chapter do not expand it.
Image: D J Shin, CC BY-SA 3.0, via Wikimedia Commons
A slender red tin robot seen from the side, with a square yellow-windowed head, a ribbed tapering body and a printed panel at the base.
Masudaya Mini Machine Man
A Masudaya tin wind-up Mini Machine Man robot. Photograph by D J Shin, CC BY-SA 3.0. Wikimedia Commons, File:Masudaya – Tin Wind Up – Mini Machine Man Robot (ミニ マシンマン ロボット) – Last member of the Gang of Five – Side.jpg.
Look closer: Masudaya, marked M-T, made the Gang of Five and its smaller descendants.
Image: D J Shin, CC BY-SA 3.0, via Wikimedia Commons
Four shiny tin robots in a row, in blue, black, chrome and blue again, each with a domed head and ringed legs, standing on red feet against a pale background.
Ha Ha Toy Planet Robots
Ha Ha Toy tin wind-up Planet Robots in different colours, photographed together. Photograph by D J Shin, CC BY-SA 3.0. Wikimedia Commons, File:Ha Ha Toy – Tin Wind Up – Planet Robot – More and More!.jpg.
Look closer: A colour variant is a normal part of a robot's life; a description should name the colour.
Image: D J Shin, CC BY-SA 3.0, via Wikimedia Commons

Horikawa, marked SH, made the Smoking Spaceman, Machine Robot, Fighting Robot and Attacking Martian, and Wikipedia calls Star Strider its last all-tin robot design. Horikawa, the main client of the subcontractor Marumiya, closed in the late 1980s, after which Metal House was established in 1989. Marumiya, founded in 1943, also worked for Nomura and Yonezawa. Nomura, marked TN, opened in the late 1940s, during the occupation, according to the Star Blazers history, and its Yamato toys of 1978 and 1979 in diecast metal were its most popular.

Yonezawa was founded in 1950 by Yasuhei Yonezawa in Tokyo, according to the Carters guide, and made science-fiction robots, large friction cars and aeroplanes, moving to plastics in the 1960s and 1970s. Alps Shoji was founded in Tokyo in 1948, de Lespinay's account has it, and made well-marked battery toys, including 15-inch Packards. Asahi, marked ATC, and Ichiko are named by de Lespinay among the leading makers of tin cars, and CK, Kuramochi, made large clockwork American-car models before the war.

A green tin robot with a square head, two large red and yellow eyes, a red lamp on top, two aerials, a chest with two printed instrument panels and grey feet, seen from the front against a pale background.
Star Strider, Horikawa
The S.H Horikawa Star Strider Robot, front view. Photograph by D J Shin, CC BY-SA 3.0. Wikimedia Commons, File:S.H Horikawa – Star Strider Robot (スターストライダーロボット) – Front.jpg.
Look closer: Wikipedia says Star Strider was Horikawa's last all-tin robot design, carried on by Metal House.
Image: D J Shin, CC BY-SA 3.0, via Wikimedia Commons

Bandai was founded on 5 July 1950 by Naoharu Yamashina as Bandai-ya and made cars from 1956, and Tomy's founder Eiichiro Tomiyama established Tomiyama Toy Seisakusho on 2 February 1924 with capital of 1,000 yen, after training at Kawano Toy Seisakusho in Asakusa. The Takara Tomy history is the source for that second record. Taken together these are the facts that can be placed with a source, and nothing in the table below has been added from memory.

House Mark or name Facts read in the sources Chapter
Masudaya M-T (Modern Toys) Gang of Five robots; leading postwar mechanical and battery toys; milk-drinking doll 1953 Tin Robots
Horikawa SH Smoking Spaceman, Machine Robot, Attacking Martian; Star Strider its last all-tin design; closed late 1980s Tin Robots
Nomura TN Opened late 1940s; 1960s robots; diecast Yamato 1978 and 1979 Tin Robots
Yonezawa Yonezawa Founded 1950 by Yasuhei Yonezawa, Tokyo; robots, friction cars; plastics in 1960s and 1970s Tin Robots
Alps Shoji Alps Founded in Tokyo in 1948; battery toys; 15-inch Packards Tin Plate
Marumiya / Metal House Metal House Subcontractor from 1943; Metal House from 1989; still makes battery tin robots Tin Robots
Bandai Bandai Founded 5 July 1950; cars from 1956; later chogokin and Gunpla Tin Plate; Mecha and Gunpla
Tomy Tomy Founded 2 February 1924 as Tomiyama Toy Seisakusho Tin Plate
CK (Kuramochi) CK Prewar clockwork models of American cars by 1939 Tin Plate
Vinyl

From Marusan to the Artists

Marusan Shoten was founded in 1947 by relatives Haruyasu and Minoru Ishida and Yasuo Arai, was incorporated in 1950, released its tin 1951 Cadillac in 1953 and a first plastic model kit, based on the USS Nautilus, in 1958. Wikipedia lists a walking Godzilla toy in 1964 and Ultra-kaiju PVC figures in 1966, a renaming to Maruzan in 1967 and a bankruptcy in 1968. In 1969 Minoru Ishida rebuilt the company as Marusan Co., while former staff founded Bullmark and Fuji Hobby. The firm reproduced its original PVC monster series in 1997 and still produces old-style toys under its own brand.

Bullmark, per Wikipedia, was founded in 1969 after Marusan's bankruptcy and was known for PVC kaiju toys, with Godzilla and Ultraman figures in mini, standard and giant sizes, and with small runs in brighter colours for Hawaii and the American West Coast. It added a diecast line, Zinclon, in 1973, with a Mechagodzilla among its best-selling designs, closed in 1977, and was revived in 2009 by Saburo Ishizuki as an independent company. In the 1990s it helped M-1 and Bandai reissue classic vinyl toys.

A newer generation is represented by Medicom Toy, which Wikipedia's article on soft vinyl toys says was founded in 1996 and mainly produces such toys, often supporting independent artists. In 2014 it launched the Vinyl Artist Gacha series, smaller versions of artists' designs sold through gashapon and blind boxes. The same article names Bounty Hunter of Ura-Harajuku as a leader of designer vinyl in the 1990s.

Alloy

Popy, Mattel and the Kit Makers

Popy was the Bandai subsidiary that adopted the chogokin name in 1972, according to Wikipedia, and Bandai continues the line under its own name. Mattel sold selected chogokin toys in the United States in the late 1970s as Shogun Warriors, and Bandai America's Godaikin line of the early 1980s aimed at an older audience, with prices that contributed to its downfall. Bandai's Soul of Chogokin line updates the classic designs, and its first release was a new Mazinger Z.

Bandai is also the maker of Gunpla. The company obtained the rights to make Gundam models in 1980, and Wikipedia reports cumulative shipments of over 800 million kits by September 2024. The Gunpla Builders World Cup is Bandai's annual international contest, held in at least sixteen countries. These are the figures that belong to the maker rather than to a single toy, and the chapter on mecha and Gunpla treats them in detail.

Craft

Doll and Folk Houses

For dolls and folk toys the sources name people and places more often than firms. Collectors Weekly names the kokeshi artisans Ikuo Nakakawa, Kochi Sato, Ikuo Okazaki, Akihiro Sakurai and Fumio Kakizaki, and nippon.com says Hiraga Kokeshi Shop is the only remaining maker of the Sakunami style. The Sendai Kokeshi Association, founded in 1923, shaped the collecting of kokeshi, and kokeshi makers have signed their work since the 1950s.

For daruma, Visit Gunma names Daimonya as the largest maker, and Shorinzan Daruma Temple in Takasaki is the home of the traditional charm. Web Japan says about 100 households make roughly 1.6 million dolls a year. For Hakata dolls, Web Japan counts 89 companies and 635 workers, and Wikipedia names Souichi Masaki, spelled Soshichi in Web Japan, as an early artisan. For kimekomi, kougeihin.jp says the craft was designated as a traditional craft on 6 February 1978 and is made in Saitama, Kasukabe and several wards of Tokyo.

Trade

Importers, Brands and Marks

A tin toy often wears the name of the company that sold it, not the company that made it. Pinchot names Cragstan, which sold only Japanese-made goods, and Marx, which commissioned Japanese factories to build American designs such as the Smoking Spaceman of 1962. The Journal of Antiques names the importers Franconia and the Illfelder Toy Company, and lists maker marks that recur on boxes and toys: EC, MM, M-T, MS, HTC, TM and TN. It warns that identification is hard because many toys are unmarked, carry only a distributor's mark, or bear a mark that conflicts with the box.

The practical rule is to record every name on the object and to say what each name is. A maker's mark, an importer's name, a licence holder's name and a brand name are four different things. The house's Directory of Showa Tin Toy Makers carries the marks as they appear on the toys, and this chapter is the companion that tells the story of the firms.

Giant

Naoharu Yamashina and the Name That Means Forever

Bandai is the firm with the longest paper trail in this almanac, and the Wikipedia article on it gives a coherent account. It was founded by Naoharu Yamashina, a veteran of the Second World War who lost the sight of his right eye to grenade shrapnel. He was the eldest son of a rice retailer and had studied business at school. After the war he worked for a textile wholesaler in Kanazawa that his wife's brother ran, which was struggling in the postwar economy, and a neighbour suggested the toy trade as a profitable opening. He travelled to Tokyo with his wife to study the market, and the two built a small toy distribution division inside the textile business.

On 5 July 1950, the article says, Yamashina took full control of that division when it was spun off as a separate company called Bandai-ya, in Taito in Tokyo. The name, according to the article, derives from a Japanese reading of a Chinese phrase meaning eternally unchanging, which comes from a classical military text. The firm began as an importer and distributor of celluloid dolls, metallic toys and rubber swimming rings, and released its first original product in 1950, the Rhythm Ball, a beach ball with a bell inside. The article says the ball had many quality defects, but that the company improved its designs and soon made inexpensive metal cars and aircraft models, several of which were exported to the United States and elsewhere as among the earliest Made in Japan toys sold abroad.

A glass shopfront with four tall windows showing Gunpla displays, large model robots and posters, with the word GUNPLA near the door.
A Gunpla shop in Dusseldorf
A Gunpla pop-up store in Dusseldorf, March 2026, by Kürschner; CC0. Photograph by Kürschner (talk) 16:40, 11 March 2026 (UTC), CC0. Wikimedia Commons, File:Gunpla, Königstraße 10, Düsseldorf, März 2026.jpg.
Look closer: Bandai's Gunpla, launched in July 1980, is now sold in pop-up stores outside Japan.
Image: Kürschner (talk) 16:40, 11 March 2026 (UTC), CC0, via Wikimedia Commons

The firm built its reputation on inspection. A shipping and warehouse facility opened in 1953, followed by research and development and product inspection departments, and the Waraku Works factory opened in 1955. In that year, the article says, the firm introduced what it calls the toy industry's first quality assurance system, and the first toy approved under it was a 1956 Toyopet Crown model car, which was also Bandai-ya's first product with a guarantee. For a collector, the dates are a small lesson. A tin car of the late 1950s from this house may carry a guarantee that an earlier one does not.

The renaming came in July 1961, when Bandai-ya became Bandai, at the time that it began expanding overseas, starting with Bandai Overseas Supply in New York. Its breakthrough, the article says, came in 1963 with action figures based on Astro Boy, after which it began funding television series and sponsoring them, using the advertisements to promote tie-in figures and costumes. Ultraman figures later also sold strongly in Japan. In July 1966 it released Crazy Foam, which sold 2.4 million units in three months, and its Naughty Flipper won a gold medal at the 1968 New York International Innovative Productions Exhibition.

Growth

From Candy Shops to Kits

The article records the steps by which Bandai became a multinational. In 1970 it formed a joint venture with the model car maker Tonka and established Tonka Japan. In 1971 it formed the subsidiary Popy, which made toys of popular children's characters and was initially aimed at candy shops and other retailers outside the toy trade, and Bandai Models was also established that year. Its 1:48 scale armoured fighting vehicle kits, the article says, dominated that segment of the model kit market, although they were not its most profitable line. Bandai America was founded in 1978 as a local sales and marketing operation, because, the article says, executives felt the company needed a greater international presence in competition with Takara and Epoch.

In May 1980 Makoto Yamashina, the founder's son, became president, and Naoharu Yamashina became chairman. Makoto replaced many older staff with younger employees and sold directly to retailers instead of through intermediaries. In July 1980 Bandai launched the Gundam plastic model and created the Gunpla range, and in November it created a subsidiary named Celent. The Gunpla chapter of this almanac follows that line, and the chapter on mecha gives the Popy chogokin that preceded it.

The 1980s and 1990s brought games. Bandai became one of the first third-party developers for the Nintendo Family Computer in 1985, and its Kinnikuman title sold over a million copies. It acquired the arcade developer Coreland in February 1989 and reorganised it as Banpresto, and it launched the Playdia console in 1993 and, with Apple, the Pippin in March 1996. Both consoles were unsuccessful, and Bandai discontinued its hardware. In January 1997 it announced a planned merger with Sega that would have been a stock swap of about a billion dollars, and abandoned it in May after internal opposition and the success of the Tamagotchi; its president took responsibility and resigned.

A long curved wall of lit glass shelves filled with small model robots and figures in a white shop interior.
A wall of finished kits
Display cases of kits at Odaiba, Tokyo, August 2014; photographed by Piotrus; CC BY-SA 3.0. Photograph by User:Piotrus, CC BY-SA 3.0. Wikimedia Commons, File:Odaiba Tokyo August 2014 Gundam 014.JPG.
Look closer: The kits are the part of Bandai's output that carries its name longest.
Image: User:Piotrus, CC BY-SA 3.0, via Wikimedia Commons
A white life-sized Unicorn Gundam statue stands with its arm out in front of a glass tower under a grey sky.
The Unicorn Gundam
The life-sized Unicorn Gundam in Japan; CC0, photographed by Pelpinosas R. Justin James. Photograph by Pelpinosas R. Justin James, CC0. Wikimedia Commons, File:Life-Sized Unicorn Gundam Statue.jpg.
Look closer: Wikipedia says the Unicorn replaced the 18-metre RX-78-2 in front of Gundam Front Tokyo in 2017.
Image: Pelpinosas R. Justin James, CC0, via Wikimedia Commons

The article records the later structure. In March 2003 Bandai merged its subsidiary Yutaka with its garage kit division B-Club to form a new Popy, reviving a brand that had been folded in the 1980s, and in 2007 Popy was folded into the subsidiary Plex while keeping its brand name. In September 2005 Bandai merged with Namco to form Bandai Namco Holdings, and Bandai Spirits was established on 15 February 2018. On 1 April 2018 Bandai's adult-focused division, with figures and plastic models, and Banpresto's prize business were transferred to it. For a collector, these dates explain why a kit or figure may be marked Bandai in one decade and Bandai Spirits in another, and why a Popy mark in the 2000s is a reissue and not a 1970s product.

Rival

Eiichiro Tomiyama and the Friction Bomber

Tomy is the other great name, and the Wikipedia article on the company gives its early history briefly. It was established in 1924 by Eiichiro Tomiyama as the Tomiyama Toy Manufacturing Company, and its name abbreviates the founder's surname. The Takara Tomy company history, cited in the tin chapter, adds that it was set up on 2 February 1924 with capital of 1,000 yen after the founder trained at Kawano Toy Seisakusho. Early on, the article says, it became known for the B-29 friction toy and for Pop-up Pirate, a game of luck.

As a manufacturer, the article says, Tomy built what it describes as the largest product development team in the toy industry and earned a reputation for technical skill. By the third generation, however, the president Mikitaro Tomiyama chose to streamline operations to compete better with the wholesaler Bandai. Bandai could develop products faster, which made it more attractive to television productions that needed quick turnarounds. Tomiyama pursued television licences aggressively, the article says, naming Akakage, Giant Robo and Osomatsu-kun as examples.

The article also gives Tomy's greatest commercial success. Tomy noticed the growing popularity of Pokemon through the monthly CoroCoro Comic and secured the commercial rights, at a time when Bandai was focused on Tamagotchi and not interested. When the anime became a hit, related product sales doubled, and the licence significantly raised Tomy's share of the Japanese domestic market in 1997. This was the peak of the company's growth, and Tomy ranked among Japan's top two traditional toy makers alongside Bandai.

The two houses are the poles of the postwar toy world. One began as a manufacturer with a reputation for engineering, and the other as a wholesaler with a talent for speed and television. The difference explains something about the objects. A Tomy toy of the 1930s or 1950s is a made thing, and a Bandai toy of the 1960s is a licensed one, and a description that names the house gives the reader a first guess about which kind of object is in front of him.

Merger

Takara, Tomy and a Name Kept for Export

In 2001, the Takara Tomy article says, Takara's hit franchise Beyblade, combined with a slump in Pokemon sales, pushed Takara into second place and dropped Tomy to third. Beyblade later declined, which hurt Takara, and Tomy merged with the weakened company. The merger took effect in March 2006, and the combined firm became Takara Tomy.

The companies agreed to use the name Tomy for international subsidiaries and Takara Tomy in Japan, for two reasons the article gives: Tomy had stronger international brand recognition, and Takara's well-known products, such as Microman, Transformers, Battle Beasts, Beyblade and B-Daman, had been sold and branded abroad by other companies, notably Hasbro. Rebranding was also judged too expensive. The article adds that Western media often described the merger as a takeover of Takara by Tomy, although Takara had higher sales and Japanese corporate law classed the deal as an equal merger, and that all packaging carried a Tomy copyright, including former Takara brands distributed by Hasbro, which led to speculation about brand ownership.

The article lists the properties of each. Tomy-origin lines include Tomica, Plarail, Zoids and Idaten Jump. Takara-origin lines include Space Pets, Choro-Q, which is also called Penny Racers, Transformers, Beyblade, B-Daman and Microman. Licensed properties include Thomas and Friends, Astro Boy, Pokemon and Disney, and the notable products list names Licca, the Omnibot line of toy robots, the Tomytronic handheld games and Z-Knights, constructible humanoid robot models from 1991 to 1993. The article gives no founding date for Takara and says nothing of how Transformers or Microman were first created, so this chapter does not either.

For the collector, the practical result is a rule about names. A Takara Tomy piece may carry the name Takara, Tomy or Takara Tomy depending on its year and market, and the article says that in Japan Takara and Tomy remain separate brand names for lines that came from each original company, while most new ranges carry the combined brand. The date on a toy therefore tells the reader which name to expect.

Lineage

The Ishida Family Tree

The toy world in this almanac is crowded with names that are really the same people at different dates. The clearest example is Marusan, and the Wikipedia articles on Marusan and Bullmark allow its tree to be set out. Marusan was founded in 1947 by the brothers Haruyasu and Minoru Ishida and their brother-in-law Yasuo Arai, became Maruzan in 1967 and went bankrupt in 1968. Minoru Ishida rebuilt it as Marusan Co. in 1969. In the same year Koutaro Ishida, a nephew of Minoru, with the former employees Saburo Ishizuki and Yutaka Shibata, founded Bullmark. Fuji Hobby, founded by other former staff, took over military plastic kit production, and the moulds were bought by Bullmark, Fuji Hobby, Nichimo and Doyusha.

The tree does not end in the 1970s. Bullmark closed in 1977 and Ishizuki developed its subsidiary Ark into a toy maker, helped in the 1990s with licensed reissues by M-1 and Bandai, and revived Bullmark in 2009 with manufacturing support from Yuji Nishimura of M-1. Marusan reproduced its PVC monsters in 1997 and still makes old-style toys under its own brand. The Japanese Toy Wiki adds that Shimada Toy made the soft vinyl for Bullmark and that Orange was its design and manufacturing company. For a description, the practical consequence is that a Marusan logo on a figure's foot can belong to the 1960s, the 1980s or later, and the soft vinyl chapter sets out the marks that tell them apart.

The glass shopfront of a Mandarake store with a yellow sign, shelves of boxed figures and a tall robot standing at the door, in a covered arcade.
A Mandarake store in Nakano
One of the Mandarake stores in Nakano Sun Mall; photographed by fletcherjcm; CC BY-SA 2.0. Photograph by fletcherjcm, CC BY-SA 2.0. Wikimedia Commons, File:Mandarake (4970180671).jpg.
Look closer: Reissues and originals of the houses named here are sold side by side in such shops, which is why the marks matter.
Image: fletcherjcm, CC BY-SA 2.0, via Wikimedia Commons

The same practice, of the family firm that reorganises, appears across the tin toy world. Metal House began as Marumiya in 1943 and was established under that name in 1989 when Horikawa, its main client, closed, and the chapter on tin robots gives its line. These are not scandals. They are the ordinary history of small Japanese firms under pressure, and a collector who knows them can read a change of name as a date and not as a mystery.

Art

Medicom and the Designer Houses

The most recent house in the almanac's records is Medicom Toy. The Wikipedia article on soft vinyl toys says it was founded in 1996 and mainly produces such toys, often supporting independent artists, and that in 2014 it launched the Vinyl Artist Gacha series, smaller mass-produced versions of artists' designs sold through capsule machines and blind boxes. The article describes the culture as highly collaborative, with independent artists often receiving help with production and distribution from larger companies, and says that some production companies are family businesses.

The point for a reader of marks is that the designer houses work in a different way from the Showa firms. A Showa monster was made by a company for a licence, and a designer figure is made by an artist with a company's help. The label on the box says which, and the description should carry both names. The soft vinyl chapter adds the artists, events and resale concerns of that culture.

Workshops

Smaller Houses on the Same Timeline

The table in the next section sets the large houses beside smaller ones, and the pairing is deliberate. Alps Shoji, founded in Tokyo in 1948, Yonezawa, founded there in 1950, and Marumiya, which began in 1943 as a subcontractor and became Metal House, appear on the same line of years as Bandai-ya and Marusan. The earlier chapters of this almanac, on tin plate and tin robots, give what the sources say about each. The point here is only that none of these firms worked alone, and that a toy from one of them sits inside a web of customers, subcontractors and licences.

A reader who holds the chronology in mind can ask better questions of an object. A tin robot with a Horikawa name and a Metal House stamp invites the question of what happened in 1989. A vinyl monster marked Marusan invites the question of whether the mark is from before the bankruptcy of 1968, from the rebuilt firm of 1969, or from a later reissue. A Popy mark invites the question of whether the object is from the 1970s or from the revived brand of 2003. Each question has an answer in the sources, and none of them is answered by the look of the object alone.

There is also a caution. The sources cited in this chapter are encyclopaedia articles and a collector-run reference, and where they differ in detail, the chapter prints what each says and does not choose between them. A collector who needs certainty about one firm should consult the company archives, the museum collections named in the sources of the tin and robot chapters, and the printed catalogues that dealers cite. The chronology is a map of where to look, and it does not replace the looking.

Practice

Five Questions for Any Maker

The histories above can be turned into five questions. What name is on the toy, and what kind of name is it: maker, importer, licence holder or brand? In what year was that firm in that form: Bandai-ya or Bandai, Marusan or Maruzan, Tomy or Takara Tomy, Bullmark or its revival? What did the firm make at that date: tin, vinyl, die-cast, kits? Who else made the same design, as a subcontractor, a reissuer or a licensee? And what evidence on the object, such as a mark, a sticker or a box, says which of the answers applies?

The questions do not replace the sources. They tell a reader where to look. A foot stamp from a firm that did not yet exist cannot be original. A box naming a licence that had not yet been granted cannot be earlier than the grant. A toy marked with a name that the firm used only for export must have been exported. In each case the chronology of the firm, read with the chronology of the object, narrows the field.

Year Event, as the sources give it House
1924 Eiichiro Tomiyama founds Tomiyama Toy Manufacturing, later Tomy Tomy
1943 Marumiya begins as a subcontractor, later Metal House Marumiya
1947 Marusan founded by Haruyasu and Minoru Ishida and Yasuo Arai Marusan
1948 Alps Shoji founded in Tokyo Alps
5 July 1950 Naoharu Yamashina takes full control of the toy division as Bandai-ya Bandai
1950 Yasuhei Yonezawa founds Yonezawa in Tokyo Yonezawa
1955 Bandai-ya introduces what the article calls the toy industry's first quality assurance system Bandai
July 1961 Bandai-ya renamed Bandai; overseas expansion begins Bandai
1963 Bandai's Astro Boy action figures; television sponsorship begins Bandai
1966 Marusan's Ultra-kaiju figures Marusan
1967 to 1968 Marusan renamed Maruzan; bankrupt in 1968 Marusan
1969 Marusan rebuilt; Bullmark founded Marusan; Bullmark
1971 Popy formed within Bandai Bandai
1972 Popy's chogokin name and the GA-01 Mazinger Z Popy
1977 Bullmark closes Bullmark
July 1980 Bandai launches the Gundam plastic model Bandai
1989 Metal House established after Horikawa closes Metal House
1996 Medicom Toy founded Medicom
January to May 1997 Planned Bandai and Sega merger announced, then abandoned Bandai
September 2005 Bandai merges with Namco to form Bandai Namco Holdings Bandai
March 2006 Tomy and Takara merge to form Takara Tomy Takara Tomy
2009 Saburo Ishizuki revives Bullmark Bullmark
15 February 2018 Bandai Spirits established; adult-focused division moves across on 1 April Bandai
Terms

A Short Glossary of Houses and Marks

The terms below are used as the sources use them.

Term Meaning in these sources
Bandai-ya The 1950 name of Bandai, in use until July 1961.
Maruzan Marusan's name from 1967 to its bankruptcy in 1968.
Popy Bandai's character-toy subsidiary, formed 1971; revived in 2003.
Takara Tomy The merged firm of March 2006; Tomy abroad, Takara Tomy in Japan.
Tomica A Tomy-origin line of die-cast cars.
Plarail A Tomy-origin plastic electric train system.
Choro-Q A Takara-origin line of micro toy cars, also called Penny Racers.
OEM Making toys or parts for other companies, as Marusan did from the mid 1970s.
Licence holder The company that holds the right to make a character toy.
Importer The company that sold a toy abroad, not necessarily its maker.
Curiosities

Fun Facts About Houses

  • Bandai's first original product, in 1950, was a beach ball with a bell inside.
  • Crazy Foam sold 2.4 million units in three months in 1966, says Wikipedia.
  • Tomy's name abbreviates its founder's surname, Tomiyama.
  • Bandai planned to merge with Sega in 1997 and called it off within five months.
  • Bullmark's name for the monster toys was shortened to Bull, after the logo on the foot.
  • Bandai's elevators announce floors in the voices of characters, including Kamen Rider No. 1 and Amuro Ray.
Questions

What People Ask About Toy Makers

People ask who the biggest Japanese toy maker is. Wikipedia calls Bandai among the largest and most profitable toy companies in the world and says that, as the toy division of Bandai Namco Holdings, it was the world's second-largest toy company by total revenue in 2017. Takara Tomy is the other large Japanese name.

People ask whether Tomy and Takara are the same company. They have been since the merger of March 2006. Before it, Takara made Microman and Beyblade, among others, and Tomy made Tomica and Plarail, and in Japan both names are still used for the lines that came from each.

People ask where to find the maker's mark. The answer depends on the material. On tin it may be on the back or underside, and on soft vinyl a logo is sculpted into the foot. On a kit it is printed on the box and sometimes moulded on the runner. The guide to condition says to photograph all of these.

In the house

Makers at the Desk

The house shelf carries named makers on its product pages, among them Masudaya, Billiken Shokai and Alps. Stock changes; the shelf page shows what is here now.

Browse the toys shelf

Reader questions

Answered plainly

Which mark is Horikawa?

SH, as in the S.H Horikawa robots; Nomura is TN and Masudaya is M-T, according to the accounts read for this chapter.

Who made Bullmark toys?

Bullmark was founded in 1969 after Marusan's bankruptcy, closed in 1977 and was revived in 2009, says Wikipedia.

Who still makes tin robots?

Wikipedia calls Metal House the only traditional Japanese maker of battery-operated tin robots still in business.

What does an importer's name tell me?

The market the toy was made for, not necessarily the factory.

When was Bandai founded?

On 5 July 1950, as Bandai-ya, by Naoharu Yamashina; it became Bandai in July 1961.

Who founded Tomy?

Eiichiro Tomiyama, in 1924, as the Tomiyama Toy Manufacturing Company.

When did Tomy and Takara merge?

In March 2006, to form Takara Tomy.

What is Popy?

Bandai's character-toy subsidiary, formed in 1971, which named chogokin in 1972.

Keep reading

Where next

The almanacThe Japanese Toys Almanac, the hub this chapter belongs to.
BridgeThe Play and Living Almanac, the wing neighbour that holds golf and the household machines.
Evidence

Sources and image credits

Last reviewed 28 October 2026. Pictures, where shown, are public-domain or open-access and credited beneath each one.

Looking for a particular tin toy, doll or figure, or a view on one you own? The concierge desk replies within one to three business days.

Browse Retro, Vintage, Antique and Modern Toys · Make a private request