Seiko Superior, Grand and King Quartz: Twin Crystals and High Accuracy, 1971 to 1985
In August 1978 Suwa Seikōsha put two quartz crystals into one wristwatch and rated it to within five seconds a year. The watch was the Superior Twin Quartz on calibre 9983, and the Seiko Museum Ginza still keeps one. It closed a seven-year climb that began with the V.F.A. of 1971 and ran through the Superior, the Grand Quartz and the King Quartz. Our reading: these quiet day-date watches are the real second act of Japanese quartz, and they explain modern Grand Seiko quartz better than the Astron does. Our history of the Seiko house tells the story of the whole firm; this guide follows its high-accuracy quartz from 1971 to 1985.
| Seiko high-accuracy quartz, 1971 to 1985 | |
|---|---|
| Makers | Suwa Seikōsha for the 38, 48 and 99 families; Daini Seikōsha in Tokyo for the 08, 58, 92, 96 and 97 families |
| First of the line | The 38SQW V.F.A., shipped in November 1971 and released in December |
| The ladder | Superior at the top, then Grand Quartz, then King Quartz |
| Best rating | About five seconds a year for the Superior Twin Quartz 9983 of 1978 |
| Crystals | One tuning-fork crystal in the single-crystal watches; two of 32,768 Hz in the twins |
| End of the lines | Grand Quartz and King Quartz left the range in 1985; the last Superior twins were catalogued until 1985 |
| Heirs | Grand Seiko quartz 95GS of 1988 and calibre 9F83 of 1993 |
After the first quartz watch, accuracy became the contest
Seiko sold the first quartz wristwatch at the end of 1969, the Astron on calibre 35SQ. Once quartz worked, the next question was how close a wristwatch could come to perfect time. Every Japanese maker of the 1970s had to answer it, and each answered it a different way.
The second-place problem
Citizen could not be the first to make a quartz wristwatch, so it aimed to make the most accurate one. Its answer came in April 1975 as the Crystron Mega on calibre 8650, rated at three seconds a year and cased in 18-carat gold. Seiko chose a slower and quieter road: steady gains in mass-produced watches that a buyer could wear every day.
It made no sense to announce themselves as the world’s second producer of quartz watches, so they decided to make the world’s most accurate quartz watch.
James Dowling, watch writer, 2019
Two factories inside one house
Seiko made its watches in two rival works, Suwa Seikōsha in Nagano and Daini Seikōsha in Tokyo. After the Astron, Suwa developed the 35SQW series and Daini the 36SQW, and the two kept competing through the decade. Suwa built the 38, 48 and 99 families; Daini answered with the 08, 58 and later twin families. This split is the main reason the same badge, King Quartz, can hide movements from both factories. The duel echoes the mechanical rivalry told in our guide to King Seiko and Grand Seiko in the 1960s.
See also: The Seiko Astron, for the 1969 watch that started it, and the watch almanac, for the family trees of the great houses.
The V.F.A. and the first Superior cut the error to seconds a month
The first step was a quartz watch that could be made in numbers and still keep time within seconds a month. Suwa reached it with the 38 family, and the best of that family carried the letters V.F.A.
The 38SQW V.F.A. of 1971
In 1971 Suwa developed its own CMOS chip, the R-38A, which ran at only 1.5 volts. The chip went into the 38SQW, which was shipped in November 1971 and went on sale in December. The day-date 3823 inside it was rated at five seconds a month, or within about a minute a year. Most watches with this calibre carry the letters V.F.A., Seiko's mark for a finely adjusted grade. Its crystal ran at 16,384 Hz, half the 32,768 Hz that later became the standard. The movement was regulated by a step variable condenser, and replacement blocks from December 1978 used 32,768 Hz crystals with trimmers.
The Quartz Superior 3883
The Superior arrived on calibre 3883 and sat above every V.F.A. model, even the Grand Seiko V.F.A. One Superior on case 3883-7000 is dated January 1974, and the reference 3883-014 appears in the 1974 catalogue. The domestic watch was rated at two seconds a month, while the export version, sold as a GFA model, was rated at one. The domestic case was numbered 3883-7000 and the export case 3883-7019. With ceramic condensers for adjustment, about one second a month was the practical limit for mass production.
The 4883 and the B movements
In 1976 the Superior moved to the 4883, rated at one second a month, and the word Quartz left the dial. From June 1977 the 48 family changed from the A to the B movements. The B versions took the small SR936SW cell in place of the larger one, which made the cases smaller and flatter. The change brought no difference in function or rating. The first 4883-8001 was replaced in 1977 by the 4883-8100.
See also: Grand Seiko and Credor, for the house's dress lines, and Ginza and the watch, for the street where Seiko kept its showroom and museum.
Grand and King Quartz made a ladder below the Superior
By 1975 Seiko sold its best quartz on three rungs: Superior at the top, Grand Quartz in the middle and King Quartz below. The names borrowed the prestige of Grand Seiko and King Seiko, the mechanical lines of the 1960s. Both factories made King Quartz movements. The single-crystal Grand Quartz ran on the 48 family, which grew out of Suwa's 38.
The Grand Quartz 4843
The day-date 4843 arrived in 1975 under the model code 48GQW. In 1976 the date-only 4842 and the plain 4840 joined it. The mean rate at room temperature stayed under five seconds a month. Grand Quartz watches passed the AAA class of the Japan Chronometer Inspection Association. The movement measures 25.6 mm across and 4.8 mm high, with 7 jewels and a six-pole step motor. Pull the crown and the seconds hand stops at a ten-second mark, so the wearer can start it on a time signal. The day wheel switches between Japanese and English, a small sign that these were made first for the home market.
Suwa's King Quartz, 4822 and 4823
The King Quartz 4823 shares the size and functions of the 4843, rated at ten seconds a month. Seiko catalogued the 48 and 08 King Quartz families from 1975. In June 1977 the 4822 and 4823 moved to B movements with the smaller battery, together with the Grand Quartz and Superior calibres.
Daini's King Quartz, 0852 and 0853
Daini's 08 series reached the shops in late 1974 under the QT, QZ and King Quartz names. The King Quartz 0852 and 0853 were rated at ten seconds a month and carried trimmer condensers for regulation. A watch from December 1976 shows the 0853B version of the movement. The 1976 home catalogue gave this watch a full page and listed a two-year battery, a one-touch battery lid and a battery warning. It also promised a seconds correction worked by the crown.
The 58KQ and the Credor link
In 1977 Daini's 5856 became the day-date King Quartz, marked 58KQW in Japan, with the 5855 for date-only models. It held ten seconds a month and let the owner correct the seconds by turning the crown. The same 5856 also went into Credor watches on case 5856-7000. The day-date King Quartz later moved to the twin calibres 9723 and 9923.
| Line and calibre | Factory | Year | Rating |
|---|---|---|---|
| V.F.A. 3823 (38SQW) | Suwa | 1971 | Five seconds a month |
| Superior 3883 | Suwa | 1974 | Two seconds a month at home, one for export |
| King Quartz 0852 and 0853 | Daini | Late 1974 | Ten seconds a month |
| Grand Quartz 4843 (48GQW) | Suwa | 1975 | Under five seconds a month |
| King Quartz 4823 | Suwa | 1975 | Ten seconds a month |
| Superior 4883 | Suwa | 1976 | One second a month |
| King Quartz 5856 (58KQW) | Daini | 1977 | Ten seconds a month |
See also: Japanese condition ranks, for reading a grade on a home-market watch, and Kept in the box, for why so many survive in good order.
How the Twin Quartz works: a crystal keeps time, its partner feels the heat
A tuning-fork crystal changes its frequency as the temperature changes, and that drift was the main error left in a good quartz watch. Seiko's answer was to put a second crystal inside the watch and use it as a thermometer.
The temperature problem
The frequency of most watch crystals follows a curve against temperature, close to a parabola with a peak. Two crystals with different peak temperatures drift by different amounts. The difference between their frequencies then rises almost in a straight line with temperature. That gives the circuit a reading of the temperature without any separate sensor.
Two crystals, one circuit
In the 9923 both crystals run at 32,768 Hz and have different temperature curves. The master crystal drives the divider and the step motor; the second serves only the compensation. A circuit run by a small microcomputer reads the difference and corrects the rate. The curves of the two crystals cross at about 24 °C. The movement has a main trimmer for the rate and a second trimmer for the compensating oscillator.
Daini's other route
Daini built its own twins on a different idea and averaged the timing of two crystals with different temperature curves. Its late 9682 also reached five seconds a year. One early King Quartz twin used the two-crystal difference to decide how many crystal pulses to skip.
What the engineers measured
The 99 Twin Quartz was about twelve times as accurate as the Astron's 35SQ and ran twice as long on a battery. Its movement is 3.7 mm thick, with 5 jewels, two 32,768 Hz crystals and one CMOS chip. It works from minus 10 °C to plus 60 °C and runs about two years on one silver-oxide cell.
See also: Bulova Accutron and Precisionist, for the tuning fork before quartz and the high-frequency quartz after, and the Casio house, for the digital road Japan took next.
The twin families arrived in five waves between 1978 and 1980
Five twin calibre families came out in less than two and a half years and were spread across the Superior, Grand, King and plain Quartz lines. Suwa and Daini each built their own, so the twin badge covers two different machines. A dial with the small double-honeycomb mark at six o'clock tells the owner a twin calibre is inside.
| Family | Factory | First out | Main uses |
|---|---|---|---|
| 99 | Suwa | August 1978 | Superior 9983 and 9980, Grand 9940 to 9943, King 9923 |
| 92 | Daini | December 1978 | Grand Quartz 9256, later King Quartz 9223 |
| 97 | Daini | October 1979 | King Quartz 9722 and 9723 |
| 96 | Daini | September 1980 | King Quartz and plain Quartz 9641 and 9642; Superior 9681 from 1982 |
| 94 | Suwa | November 1980 | Superior 9481 from 1981; King Quartz 94KQ |
The Superior 9983 and its brothers
The 9983 took the Superior into twin quartz in 1978 and gave the line the name Superior Twin Quartz. It was rated at about five seconds a year, the tightest of the Seiko twin lines. It shows the day and date, and the day reads in Japanese or English. The three-hand 9980 of the same family joined it from 1981. Both stayed in the range until 1985. The 9983 is listed in Japan's national survey of industrial technology as the first wristwatch with two quartz crystals.
The Grand Twin Quartz 9943
The 9943 was the Grand Twin Quartz of 1978 and gave the Grand name its first rating per year, about ten seconds. In 1979 the three-hand 9940 and the date-only 9942 followed. Seiko coded the three as 99GQW, 99GQ and 99GQC.
The King Twin Quartz 9923
The 9923 came in 1979, a year after the first two twins, and took the King to about twenty seconds a year. That made a clean ladder of five, ten and twenty seconds a year for Superior, Grand and King. Seiko counted that rating for a watch worn at least eight hours a day between 5 °C and 35 °C. A month of unusual wear can still move it by up to four seconds.
The late Superiors, 9481 and 9681
The 9481 joined the Superior range in the second half of 1981 as a three-hand watch with no date. The 9681 followed in 1982 and was the last calibre added to the Superior Twin Quartz. Both held five seconds a year and both stayed in the catalogue until 1985. They take different cells: the 9481 an SR1120SW, the 9681 an SR920SW, and the 9983 and 9980 a third type. The Dolce Twin Quartz of the same years was rated at twenty seconds a year.
The end of the lines
Grand Quartz and King Quartz both left the range in 1985. The field then moved on to temperature correction built into the chip itself, which was easier to make. The Grand Quartz idea returned in 1988 under the Grand Seiko name.
See also: Vintage Seiko divers, for the tool watches of the same factories, and the Seiko 6139, for Suwa's automatic chronograph of 1969.
The rivals took a faster road, and Seiko kept the tuning fork
Seiko's rivals chased accuracy with much faster crystals. Seiko kept the 32,768 Hz tuning fork and fixed its weakness, temperature, with a second crystal.
Citizen and the Crystron Mega
The Crystron Mega went on sale in April 1975 on calibre 8650, rated at three seconds a year. Its case and band were 18-carat gold, and its battery lasted about a year. The crystal ran at 4,194,304 Hz, 128 times the usual watch frequency, without any temperature compensation. About 3,000 were sold. A second generation on calibre 7370D was rated at five seconds a year. Our guide to vintage Citizen follows the rest of that house.
Why Seiko stayed at 32 kHz
The high-frequency watches of 1975 and 1976 reached ratings counted per year. Their 4 MHz crystals drew a lot of current and were large, so the batteries ran down fast and the cases grew thick. The twin let Seiko reach a rating per year in a thin movement on a two-year cell. Our reading: that choice favoured the owner who wears the watch daily over the record on paper.
The Swiss answer
Omega's Marine Chronometer of 1974 came with a certificate of tests at the Besançon Observatory. Later Longines and ETA took up the twin-crystal idea and gave the second crystal a much higher frequency. That method spread through the Swiss trade and was sold by Breitling as SuperQuartz. Our pages on the Omega house and Longines trace both houses.
See also: Orient and Orient Star, for the third Japanese house, and Swatch, 1983, for the Swiss reply aimed at the other end of the market.
Telling them apart starts with the calibre on the case back
These watches look alike: steel or gold-plated cases with sharp facets, applied indices and a day-date window. The case-back reference names the calibre in its first four digits, and the calibre settles the line. A Superior on 3883-7000 is the 1974 watch; a 9983 is the twin of 1978.
Reading the dial
The early 38SQW dials say V.F.A. The 3883 Superior still printed Quartz before Superior, and the 4883 dropped the word. Twin calibres carry the double-honeycomb mark at six. A King Quartz or Grand Quartz badge alone does not settle the factory, because Suwa and Daini both used the names.
Reading the movement
Suwa's 38 movements measure 25.6 mm across, the same width as the 48 and 99 families. The 99 twin is far thinner at 3.7 mm against 4.8 mm for the 4843. Two crystal cans and two trimmers on one circuit mark a twin. Daini's 0853 has a layered calendar side, and its dial is held by two eccentric pins.
Reading the battery hatch
The 48 A movements used a larger cell, and their battery hatch stood out from the case back at twelve. The B movements of June 1977 took the small SR936SW, and the hatch sat flush. Seiko changed the case number from 0 to 1 to mark the B version, so a 4843-8040 became a 4843-8110.
A collector's review of a Seiko Superior quartz, with close views of the case, dial and finish.
See also: The full set, for what box and papers add, and our grading guide, for how we describe condition.
Keeping one running means trimmers, cells and patience
A high-accuracy quartz of the 1970s is now forty to fifty years old, and its accuracy depends on parts that age. The rating printed in the catalogue was for a new watch at room temperature.
Regulation
Every line here was regulated with trimmer condensers, small screws that tune the crystal circuit. A twin has two: one for the rate and one for the compensating crystal. Turning the wrong one can undo the compensation, so this work belongs with a watchmaker who knows the calibre.
Cells and leaks
The calibres take different silver-oxide cells, and some of the original types have been renamed. The 5856 first used a cell coded SB-DS and now takes an SR1120SW. A dead cell left inside for years can leak onto the circuit, so the battery bay is the first place to look. Most calibres warn of a low cell: the 9923 moves its seconds hand in two-second steps.
Condition and originality
Many of these watches were worn daily for years, so check the facets of the case, the plating and the bracelet. Gold-plated cases wear at the edges first, and the faceted lugs are the hardest part to restore. Our authenticity guarantee explains how we check a watch before it leaves.
See also: Okachimachi, for the Tokyo quarter where many of these change hands, and Why the world's treasures came to rest in Japan, for why so many stayed in the country.
The heirs carry the Grand name and the same aim
Three years after the Grand Quartz ended, the accuracy line came back under the Grand Seiko name. The 95GS of 1988 was the first quartz Grand Seiko, rated at ten seconds a year. Its crystal was chosen for resistance to temperature, humidity and shock and then aged for a long period before use. We keep a Grand Seiko 9581-7010 in 18-carat gold, a watch of that first quartz generation.
The 9F83 of 1993
Five years later the 9F83 kept the ten-second rating and added a motor strong enough for thick, long hands. Its rating came from careful selection and ageing of each crystal. The date changes in an instant, and the hands are as long as those on other Grand Seiko watches.
They decided that they could, and should, go further by focusing on the simple essentials of precision and durability.
Seiko Watch Corporation, 2018
The same aim in a dress watch
Gold-cased Seiko quartz of the period shows the same aim in a dress case. We keep a Grand Quartz in solid 18-carat gold and a Seiko quartz 7820-5300 in an 18-carat gold case.
See also: our Seiko pieces, and collectible watches, for where these sit among the great watches.
The shelf in Japan this week
On the home shelf the Superior is the line most often offered, and the vintage Grand Quartz is the hardest to find. On 31 October 2026 at about 07:50 Japan time we read the titles of 361 unique Japanese offers across four searches for Twin Quartz, Superior, Grand Quartz and King Quartz. We set aside 103 titles for other Seiko watches, mostly modern Grand Seiko quartz, and 67 for other brands. We also set aside 25 mechanical or unclear Superiors and 59 parts, straps, gaskets and catalogues, which left 107 watches.
| Line named in the title | Watches | Share |
|---|---|---|
| Superior, single crystal or twin | 51 | About 48 per cent |
| King Quartz, Suwa or Daini | 40 | About 37 per cent |
| Grand Quartz, single crystal or twin | 12 | About 11 per cent |
| Twin Quartz, line not stated | 4 | About 4 per cent |
What the census shows
The 4883 was the calibre named most often, in 19 titles, ahead of the twin 9983 in 15 and the first Superior 3883 in 7. Among King Quartz titles the Daini 5856 led with 8, with the Suwa 4823 at 7. Thirty-three titles named a twin calibre, and two used the Twin Quartz name on a single-crystal 4883. Only 44 titles said the watch was running and 21 said it was faulty or sold as found. Only 5 named a box, papers or original bracelet, and 2 named a solid gold case. We record no prices here.
See also: our collectible watches, for the watches we describe today.
The lines in dates
| Year | Event |
|---|---|
| 1969 | The Astron on calibre 35SQ, the first quartz wristwatch |
| 1971 | The R-38A chip; the 38SQW shipped in November and on sale in December |
| 1974 | The Quartz Superior 3883; Daini's 08 series with the King Quartz 0852 and 0853 late in the year |
| 1975 | Grand Quartz 4843 and King Quartz 4823; the Crystron Mega in April |
| 1976 | Superior 4883 at one second a month; Grand Quartz 4842 and 4840 |
| 1977 | The 48 B movements from June; Daini's King Quartz 5856 |
| 1978 | Twin Quartz: Superior 9983 in August, Grand 9943; Daini's 92 in December |
| 1979 | King Twin Quartz 9923; Grand 9940 and 9942; Daini's 97 in October |
| 1980 | Daini's 96 in September and Suwa's 94 in November |
| 1981 and 1982 | Superior 9980 and 9481, then the 9681 |
| 1985 | Grand Quartz, King Quartz and the Superior twins leave the catalogue |
| 1988 | The 95GS, first quartz Grand Seiko |
| 1993 | The 9F83 |
Where the record differs
The record of these watches is mostly firm, but six dates and figures differ between careful accounts. We give each version and our reading.
- The first Superior: some date the 3883 to 1973, others to 1974. A watch made in January 1974 and a 1974 catalogue entry fit both. Our reading: production began late in 1973 and the watch was in the shops in 1974.
- The 3883 rating: two seconds a month for the home model, one for the export GFA model. Accounts that give one second a month for every 3883 are quoting the export figure.
- The 48 Superior: one account places it in 1975; the calibre record gives 1976. Our reading: developed in 1975 and catalogued in 1976.
- The first Grand Quartz: one account says the 4843 replaced the 3823 in 1974; most give 1975. We follow 1975.
- The first King Quartz: the Daini 08 King Quartz appears in late 1974 in one account and from 1975 in another. Both can be true, since a late-1974 launch fills the 1975 catalogue.
- The early 38 rating: one account says the 38 started at twenty seconds a month; the V.F.A. was rated at five. Both can be true, since the 38 family also had lower grades than the V.F.A.
A correction to the common story: the 9983 is often called the most accurate quartz watch of its day, but the Crystron Mega of 1975 was rated tighter, at three seconds a year. What Seiko built first was a two-crystal watch that held five seconds a year on a two-year cell.
What we checked and left out
Four claims reached our notes and did not reach this guide.
- That Seiko under-rated these watches for decades. One account says so, but we found no test data to stand behind it, so we give only the catalogue ratings.
- A full list of Daini twin calibres with dates. The families are clear, but the individual calibre dates disagree, so we give families only.
- Production totals. No reliable figure for any Superior, Grand Quartz or King Quartz reference has been published, so we give none.
- Period prices from Japanese catalogues. They exist, but we do not print prices in our Journal.
Why the Superior matters
The Superior and its two lower rungs matter because they show how Seiko turned quartz from a laboratory record into a watch for every day. The V.F.A. made the quartz watch a product; the Superior made it precise to a second a month; the twin made it precise to seconds a year. Each step kept the 32,768 Hz tuning fork, a thin case and a battery that lasted about two years. The same aim returned in 1988 in the first quartz Grand Seiko.
For the collector, these are the most direct way to own Seiko's quartz decade at its best: watches of the factories that built the Astron, with the house's finest cases and dials. The Japanese shelf holds about a hundred of them this week, with the Superior far ahead and the vintage Grand Quartz scarce. Our view is that a running twin, with both trimmers untouched and a clean battery bay, is the most honest witness to how Japan made quartz its own. That is our reading.
Answered plainly
What does V.F.A. mean on a Seiko quartz?
It marks Seiko's finely adjusted grade. On the 38SQW of 1971 it meant a calibre rated at five seconds a month.
What is a Seiko Twin Quartz?
A quartz watch with two crystals: one keeps time, the other senses temperature so the circuit can correct the first.
How accurate is a Superior Twin Quartz?
It was rated at about five seconds a year at normal temperatures when new.
Is a Grand Quartz an early GS?
No. Grand Quartz was a separate line from 1975 to 1985; the first quartz Grand Seiko came in 1988.
Did Suwa and Daini make the same King Quartz?
No. Both used the name, but on different calibres: Suwa's 48 family and later twins, Daini's 08, 58 and its own twins.
What is the difference between a 4883 and a 9983?
The 4883 of 1976 has one crystal and was rated at a second a month; the 9983 of 1978 has two and was rated at five seconds a year.
Can a vintage twin still hold its rating?
The rating was for a new watch at room temperature. After forty years the crystals and trimmers have aged, so expect some drift until a watchmaker who knows the calibre regulates it.
With care from Tokyo,
The Japonista Curation and Concierge Team
Further reading
- Up: The Seiko house, for Hattori, Seikōsha, Suwa and Daini.
- Up: The watch almanac, for the family trees of the great houses.
- Across: The Seiko Astron, for the 1969 watch these were built to surpass.
- Across: Grand Seiko and Credor, for the quartz line after 1988.
- Across: Vintage Citizen, for the Crystron Mega's house.
- Bridge: Ginza and the watch, for the street of Seiko's flagship and museum.
- Bridge: Japanese condition ranks, for reading a Japanese grade.
- Seiko Kinetic: AGS and Auto Quartz, for the self-charging quartz watch from 1986 to 2014
- Down: Seiko, for the Seiko pieces we describe today.
- Down: Our authenticity guarantee, for how we check every watch.
Begin a private request if you are looking for a particular high-accuracy Seiko, from a V.F.A. 38SQW to a Superior Twin Quartz 9983. We search Japan for it and check it before it leaves.
References
- Timepieces knowledge: the evolution of quartz (The Seiko Museum Ginza)
- Timepieces knowledge: the evolution of quartz (Japanese) (The Seiko Museum Ginza)
- Superior Twin Quartz, 1978 (The Seiko Museum Ginza)
- Seiko history: the quartz era (Japanese) (The Seiko Museum Ginza)
- The 99 Twin Quartz watch (Japanese), Akahane Yoshikazu and Ogawa Tokumon (Journal of the Horological Institute of Japan, J-STAGE)
- Superior Twin Quartz 9983 (Japanese) (National Museum of Nature and Science, industrial technology database)
- Evolution of CMOS LSI circuits for watches (Semiconductor History Museum of Japan)
- Seiko calibre 9983 (The Seiko Guy)
- Seiko calibre 9943 (The Seiko Guy)
- Seiko calibre 9923 (The Seiko Guy)
- Seiko calibre 4843 (Japanese) (The Seiko Guy)
- Seiko calibre 5856 (The Seiko Guy)
- Seiko calibre 3823 (Japanese) (The Seiko Guy)
- Seiko calibre 3883 (Japanese) (The Seiko Guy)
- Seiko calibre 9481 (The Seiko Guy)
- Seiko calibre 9681 (The Seiko Guy)
- Seiko Superior: the quartz crisis begins (VintageSeikos.NL)
- Grand Quartz and the twin quartz craze (VintageSeikos.NL)
- Seiko Grand Quartz (Watch Wiki)
- Seiko King Quartz (Watch Wiki)
- Twin Quartz (Watch Wiki)
- Seiko King Quartz 0853 (Adventures in Amateur Watch Fettling)
- Seiko 3823A (GrailWatch reference)
- Seiko 3883A (GrailWatch reference)
- Crystron Mega, 1975 (Japanese) (Citizen)
- Citizen Crystron Mega (Mechanical Debt)
- A short history of high-frequency, super-accurate quartz watches, James Dowling, 2019 (Esquire UK)
- Calibre 9F stories (Grand Seiko)
- Grand Seiko innovation (The Seiko Museum Ginza)
- Seiko early high-end quartz: Superior 3883-7000 (Plus Ultra)
- Seiko 3883-014, 1974 catalogue (Tiny Hour Tales)
- Celebrating the 25th anniversary of the Grand Seiko 9F quartz caliber (Seiko Watch Corporation)