Vanguard, Maxim and the A-11: A Collector's Guide to Waltham Watches, from Massachusetts to Tokyo
Roxbury, the Charles River and a railway office in Meiji Tokyo
In 1850 a watchmaker from Maine and a clockmaker from Boston set out to make watches the way Springfield made muskets, from parts so alike that any one would fit any watch. Within thirty years their factory on the Charles River employed about 900 people, a Swiss delegate came home from Philadelphia warning that his industry would be destroyed, and the name Waltham had reached the railway offices of Meiji Japan. The factory closed in the 1950s; the name lived on, for three decades of it in Tokyo.
Waltham is the root of the American branch in our Watch Almanac of houses, family trees and references, the company that turned watchmaking from a craft of single pieces into a factory trade. For a collector in Japan it is also two quite different things on one shelf: American pocket watches from the great years in Massachusetts, and Swiss-made wristwatches from the decades when the name belonged to a Tokyo importer. Knowing which one is in your hand is the whole art of buying a Waltham.
Waltham in brief
The Waltham Watch Company was the first American factory to make watches by machine from interchangeable parts. It began in Roxbury, Massachusetts, in 1850, moved to the town of Waltham in 1854, and over the next century made tens of millions of movements, from inexpensive seven-jewel pocket watches to railroad grades, military wristwatches and aircraft clocks. Watch production in Waltham ended in the 1950s. A Swiss subsidiary founded in 1954 kept the name alive outside North America; from 1981 that name belonged to Heiwado & Co., a Tokyo importer, and since 2011 the Swiss company has been controlled by Antonio DiBenedetto.
Key facts
| Item | Detail |
|---|---|
| Founded | 1850 in Roxbury, Massachusetts, by Aaron Lufkin Dennison and Edward Howard with the backing of David P. Davis and Samuel Curtis |
| Factory | Waltham, Massachusetts, on the Charles River, from 1854; watch production ended in the 1950s |
| Names | American Horologe Company, Warren Manufacturing Company, Boston Watch Company, American Watch Company, American Waltham Watch Company (1885), Waltham Watch Company (1907) |
| Known for | The American system of watch manufacture, railroad grades such as the Vanguard and Crescent Street, the A-11 and A-17 military watches |
| Output | About 40 million timepieces by the company's own count |
| Japan | Waltham pocket watches adopted as the first standard railway watch in 1897; the name owned by Heiwado & Co. of Tokyo from 1981 |
| Today | Waltham Watch Company SA, Switzerland, majority-owned by Antonio DiBenedetto since 2011; the North American mark held separately |
Three facts decide almost every purchase. First, any Waltham pocket watch made before the 1950s carries a serial number on the movement, and that number dates it to within a year or two. Second, the grade name on the movement, Vanguard, Crescent Street, Riverside, Appleton Tracy or William Ellery, tells you its rank in the factory's hierarchy, and a grade name is not an owner's name. Third, a Waltham wristwatch with a Swiss movement and a Japanese warranty card belongs to the Tokyo era, a different and much later story from the American pocket watch.
A grade name on the movement is the factory's rank, not the name of a former owner.
A volunteer at the Charles River Museum of Industry and Innovation in Waltham brings the factory's automatic screw machine back to life, the kind of tool that made interchangeable parts possible.
A shoemaker's son and a scale maker
Before 1850 almost every watch sold in America came from England or Switzerland. Clocks had already moved from the bench to the factory in New England during the first quarter of the century, and the man who wanted to do the same for watches was Aaron Lufkin Dennison, the son of a shoemaker, born in Freeport, Maine, in 1812.
Dennison before Waltham
Dennison was apprenticed in 1830 to James Cary, a clock and watchmaker in Brunswick, Maine, and during that apprenticeship built a machine for cutting wheels automatically. In 1833 he went to Boston as a journeyman with Currier & Trott, then worked under Tubal Howe at Jones, Low & Ball until 1839, when he set up on his own. In 1844 he started a paper box business, later the Dennison Manufacturing Company, and in 1849 he handed it to his brother Eliphalet so that he could give his whole attention to watches.
Howard, Davis and Curtis
In 1849 Dennison approached Edward Howard, a Boston clock and scale maker who had once hoped to build locomotives. David P. Davis, who knew manufacturing, and Samuel Curtis, who supplied money, joined them, and an initial $20,000 was raised. The venture was called the American Horologe Company, then the Warren Manufacturing Company, and Dennison was paid $1,200 a year to run it. His partners sent him to Britain to learn what he could and to buy supplies; he came home convinced that English watchmaking was barely mechanised and that an American factory could beat it.
Eight days, then thirty-six hours
The partners built a brick building 100 feet long on land that Howard and Davis already owned in Roxbury. The first model was a watch that ran for eight days on a single mainspring barrel. It was too expensive to make and did not keep time well enough, and only about 19 were produced. The national history museum in Washington keeps a prototype made around 1852 by Oliver B. Marsh in an 18-carat gold case; the first seventeen watches were made largely by hand by Oliver and David Marsh, using a going barrel rather than the chain and fusee of English watches. A second, more conventional model followed, and it sold. In 1853 the business took the name Boston Watch Company.
The first model ran for eight days, cost too much to make and did not keep good time; about nineteen were built.
The third batch of the new watches, 900 movements, sold cased for about $40, against roughly twice that for imported pieces of similar quality. That price gap was the whole point of the experiment: a machine-made American watch that a clerk or a railwayman could afford.
The Watch City, 1854 to 1857
Roxbury soon proved too small. Dennison looked for a site in the country and chose Waltham, ten miles west of Boston on the Charles River, where local residents put money into land and buildings through a development company he set up, the Waltham Improvement Company. One hundred acres were bought and a new factory opened in 1854.
Ninety workers on the Charles
At the start the Waltham factory had 90 workers and made 30 watches a week. That was not enough to pay for the machinery. In 1856 the Improvement Company guaranteed $6,000 in notes to cover the deficit, and in the third quarter of that year an economic crisis cut sales sharply. The partners put in their own savings and raised another $20,000 by selling exclusive selling rights to a large New York jeweller, but it was not enough.
Foreclosure and Royal Robbins
At the end of February 1857 the Waltham Improvement Company foreclosed on its mortgage, and the property went at a sheriff's sale to Royal E. Robbins, a New York watch importer, for $56,000. Edward Howard took much of the remaining machinery and stock back to Roxbury and founded the Howard watch company; Dennison stayed in Waltham as superintendent of the mechanical department until he was dismissed in 1861 or 1862, the date depending on whose account you read. Robbins, with his brother Henry and Daniel F. Appleton, ran the business with the caution of men who had spent their lives selling watches, and survived the panic of 1857.
The new company was incorporated in 1858 with a capital of $200,000, soon raised to $300,000, as the American Watch Company. The name Waltham Improvement Company lived on in the streets the factory built: by 1876 nearly 300 houses had gone up on its land south of the river, many built by the workers themselves. The town took the nickname Watch City, and today the factory buildings, listed on the State and National Registers of Historic Places in 1989, appear on the seal of the City of Waltham.
By 1876 nearly 300 houses stood on the company's land south of the river, many built by the workers themselves.
The American system
What made Waltham matter was not any single watch but a method. Instead of a craftsman fitting each part to its neighbour, the factory made every part to gauges, so that a wheel or a screw from one movement would fit another of the same model. Historians call this the American system of manufacture, and Waltham was the first to apply it to watches on a large scale.
Interchangeable parts and the Civil War
The Civil War tested the method. Demand for watches rose sharply after 1861, especially among soldiers who wanted a timepiece they could afford, and the company answered with a seven-jewel model sold for $13, the William Ellery. By the end of the war the Ellery made up 45 per cent of the company's annual sales. Grades like this, plain but dependable, were the backbone of the business for the next half-century.
The screw machine of 1871
The machines themselves became the company's pride. In 1871 Charles Vander Woerd, an engineer at the American Watch Company, built an automatic screw machine with more than twenty moving parts that turned, threaded and cut watch screws without a hand on the work. The Charles River Museum of Industry and Innovation in Waltham has one running again, and the film above shows it at work.
Philadelphia, 1876
At the Centennial Exhibition in Philadelphia in 1876 the company showed its automatic screw-making machinery and won the first gold medal in a watch precision contest. The Swiss delegates were shaken. Théodore Gribi, who led their delegation and sat on the jury, wrote that he had examined the products and tools of the Waltham company and was filled with admiration for both, and that the Swiss had been left behind.
A Swiss report kept quiet for 115 years
The same year Jacques David, an engineer who later became director of Longines, went to the United States to study the American factories. In January 1877 he reported to the watch industries of the Jura that Waltham's buildings covered two acres and held about 900 workers, that its tools were valued at $400,000, and that the factory was capitalised at $1.5 million. His conclusion was that the Swiss industry would be destroyed unless it changed. The report was copied by hand, kept from American eyes, and suppressed until Longines published a facsimile in 1992. The Swiss rebuilt their industry around machine production, which is why our chapter on Longines and Saint-Imier is in part a reply to Waltham.
A Swiss engineer came home from Massachusetts in 1876 and warned that his industry would be destroyed unless it changed.
The traffic also ran the other way. In 1868 an American watchmaker, Florentine Ariosto Jones, founded the International Watch Company in Schaffhausen to make watches with Swiss labour by American methods, the story told in our guide to IWC. Dennison himself went to Zurich in the 1860s to organise the supply of fine parts to the Tremont Watch Company of Boston, and from 1871 settled in Birmingham, where the case business he had started around 1862 became Dennison, Wigley & Co. in 1879 and, under the Dennison name, made cases until 1967.
Lincoln's William Ellery
The most famous Waltham of all is a plain silver key-winder. The factory's production ledgers show that movement number 67613, a William Ellery grade, was made in January 1863 as an 18-size full-plate movement with seven jewels and a solid steel balance, and fitted in a coin silver case numbered E279. At some point during the Civil War it came into the hands of Abraham Lincoln, the only American-made watch the president is known to have owned.
Grades named after people
The name on that movement is a grade, not an owner. Waltham named many of its grades after local people, valued employees, founders and former names of the company, and in the case of the Home Watch Co. grade after a company that never existed. William Ellery was the least expensive Civil War grade, while Appleton, Tracy & Co. recalls the name under which the Robbins partnership bought the factory in 1857. The company also engraved private names for retailers who bought in bulk, so a jeweller's name on a dial means only that the watch passed through his shop.
From the White House to a bank lobby
In 1864 Lincoln's cousin Dennis Hanks came to Washington to plead for men imprisoned after a riot in Charleston, Illinois, and told the president that thieves had stolen his watch on the way. In Hanks's own account, sworn in an affidavit of May 1891, Lincoln took the silver watch from his desk and gave it to him. The watch passed to a Chicago collector, Charles F. Gunther, for $500 in 1892, and was shown at the Columbian Exposition in Chicago in 1893. When the collection of a later owner, Oliver R. Barrett, was sold in February 1952, the Waltham company bought its most famous watch back for $1,600. By February 1959 it belonged to Roy P. Crocker, president of the Lincoln Savings & Loan in Los Angeles, who displayed it in the lobby. In March 1977 thieves broke the display case from below and took it. It has not been seen since.
The watch Lincoln gave his cousin after a theft was itself stolen, from a bank lobby in Los Angeles, in March 1977.
Two stories about the watch need care. The first, that it was presented to Lincoln after the Gettysburg Address of November 1863, appears in the company's own history, but the movement was made in January of that year and the case bears no presentation inscription, so the claim is unlikely. The second, that the watch is now in the Smithsonian, is simply wrong; the Lincoln watch in the national collection is a gold watch made in Europe, not this William Ellery.
Railroad time
After the Civil War Waltham became a leading maker of watches for railways in North America and abroad. Railways were the first great users of standard time, and a conductor whose watch was a minute slow could put two trains on the same stretch of line. Watches were the safety system.
The standards of 1887 and 1891
In 1887 the American Railway Association held a meeting that produced a broadly standard set of requirements for railway watches, though not every line adopted them. After a crash on the Lake Shore and Michigan Southern Railway in 1891, the line brought in Webb C. Ball as time inspector, and his rules spread until he oversaw timekeeping on more than half the railways in the United States. The requirements that grew from them called for 16 or 18-size movements, open faces with the crown at twelve, at least 17 jewels after 1895, adjustment to five positions, a variation of no more than 30 seconds a week, and, after 1908, lever setting so that the hands could not be moved by accident.
Crescent Street and the Vanguard
The factory stood on Crescent Street, next to the Charles River, and the company used the street's name as a grade on several models. On the Model 1870 it was the first Waltham advertised as a railroad watch. In 1894, in a period of fierce competition and difficult finances, the company introduced the Vanguard movement, the first of what became known as the Model 1892; on that model Crescent Street ranked second to the Vanguard and came in 17, 19 and 21-jewel versions. Vanguard and Crescent Street are the two Waltham names a railway collector looks for first; the rival from Lancaster, Pennsylvania, whose watches railways bought in quantity, is the subject of our Hamilton chapter.
The up-and-down indicator
The company's own history credits the Vanguard with the first up-and-down indicator on the dial, a small hand showing how much power is left in the mainspring, and says that railways in 52 countries used Waltham watches. The claim to have been first is the company's own, and we have not been able to test it. The wider world of these watches, from railroad grades to repeaters, is set out in our guide to pocket watches.
After 1895 a railroad watch needed at least 17 jewels and could drift no more than 30 seconds in a week.
Trenches, cockpits and the A-11
From the First World War onwards the company's precision work went increasingly to the armed forces, and the military pieces are now among the most collected Waltham wristwatches. They also show how a pocket-watch maker learned to make watches for the wrist.
Trench watches and the Field & Marine
During the First World War American makers including Waltham and Elgin supplied watches to United States forces. Many trench watches had black enamel dials, radium-painted numerals and hands, nickel or silver cases and onion crowns, and some were stamped ORD for ordnance when they were handed back after the war. In 1918, the company says, a case maker named Charles Depollier fitted Waltham movements into a waterproof case with a patented screw-down crown, the Field & Marine, which passed a 500-hour submersion test for the War Department; the pilot Roland Rohlfs wore one that year when he set an altitude record of 34,610 feet. An original Field & Marine entered the International Museum of Horology at La Chaux-de-Fonds in 1998.
Lindbergh's clock
The company also made aircraft clocks. Its account of the XA Type 37 places one on the instrument panel of Charles Lindbergh's Spirit of St. Louis for the first non-stop flight from New York to Paris in May 1927, and another in Charles Kingsford Smith's Southern Cross for the first flight across the Pacific in 1928. The First World War had already drawn the company into new trades: artillery time fuses from 1915, car speedometers from 1916 and blood-pressure gauges from 1917.
The A-11
In the Second World War the Massachusetts factory turned entirely to military work, making watches for servicemen and timing devices for bombs and torpedoes. The best-known product was the A-11, a hacking wristwatch with a black dial and white markings made by three American companies, Elgin, Waltham and Bulova, in tens of thousands; it also served with the Royal Air Force. Our Bulova chapter follows the A-11's other maker into the electronic age.
The A-17 and the A-13A
On 31 December 1948 Colonel J. C. Harvell of the United States Air Force wrote to Waltham asking for comments on specification 21277 for a new navigation watch. The specification became MIL-W-6433, approved on 23 March 1951, and the Air Force chose Waltham alone to make the Type A-17, a hacking pilot's watch with a 24-hour inner scale. The company says that on 27 September 1956 Captain Milburn Apt wore an issued A-17 when he became the first pilot to pass Mach 3, in the Bell X-2. Waltham Precision Instruments also made the A-13A aircraft clock fitted to American military aircraft during the Cold War.
The Air Force chose one maker for the A-17, and that maker was Waltham.
The long decline, 1920 to 1957
The First World War made Waltham rich and careless. Sales nearly doubled between 1915 and 1918, but when the depression of 1920 and 1921 arrived, the company was carrying habits it could not afford.
Twenty-five workshops under one roof
Consultants called in by management found 25 rival departments, each foreman running his own as if it were a separate plant, and estimated that 4,000 people were doing work that 2,000 could do. Unsold inventory had grown to $11 million and debt to $8 million. Late in 1921 the First National Bank of Boston and other creditors took control and installed Gifford K. Simonds, a sawmill manager from Fitchburg, as chief executive. In 1923 a syndicate led by Kidder, Peabody & Co. reorganised the company, small shareholders lost three-quarters of their equity, and Frederic Dumaine took charge from February 1923.
From pocket to wrist
Dumaine's most important decision was to turn the factory from elegant pocket watches, which post-war customers no longer wanted, towards smaller wristwatches for a wider market. It was a risk: two-thirds of the plant had stood idle in 1922, the company lacked designers and toolmakers for the new work, and imports from Switzerland had grown nearly fivefold between 1913 and 1920. He also cut prices from 15 to 25 per cent above those of Elgin and Hamilton to about 5 per cent above them.
The strike of 1924
A general wage cut brought the company's first strike in more than seventy years. On 11 August 1924, 75 men in the finishing department put down their tools; within three days 2,000 of the 2,900 employees were out, and a parade of about 2,000 people, some with fifty years of service, marched through the town. The company kept going with new hires, and the strike dragged on to the end of the year.
Shutdown, Swiss movements and tariffs
After the Second World War, a net profit of $211,200 in 1945 turned into a loss of $411,400 in 1946, and a flood of lower-priced Swiss watches was blamed. The company filed for bankruptcy in 1949, and on 3 February 1950 the factory closed, putting 1,200 people out of work. A trustee restarted it in September 1950 to finish 242,000 watches for Christmas, and in 1951 the company made a small profit of $11,728, its first since the war. In March 1952 it announced that it would import complete movements from Switzerland, since that cost less than making them, and its rivals Elgin and Hamilton did the same. A higher tariff on imported jewelled watches followed, but in 1954 sales fell by more than 35 per cent.
On 3 February 1950 the factory on the Charles closed, and 1,200 people lost their jobs.
A name with many owners, 1955 to 2011
From the mid-1950s the history of Waltham becomes the history of a name. The factory and the trademark went separate ways, and the trademark itself split by territory.
Bellanca, Axler and Chicago
In July 1955 control passed to the Bellanca Aircraft Corporation, part of the holdings of the financier Sydney Albert, which wanted the instrument business rather than the watches. In the autumn of 1956 a group led by the watch distributor Joseph Axler took working control, and in July 1957 shareholders renamed the company Waltham Precision Instruments, keeping aircraft clocks and gyroscopes in Massachusetts. In January 1958 the Hallmark Watch Company of Chicago agreed to assemble watches from imported parts under the Waltham name, and in 1959 the name was sold outright to Hallmark's president, Harold B. Aronson. The Chicago company sold through franchised display cases in drugstores and hardware shops, opened a factory at Neuchâtel in the summer of 1962 designed to make up to 100,000 movements a month, and spent much of the 1960s under scrutiny from federal regulators over its jewel counts, inflated price tags and claims of origin.
Invicta and the SGT years
In 1968 a Swiss group led by the Invicta Watch Company of La Chaux-de-Fonds bought Waltham, and Invicta's president Georges Didisheim became chairman. In the 1970s Waltham joined the Société des Garde-Temps, a federation of Swiss makers of inexpensive watches, and its sales doubled to more than a million watches a year; by 1975 it was the third-largest watch brand in America, behind Timex and Bulova. Our Timex chapter tells the story of the company that led that table. In January 1974 the federation also bought the rights to the Elgin name, but the quartz crisis ended its watch business in 1981, and the rights to its brands were sold one by one.
The Swiss company of 1954 and the aircraft clocks
Before the American company lost its watches, it had founded a Swiss subsidiary in 1954, Waltham International SA, which held the right to the name outside North America. That company is the ancestor of today's Swiss house. The last product made in the old tradition, the mechanical aircraft clock, was bought by Prime Time Clocks in February 1994 and moved to Ozark, Alabama. The company's records from 1854 to 1929, in 52 archive boxes and 111 linear feet of shelving, are kept at the Baker Library of Harvard Business School.
By 1975 the old Massachusetts name was the third-largest watch brand in America, sold from Chicago with Swiss movements.
Waltham and Japan
Waltham's Japanese story runs in two long chapters a century apart. In the first, American pocket watches arrived with the Meiji modernisation and set the standard for the railways. In the second, a Tokyo importer owned the name for three decades and turned it into a jewellery-counter brand.
The railway watch of 1897
In the first years of the Japanese railways, a pocket watch was far beyond the means of most drivers and conductors, who carried something closer to a small alarm clock. Waltham railway watches were used by railway officials from the early years, and a rule on lending watches to staff, made in 1893, required station masters, conductors and drivers to carry one. On 1 August 1897 the Railway Operations Bureau was set up as an external bureau of the Ministry of Communications, and it adopted Waltham pocket watches as Japan's first official standard railway watch, chosen after weighing accuracy, robustness, portability and legibility.
Waltham kept that place until 1929, when the first Japanese-made standard railway watch was adopted: the 19-type pocket watch from Seikosha, the Hattori factory whose story begins in our history of Ginza and the watch. The pocket form outlived the mechanism; in 1978 the railway watch switched from hand-wound to quartz movements while keeping its pocket-watch case.
From 1897 until 1929, the standard watch of the Japanese railways was a Waltham.
"The Best", in Japanese
The Charles River Museum holds a family of more than 140 hand-painted glass slides of Waltham advertising from about 1900 to 1910, made for a campaign titled American Waltham Watches Go All Over The World. Many carry Japanese motifs, and one carries a long Japanese text with the Waltham eagle. In the museum's translation it reads: the Waltham watch you own is clearly stamped on the back with the words The Best, and behind this guarantee, assured in perpetuity, stands the world's largest factory. American pocket watches were among the first consumer goods sold in Japan after the Meiji Restoration, and Japanese makers answered with imitation: domestic pocket watches climbed into gold and silver versions of a model called the Excellent, a copy of the American Waltham.
Heiwado and the Vacuum
The second chapter began in April 1952, when Heiwado & Co. was founded as an importer of watches and jewellery; it became a company in October 1956 and later had its head office at Hamamatsucho in Minato, Tokyo. It has no connection with the Shiga supermarket group of the same name. Heiwado sold through concessions in department stores and through its own exhibitions, and made its names famous through television: it supplied Swiss Technos watches as quiz-show prizes and, until 2003, gave a Waltham to the winner of the fighting-spirit award in professional baseball's Japan Series.
The company's own history says that Waltham entered the Asian market at the end of the 1970s with the Vacuum, a mechanical wristwatch built to run without air inside the case, and that after Heiwado bought the name in 1981 Waltham quickly became the most popular watch brand in Japan. The timing fits: a Swiss mark for WALTHAM VACUUM, held by Waltham International SA of Marin-Epagnier near Neuchâtel, carries the date 29 December 1981. In 2000 the house marked its Asian success with the Radiant 2000, set with more than 150 carats of diamonds. Heiwado's watch list also included Century, the Swiss sapphire-case brand, and its jewellery list a Waltham Jewellery line alongside Queen, its largest name.
The fall of Heiwado
Heiwado's sales peaked in the year to September 1996. After the bubble economy burst the market for fine jewellery shrank, foreign houses set up their own Japanese subsidiaries, and many of Heiwado's staff were recruited away by them. By the year to September 2015 sales were about a tenth of the peak, after five years of losses, and attendance at its 2016 exhibition collapsed. No sponsor could be found. On 3 October 2016 the company filed for bankruptcy at the Tokyo District Court, and a director said that it had been unable to change its dependence on department stores, or to reach beyond a clientele of elderly regulars. The company ceased to exist as a legal entity on 25 June 2018.
A director said the company could not change its dependence on department stores, or reach beyond its elderly regulars.
Waltham today
By the time Heiwado failed, the Swiss company had already changed hands. In 2011 a majority of Waltham International SA was sold to Antonio DiBenedetto, an Italian-American businessman who became its chief executive and president, and the house now trades as Waltham Watch Company SA.
AeroNaval
The relaunch, announced in June 2015, leaned on aviation. The AeroNaval XA took its small seconds at twelve from the clock in Lindbergh's aircraft, the CDI added a central civil date indicator modelled on wartime aircraft instruments, and the ETC offered a central elapsed-time chronograph after the A-13A, each in titanium. The movements were Swiss automatics fitted with modules from Dubois Dépraz.
Field & Marine and the A17
In 2021 the company brought back the Field & Marine of 1918, with a reworked bayonet crown and water resistance of 300 metres, issued with the backing of a collectors' community; a special edition followed in 2022. In 2023 it reissued the A17 to the MIL-W-6433 standard in a larger size. In North America the Waltham name has had a separate history since the 1950s, and accounts of who holds it now differ.
For a collector in Japan, the result is three distinct families with one name: American pocket watches and early wristwatches made in Waltham up to the 1950s; Swiss-made watches of the Chicago, Invicta and Heiwado decades; and the Swiss house's own watches since 2011. They are valued and serviced in very different ways. The American pieces belong with the great American houses; the Japanese-market pieces of the 1980s and 1990s sit closer to the Ginza importers' world, alongside the Technos and Century watches that Heiwado sold beside them.
Timeline
| Year | Event |
|---|---|
| 1812 | Aaron Lufkin Dennison born in Freeport, Maine |
| 1849–1850 | Dennison and Edward Howard, with David P. Davis and Samuel Curtis, found the American Horologe Company in Roxbury |
| 1853 | Renamed Boston Watch Company |
| 1854 | Factory opens in Waltham with 90 workers |
| 1857 | Foreclosure; Royal E. Robbins buys the property for $56,000 |
| 1858 | American Watch Company incorporated |
| 1863 | William Ellery movement 67613, later Lincoln's watch, made in January |
| 1871 | Charles Vander Woerd's automatic screw machine |
| 1876 | Gold medal at the Philadelphia Centennial Exhibition; Jacques David's visit |
| 1885 | Renamed American Waltham Watch Company |
| 1894 | Vanguard movement introduced, the first Model 1892 |
| 1897 | Japan's Railway Operations Bureau adopts Waltham as its first standard railway watch |
| 1907 | Renamed Waltham Watch Company |
| 1915–1917 | Artillery fuses, speedometers and blood-pressure gauges |
| 1918 | Field & Marine waterproof watch, in the company's account |
| 1923 | Reorganisation under Kidder, Peabody; Frederic Dumaine takes charge |
| 1924 | First strike in the company's history, from 11 August |
| 1927 | XA Type 37 clock aboard the Spirit of St. Louis, in the company's account |
| 1929 | Seikosha 19-type replaces Waltham as Japan's standard railway watch |
| 1942 | A-11 production for the armed forces |
| 1950 | Factory closes on 3 February; partial restart in September |
| 1951 | MIL-W-6433 approved for the Waltham A-17 on 23 March |
| 1952 | Imports of Swiss movements announced in March |
| 1954 | Waltham International SA founded in Switzerland |
| 1957 | Renamed Waltham Precision Instruments |
| 1958–1959 | Hallmark Watch Company of Chicago licenses, then buys, the name |
| 1962 | Neuchâtel movement factory opens |
| 1968 | Iseca group led by Invicta buys Waltham |
| 1975 | Third-largest watch brand in America |
| 1981 | SGT ends; Heiwado & Co. of Tokyo acquires the name; WALTHAM VACUUM mark dated 29 December |
| 1994 | Aircraft clock line moves to Ozark, Alabama |
| 2000 | Radiant 2000 diamond watch |
| 2011 | Antonio DiBenedetto buys a majority of Waltham International SA |
| 2016 | Heiwado files for bankruptcy on 3 October |
| 2021 | Field & Marine reissued |
| 2023 | A17 reissued to MIL-W-6433 |
What turns up in Japan
In October 2026 we read the first 100 of about 425 Waltham watches offered in Japan in a single sweep, and sorted them by form, line, movement and condition. The shelf is not what the history suggests: wristwatches outnumber pocket watches almost five to one, and the commonest line names are not American railroad grades but the dress watches of the Tokyo years.
Our October 2026 sweep, 100 pieces
| Group | Pieces | Notes |
|---|---|---|
| Wristwatches | 72 | Men's and ladies' |
| Pocket watches | 15 | One hunter case, three in sterling silver, three dated before 1930 |
| Maxim | 24 | Including Maxim VIP, Cutomatic Maxim, Lady Maxim and Maximus |
| Maxine | 5 | Sold beside Maxim, often as ladies' pieces |
| Dynax | 7 | Two with hard-metal cases |
| Other named lines | 8 | Americana 2, and one each of Riverside, Premier, Phelps & Perry, De Luxe Alarm and Rollmatic |
| Hand-wound | 44 | The largest group |
| Quartz | 34 | The second-largest group |
| Automatic | 10 | Rollmatic among them |
| Gold filled or plated | 7 | One 18-carat white gold ladies' quartz |
| Ladies' and men's | 23 and 29 | Where the title said so |
| Working stated | 34 | Against 18 sold as not running |
Three patterns stand out. First, Maxim alone accounted for 24 pieces, more than all the pocket watches together, which tells you where the Japanese shelf comes from: the decades when the name was sold through Tokyo department stores. Second, hand-wound movements still lead, at 44 pieces against 34 quartz, so a mechanical Waltham wristwatch is easy to find in Japan. Third, nearly a fifth of the pieces were sold as not running, which is why the movement photograph matters more here than with most brands; our guide to Japanese condition ranks explains how those words are graded. The many hand-wound Swiss pieces of the Tokyo era belong to the same era of mechanical dress watches that our King Seiko and Grand Seiko chapter describes from the Japanese side.
Reading a Waltham
Every Waltham is placed by three things: the serial number, the model and the grade. On an American pocket watch all three are on the movement; on a later wristwatch the case, dial and calibre do the work instead.
The serial number
Every movement the company made in Massachusetts until the early 1950s carries an individual serial number, and that number dates the movement closely. Volunteers have built databases of serial numbers, models and grades, so the first step with any American Waltham is to open the back, note the number and look it up. A movement numbered 7007396, for example, belongs to the first run of Crescent Street grades on the Model 1892.
Model and size
The model, such as the Model 1857, Model 1883 or Model 1892, describes the design of the movement: plates, bridges and gear train. The size, 18, 16, 12 and smaller, describes its diameter in an old American scale. Railway watches are 16 or 18-size, open-faced, with the crown at twelve.
The grade
The grade marks the variations within a model, usually the number of jewels and the quality of finish. Waltham used both named grades, such as Appleton, Tracy & Co., William Ellery and Vanguard, and numbered ones, such as 992 or No. 81, and used the same names on different models, where they do not always mean the same rank. On the Model 1892, Vanguard is the top grade and Crescent Street second.
| Grade or line | Era | What it usually means |
|---|---|---|
| William Ellery | From the Civil War | The inexpensive seven-jewel grade, 45 per cent of sales by 1865 |
| Appleton, Tracy & Co. | From 1857 | A better grade named after the firm that bought the factory |
| Crescent Street | Model 1870 onwards | The first Waltham advertised as a railroad watch; second to the Vanguard on the Model 1892 |
| Vanguard | From 1894 | The top railroad grade, up to 23 jewels |
| Riverside and Premier | Pocket watches | Better American grades; one of each in our sweep |
| A-11, A-17 | 1940s and 1950s | Military hacking wristwatches |
| Maxim, Maxine, Dynax | Japanese shelf, Tokyo years | Wristwatch names common in Japan; read the dial and movement for origin |
Private labels
A name other than Waltham on a dial or movement does not make a watch a copy. For an extra charge the factory engraved the names of retailers who bought in bulk, and those private-label or jobber watches are ordinary Waltham grades with a name added.
Where the records disagree
A company that changed its name six times and its owners a dozen times leaves contradictions behind. These are the ones that matter to a buyer, with our best reading of each.
| Question | One account | Another account | Our reading |
|---|---|---|---|
| How Lincoln got his watch | Given to him after the Gettysburg Address of November 1863 | Movement made in January 1863, no presentation inscription, acquisition unknown | Owned during the war; the Gettysburg story is unlikely |
| Where Lincoln's watch is | In the Smithsonian collection | Stolen from a bank lobby in Los Angeles in March 1977 | Missing since 1977 |
| Date of the Vanguard | 1870, as the first railroad watch with an up-and-down indicator | 1894, introduced as the first Model 1892 | Crescent Street was the railroad grade of 1870; the Vanguard dates from 1894 |
| The second Roxbury watch | A 36-hour power reserve | A 30-hour watch designed by N. P. Stratton | A day-and-a-half watch; the exact figure varies by account |
| When Dennison left Waltham | Dismissed by Robbins in 1861 | Superintendent until 1862 | 1861 or 1862; both accounts agree he was pushed out |
| Peak workforce | Over 3,000 at the height of production | Over 4,000, and 4,000 found by consultants in 1921 | About 4,000 at the peak around 1920 |
| The Apollo 15 backup watch | A Waltham, used after the commander's Speedmaster failed | A Bulova chronograph, as the astronaut himself corrected in 2014 | Bulova |
| Present owner in Japan | A wholly owned subsidiary of Heiwado | Heiwado bankrupt in 2016; Swiss company majority-owned by Antonio DiBenedetto since 2011 | No Japanese owner today |
| North American rights | Held by a separate American company | Recovered by the current Swiss owner, in a collectors' forum account | Unsettled; check the maker of any modern piece sold in North America |
| Heiwado's debts in 2016 | One credit agency's figure | A second agency's figure, higher by more than a tenth | Large either way; not material to a buyer |
Two stories told in Japan remain unconfirmed: that the novelist Kawabata Yasunari wore a Waltham, and that President James Buchanan sent a Waltham to Emperor Kōmei as a token of friendship. Neither carries a reference we could check, and the second would have to date from the company's first, near-bankrupt years. We treat both as unproven.
The backup watch on the Moon in 1971 was a Bulova; the astronaut corrected his own memory in 2014.
A sceptic's view
The case against Waltham as a modern brand is easy to make. The American factory closed for good in the 1950s, and every Waltham wristwatch made since then has used movements from somewhere else, first Switzerland through Chicago and Neuchâtel, then the low-cost federation of the 1970s, then a Tokyo importer that sold through department stores. The name has been licensed, divided and sold so often that the dial alone tells you almost nothing about the quality of what is behind it.
The case for it is strong, but specific. A Waltham pocket watch from the Massachusetts years is one of the best-documented mechanical objects a collector can own, dated by serial number and placed by grade, and the railroad and military pieces carry real history. The hand-wound Swiss pieces of the later decades are honest, serviceable watches, and the reissued Field & Marine and A17 are serious modern watches that take their history seriously. The trick is never to pay for the Massachusetts story on a watch that does not belong to it, a rule that applies equally to every American name in our survey of collectible watches.
Never pay for the Massachusetts story on a watch that does not belong to it.
Before you buy
These are the checks we make on any Waltham before it leaves Tokyo, in the order that saves the most trouble.
Decide which Waltham it is
Open the back. An American movement with a serial number, a grade name and Waltham, Mass. engraved on the plate belongs to the factory years. A Swiss calibre with Swiss Made on the dial belongs to the later decades. A modern piece from the Swiss house will carry its own reference and papers.
Look up the serial number
On an American movement, record the serial number and check the model, grade, jewel count and year against a serial database. A movement whose number does not match its grade or jewel count has probably been swapped into the case, which is common with pocket watches.
Check the case against the movement
Pocket watch cases were usually made separately, often by other firms, so a Waltham movement in a gold-filled or silver case of another maker is normal. What matters is that the case fits, closes cleanly and does not carry a forged hallmark or a karat stamp that does not match the metal.
Look for railroad features
A railroad watch should be open-faced, 16 or 18-size, with the crown at twelve, lever setting and at least 17 jewels. A hunter case or pendant setting on a watch described as a railroad grade means the description needs checking.
Treat military pieces with care
A-11 and A-17 watches are widely redialled and rebuilt. Check the caseback markings, the hacking function and the dial lume, and treat a perfect dial on a wartime watch as a reason to ask questions.
Ask for the movement photograph
With almost a fifth of the Japanese shelf sold as not running, a photograph of the movement tells you more than a description. Rust, missing screws or a broken balance turn a hand-wound watch into a parts piece.
Value the box and papers fairly
Heiwado-era pieces sometimes come with Japanese warranty cards and boxes, which help to date them. A full set is welcome but, as our note on full sets explains, it adds less on a dress watch than on a modern Swiss house. Pieces kept in their boxes in Japanese drawers often survive in fine order, as described in our essay on how Japan cares for its watches.
FAQ
Is Waltham an American or a Swiss brand?
Both, at different times. It was founded in Massachusetts in 1850 and made watches there until the 1950s. A Swiss subsidiary founded in 1954 carried the name abroad, and today's Waltham Watch Company SA is a Swiss company.
How do I date a Waltham pocket watch?
By the serial number engraved on the movement. Serial databases built by collectors give the model, grade and year of manufacture for movements made in Massachusetts.
What does Vanguard mean on a Waltham?
It is the top railroad grade, introduced in 1894 on the Model 1892, made with up to 23 jewels. Crescent Street was the grade just below it.
Did Abraham Lincoln own a Waltham?
Yes. He owned a William Ellery grade, movement 67613, made in January 1863, and gave it to his cousin Dennis Hanks in 1864. It was stolen from a display in Los Angeles in 1977 and has not been found.
What was Waltham's link with Japan?
Japan's Railway Operations Bureau adopted Waltham pocket watches as its first standard railway watch in 1897, and from 1981 the Tokyo importer Heiwado & Co. owned the Waltham name, until it failed in 2016.
What is a Waltham Maxim?
Maxim is the line name most often seen on Waltham wristwatches in Japan, in men's and ladies' versions and with hand-wound, automatic and quartz movements. In our October 2026 sweep it accounted for 24 of 100 pieces.
Who owns Waltham now?
Waltham Watch Company SA in Switzerland, majority-owned by Antonio DiBenedetto since 2011. The rights in North America have followed a separate path since the 1950s.
Did a Waltham go to the Moon?
No. The backup watch worn on Apollo 15 was long said to be a Waltham, but the astronaut David Scott confirmed in 2014 that it was a Bulova chronograph.
Finding one
A Waltham is easiest to judge when you know which of its three lives you are looking at. Decide first whether you want an American pocket watch from the factory years, a Swiss-made wristwatch from the Tokyo decades or a modern piece from the Swiss house, then read the serial number or the calibre, then the condition. The Japanese shelf is deepest for hand-wound and quartz wristwatches of the Maxim family and thinner for railroad grades. For the shops where such pieces surface, see our collector's atlas of Tokyo; for how a piece travels from Japan to you, see our guide to otoriyose. Before a piece leaves Tokyo we open the back, record the serial number or calibre and photograph the movement, so that what arrives is the watch you chose. The current selection is on our collectible watches shelf.
Two neighbours complete the picture. Our guide to vintage Citizen follows the other great Japanese maker of the twentieth century, and the Seiko Astron of 1969 marks the quartz turn that ended the federation that owned Waltham in the 1970s.
Further reading
- The Watch Almanac, for where Waltham sits at the root of the American houses.
- Pocket watches, for the railroad standards Waltham helped to set.
- Hamilton watches, for the great railroad rival from Lancaster.
- Longines, for the Swiss house whose future director studied Waltham in 1876.
- Technos, for the other Swiss name Heiwado made famous in Japan.
- Japanese condition ranks, for reading a description from Japan.
- Japanese wall clocks, from the bonbon clock to Seikosha, for how Meiji Nagoya and Seikosha learned to make the pendulum clock
References
- Waltham Watch Company (encyclopaedia entry)
- Waltham Model 1857 (encyclopaedia entry)
- Aaron Lufkin Dennison (encyclopaedia entry)
- Railroad chronometer (encyclopaedia entry)
- IWC Schaffhausen (encyclopaedia entry)
- Hamilton Watch Company (encyclopaedia entry)
- Waltham (Japanese encyclopaedia entry)
- Heiwado Trading (Japanese encyclopaedia entry)
- Waltham Watch Company SA: brand history
- Waltham Watch Company SA: the American system of watchmaking
- Waltham Watch Company SA: the birth of a legend, the USAF A-17 contract
- Waltham Watch Company SA: the military 24-hour clock system
- Waltham Watch Company SA: current collections
- Worn & Wound: military watches of the world, United States part 1
- Worn & Wound: the A-11, the watch that won the war
- Waltham Model 1892 database: 23-jewel Vanguard
- Waltham Model 1892 database: Crescent Street grade
- Barry Goldberg: guide to Waltham grades
- Richard Watkins: Jacques David and American watchmaking, introduction
- Waltham Watch Factory: history
- National Park Service: American Waltham Watch Company complex, National Register nomination (PDF)
- Jacques David: American and Swiss watchmaking in 1876, full translation (PDF)
- The American: keeping time with Lincoln
- Teikoku Databank: Heiwado & Co. bankruptcy report, October 2016
- Nikkei Business: an old jewellery house that failed to pass to a new generation, 2016
- Hodinkee: five American watchmakers you should know
- Smithsonian Institution: American Watch Company prototype
- Master Horologer: Waltham watches
- Master Horologer: new Waltham models
- Centurion news: Waltham is back
- Shiino Goichi: the Waltham pocket watch adopted by the Railway Operations Bureau
- Tokei Begin: the pocket watch every Japanese train driver carries
- National Diet Library: what the railway changed, chapter 1, the sense of time
- Charles River Museum: American Waltham watches, June 2026
- Charles River Museum: virtual tour of the Waltham watch collection
- Swiss trademark register: Waltham International SA
- Swiss trademark register: WALTHAM INTERNATIONAL
- NAWCC message board: Waltham watches from Switzerland
- collectSPACE: Apollo 15 moon watch was a Bulova, 2015
- Fratello: questions and answers with Apollo 15 astronaut Dave Scott
- Video: Charles River Museum, the Waltham Watch Company automatic screw machine (official channel)