Ball Watch: The Railroad Standard, Micro Gas Lights, Calibre 7309 and Japan

Ball watches: the short answer

Ball is a Swiss watch brand built on an American name. Webb C. Ball, a Cleveland jeweller, wrote the timekeeping rules adopted by most North American railroads after a fatal collision at Kipton, Ohio, in 1891, and ran an inspection service that checked the watches of railway workers. Watches signed Ball, with movements made to his specification by the big American factories, were carried on the footplate for decades. The modern company, revived around the turn of the millennium and based in La Chaux-de-Fonds since 2011, makes Swiss mechanical watches for hard use, nearly all of them lit by tiny tubes of tritium gas.

Our Watch Almanac places Ball among the American names that crossed to Switzerland, and the railroad thread runs straight through our guide to pocket watches, railroad watches and repeaters. The two halves of the Ball story are different objects: a vintage pocket watch made in an American factory, and a modern Swiss tool watch. A collector should decide early which of the two they want.

Identification

On a vintage pocket watch, look for the Ball name on the dial and the movement, the words Official RR Standard, an open face with the crown at twelve, bold Arabic numerals and a grade number such as 999 on the movement. On a modern wristwatch, look for the small glowing tubes on the hands and markers, the letters RR in the counterweight of the seconds hand, and a reference beginning with letters such as NM, DM, DC or GM on the caseback.

Who it suits

The pocket watches suit a collector of American horology who wants a working object with a documented role in railroad safety. The modern watches suit a buyer who wants a robust mechanical watch that can be read in total darkness without charging the lume, and who values shock and magnetic resistance over finishing for its own sake.

Webb C. Ball, the jeweller who became a time inspector

Webster Clay Ball was born on 6 October on a farm in Knox County, Ohio, near Fredericktown; the year is given as 1846 in the standard Cleveland reference and as 1847 in the company's own timeline. He began a jewellery apprenticeship in Fredericktown in 1869, joined the Deuber Watch Case Company of Cincinnati in 1874 and moved to Cleveland in 1879, where he took a share in the jewellers Whitcomb and Metten. Within two years the firm carried his name as the Webb C. Ball Company.

Ball was a retailer and a regulator of watches, a man who knew how to make a watch keep time and how to test it. That expertise is why a railroad turned to him. It also explains the shape of the company that followed: Ball did not run a watch factory. He specified, tested, signed and sold watches made by others, and he built a service that checked them in use.

Honours and the end of his life

For his work on railroad timekeeping Ball was elected an honorary member of the Brotherhood of Locomotive Engineers at its convention in Cleveland in 1921, and the company timeline adds an honour from the Horological Institute of America the same year. He is also reported to have served as a vice president of the Hamilton Watch Company, the Pennsylvania factory that built many of his finest movements. He died at home in Cleveland Heights on 6 March 1922, survived by his wife Florence, his son Sidney and three daughters.

The Kipton wreck, April 1891

Kipton is a small station about forty miles west of Cleveland on what was then the Lake Shore and Michigan Southern Railway. In April 1891 an eastbound fast mail train ran at speed into the Toledo Express, which was approaching the point where it would normally pull into a siding to let the mail pass. The locomotives were wrecked, the wooden mail cars were telescoped and smashed, and the dead included six railway mail clerks, all from Ohio.

The investigation found the crew of the Toledo Express at fault: their train was running late and should not have set out for Kipton with the fast mail approaching on the same line. Attention turned to the engineer's watch, which, by the account that has come down to us, had stopped for about four minutes and then started again. Four minutes was enough for two trains to arrive at the same piece of track. The railroad's general superintendent appointed Webb Ball to investigate timekeeping on the line.

How much of the story is certain

Less than the legend suggests. The date is given as 18 April 1891 in most American tellings and as 19 April in the house's own history. The death toll is given as eight, nine or thirteen. Most of what is known about the circumstances comes from Ball's own recollections of 1910, almost two decades later, as the Japanese importer's history notes to its credit. The wreck is real and the four-minute watch is plausible, but the details of the founding story should be read as a story told by its hero.

The railroad standard

Ball's response was a specification for the watches railway workers could carry and a system for keeping those watches honest. The formal watch performance and inspection standards may date from 1893. Railroad standard time had been adopted in 1883, so the problem Ball addressed was less the clock on the wall than the watch in the pocket. His rules were adopted, line by line, across most of the network, and later inspired other chronometric standards.

Our Hamilton Ventura, Khaki and railroad guide follows one of the factories that built watches to rules of this kind. A watch that met the standard was a better watch, and the railroads became one of the most demanding customers in the American trade.

Ball time

In front of his Cleveland shop Ball installed a street clock set to the standard time of Washington, D.C. The phrase Ball time came to mean the correct time, in Cleveland first and then along the lines his inspectors served. It is the most durable piece of marketing the company ever had, and it was earned on the street.

The inspection system

A specification on paper does nothing unless someone checks it. Ball organised what became the Railroad Time and Watch Inspection Service, administered from his Cleveland shop. Local watchmakers were appointed as inspectors along each line. Engineers, conductors, firemen and brakemen carried a watch of an approved grade and presented it at set intervals; the inspector compared it against standard time, recorded its rate on a card, and regulated or replaced it if it had drifted beyond the limit.

How far it reached

The system spread from the Lake Shore line to most of the continent. By the account in the Cleveland reference, it eventually covered three quarters of the railroads in the United States and 125,000 miles of track; the Japanese importer's history gives 75 per cent of the network and more than 175,000 miles, and adds lines in Canada and Mexico. The company timeline says that by 1900 Ball had inspected the products of more than 54 makers and approved 37 watches for railroad use, and by 1908 his inspection system is said to have covered about 180 railroads and more than a million watches. Whatever the exact figures, the system was credited with saving hundreds of lives, and that is why the locomotive engineers' union honoured him.

How often a watch was checked

Here too the accounts differ. In the usual American telling, watches were compared every two weeks, and one more than 30 seconds out went for regulation. The Japanese history speaks of a compulsory full inspection twice a year. Both may be right for different lines and periods: a short comparison at the inspector's counter is a different act from a full service on the bench.

Who made the movements

The Ball name sat on movements built in the great American factories. Hamilton of Lancaster, Pennsylvania, made the largest share, and Waltham, Elgin, Hampden, Illinois, Aurora, E. Howard and Seth Thomas all built watches to the standard. Ball also approved Swiss makers for railroad service, among them Longines, Vacheron Constantin, Audemars Piguet and Record, and our Longines guide follows one of those Swiss houses. By the 1940s Ball wristwatches used Swiss movements from Avia.

What made a Ball different from the factory's own grade was the specification and the signature. Ball ordered movements finished and adjusted to his rules, signed them with his name, and in some grades added his own patented parts, such as a hairspring stud patented in 1908.

Serial numbers and dating

Ball movements carry their own serial runs, separate from the factory's, and published tables give approximate years for each run, from the early 1900s into the 1940s. A collector can date a watch to within a few years by its serial, then check that the grade, the jewel count and the dial match the period.

Cases and dials

Ball patented several case designs, of which the stirrup bow and the Ball model case are the most common, usually in gold fill. A correct railroad dial is single-sunk enamel with a seconds register at six and crisp Arabic numerals. Repainted dials are common, and a dial whose printing looks too thick or too even deserves a close look under raking light.

After the railroads

As the railroads changed, so did the company. The firm carried on in Cleveland as a retailer and distributor of railroad watches, and later as a wristwatch brand on Swiss movements. The company timeline gives 1962 for its first Skindiver, a diving watch launched as sport diving took off in the United States, and 1978 for the Trainmaster, an automatic wristwatch on a Swiss movement. Our guide to the Oris Divers Sixty-Five covers another house that later revived its dive watches of the same period.

The quartz years were hard on small American names, and by the 1980s the Ball name meant more to railroad collectors than to the wider public. The company timeline says it was acknowledged in 1980 as the longest-lived retailer of railroad-marked watches. Family ownership is said to have lasted until the 1990s, when the rights to the name were sold, although the paper trail for that last stretch is thin.

American names that crossed over

Ball is one of several American watch names that ended up Swiss. Our Bulova guide follows a New York house whose precision story took a different road, and the Hamilton guide follows the Lancaster name on its own way to Switzerland. In each case the name crossed the Atlantic and the factory did not.

The Swiss revival

The modern company has two founding stories. Francisco Herrera, a banker from El Salvador, is credited with gathering a group of investors in 1999 after he was moved by an old Ball watch with family meaning. Another date puts the purchase from the founder's family in 2000, by private investors who were mainly American and British. The company itself says it has operated since 1999.

The paper trail begins a little later. A company in Tortola, in the British Virgin Islands, registered a new Ball logo as a Swiss trademark on 21 August 2000 and a historic-style "Official RR Standard" logo in 2002. The earliest captured version of the brand's website dates from July 2001 and gives addresses in Lawrence, New York, and in Hong Kong. Ball Watch Company SA was founded in Geneva with statutes dated 15 October 2002 and entered in the commercial register on 25 October 2002. The watches first surface in the trade in the spring of 2003, and that, more than any earlier date, looks like the real launch.

Geneva, Neuchâtel, La Chaux-de-Fonds

The Geneva company began with a nominee administrator and was capitalised in 2005, when it moved to Neuchâtel under Ricardo Guadalupe, a watch executive who later ran Hublot. Kevin Kouch, a Canadian, took over in July 2006 and has led the company since. By 2007 it reported making 20,000 to 25,000 watches a year with a staff of fifteen. In 2011 it moved to La Chaux-de-Fonds, the watchmaking town of the Swiss Jura, where it is based today. In 2015, by one count, it had 5,031 movements certified as chronometers by the Swiss testing office.

Who owns it

The company is privately held and publishes no accounts. The trademarks have been registered in the name of an offshore holding company since 2000, and the brand gave a Hong Kong address from its first website onward. Beyond that, the ownership is not public, and a collector should treat any precise claim about it with caution.

Micro gas lights, the house signature

Every modern Ball is built around a light that needs no charging. Its hands and markers carry tiny sealed glass tubes, coated inside with a phosphor and filled with tritium, the radioactive isotope of hydrogen. The low-energy electrons from the gas excite the phosphor, and the tube glows steadily, day and night, whether or not it has seen light. The house calls them self-powered micro gas lights. The tubes are made in Switzerland by a specialist in tritium lighting.

The company's timeline claims a world first in 2001, with the Engineer collection, for a mechanical watch lit by micro gas tubes. Earlier models such as the Inspector used thin tubes of the kind fitted to instrument sights; later designs used clusters, flat tubes and tubes hidden under the dial to make shapes, from a glowing moon in a moon phase to the broad flat pads of the Engineer Hydrocarbon Original. Our Luminox guide covers the other brand best known for tritium tubes, and the two make an instructive pair.

How long the glow lasts

Tritium has a half-life of about twelve years, so the glow fades gradually. The Japanese importer says the tubes stay bright for more than ten years and then dim slowly without going dark at once; other accounts give up to twenty-five years of useful light. Both are consistent with the physics. A twenty-year-old Ball will still glow, more faintly than a new one, and the colours fade at different rates.

Tubes against luminous paint

Luminous paint is brighter for a short time after exposure to light, then fades within hours. Tritium tubes start dimmer and stay constant through the night. For reading a dial at four in the morning, the tube wins. For a photograph under a lamp, paint looks better. Many modern Ball watches use both, with paint on the bezel and tubes on the dial.

The military specification

The house says the United States military wrote self-powered gas tubes into its watch specification MIL-W-46374F in the 1990s. That specification dates from the 1960s and was revised several times, and its later revisions dealt with tritium markers and their radiation symbols. The point for a collector is narrower than the marketing: Ball did not invent the tube, it built a brand around it.

Engineering claims, read closely

Since 2013 the company has filed a run of patents, more than thirty by 2020, and its Japanese importer sets out the technical case in detail. The claims are specific, which makes them worth reading closely.

SpringLOCK and shock resistance

SpringLOCK, introduced in 2013, is a cage around the balance spring that limits how far the spring can move under a shock and helps it return to its position. The house says that where the international standard for shock-resistant watches allows a residual rate change of 60 seconds a day after a shock, SpringLOCK holds it to 20 seconds, cancelling about two thirds of the stress on the spring. SpringSEAL, unveiled in 2017, protects the regulator. Many Ball watches are rated to 7,500 times the force of gravity or more. Our G-Shock guide shows how a Japanese maker solved the same problem with resin and a floating module.

Calibre 7309, the first manufacture movement

The calibre 7309, introduced in 2017 in the Engineer M Challenger, is the company's first manufacture movement. It is automatic, beats at 28,800 vibrations an hour, runs for about 80 hours on a single barrel and is certified as a chronometer. The house is candid that some parts, such as wheels and the balance, are shared with a widely used third-party movement that has been in production for some forty years, to keep spare parts available. A silicon balance spring followed in 2021 in the RR7309-CS, and a true GMT version, the 7337, was finalised in 2022. Most Ball watches still use Swiss movements from outside makers, finished and certified to the house's specification.

Magnetic resistance

With a silicon balance spring and an escape wheel and lever made of nickel-phosphorus by the UV-LIGA process, the house rates its RR7309-CS at about 200,000 amperes per metre, or 2,500 gauss, without a soft-iron inner case. That allows a display back. Across the range the house quotes ratings from 80,000 to 200,000 amperes per metre, and its A-PROOF system adds a mu-metal diaphragm closed by turning the bezel. Our IWC guide follows the Ingenieur, the classic answer to the same problem.

904L steel and the Official Standard

The Engineer III Pioneer of 2018 was forged from 904L, a steel with more chromium, molybdenum, nickel and copper than the usual 316L, harder to machine and more resistant to corrosion; the Japanese importer dates the material's wider use from 2019. In 2023 the head office defined a BALL Official Standard, a house rate of minus two to plus four seconds a day, stricter than the chronometer certificate, as a modern echo of Webb Ball's rules.

Depth and the NEDU

In 2011 Ball presented an Engineer Hydrocarbon DeepQUEST tested to 3,000 metres. In 2012 came the Engineer Hydrocarbon NEDU, named for the United States Navy Experimental Diving Unit: a 42-millimetre chronograph, 17.3 millimetres thick, water resistant to 600 metres, with a black ceramic bezel and, as a world first, an automatic helium release valve built into the crown. Our vintage Seiko divers guide shows Japan's own path to the deep-sea watch.

In space

In 2010 the astronaut Alan Poindexter wore an Engineer Hydrocarbon Spacemaster aboard the Space Shuttle Discovery on its flight to the International Space Station. Our Speedmaster guide tells the story of the watch most associated with spaceflight; the Ball flight is a footnote by comparison, but a real one.

The collections at a glance

Ball also made a BALL for BMW line in the late 2000s and has issued many limited editions for small railroads, explorers and regional markets. Our Swiss Military Hanowa guide covers another Swiss brand that sells tool watches built to a written specification.

The Japan thread

Ball came to Japan with the revival. In the mid-2000s it was brought in by Montres Solmare, a Tokyo importer also known for the Alain Silberstein brand. At first few Japanese shops carried Ball; the importer advertised in the watch magazines, and by the end of 2007 the number of stocking shops had more than doubled. From January 2008 the brand set up its own company, Ball Watch Japan Co., Ltd., which took over import and after-sales service directly.

Ball Watch Japan, based in Chiyoda, Tokyo, runs the Japanese online boutique, handles repairs and maintenance through its own counter in Kojimachi, and publishes unusually detailed technical explanations of the brand, including candid notes on the founding story and on the shared parts in the manufacture movement. Its watches reach buyers through authorised retailers across the country. Our guide to Ginza and the watch explains the retail culture in which a brand like this has to make its name, among the department-store counters and specialist shops of central Tokyo.

Why Ball suits Japanese buyers

Three things make Ball an easy fit for Japan. The first is the railroad story: Japan is a country of precise trains, and a brand founded on punctual railways needs little explanation there. The second is the glow: in a city where many people commute before dawn and after dark, a dial that is always readable has an everyday use. The third is the engineering: Japanese watch buyers read specifications closely, and Ball's importer gives them plenty to read. Our Seiko divers guide and G-Shock guide show how high the domestic bar for a tough watch is set.

Japan-only editions

The importer issues Japan-only limited editions, often with distinctive dials or case materials. They carry a J in the reference suffix in several cases, and the best documented of them is the Blue Impulse pair described below. For any watch described as a Japan limited edition, the importer's warranty card and the engraved number on the caseback are the evidence that matters.

Papers and the Japanese card

A Ball first sold in Japan through the importer carries the brand's international warranty, handled by the importer, which also offers warranty extensions. A watch with box, booklets and its warranty card is easier to service and better documented, as our guide to the full set explains. Our note on how Japan keeps watches in the box explains why so many Japanese pieces still have theirs.

The Blue Impulse editions, 2024

In June 2024 Ball Watch Japan announced the Engineer Hydrocarbon Blue Impulse, a Japan-only edition marking the seventieth anniversary of the Japan Air Self-Defense Force. Blue Impulse is the force's aerobatic team, flying in a formation of six aircraft. The watch went on sale in July 2024 at authorised retailers and the online boutique, and buyers at the online boutique could choose their own number from 01/70 to 70/70.

Two versions, seventy each

There were two versions, each limited to seventy pieces: DC2278A-S-S1J-BK in grade 2 titanium with a steel-topped bezel, and DC2278A-C-S1J-BK in 316L steel with a black ceramic-topped bezel. Both are 42 millimetres across and 16.5 millimetres thick, water resistant to 300 metres with screw-down chronograph pushers, and rated to 7,500 times the force of gravity. The Blue Impulse emblem sits in the subdial at nine o'clock, the Air Self-Defense Force emblem is embossed on the caseback, and twenty-two micro gas lights are set on the hands and dial.

The movement

Inside is the Ball calibre RR1402, an automatic chronograph with 25 jewels, beating at 28,800 vibrations an hour with a 48-hour power reserve, recording up to twelve hours and showing the day and the date. It is one of the house's specification movements built on a Swiss base, and a reminder that the in-house 7309 is still the exception in the range.

Timeline

Video: how the micro gas lights work

The house's own short film on its self-powered micro gas lights explains the light that defines the brand. It is the quickest way to understand why every modern Ball is designed around those small glass tubes.

Where the records disagree

Ball's story has been retold for more than a century, much of it by the company. These are the points on which the records do not agree. We show them as conflicts and do not pick a winner where the evidence does not allow it.

The founder's birth

6 October 1846 in the Cleveland reference; 6 October 1847 in the company's timeline. The place is Knox County, near Fredericktown, in both.

The wreck

18 April 1891 in most American tellings; 19 April in the house's own history. The dead are given as eight, nine (six of them mail clerks) or thirteen. The faulty watch belonged to the engineer in some accounts and the conductor in others; it stopped for four minutes, or ran four minutes slow.

The appointment and the company

The house timeline dates Ball's appointment as chief time inspector to 18 July 1891; 19 July also appears. The company timeline dates the Webb C. Ball Watch Company to 1894, while the Webb C. Ball Company of Cleveland, the jewellery business, existed from about 1881.

The reach of the system

125,000 miles of track in one count; more than 175,000 miles in another. Both say about three quarters of American railroads.

The revival

1999 in the company's own claim; 2000 for the purchase from the family; 2002 for the Swiss company; 2003 for the first showing to the trade. The most defensible reading is a plan in 1999 and 2000, a company in 2002 and a product on the market in 2003.

The first in-house movement

The calibre 7309 of 2017 is the company's own answer. Earlier movements with RR names are sometimes described as in-house, but those are specification movements on Swiss bases, and we follow the house in treating the 7309 as the first manufacture calibre.

A sceptic's view

The strongest case against Ball is that the name is borrowed history. The modern company has no continuous line of production back to Cleveland. It bought a famous name, moved it to Switzerland and put a railroad story on the dial of watches made in the Jura. The RR on the seconds hand and the words Official Standard are a tribute to Webb Ball, and a buyer should read them that way.

The second case is about the movements. For most of its modern life Ball has used movements from outside makers, finished and certified to its own specification, and the in-house 7309 shares parts with a common third-party calibre by design. That is honest, and the importer says so, but it is a different thing from a watch built entirely in one workshop.

The third case is about the tubes. Tritium fades, and a watch whose whole personality is its glow will not glow forever. Replacing a tube is a job for the maker's own service. The counter-argument is that the fade is slow, predictable and disclosed, and that the light is the reason most people choose the brand.

Against all three, the modern company has done real engineering: a balance-spring cage, a regulator lock, a crown with a helium valve, a manufacture movement with an 80-hour reserve and a house rate stricter than the chronometer test. And the original Ball pocket watches are some of the finest American railroad watches ever made. The borrowed history is borrowed honestly enough that the Japanese importer prints the caveats on the founding legend itself.

Checks for collectors

For a vintage pocket watch

Check that the Ball signature, the grade and the serial number on the movement agree with each other and with the published serial tables, and that the dial is original. Ask for a clear photograph of the movement before anything else. A recent service by a watchmaker experienced with American railroad watches is worth more than a polished case. The collectible watches shelf shows the kind of documented pieces we look for.

For a modern wristwatch

Check that every tube glows and that the colours are even; a dead or mismatched tube points to damage or a replaced hand. Check that the crown protection system and any rotating bezel work cleanly, and that the reference and serial on the caseback match the warranty card. For an automatic, wind it and confirm that it runs for close to its rated reserve.

Condition grades from Japan

Watches from Japan are often graded on a scale that runs from unused through used grades A to C. Our guide to Japanese condition ranks explains what each grade means on a watch, and the authenticity guarantee page explains how we check a piece before it is offered.

Importing from Japan

Tritium tubes contain a small, sealed amount of radioactive gas, and watches with tubes are shipped worldwide every day as ordinary goods. Duties and taxes depend on the buyer's country, and our guide to import duties on goods from Japan explains how they are calculated. If you are looking for a particular Ball, such as a Japan-only edition or a Hamilton-made 999B, our Hunting Salon will search for it in Japan.

Frequently asked questions

Further reading

References

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.