A. Lange & Söhne from Glashütte: Datograph, Zeitwerk, Saxonia
On 7 December 1845 a Dresden watchmaker of thirty, Ferdinand Adolph Lange, welcomed his first apprentices in Glashütte, an old mining town in the Ore Mountains, with a loan from the Saxon state to pay for them. A century later the firm he founded was bombed on the last day of the war, taken by the state in 1948 and folded into a combine in 1951, and the name disappeared. On 7 December 1990, two months after German reunification, his great-grandson Walter Lange registered it again. The first four watches of the new firm were shown on 24 October 1994, and every one of the 123 made was spoken for within minutes.
The short answer
A. Lange & Söhne is a German watch manufacture in Glashütte, Saxony, trading as Lange Uhren GmbH and owned since 2000 by Richemont, the Swiss group whose houses are mapped in our watch almanac. It makes about 5,000 watches a year with about 770 people, and its chief executive is Wilhelm Schmid. Each model has a movement of its own, and the house makes its own balance springs. In a 2019 survey it was reported as the most popular brand among German-speaking readers of luxury watches.
The families a collector meets
Six families cover nearly everything that reaches a collector. They differ less in style than in what the movement does, which is why the calibre is the first thing to learn.
| Family | Since | What it is |
|---|---|---|
| Lange 1 | 1994 | Off-centre dial, outsize date; Daymatic, Little Lange 1, Grand Lange 1, Time Zone |
| Saxonia | 1994 | Round, plain dress watches, including the Saxonia Thin |
| 1815 | 1995 | Arabic numerals and a railway-track minute scale, named for the founder's birth year |
| Datograph | 1999 | Flyback chronograph with a jumping minute counter |
| Zeitwerk | 2009 | Jumping digital hours and minutes behind a constant-force mechanism |
| Odysseus | 2019 | The first steel sports family, with an integrated bracelet |
What to treat with care
Three things need care. The modern firm is a refounding, not an unbroken line: the standard German account finds no direct legal continuity with the old company, only the name and the town. The first movements of 1994 borrowed their gear train from a Swiss calibre, which is no fault but should be named. And several dates, from the founder's birthday on, differ between good accounts; the table near the end sets them out.
Dresden, 1815 to 1841
Ferdinand Adolph Lange was born in Dresden in 1815 and raised in the family of a merchant friend of his father, by the house's account (A. Lange & Söhne). In 1829 he entered the Technische Bildungsanstalt, the city's technical school, and apprenticed himself to Johann Christian Friedrich Gutkaes; he finished in 1835 and worked as a journeyman from 1837.
Gutkaes and the five-minute clock
Gutkaes built the five-minute clock in the Semperoper, Dresden's opera house, with his students, Lange among them. Its numerals jump every five minutes in a window above the stage, and the house names it as the model for two later ideas: the outsize date of the Lange 1 and the jumping display of the Zeitwerk (A. Lange & Söhne). Gutkaes sent his pupil off with a short instruction not to forget his home, and Lange did not.
Paris and Winnerl
From 1837 Lange travelled, and spent about four years as workshop manager for Joseph Thaddäus Winnerl in Paris, a maker who had studied with Breguet, and attended the lectures of the astronomer François Arago. He came back to Dresden, likely in 1841, married Antonia Gutkaes, his master's daughter, in 1842, and took his master's diploma the same year (A. Lange & Söhne).
The Salon in the Zwinger today
The place where the story starts can still be visited. The Mathematisch-Physikalischer Salon in the Zwinger in Dresden says that Lange first conceived the idea of becoming a watchmaker there, and its arched gallery covers the beginnings of Glashütte watchmaking. It is open daily from 11:00 to 17:00 except Mondays.
Glashütte, 1845
From 1843 Lange wrote to the Saxon government with a plan: a watch manufacture for what he called the impoverished people of the Erzgebirge. In 1845 the ministry granted him 5,580 thaler, to be repaid in seven instalments between 1848 and 1854, and a further 1,120 thaler for tools. On 7 December 1845 he welcomed the first apprentices in Glashütte, and the firm was founded as A. Lange & Cie (A. Lange & Söhne).
Fifteen apprentices and a town of workshops
He started with fifteen apprentices and trained them to work as independent makers of parts, so that Glashütte became a cluster of small workshops around one firm rather than a single factory. He served as mayor of the town for eighteen years and died in 1875.
From the Paris line to the millimetre
Watchmakers of the day measured in Paris lines, one of which is 2.2558 mm. Lange worked in millimetres from the start, years before Saxony adopted the metre officially in 1858, and the house counts that among his first reforms (A. Lange & Söhne).
The sons, 1868 to 1945
Richard Lange joined his father in 1868 and the firm became A. Lange & Söhne; it moved into the building now called the Stammhaus in 1873. Richard is credited with jumping seconds, a power reserve marked "Ab" and "Auf" as on modern Lange watches, a split-seconds chronograph and an early automatic winding; ill health made him withdraw in 1887, leaving his brother Emil to run the firm. Emil received the Legion of Honour, and in 1898 Wilhelm II ordered a watch from the firm as a gift for the Ottoman sultan Abdul Hamid II; it is now in the Topkapı Palace.
Grand Complication no. 42500
The firm's most complicated pocket watch, no. 42500 of 1902, has 833 parts. It went to Heinrich Schäfer of Vienna; a team of five spent almost seven years restoring it, and it was shown at the SIHH in Geneva in 2010 and lent to the Mathematisch-Physikalischer Salon. The long story of such watches, from railway timekeepers to repeaters, is told in our guide to pocket watches.
A spring alloy and a lean decade
In 1931 the firm's Richard Lange patented a balance-spring alloy with beryllium that became the basis of the later Nivarox alloys. Wristwatches arrived badly for the firm. By most accounts it had no wristwatch movement of its own after the First World War, had to buy movements in, set up a subsidiary in Geneva in 1927, and by 1930 employed as few as 40 people.
War, expropriation and VEB GUB
Under the Nazi state the firm was one of five German makers of the B-Uhr, the large observer's watch for the Luftwaffe, with about 13,500 made on calibres 48 and 48.1. Thirty French prisoners of war reached a forced-labour camp in Glashütte on 14 September 1940, and by 1942 civilian watches could no longer legally be made, and that forced labour spread through the town's factories. The firm used slave labour.
8 May 1945 and 1948
The main building was destroyed in an air raid on 8 May 1945, the last day of the war in Europe. In 1948 the firm was expropriated; calibre 28 went into production in 1949, signed "Lange VEB", and in 1951 the firm was merged into VEB Glashütter Uhrenbetriebe, the state combine known as GUB, and the name dropped out of use. Walter Lange, born in 1924 and at watchmaking school from 1941 (A. Lange & Söhne), left Glashütte in 1948.
Refounded on 7 December 1990
The refounding was the work of two men. Walter Lange was one. The other was Günter Blümlein, born in 1943, who had run IWC since 1980 under the German instruments group VDO, which also held the majority of Jaeger-LeCoultre. On 7 December 1990, the day the founder had opened his workshop 145 years earlier, the two registered Lange Uhren GmbH in Glashütte. How IWC was run in those years is in our IWC guide.
"All we had was the vision of once again crafting the world's best watches in Glashütte."Walter Lange, quoted by A. Lange & Söhne · read
Blümlein and the Wall
Gisbert Brunner told a Tokyo audience in 2018 that Blümlein's idea came from watching the Berlin Wall fall in 1989, and that Albert Keck of Mannesmann, who had studied watchmaking himself, backed it. Brunner added that forty years of a planned economy had left Glashütte with no idea of luxury, so the know-how had to come from IWC. Renaud et Papi, now Audemars Piguet Le Locle, was hired to design movements, parts were made at Jaeger-LeCoultre and technicians were trained at IWC.
The name and the trademark
The name itself had to be bought back. The trademark rights passed with the expropriation to GUB and, after reunification, to the Treuhandanstalt, the trust that sold off East German state firms, before Lange Uhren acquired them. Blümlein died on 1 October 2001, a year after the group he had built, LMH, was sold to Richemont; Walter Lange died in January 2017, aged 92.
24 October 1994
The first collection was shown on 24 October 1994 in the Dresden Royal Palace, with Blümlein, Walter Lange and Hartmut Knothe present. There were four models: the Lange 1, the Arkade, the Saxonia and the Tourbillon "Pour le Mérite", the last with the first chain and fusee in a wristwatch.
Four models, 123 watches
In four models on three calibres, and all were spoken for within minutes; the last three were allotted by drawing matchsticks. Walter Lange called it the most exciting moment of his life. In a 1994 interview with Gisbert Brunner, Blümlein said the new watches were "anything but epigones" of the old legends. Three of the four used the outsize date, the subject of the house's first patent, in 1992 (A. Lange & Söhne).
Dial first, movement after
In the watchmaker Kurt Klaus's telling, the Lange 1 dial was drawn by Klaus, Blümlein and the designer Reinhard Meis in Blümlein's office at IWC, and the movement was designed to fit the dial, not the other way round. The same account says the gear train of the Lange 1, the 1815 and the Saxonia of the first years is that of Jaeger-LeCoultre calibre 822. Its maker is in our Jaeger-LeCoultre guide.
German silver, three-quarter plates, double assembly
Plates and bridges are of untreated German silver, an alloy of copper, nickel and zinc, which takes deep Glashütte ribbing and turns from grey towards gold with age.
The three-quarter plate
A three-quarter plate covers most of the wheel train with one piece of metal, leaving the balance free under its own cock. It is stiffer than separate bridges and harder to assemble. The firm introduced it in 1864; Lange is often called its inventor, though there was earlier British work. There is a cost: in a Saxonia Thin it hides most of the movement.
Engraved by hand
Every balance cock is engraved freehand, so no two are the same (A. Lange & Söhne). The house is reported to have six master engravers; bevels are cut at 45 degrees, and black polish is kept for a few parts, such as tourbillon bridges and cages, where one part can take up to five days.
Assembled twice
Each movement is put together, adjusted and checked, then taken apart, cleaned and decorated, and put together again. This double assembly is standard practice.
Watches are dropped from a metre, chronograph pushers are pressed 50,000 times, and cases go through temperatures from minus 20 to 80 degrees Celsius.
The Lange 1
The Lange 1 is the watch most people mean by the name. Its dial is off-centre, with the hours and minutes to the left and the outsize date at upper right; the house says the elements are laid out on the golden ratio and the points of an isosceles triangle, so that none overlaps another (A. Lange & Söhne). The original case is 38.5 mm.
The outsize date
The date sits in two windows, a disc for the units and a cross for the tens, so that the figures can be about three times the usual size. The house gives the mechanism 66 parts and a clearance of 0.15 mm between the two (A. Lange & Söhne). The idea goes back to the Semperoper clock, and the house keeps it as its signature.
From L901.0 to L121.1
The first calibre, L901.0, was first sketched in 1990, hence the number. It has 53 jewels, nine of them in gold chatons, and a swan-neck fine adjustment. In 2015 it gave way to calibre L121.1, in a case 9.8 mm thick; the new calibre gave up the "go-around" solutions of the first and carries a clean three-quarter plate.
Fifteen models and a moon of 122 years
The Lange 1 family has grown to about fifteen models and, 45 prizes. The moon phase, says the same account, needs correcting by a day only every 122.6 years; the house gives its precision as 99.998 per cent. The Daymatic of 2010 mirrors the dial and replaces the power reserve with a retrograde day.
The Datograph, 1999
Five years after the debut the house showed its first chronograph, the Datograph, at Basel in 1999. Calibre L951.1 is 30.6 mm across and 7.5 mm thick, runs at 2.5 Hz with 36 hours of reserve, and combines a column wheel, a horizontal clutch, a flyback and a minute counter that jumps rather than creeps. The outsize date sits under the twelve. The first series ran from 1999 to 2012, when the Up/Down added a power reserve.
"The best chronograph movement ever made."Philippe Dufour on the Datograph in 2007 · read
Why collectors reach for it
The reason is on the back. The Datograph shows its levers and bridges under a sapphire back in a way few chronographs do, and the jumping counter makes elapsed minutes easy to read. By its 25th year, in 2024, it was clear it had shaken the watch world a second time. The heirs of the Datograph are the Double Split of 2004 and the Triple Split of 2018.
The Zeitwerk, 2009
The Zeitwerk of 2009 shows the hours and minutes in figures that jump once a minute across the dial, with the small seconds below and a power reserve above. Calibre L043.1 has 68 jewels, runs at 18,000 vibrations an hour with 36 hours of reserve and sits in a case 41.9 mm across and 12.6 mm thick. Moving three large discs at once takes a burst of force, so a constant-force remontoire stores energy and releases it every sixty seconds. It won the Aiguille d'Or in Geneva in November 2009.
Pallweber and Jens Schneider
Jumping hours and minutes were patented in the 1880s by Josef Pallweber; IWC made pocket watches under his patent, and the Zeitwerk realised his idea in a reliable wristwatch more than 120 years later. Its display was the work of Jens Schneider, a prototype maker at the house.
It was not loved by everyone. Critics at the launch called it un-Lange, and quotes Wilhelm Schmid saying that the house questions everything except that its watches are mechanical.
Saxonia and 1815
The Saxonia is the plainest Lange: round, with baton indices and a small seconds. The first ones of 1994, refs. 102.001 and 102.002, were 34 mm with calibre L911.3 under a solid back. From 1997 calibre L941.3 took over, with 164 parts, 3 Hz and 45 hours of reserve, and from 2007 the case grew to 37 mm.
The Saxonia Thin
The Saxonia Thin measures 37 by 5.9 mm, with calibre L093.1. Set against the Calatrava ref. 5119, 36 by 7.2 mm, the Lange movement is richer in finish but more hidden by its three-quarter plate. The Geneva side of that comparison is in our Patek Philippe guide.
The 1815 and the railway track
The 1815, in the catalogue since 1995, is named for the founder's birth year. It has Arabic numerals and a railway-track minute scale (A. Lange & Söhne). Its complications include the 1815 Tourbillon, which can stop the seconds and reset them to zero, and the 1815 Chronograph with a flyback and a jumping minute counter (A. Lange & Söhne).
The Odysseus, 2019
In 2019 the house showed its first steel sports family. The Odysseus has an integrated bracelet, water resistance to 120 metres and calibre L155.1 Datomatic, an automatic with 31 jewels, 28,800 vibrations an hour and 50 hours of reserve, in a case 40.5 mm across and 11.1 mm thick.
Steel before the Odysseus
Steel had been very scarce at Lange before. The earlier steel watches were a Lange 1 in twenty pieces, a single Homage to Walter Lange and a one-off Double Split.
Homage to Walter Lange and the record watches
After Walter Lange died, the house made the 1815 Homage to Walter Lange, with calibre L1924, named for his birth year, in 145 pieces of pink gold, 90 of white gold and 27 of yellow gold. One more was made in steel, in a 40.5 mm case. It was parted with for the charity Children Action in May 2018 (A. Lange & Söhne).
The modern Grand Complication of 2013 was made in six pieces.
Reading a calibre and a reference
Lange calibre numbers carry their own history. Take L043.1: the 04 means work began in 2004, the 3 that it was the third project begun that year, and the.1 that it is the first version. The house says it has made more than 70 calibres since 1994 (A. Lange & Söhne).
| Calibre | From | Watch and notes |
|---|---|---|
| L901.0 | 1994 | Lange 1, hand-wound; gear train from JLC 822 |
| L911.3 | 1994 | Saxonia 34 mm, behind a solid back |
| L941.3 | 1997 | Saxonia, 164 parts, 45 hours |
| L951.1 | 1999 | Datograph, flyback with jumping minutes |
| L043.1 | 2009 | Zeitwerk, constant-force remontoire |
| L121.1 | 2015 | Lange 1, new hand-wound calibre |
| L021.1 | Daymatic | Automatic, 50 hours, 67 jewels |
| L155.1 | 2019 | Odysseus Datomatic, 50 hours |
References
Model references run as three digits, a point and three digits: 101.001 for the first yellow gold Lange 1, 102.001 for the first Saxonia, 320.040 for the Ginza Daymatic described below. Read the reference against the case back and the papers before anything else.
Glashütte Original is another house
The other famous name in the town is not part of Lange. Glashütte Original grew out of GUB, which became a private firm in 1990; Heinz W. Pfeifer bought and renamed it in 1994, and it now belongs to the Swatch Group, not Richemont. The two share a town and a craft, which is why they are confused.
Two Glashütte Original watches
Two of its watches are in our care: the Senator Sixties ref. 1-39-52-01-01-04, an automatic in rose gold, and the Senator Chronometer Regulator ref. 1-58-04-04-05-50, hand-wound in rose gold.
Japan: Ginza since 2008
Japan is an extremely important market for A. Lange & Söhne. In Japan it is counted with Patek Philippe, Audemars Piguet, Vacheron Constantin and Breguet among the five great watch houses; the initial "A." is usually not pronounced there, and like Patek Philippe the house does not hire brand ambassadors. Why watches of this kind are kept so well in Japan is the subject of our essay on the Japanese market.
Namiki-dori, 2008 and 2016
The house opened its boutique in Tokyo in 2008 on Namiki-dori in Ginza, the first it ran directly in Japan (A. Lange & Söhne). On 3 July 2016 it moved a few dozen metres towards Shimbashi and reopened as A. Lange & Söhne Ginza, on the ground floor of a building at 6-7-15 Ginza, about 100 square metres and about 1.3 times the old shop. Jaeger-LeCoultre opened its own boutique next door on the same day. The street and its watch shops are mapped in our guide to Ginza and the watch.
Oak, steel and a bowl of matcha
The 2016 room was built around the idea of discovery, with German oak, furniture made for the house and steel frames bevelled at 45 degrees like a movement part. Those who bought a watch were served matcha in a tea bowl made for the boutique. For the opening the house brought a terra-brown Saxonia Automatic of 38.5 mm with calibre L086.1 and 72 hours of reserve, the first Saxonia with a brown dial.
Twenty Daymatics for Ginza
For the tenth year the house made the Lange 1 Daymatic Ginza Boutique 10th Anniversary, ref. 320.040: twenty pieces in white gold, 39.5 mm and 10.24 mm thick, with a guilloché dial of solid white gold, blue hands and indices, and calibre L021.1, an automatic of 67 jewels and 50 hours. It took two years to develop, from a request made in Japan, and each came in a wooden box with its serial number engraved on the back. The boutique marked the date on 25 February 2018 with a talk by Gisbert Brunner.
Visiting today
The house's page now gives the boutique's hours as 11:00 to 19:00 every day (A. Lange & Söhne); the 2016 reports said it closed on Wednesdays. Check before you go.
A. Lange & Söhne on film
The house's own short film for the Homage to Walter Lange takes its title from his line that one should never stand still. For a longer view, there is the house's 22-minute documentary "A Legend Comes Home".
What to check before buying
Most Lange watches were made after 1994, and the house can service and identify them. For anything we offer we do the checks set out in our authenticity guarantee.
Lange 1 and Saxonia of the 1990s
The first watches of 1994, such as ref. 101.001, had solid backs, and a transparent back followed a year later; ask about any change. On a first-generation Lange 1, look for calibre L901.0; a watch with L121.1 dates from 2015 or later. Check that the two date windows of the outsize date change cleanly at midnight and that the power reserve runs down as it should.
Datograph and Zeitwerk
On a Datograph, start, stop, reset and fly back the chronograph several times, and watch the minute counter jump. Know which series it is: 1999 to 2012 without power reserve, the Up/Down from 2012. On a Zeitwerk, watch the change at the top of the hour, when all three discs move at once; a slow or partial jump means a visit to the workshop.
Steel and limited pieces
Steel before 2019 is almost always a limited or single piece and should come with papers that say so. A Ginza Daymatic should carry ref. 320.040, its number of twenty on the back, the blue dial and the wooden box.
Boxes, papers and grades
Lange watches in Japan often come with the box, the certificate and service records, for reasons set out in our piece on how Japan keeps things in the box and our essay on documents as value. What a full set adds to a watch is weighed in our guide to box and papers. Read the grade in our guide to Japanese condition ranks and our own scale in our grading and condition guide, and ask what the letter means for the case, the dial and the movement separately. Our guide to collecting watches sets Lange among its peers.
Where the records disagree
| Point | One account | Another account |
|---|---|---|
| Founder's birthday | 25 February 1815 | 18 February 1815 |
| Three-quarter plate | 1864 | 1865 |
| Who invented it | Lange, the inventor | Developed by Lange |
| Calibres since 1994 | 63 | More than 70 (A. Lange & Söhne) |
| Richemont | 2000 | 2001 |
| Mannesmann and VDO | Bought VDO in 1991 | Took over the group from 1994 |
| Return to Dresden | "Likely in 1841" (A. Lange & Söhne) | 1841 |
| Daymatic winding | Automatic, L021.1 | Hand-wound |
| Ginza hours | Closed Wednesdays (2016 press) | Open every day (A. Lange & Söhne, now) |
How we read the table
We give both sides where two good accounts differ and prefer the house's own records where it has shown them. The Daymatic is automatic: the calibre and the house both say so. The founder's birthday and the year of the three-quarter plate need a primary document, and we have not seen one.
A counterpoint
The case against the story is fair. The modern firm was refounded with Swiss money, Swiss engineers and, at first, a Swiss gear train; the old firm made military watches with forced labour; and the three-quarter plate hides much of the work it decorates.
And yet the movements since 1994 are the house's own, finished to a standard few match and assembled twice. Each family solves a real problem, from a date that can be read across a room to a jumping display that needed a constant-force mechanism to work. Judge a Lange by its calibre, its condition and its papers, and let the house's records settle the rest.
Questions readers ask
Who owns A. Lange & Söhne?
Richemont, since 2000 by most accounts; 2001 is also given.
Is it the same company as before the war?
No. The old firm was expropriated in 1948 and merged into GUB in 1951. Walter Lange and Günter Blümlein founded Lange Uhren GmbH in 1990 and bought back the name.
Is Glashütte Original part of Lange?
No. It came out of GUB and belongs to the Swatch Group.
What is the outsize date?
A date shown in two windows, a disc for the units and a cross for the tens, so that the figures are about three times the usual size. It was the house's first patent, in 1992.
Which Lange is steel?
The Odysseus, since 2019. Before it, only a few limited or single pieces.
Where is A. Lange & Söhne in Tokyo?
On Namiki-dori in Ginza, at 6-7-15 Ginza, since July 2016. Check current hours before going.
If you have a particular A. Lange & Söhne in mind, a first-series Lange 1 with its solid back, a Datograph before the Up/Down, a Saxonia, an early Zeitwerk or the Ginza Daymatic, tell us the reference and the condition you hope for. We will send photographs of the dial, the case back, the movement and the papers before you decide.
Begin a Hunting Salon request See the collectible watchesFurther reading
- The watch almanac, for Richemont and its houses
- Jaeger-LeCoultre, for calibre 822 and the Joux
- IWC, for Blümlein's other house
- Ginza and the watch, for the street of the boutique
- Glashütte’s other house: Nomos Glashütte, the Tangente and the Orion.
- The other house in the high-horology trio: Vacheron Constantin.
- A Richemont sibling, with the Minerva chronographs inside: Montblanc’s watches.
- Junghans, for the Max Bill, the Meister and the Mega from the Black Forest
- Tutima's watches, for the Glashütte pilot's chronograph of 1941, the 798 and the Patria
- Mühle-Glashütte: the Rescue-Timer, 29er and Teutonia, for the 1869 instrument workshop and its woodpecker-neck regulation
- Chronoswiss: the Régulateur, the Opus and the Delphis, for Gerd-R. Lang's 1987 regulator dial and the Enicar-based calibres
- The collectible watches, for the watches in our care
The Japonista Curation and Concierge Team, Tokyo, Japan
References
- A. Lange & Söhne, early years
- A. Lange & Söhne, the rebirth
- A. Lange & Söhne, Walter Lange
- A. Lange & Söhne, Lange 1
- A. Lange & Söhne, 1815
- A. Lange & Söhne, Ginza boutique
- Wikipedia, A. Lange & Söhne
- Wikipedia, A. Lange & Söhne (German)
- Wikipedia, A. Lange & Söhne (Japanese)
- Wikipedia, Günter Blümlein (German)
- Wikipedia, Glashütte Original
- Mathematisch-Physikalischer Salon, Dresden
- SJX, Lange finishing
- SJX, designing the Lange 1
- Langepedia, Lange 1
- Langepedia, Datograph
- Langepedia, Zeitwerk
- Langepedia, Saxonia
- Langepedia, 1815
- QP, A Legend Comes Home
- Deployant, Saxonia Thin and 5119
- Grail Watch, history
- Goethe-Institut, the Lange 1
- Forza Style, Lange 1 Daymatic (Japanese)
- Hodinkee, Ginza Daymatic (2018)
- Hodinkee Japan, Blümlein and the Datograph (Japanese, 2024)
- Hodinkee Japan, the Odysseus (Japanese, 2020)
- Chronos, Ginza talk (Japanese, 2018)
- Chronos, the Odysseus (Japanese)
- Chronos, the house and its movements (Japanese)
- Chronos, history and models (Japanese)
- Chronos, the Zeitwerk (Japanese)
- Openers, Ginza (Japanese, 2016)
- WWD Japan, the Ginza boutique (Japanese, 2016)
- GQ Japan, the Ginza boutique (Japanese, 2016)
- GetNavi, Namiki-dori (Japanese, 2016)
- Openers, Ginza Daymatic (2018)
- A. Lange & Söhne, Never Stand Still: Homage to Walter Lange (video)