Chronoswiss Watches: Lang, the Régulateur, Lucerne and Japan
A Heuer watchmaker, a regulator dial, a glass back and a small house that kept the mechanical watch alive through the quartz years
Gerd-Rüdiger Lang learned watchmaking as a teenager in Brunswick, spent the 1960s and 1970s with Heuer, and lost that job when quartz watches emptied the trade. He answered by doing the one thing he knew, building mechanical watches, and in Munich in 1983 he gave the work a name: Chronoswiss. Four years later he made the Régulateur, the first wristwatch with a regulator dial built in series, and with it a set of house codes that still mark every model: the onion crown, the coin-edge bezel, the screwed lugs and a glass back that shows the movement. Since 2012 the house has belonged to a Swiss family and works from a glass-walled atelier in Lucerne, and its watches have been sold in Japan by three importers in turn, which is why so many well-kept examples are found there today.
In our Watch Almanac of houses, family trees and references, this house sits among the independents that grew out of the quartz years rather than in spite of them. For a buyer, that puts the study on three things at once: the dial layout, the calibre behind it and the hand that last serviced it. The chapters below follow the founder from the bench to his own workshop, then the Régulateur, the case, the complications of the 1990s, the calibres, the change of owners, the Japanese thread and the checks worth making before choosing one.
In brief
The essentials come first, each with a year, so that the detail that follows has a frame.
| Fact | Detail |
|---|---|
| Founder | Gerd-Rüdiger Lang, watchmaker, born in Brunswick in northern Germany, died in Starnberg in Bavaria in March 2023 at the age of 80 |
| Founded | 1983 in Munich, after two years of an independent chronograph workshop in the same city |
| Signature | The Régulateur of 1987, the first serially made wristwatch with a regulator dial |
| House codes | Onion crown, coin-edge bezel, straight screwed lugs and a glass case back |
| Early calibres | Old stock of movements from closed makers, chiefly the Enicar 165, reworked into house calibres such as the C.122 |
| Owners since 2012 | Oliver and Eva Ebstein, a Swiss couple who bought the company from the founder's family |
| Home today | Lucerne, Switzerland, in a glass-walled building opened in August 2014 |
| In Japan | Imported in turn by three companies; the present importer has held the brand since 2015 |
From Brunswick to the Heuer bench
An apprentice at fifteen
Lang left school at fifteen, and his father found him a place to learn the trade. He later recalled asking his mother, on the first morning, what a watchmaker actually was. The apprenticeship was with Jauns, a jeweller and watch shop in his home town of Brunswick, and it ran roughly from 1958 to 1961. He did well, and he concluded that to learn more he had to go to the country where watches were made.
Biel workbench
In 1964 he joined Heuer in Biel, the chronograph and stopwatch maker that later became TAG Heuer. He began in chronograph assembly, and in 1969 he was there when the first automatic chronograph calibre was presented, a joint project of Heuer, Breitling, Büren, Hamilton and Dubois-Dépraz. Chronographs became his lifelong subject; his own collection later ran to nearly a thousand of them, and he wrote a standard book on the chronograph wristwatch with Reinhard Meis. For the Heuer side of that story, see our guide to the Heuer Carrera, Monaco and Autavia.
Frankfurt, Munich and Formula One
At the end of the 1960s Lang moved back to Germany to help build the Heuer subsidiary there, first as workshop manager in Frankfurt and later in charge of internal service at Heuer Time in Munich. He also worked on the timekeeping side: Heuer timed Formula One races, and in 1970 Lang helped on the filming of the motor-racing film Le Mans with Steve McQueen. His German post is also placed at Kronberg im Taunus, near Frankfurt, with the title of after-sales service director.
The quartz blow
Quartz watches cut deep into Heuer in the 1970s, and at the end of 1979 the German subsidiary was closed and Lang was let go. He later admitted that he had briefly thought of leaving watches altogether and making dentures instead. Jack Heuer offered him the brand's German service work as a self-employed man, and Lang set up a workshop in his house, bought a full stock of spare parts and took 350 old Heuer chronographs to strip for parts as his starting capital. In 1980 he passed the master watchmaker's examination in Würzburg and served as a timekeeper at the Moscow Olympic Games. The deeper story of what quartz did to the trade is told in our history of the Seiko Astron, the first quartz watch.
I learned classic watchmaking. I couldn't make new quartz watches; this is another technique. Gerd-Rüdiger Lang, remembering the early 1980s
A workshop in Munich
Old movements, new cases
Lang's independent workshop repaired watches of every Swiss make, not only Heuer, and he travelled often in Switzerland to buy old movements and leftover stocks of chronograph parts that the trade no longer wanted. In 1981 he opened a specialist chronograph workshop in Munich. The first watches under the new name were assembled from those old parts in new cases, and the movements came largely from Enicar and Marvin, two Swiss makers that quartz and consolidation later closed.
A name that was not Lang
He could not use his own surname: a famous German house already carried almost the same name. The watches were made in Switzerland while the ideas came from Germany, so the name joined the two. The present-day Lange story is told in our guide to the Lange 1, Datograph and Zeitwerk. The name was registered as a protected trademark in 1984, and the first catalogue offered mechanical wristwatches and pocket watches made in Switzerland.
Glass backs from the start
In 1982 Lang showed a mechanical chronograph with a moon phase and a mineral-glass case back, and he put the Chronoswiss name on its dial. He later called himself the first to fit a glass back so the owner could see the movement, and he admitted he had been too young and inexperienced to patent the idea. He is widely remembered as the father of the glass back, at a time when the large Swiss houses kept their movements closed behind solid steel. Today the glass back is so common that few buyers think of it as an invention at all.
Why the 1980s mattered
In those years the survival of the mechanical watch was not assured. Lang named only one other man who had the same idea at the same time, in 1982: Jean-Claude Biver, then reviving Blancpain. He also recalled that the moment he knew mechanical watches were truly back came only around the year 2000. Germany's other independent makers of the period are covered in our guide to Sinn and its 903, 156 and EZM watches.
I wanted to show everybody the heart of the watch. The most important thing isn't the dial or the hands. Gerd-Rüdiger Lang on the glass case back
The Régulateur
A clock for watchmakers
A regulator dial gives the minute hand the centre of the dial to itself and moves the hours and seconds to small separate dials, usually above and below. The layout comes from the precision clocks that watchmakers kept in their workshops to set and regulate the watches on their benches. Those clocks left out the extra gearing that brings three hands to one centre, because every extra wheel was a small threat to accuracy. The layout is more than three hundred years old, yet no maker had put it into series production on the wrist before Chronoswiss.
A marine chronometer as the model
The model for the first Régulateur was a marine chronometer made by Vacheron & Constantin in 1908, with the regulator display credited to Louis Berthoud at the end of the eighteenth century. From that chronometer Lang also took the knurled bezel that became a house signature. He himself spoke of ships' clocks, and reckoned that changing two wheels in a movement was enough to make a regulator.
Basel and the first order
Lang built the first Régulateur, hand-wound, in 1987 and showed it in 1988, the year of the house's first appearance at the Basel fair. He recalled that, on the last day but one of that fair, a couple stopped at his window, studied the watch on his wrist and asked not how much it cost but how many he had. With that order, in his own telling, he more or less founded the brand. The second catalogue, in 1988, was the first to show the house's own models, the Regulator and the Pacific.
The calibre 122
The automatic version followed in 1990 with the calibre C.122, built on the Enicar 165. The house removed the date, added its own regulator train and a new one-way winding system, and decorated the movement afresh. It measures 26.8 mm across and 5.3 mm high, runs in 30 jewels at 21,600 vibrations an hour and holds about 40 hours of reserve. A watch made with that calibre in 2018 had changed very little since 1988, with the same onion crown, blued hands and engine-turned silver dial.
Not how much; how many. Gerd-Rüdiger Lang, remembering the first order for the Régulateur
The atelier on film
A short film made by the house shows the Lucerne atelier where dials are engraved by hand on old engine-turning machines. It is a useful companion to the chapters on the case and the dials, because the depth of a guilloché pattern is easier to see in motion than in a photograph.
The case and its codes
Onion crown, coin edge and screwed lugs
The Régulateur introduced the codes that identify the house at a glance: an onion-shaped crown, straight lugs, a finely fluted bezel and a case of many parts. The lugs are screwed rather than soldered, and the strap is held by exposed screws. On the Opus and later models the strap fixing is a patented system the house calls Autobloc. The coin-edge knurling links these watches to an older tradition of engine turning, the same one explored in our guide to Breguet's Classique, Marine and Type XX.
Thirty years, one case
Lang was proud that the case barely changed: thirty years, in his words, and the same case. The house today speaks of a 19-part construction for the original Régulateur case. Later cases run to similar counts; the Opus case of the 1990s has 23 parts, and a 2018 regulator case has 16. Many parts mean more joints, more seals and more surfaces to finish, which matters when a case is opened for service.
A sapphire window on both sides
Most models pair a sapphire front crystal with a sapphire or mineral-glass back, so the movement is always on show. The Timemaster of 2000 enlarged the onion crown and the luminous hands for a sportier watch. Later the house added pushers with flattened onion ends to match the crown on its chronographs.
The Chronoswiss case was always the same. Thirty years, the same case. Gerd-Rüdiger Lang
The complications of the 1990s
In the 1990s the house became one of the leading names in mechanical watches, with a collection built around the regulator, the elegant three-hand Kairos, the Delphis and the Chronoscope chronograph. Each new model took a known complication and found a new way to show it on the dial.
Kairos, 1991
The Kairos Chronograph of 1991 was the first automatic chronograph with the hours and minutes moved off centre. The Kairos name lived on in simpler date models for men and women, with guilloché dials, blued hands and the coin-edge bezel, and the new owners revived it again in 2012.
Cabrio and Orea
The Cabrio of the early 1990s was a reversible wristwatch, a rare idea for a mechanical watch of the period. The Orea brought white enamel dials back into series production, among the first of recent years.
Grand Régulateur, 1994
The Grand Régulateur of 1994 used a large Minerva movement, was limited to 600 pieces and could be worn as a pocket watch or set into a strap holder for the wrist. Pocket watches with that name still appear in Japan, some in yellow gold with a hand-wound calibre.
Opus, 1995
The Opus of 1995 was the first serially made automatic chronograph with a skeletonised movement. Its calibre, the C.741S, is a heavily reworked ETA Valjoux 7750, with 25 jewels, 28,800 vibrations an hour and about 46 hours of reserve. The movement has more than 300 parts; parts that are not needed are removed, and the rest are openworked and finished so that the switching of the chronograph can be watched through the dial. It won a German watch of the year award in 1996. Another chronograph pioneer that kept the mechanical faith through the quartz years is profiled in our guide to the Zenith El Primero, Defy and Chronomaster.
Delphis, 1996
The Delphis of 1996 joined three displays on one dial: a jumping digital hour, retrograde minutes and conventional small seconds. Its minute hand sweeps a half circle in an hour and then springs back as the hour disc turns, using energy stored in small springs under the dial. The model was put forward for a Swiss patent and went on sale in 1997. Another maker of jumping hours and playful displays is covered in our guide to Gérald Genta's Retro Fantasy and Gefica.
Repeaters and tourbillons
A tourbillon with a regulator dial and a cantilevered cage followed in 2000, and a quarter repeater, the Répétition à Quarts, in 2003. The quarter repeater's calibre, the C.126, adds a striking module made with Dubois-Dépraz to the Enicar base and is worked by a pusher at ten o'clock. The Chronoscope of 2001 was the first automatic chronograph with a regulator dial, and the Digiteur of 2005 showed hours and minutes in windows with no conventional hands. An older double-signed repeater with the name of the Swiss maker Kelek also turns up, a reminder that the house distributed Kelek in its early years.
Calibres and their origins
The house has always been open about building on bought-in movements and reworking them heavily. The early calibres drew on a store of old Enicar 165 movements, and later ones on ETA, Valjoux, Unitas and Sellita bases. The table sets out the calibres a buyer is most likely to meet.
| Calibre | Base | Used in | Notes |
|---|---|---|---|
| C.111 and C.112 | Marvin 700 | Early models | From the old stock of a closed maker |
| C.122 | Enicar 165 | Régulateur automatic, from 1990 | 26.8 mm, 30 jewels, 21,600 vph, about 40 hours, date removed |
| C.124 | Enicar 165 | Delphis | Jumping hour and retrograde minute work under the dial |
| C.125 | Enicar base | Chronoscope | Automatic winding with a single-button chronograph module |
| C.126 | Enicar 165 | Répétition à Quarts | 28 mm, 38 jewels, about 35 hours, quarter repeater module |
| C.741S | ETA Valjoux 7750 | Opus | Skeletonised, 25 jewels, 28,800 vph, about 46 hours |
| C.299 | Not published | Flying Regulator Open Gear, 2018 | 31 jewels, 28,800 vph, about 42 hours |
| C.6004 | Developed with La Joux-Perret | Delphis from 2023 | Jumping hour, retrograde minute, about 55 hours |
A movement built on old stock carries a practical question for any owner: whether the parts it needs can still be found. The house services its watches through its atelier in Lucerne and its regional centres, and it notes that its warranty on serviced parts has exceptions for vintage pieces. For calibres made from scratch by small houses, see our guide to Japanese independent watchmakers.
New owners and a Lucerne home
A difficult decade
In the 2000s the house found the going harder. Lang saw that he had to answer a fast-changing market, but he no longer found a consistent line for his new models. In December 2006 the company moved into a new factory at Karlsfeld near Munich, which it described as Bavaria's first wristwatch factory. A Swiss subsidiary at Nidau, near Biel, had looked after production and logistics since 2002.
The sale of 2012
Lang had hoped to hand the company to his daughter Natalie, who had trained as a watchmaker in Neuchâtel, but she did not want to run it. A large brand showed interest, but the talks failed; Lang feared a buyer who would keep the name and change the watches. In early 2012 the family sold Chronoswiss Uhren GmbH, then based in Karlsfeld, to Oliver and Eva Ebstein, Swiss investors with no earlier ties to the watch trade. Oliver Ebstein, born in Zurich in 1975, had worked in finance, consulting and mid-sized manufacturing companies. Lang stayed on as an adviser.
The move to Lucerne
The new owners found the company spread across four sites, two in Lucerne, one in Biel and one in Germany, and decided to bring everything under one roof. In August 2013 they announced that Karlsfeld would close, and in 2014 the head office moved to Lucerne. The House of Chronoswiss opened in August 2014 at Löwenstrasse 16 in the centre of the city, with 839 square metres and about 300 square metres of glass. Visitors can walk in from the street and watch the watchmakers at their benches and the enamellers and engine-turners at work. A German office stayed behind to handle marketing in that country.
A smaller, sharper collection
The new owners cut the range sharply: from about 150 references at the time of purchase to some 70 or 80, built around two lines, Sirius and Timemaster. They have kept the house a small one, with modest yearly output and a team in which watchmakers are only a handful. Movements came partly from the house's own reworked calibres and partly from Swatch Group movement makers. From 2023 the house added new automatic calibres developed with La Joux-Perret, among them the C.6004 for a revived Delphis.
Guilloché and enamel
A guilloché and enamelling atelier was set up in 2014, with a hand-operated rose engine nearly a century old. The house engraves patterns even on spherical surfaces, where the angle of the cutting tool must change constantly with the curve. Its enamel dials are fired at 750 to 900 degrees, sometimes up to seven times, and each layer is levelled by hand between firings. The owner seeks out old stocks of enamel from closed workshops, because modern machine-made enamels differ in colour. In 2025 the Pulse One brought the first titanium case with an integrated bracelet.
A gem of a company, in Oliver Ebstein's words on buying it in March 2012
Timeline
The dates that matter most to a buyer are set out below.
| Year | Event |
|---|---|
| 1964 | Lang joins Heuer in Biel |
| 1979 | Heuer's German subsidiary closes; Lang starts on his own |
| 1981 | A chronograph workshop opens in Munich |
| 1982 | A moon-phase chronograph with a glass back carries the Chronoswiss name |
| 1983 | The company is founded in Munich |
| 1984 | The name is registered as a trademark |
| 1987 | The hand-wound Régulateur is made |
| 1988 | First appearance at the Basel fair; the Régulateur and Pacific in the catalogue |
| 1990 | The automatic Régulateur with calibre C.122 |
| 1991 | Kairos Chronograph |
| 1994 | Grand Régulateur |
| 1995 | Opus and Lunar Chronograph |
| 1996 | Delphis |
| 2000 | Timemaster; regulator tourbillon |
| 2001 | Chronoscope, an automatic chronograph with a regulator dial |
| 2003 | Répétition à Quarts |
| 2005 | Digiteur |
| 2006 | Move to the Karlsfeld factory |
| 2012 | Sale to Oliver and Eva Ebstein |
| 2014 | House of Chronoswiss opens in Lucerne |
| 2015 | A new Japanese importer takes the brand |
| 2016 to 2018 | The Flying Regulator and its Open Gear version |
| 2023 | Death of the founder; new calibres; Delphis Oracle |
| 2025 | Pulse One in titanium |
The Japanese thread
Three importers
Chronoswiss reached Japan through importers rather than its own office. The first, World Tsusho, held the brand until June 2010; Euro Passion followed from July 2010; and since 2015 the importer has been Eiko Tokei, an Osaka-based watch distributor with branches in Tokyo, Sapporo, Sendai, Nagoya, Hiroshima and Fukuoka. Oliver Ebstein came to Japan for the press launch of the new arrangement in 2015. Eiko Tokei is a member of the Japan Watch Importers' Association, which lists the brand among its members' houses.
Where the watches were sold
New watches have been sold in Japan through department-store watch salons and specialist watch shops from Hokkaido to Kyushu, among them the watch floors of Isetan in Shinjuku and Mitsukoshi in Nihonbashi. That pattern, with service and papers routed through a domestic importer, is one reason Japanese examples so often come with a dated domestic guarantee card. The wider story of how such shops shaped Japanese taste is told in our history of Ginza and the watch.
A collector's brand in Japan
In Japan the house has long been seen as a German company that makes all its parts in Switzerland, in small numbers, with finishing done by hand. It is credited there with making the regulator dial familiar to the wider public. The Japanese brand pages present the same history in Japanese, and a Japanese professional footballer, Yuki Kobayashi, has worked with the house as an ambassador. Japanese magazines have also followed the new enamel and spherical guilloché dials closely.
What turns up in Japan
Pre-owned examples in Japan cover almost the whole catalogue: Régulateur and Régulateur Medium watches, Kairos and Sirius date models, Pacific, Lunar and Klassik chronographs, Timemaster flybacks, Delphis, Orea, Hora and the Grand Régulateur pocket watch. Many are offered as recently overhauled, and some come with their original boxes, spare straps and guarantee cards. Small accessories bearing the name, such as a folding loupe, a key ring and watch boxes, also appear, as does the founder's own book on chronographs. Why so many watches survive in this condition is explained in our essay on why Japan is the finest home for pre-owned luxury.
Reading a reference
The CH number
Every model carries a reference that begins with CH and four digits, engraved on the case back and printed on the guarantee card. The digits identify the model family and case, and letters after them usually mark a material or size: R for red gold, W for white gold, M for a medium case and, on recent models, T for titanium. The same four digits can mean different watches with different letters, so the full reference matters: a CH 7523 S is a steel Opus, while a CH 7523 without the S is a Lunar Chronograph. Newer references are written with a hyphen, as in CH-8753, and end in letter codes for the colours.
| Reference | Model | What to expect |
|---|---|---|
| CH 1223, CH 1223 M | Régulateur, Régulateur Medium | Automatic, calibre C.122, the classic regulator layout |
| CH 6322, CH 6326 | Régulateur, hand-wound | Manual winding, regulator dial |
| CH 6721 R | Grand Régulateur | The larger regulator; the R marks red gold |
| CH 2823, CH 2043, CH 2023 K | Kairos | Automatic date, guilloché dial, men's and women's sizes |
| CH 2843, CH 8923 | Sirius | Automatic date; some medium sizes set with diamonds |
| CH 7514, CH 2883 | Pacific | Automatic, the chronograph and date versions |
| CH 7523 | Lunar Chronograph | Chronograph with moon phase and date |
| CH 7520 to CH 7523 S | Opus | Skeletonised automatic chronograph, C.741S |
| CH 2833 LE, CH 7633 | Timemaster | Large onion crown; the CH 7633 is a flyback chronograph, some with the crown on the left |
| CH 1423 | Delphis | Jumping hour and retrograde minute |
| CH 1163 | Orea | White enamel dial |
| CH 1351 | Hora | Hand-wound regulator with jumping hour |
| CH 7403, CH 7442 | Klassik Chronograph | Automatic chronograph in a classic style, made with original tools from the 1940s |
| CH 8751 R | Flying Regulator Open Gear | Pink gold, limited to 35 pieces |
Treat the table as a guide to families rather than a complete register; the range held some 150 references when the house was sold. If a reference is not listed, the case back and the guarantee card together usually settle it.
Where records disagree
Several dates and figures in this story change depending on which record you read, and a careful buyer should know the alternatives.
| Question | Answers on record | Our reading |
|---|---|---|
| When was the house founded? | 1980; 1981; 1982; 1983 | 1983 for the company; the earlier years mark the workshop and the first signed dials |
| When did the Régulateur appear? | 1987; 1988 | Made in 1987, shown and sold from 1988 |
| When was the founder born? | 1943; 1944 | 1943, the year he later used for his own label |
| When did he die? | 2 March 2023; 3 March 2023 | 2 March 2023, the date in the house's own statement |
| How long was he at Heuer? | 28 years; 1964 to 1979 | About fifteen years as an employee, then years more as its German service agent |
| When was the company sold? | 2009; 2012; 2013 | Early 2012, the date of the announcements made at the time |
| How many references at the sale? | 150; 170 | About 150 to 170 |
| How many watches a year? | 2,000 to 3,000; about 5,000; about 7,000 | A few thousand, varying by decade |
| When did the Cabrio appear? | 1992; 1993 | The early 1990s |
The founding date
The founding date matters most because it is printed on anniversary models and repeated in many descriptions. The house dates itself to 1983, the year the company was formed in Munich. The earlier dates are not wrong so much as earlier milestones: the independent workshop from 1980, the chronograph workshop in Munich in 1981 and the first watch signed with the name in 1982. The thirtieth anniversary in 2013 and the fortieth in 2023 both count from 1983.
The Heuer years
Lang himself spoke of 28 years with Heuer, which fits only if his years as its independent German service agent after 1979 are counted. The years of employment, from Biel to the German subsidiary, run from 1964 to 1979.
The sale
The legal announcement of the sale is dated 12 March 2012, and the new owner first spoke publicly four days earlier. A date of 2009 also appears and probably reflects the start of talks after the financial crisis, while 2013 appears too.
A sceptic's view
The case against
A sceptic would say that the house was a watch assembler rather than a true manufacture: it bought old movements from closed makers and later bought new ones from the large Swiss movement makers. Early watches have tended to change hands at modest sums compared with the great houses, and the brand was valued mostly by collectors. The house also lost its way for a time in the 2000s. All of that is true.
The case for
Against that, the house did things first that the whole trade later copied: the serially made regulator wristwatch, the glass back and the skeletonised automatic chronograph. The reworking of the Enicar calibres was substantial, with new winding systems and regulator trains, not a change of name alone. And the watches have aged well; a 1988 design still made thirty years later is a rare thing. Today the Lucerne atelier engraves and enamels its own dials, which few houses of its size attempt.
Our view
Buy a Chronoswiss for the dial, the case and the history, and choose one whose movement has been well kept. The early regulators, the Opus and the Delphis are the watches that changed the field, and they are where the story is richest. Peers among the independents of the period are compared in our guide to Franck Muller's Cintrée Curvex and Crazy Hours.
Buy the watch for the dial and the case, and choose the best-kept movement you can find.
Before you buy
Service and parts
Ask when the watch was last serviced and by whom; an Enicar-based calibre needs a watchmaker who knows it. The house services its own watches through Lucerne and regional centres in Germany and the United States. The many-part case should be opened and resealed with care, and water resistance tested after any service. Many examples in Japan are sold as recently overhauled; ask for the date and the details of the work.
Papers, box and condition
A dated domestic guarantee card, the box and spare straps add confidence, and our note on why boxes and papers matter for a watch explains why. Read the condition grade as set out in our guide to Japanese condition ranks, and look closely at the coin edge and the onion crown, which show wear first. How Japanese owners keep such watches is described in our essay on how Japan cares for jewellery and watches.
Dial and hands
Check that the dial is original and unmarked, that the blued hands keep their colour and that the reference on the case back matches the guarantee card. On enamel dials such as the Orea, look for hairline cracks around the centre and the edges. Every piece we offer is covered by our authenticity guarantee.
Where it sits in a collection
For the wider field of watches worth keeping, see our guide to collectible watches, vintage and modern. Another German house that built its name on clean dials and in-house work is covered in our guide to Nomos Glashütte. The watches we hold now are on the collectible watches shelf.
Bringing one home
The steps for bringing a watch from Japan, from photographs to delivery, are set out in our guide to bringing a piece home from Japan. Ask for the dial, the case back and the guarantee card to be photographed in daylight before you decide.
Questions
Is Chronoswiss German or Swiss?
Both, in turn: it was founded in Munich in 1983 and has been based in Lucerne since 2014, with its watches made in Switzerland throughout.
Who founded it?
Gerd-Rüdiger Lang, a watchmaker who spent the 1960s and 1970s with Heuer and died in 2023.
What is a regulator dial?
A dial with a central minute hand and the hours and seconds on separate small dials, taken from the precision clocks of watchmakers' workshops.
Did Chronoswiss make its own movements?
It reworked other makers' movements heavily, first old Enicar and Marvin calibres, later ETA and Sellita bases, and from 2023 new calibres developed with La Joux-Perret.
Which models matter most?
The Régulateur, the Opus and the Delphis, each the first of its kind in series production.
Who owns it now?
Oliver and Eva Ebstein, who bought it from the founder's family in 2012.
Where to go next
If there is a particular Chronoswiss you would like from Japan, our private request desk at otoriyose will search with you.
Further reading
- Watch Almanac: houses, family trees and references, for where this house sits among the independents.
- Heuer's Carrera, Monaco and Autavia, for the house where the founder learned the chronograph.
- Zenith's El Primero, for another mechanical chronograph that outlived the quartz years.
- The collectible watches shelf, for the watches we hold now.
- Otoriyose, for a piece you have seen in Japan, and our authenticity guarantee.
References
- About Chronoswiss: history and DNA (maker’s history page)
- About Chronoswiss (Japanese) (maker’s Japanese history page)
- Watchmaking at Chronoswiss (maker’s atelier page)
- Enameling (maker’s enamel atelier page)
- Service and repair (maker’s service page)
- Chronoswiss (encyclopaedia entry)
- Chronoswiss (German) (encyclopaedia entry)
- Chronoswiss (Japanese) (encyclopaedia entry)
- In the early 80s quartz was king: this man had other ideas (interview with the founder, March 2021)
- Hands-on: the Chronoswiss Regulator Manufacture (watch magazine, August 2018)
- How the Chronoswiss Régulateur helped define 1980s watch style (men’s magazine)
- Regulators rule (watch magazine cover story with timeline, summer 2018)
- A pioneer of the mechanical renaissance: Gerd-Rüdiger Lang has died (German) (watch magazine, March 2023)
- Chronoswiss founder has died (German) (watch magazine, March 2023)
- Chronoswiss founder Gerd Rüdiger Lang dies (watch trade news, March 2023)
- In memory of Gerd Rüdiger Lang (1943-2023) (watch magazine, 2023)
- Obituary: Gerd-Rüdiger Lang (watchmaker’s memorial page, 2023)
- Advice on the acquisition of Chronoswiss (law firm press release, 12 March 2012)
- Chronoswiss: new leadership (watch magazine interview, 8 March 2012)
- Interview with Oliver and Eva Ebstein (watch magazine, September 2014)
- The House of Chronoswiss opens in Lucerne (watch magazine, August 2014)
- A new beginning for Chronoswiss (watch magazine profile)
- Ebstein and the genes of the mechanical watch (Japanese) (Japanese watch magazine interview, August 2015)
- Chronoswiss (Japanese) (Japan Watch Importers’ Association brand page)
- Chronoswiss stockists (Japanese) (Japanese importer’s store list)
- Supreme craftsmanship in the era of quiet luxury (Japanese web magazine, 2024)
- Chronoswiss C.122 (movement reference database)
- Chronoswiss calibre C122 (movement reference database)
- Chronoswiss C.126 (movement reference database)
- Chronoswiss calibres (watch encyclopaedia list)
- Introducing the Chronoswiss Opus Chronograph Flag (watch magazine, March 2021)
- Chronoswiss Opus automatic skeleton chronograph (watch blog, 2008)
- Chronoswiss Delphis (watch blog, 2008)
- Chronoswiss Flying Regulator Open Gear (watch review, 2018)
- Chronoswiss Flying Regulator Open Gear watch review (watch review, November 2018)