How We Measure Japanese Furniture
Japanese Furniture · Sizes
Every Japonista listing gives width, depth and height. This page shows exactly where each figure is taken for each kind of piece, what is left out, and how to use the numbers to be sure a chest will reach the room you have in mind.
Chests, cabinets and other case furniture
- Where a moulding, cornice or other ornament projects, we measure to its furthest point.
- Projecting iron fittings, such as side carrying handles, pulls and lock plates, are not included.
Tables
- Where a moulding or ornament projects, we measure to its furthest point.
- Leg span is the inside measurement along the long side, from the inner face of one leg to the inner face of the other.
- For extending tables, we give the size both closed and fully extended.
- Where it matters for chairs or knees, we also give the clearance beneath the apron, or beneath the top.
Chairs
- Where a moulding or ornament projects, we measure to its furthest point.
Doors, sliding panels and architectural fittings
- Where tenons or pivots project from the frame, we measure to their furthest point.
- Depth (thickness) is of the door itself, without knobs, hinges or other hardware.
- Frame widths, stiles and rails, are measured separately on each of the four sides.
Beds
- Where a moulding or ornament projects, we measure to its furthest point.
- Inner dimensions are the usable space the mattress actually occupies.
The tansu measured: what else we record
A chest is more than its outline. For tansu, our listings add the figures you need to live with one:
| Figure | Why it matters |
|---|---|
| Each section of a two-part (kasane) chest | Most clothing chests and many kitchen chests separate into upper and lower sections. Each travels, and climbs stairs, on its own; we give both. |
| Inside drawer dimensions | A drawer's inside measurement decides whether folded kimono, files or tableware will fit. Allow about 1 cm above the tallest item. |
| Hidden compartments | Sea chests and merchant's chests often hide a compartment behind a door or drawer; we note where one exists. |
| Weight | Keyaki and chestnut chests with heavy iron can weigh far more than they look; paulownia is surprisingly light. Weight governs carriage and whether a floor or step will take it. |
| Height of the steps | On a stair chest (kaidan-dansu) we give the overall height and the depth of the deepest step. |
The old units behind the numbers
Japanese furniture was built in traditional units, and its sizes still follow them. Knowing the units explains why so many chests share the same widths.
| Unit | Value | Where you meet it |
|---|---|---|
| Sun | about 3.03 cm (1.19 in) | Drawer heights, fittings, board thickness |
| Shaku (10 sun) | about 30.3 cm (11.9 in) | Chest widths: a "three-shaku" clothing chest is about 91 cm wide; four shaku, about 121 cm |
| Ken (6 shaku) | about 1.82 m (5 ft 11.6 in) | The bay between pillars in a Japanese house; long chests and nagamochi are sized to sit within it |
| Tatami mat | about 1.82 × 0.91 m in the Kanto size; larger in Kansai | Room sizes, and why so many chests are a half or a third of a mat in width |
The Japanese have long counted tansu not by the piece but by the pole, sao: one chest is hitosao. The word recalls the carrying pole once passed through the iron handles on a chest's sides.
Checking that a piece will fit
- Measure the route, not only the room. Doorways, turns in corridors and stairwells decide more deliveries than wall space. Compare the smallest opening with the piece's two smallest dimensions.
- Use the sections. A two-part chest travels in two pieces; check each section, not the whole.
- Remember the fittings. Our width excludes iron handles and pulls. Add their projection, usually a few centimetres, where the piece must slide into a recess.
- Check the doors and drawers open. A hinged door needs its own width in clear space in front; a drawer needs its depth.
- Mark it out. Masking tape on the floor and wall shows the footprint and height better than numbers on a screen.
- Allow for packing. For international shipping, a crated chest is larger and heavier than the piece itself; we quote carriage on the packed size.
Answered plainly
Are measurements given in centimetres or inches?
Centimetres, which is how Japanese furniture is measured, with inches alongside where space allows.
Why does the listing width differ from the width I measured?
Usually because of the fittings. We measure the body at its widest point, excluding projecting iron. Old timber also moves a little with the seasons, so expect a few millimetres either way.
Can a chest be made smaller?
Some can. Pieces marked customisable can be reduced in width or depth, or fitted with legs, at a quoted cost. Ask through the enquiry form.
Character or fault: reading the condition of Japanese furniture → The Japanese furniture glossary →Japanese furniture guides. The tansu guide · Japanese furniture glossary, A–M · Japanese furniture glossary, N–Z · Condition grades and restoration options · Character or fault · How we measure Japanese furniture · The Japonista furniture standard · Japanese interiors gallery · Before you buy · When your furniture arrives · Delivering large furniture · How we pack furniture · Customising antique furniture · Remaking old doors and fittings · Fitting old doors with confidence · Aftercare and repairs
Private concierge
Looking for something in particular?
Describe the piece or the project you have in mind. A senior advisor in Tokyo reads every case file personally and replies within two business days, with fees set out in writing before any work begins.