Rolex Cellini: the King Midas, the Prince, the 1908 and Japan

A goldsmith's name

Rolex named its dress line after a man who worked gold, not a man who measured time. Benvenuto Cellini was a Florentine goldsmith and sculptor of the Renaissance, admired in his own century and remembered for his memoirs as much as his metalwork. The choice told buyers what the watches were for: gold, finish and the look of the thing on a cuff. Every Cellini was cased in yellow, white or rose gold, or later in platinum. None used the screwed Oyster case, and the early watches were not built for water. Our reading: the name was a promise about material and craft, and the line kept it for fifty years. See also: the Rolex house history, for the sealed case the Cellini set aside, and Japanese gold and platinum marks, for how its metal is stamped.

The salt cellar in Vienna

Cellini's surviving masterpiece is a table ornament, and it explains the borrowed name better than any advertisement. The Saliera is a salt and pepper cellar in gold and enamel, made between 1540 and 1543 for King Francis I of France. It is the only work in gold by Cellini that survives. Its figures turn it into a picture of the world: Neptune for the sea, a goddess for the earth, and the times of day and the four winds around the base. The arms and emblems of the French king rule over this small cosmos. The piece later passed through the French royal family to the Habsburg Archduke Ferdinand II, and it now sits in the Kunstkammer in Vienna. Rolex used the Saliera itself in Cellini advertising of the 1980s. Our reading: the house was borrowing a goldsmith's reputation for making precious metal do more than shine, and saying so in pictures. The watch line had no water resistance and no sporting record to boast of. It had gold, and a name that made gold sound like art.

Why Rolex wanted a second kind of watch

The Cellini grew from a sales problem, not a design brief. Hans Wilsdorf died in 1960, and the brand director René-Paul Jeanneret gained more say in where the house went next. André Heiniger became chief executive in 1963 and shared the aim of taking Rolex further upmarket. Too many customers bought one Rolex and kept it for decades, receiving a gold one only on retirement. Jeanneret wanted people to own several Rolex watches, one for each purpose, and a dress watch filled an obvious gap. The new watches carried on the refinement of the older Precision dress line, but in gold alone, and many were set with diamonds. The line was never tidy. Its shapes, sizes and styles varied so widely, with no model names to sort them, that one historian of the house found no single reference that stood out from the early years. Our reading: the lack of a hero watch is why the Cellini stayed quiet while the sport models grew loud. It is also why it still rewards a collector who looks closely. See also: Rolex reference numbers, for decoding a Cellini case number, and the Watch Almanac, for the house's place among the others.

The King Midas, 1962 to 1972

The King Midas was the heaviest gold wristwatch of its day, and it gave the dress Rolex its character before the dress Rolex had a name. It appeared in the early 1960s as reference 9630, a limited run in 18 ct gold. Each example was finished by hand and weighed between about 150 and 200 grams. The case was only about five millimetres thick. Inside was the calibre 650, a slim hand-wound movement with 18 jewels. It cost about a third more than the Day-Date, then the only other Rolex made in precious metal alone. Production ran to about 1972. See also: Patek Philippe's Calatrava, the dress watch the King Midas was built to rival in gold.

Built like a temple

The case was drawn from Greek architecture, and the reference makes sense once you turn the watch on its side. The pointed end of the asymmetric case reads as a temple roof, and the grooves of the bracelet as its columns. Collectors and sale catalogues name the Parthenon or the Pantheon as the model; accounts differ, and we print both. The crown sits on the left side of the case. Because the case was not water resistant, the crown is a simple push-pull, shaped like a small sun. Many cases carry the words KING MIDAS engraved either side of the crown, though the first 250 or so were made without them. Each case also carries its own engraved production number. The bracelet is built from solid links nearly as thick as the case. Later examples were among the first Rolex watches with a sapphire crystal. Our reading: this is architecture worn on the wrist, and it should be judged as much by its edges and engravings as by its movement. A dull or softened edge tells you more about a King Midas than its dial does.

Elvis, a cowboy and a villain

The King Midas found its famous owners quickly, and they made the watch a legend in a decade. Elvis Presley owned number 343. It came to him from the Houston Livestock Show and Rodeo, after six sold-out shows at the Astrodome in 1970. The watch is kept at Graceland. Number 600, made around 1972, went to the cowboy and showman Buddy Bray, and has since changed hands at a major sale. John Wayne is also named among its wearers. On screen, the villain Scaramanga, played by Christopher Lee, wore one in the 1974 Bond film The Man with the Golden Gun. Our reading: a gold watch for a gunman, a film star and the King was the right cast for a watch named after a king who turned all he touched to gold. Our reading: the fame came from the wearers more than from any campaign. That is one reason the record of the watch is so uneven, and why the next question has no settled answer.

Who drew the King Midas

The King Midas is often credited to Gérald Genta, but no record from Rolex or from Genta settles it. Several sale catalogues and dealers name Genta as the designer, years before his Royal Oak and Nautilus. One Japanese magazine calls it the only Rolex he designed. Rolex has never confirmed the attribution, and as far as careful researchers can find, Genta never claimed it either. We print both, and we write "attributed to Genta" in our own descriptions. The movement has a smaller dispute: most accounts credit Blancpain with the slim calibre 650, while some readers of those accounts argue for other makers. See also: our Gérald Genta guide and the Royal Oak, for the designer's documented work.

The left-hand story

A correction to the common story: the classical myth of Midas does not say he turned things to gold with his left hand. The tale is widely repeated to explain the crown on the left of the case. A careful reading of the different versions of the myth finds no such detail in any of them. The point of the myth is a moral lesson about the despair that greed can cause. Our reading: the crown is on the left because the asymmetric case left no graceful place for it on the right. The left-hand story is a good sales line that grew around a design choice. It does no harm on a dealer's card, but it is not evidence of anything. We also note that beside the yellow gold watches, white gold was rare: one detailed reference count gives exactly 144 in white gold. The total is disputed. Some say about 1,000 were made, while a closer count of production numbers puts it below 800. We give the lower figure as the better-supported one, and both appear in our table of disputes below.

From Midas to Cellini

In the 1970s the King Midas stopped being a separate watch and became part of the Cellini line. The successor reference 3580 replaced Midas with Cellini on the dial and added Genève under Rolex; little else changed. It kept the calibre 650, the thick bracelet and the deployant clasp, and its production numbers start at about 800. A small number of early 3580s carry leftover Midas dials. In 1977 the reference 4315 followed, with a much thinner bracelet of about three millimetres and the updated calibre 651. The lighter bracelet arrived just as gold prices soared in the late 1970s. Diamond-set and symmetrical bracelet versions followed, and one count puts all the Midas and Cellini bracelet variants together at roughly 6,000 watches. The quartz crisis of the 1970s also kept production small, which is why early Cellini models are scarce now. Our reading: the 1970s turned a single famous watch into a family, and the family is still being sorted by collectors. See also: Rolex serial numbers, for dating a case, and a Cellini 6623/8 on a gold mesh bracelet, from the same gold-bracelet tradition.

Octagons, quartz and the 1980s

After the King Midas, the Cellini spent two decades as Rolex's room for experiments in shape. The Cellini Octagon arrived in the 1980s: an eight-sided case in solid gold with an integrated bracelet, carrying on the angular theme of the Midas. Its dial was spare, often with only four hour markers, slim hands and a simple applied logo. A Tokyo dealer's pair of favourites shows the period well: an asymmetric reference 4017 of 1974, sold under the King Midas name, and an octagonal bracelet watch, reference 4350, of 1981. Some 4350 dials even carry the word Midas, so the trade sometimes treats it as a late member of the family. In the same years Rolex placed a quartz movement in the line. The quartz Cellini, reference 6621 in 18 ct yellow gold, is dated in Japanese trade data from 1989 to 2014. It is among the references most often named in Japan today. Our reading: quartz in a gold dress case was a practical choice, and Japanese buyers have never treated it as a lesser watch. See also: Piaget, for the slim gold watches that set the pace in these decades, and Cartier's watches, for the shaped case in the same years.

The dial that says almost nothing

A Cellini dial is easy to recognise, because it says less than any other Rolex dial. A sport Rolex always prints a model name and often several lines more: Oyster Perpetual, Superlative Chronometer, Officially Certified. A Cellini dial usually carries only the crown emblem, the Rolex name and the word Cellini. That emptiness is the point of a dress watch. It leaves room for guilloché, a moon or simply polished gold to do the talking. The later King Midas reference 3580 shows the same habit: on the switch from Midas to Cellini, the only real change was the line name on the dial and the word Genève below Rolex. For a buyer, the short dial makes small errors easy to see. A refinished Cellini dial with the wrong font or spacing has nowhere to hide. Our reading: on a vintage Cellini, the dial print is the first thing to examine and the hardest thing to restore well. Ask for a close photograph of the print before anything else. See also: our grading guide, for how we describe a dial, and a Cellini 4048 in white gold with a blue dial.

The Prince, 1928 and 2005

The Prince was the first Rolex built as a dress watch, and it returned under the Cellini name in 2005. The original appeared in 1928 as a rectangular watch. Its two famous models were the Classic, reference 1343, and the curved Brancard, reference 971. Both used a rectangular hand-wound movement made by Aegler, the factory that also supplied Gruen at the time. Some Japanese accounts start the whole Cellini story here, at about 1928 to 1929. We treat the Prince as the ancestor and the 1960s as the start of the Cellini name. See also: Jaeger-LeCoultre's Reverso, the other great rectangular watch of the late 1920s and 1930s.

Why doctors liked it

The Prince's dial is split in two, and that split gave it a nickname. The hours and minutes sit in the upper part, and a large small-seconds dial fills the lower part, in an Art Deco layout. Doctors found the large seconds dial useful for taking a pulse, so the watch became known as the Doctor's Watch. The original Prince was not water resistant, like most dress watches of its day. Small seconds was the normal layout then; the centre seconds hand became common later. The originals were made in gold, silver, platinum and two-tone, and later in steel. Our reading: the Prince belongs to the age when a wristwatch was still a pocket watch learning a new shape, and that is its charm. A collector who wants the Cellini idea at its root should start here, not with the King Midas. The Prince was named in only a handful of the Cellini titles we read in Japan this week. See also: Vacheron Constantin, for the dress watch at its most classical.

Calibre 7040 and a glass back

The Cellini Prince of 2005 was a technical statement hidden behind a dress watch. It was shown at Baselworld in four references: 5440/8 in yellow gold, 5441/9 in white gold, 5442/5 in rose gold and 5443/9 in white gold. Dial and case decorations included Clou de Paris, Godron and a flame pattern called Rayon Flammé de la Gloire. Inside was the calibre 7040, a hand-wound, chronometer-certified movement with a Breguet overcoil. The power reserve is given as 72 hours by some accounts and about 70 hours by others; we print both. The movement finish was matched to the decoration of each case. It was among the first Rolex movements with the Paraflex shock absorber. The Prince was also the first modern Rolex with a sapphire display back. The case measured about 45 by 29 millimetres. The line ended in about 2015. Our reading: the 7040 is the most interesting movement Rolex made for the Cellini, and the Prince is the place to see it. See also: Grand Seiko and Credor, for Japan's own fine hand-wound dress movements.

Danaos, Cestello and the Cellinium

In the 1990s the Cellini turned from sharp geometry to soft, rounded cases. The Danaos has a cushion case, with two-tone dials of concentric circles in some versions. Its sizes vary: about 35 mm by one account, 38 mm for the hand-wound reference 4243 with calibre 1602. The Cestello has lugs that move with the wrist. The Orchid, named after the flower, came in solid gold. The Cellissima was made for women, in round or oblong cases of about 26 mm, often with diamond bezels. In about 2001 the Cellinium brought platinum: the 35 mm reference 5240 and the 38 mm 5241. Our reading: these are the Cellini models most often mistaken for other houses' watches, because nothing about them shouts Rolex. See also: a Danaos 4233 in white gold of 2001, and a 26 mm Cellini 4109 of 1991.

Rebuilt in 2014

In 2014 Rolex rebuilt the Cellini as one coherent family, which it had never been before. The new collection was shown at Baselworld in three lines, Time, Date and Dual Time, for twelve models in all. Every case was round, 39 mm across, and cast in white gold or Everose, the rose gold made in the house's own foundry. The Time came as references 50505 in Everose and 50509 in white gold, the Date as 50515 and 50519, and the Dual Time as 50525 and 50529. The collection was designed by Emmanuel Gueit, who later sent word to a Japanese writer that the line was being discontinued. For the first time the Cellini wound itself. The Time used calibre 3132, shared with the Explorer of the day, the Date calibre 3165 and the Dual Time calibre 3180, each with about 48 hours of reserve. Water resistance was 50 metres. Our reading: 2014 is the year the Cellini stopped being a drawer of shapes and became a collection. See also: Omega's house history, for the De Ville, the rival dress line of the same decades.

A double bezel and a flame on the dial

The 2014 Cellini is recognised by its bezel before its dial. The bezel is doubled: one ring domed, the other fluted. The fluting is repeated on the case back, where it serves to screw the back down, and the back itself is domed like those of older Rolex watches. The Time line had black or white lacquer dials with long Roman numerals and stretched hour markers. The Date and Dual Time had a guilloché pattern called rayon flammé de la gloire, a flame of glory radiating from the centre. On the Date, the date is read by a hand that points to a track around the dial. The Dual Time places a second time zone in a small dial at six, with a day and night indicator in the form of a sun and a moon. The second zone moves in one-hour steps. Our reading: the double bezel is the signature to look for on a modern Cellini, as the stepped case is on the King Midas. Leather straps were standard. That makes original buckles and strap condition worth asking about on a used example.

The hands-on film above shows the 2014 collection at its launch.

A moon after six decades

The Cellini Moonphase of 2017 gave Rolex its first moon display since the 1950s. It was reference 50535, in Everose gold, 39 mm across. The calibre 3195 is self-winding and certified as a Superlative Chronometer. The moon display is said to stay accurate for 122 years before it needs a one-day correction. The date is read on the outer track of the dial with a pointer. The blue disc is enamelled, not painted, with gilt stars, and the full moon is cut from a meteorite. The watch came on a brown strap with a new folding clasp. Its ancestors are the 6062 and the 8171, two moon-phase watches of the early 1950s that collectors now prize above almost any Rolex. Our reading: the Moonphase was the most ambitious Cellini, and it was the last one standing. In 2022 Rolex withdrew every other Cellini, leaving only the 50535. See also: Patek Philippe beyond the Calatrava, for the house that owns the moon-phase dress watch.

The Perpetual 1908 takes over

In March 2023 the Cellini name ended and the Perpetual 1908 took its place as Rolex's only dress watch. The 1908 is the first watch in a new Perpetual collection. It was Rolex's first new collection since the Sky-Dweller of 2012. The case is 39 mm across and about 9.5 mm thick. It came first in 18 ct yellow gold as reference 52508 and white gold as 52509, with white or black dials. The dial reinterprets an Oyster Perpetual of 1931, with Arabic 3, 9 and 12 and a small seconds at six. The hour hand is in the Breguet style, and the minute hand is shaped like a two-edged sword. The bezel keeps the Cellini idea of two rings, fluted below and domed above. Unlike any Cellini, the case is water resistant to 50 metres. Our reading: the 1908 is a Cellini in all but name, and Rolex chose to say so through the bezel. See also: the Rolex room, for dress and sport Rolex watches graded in Tokyo now.

Calibre 7140 and the transparent back

The 1908's real change is inside, where a self-winding movement replaced the hand-wound calibres of the old line. Rolex developed calibre 7140 for this watch. It drives two central hands and a small seconds at six. The power reserve is about 66 hours. The movement beats at 28,800 vibrations an hour and has 38 jewels. It is visible through a sapphire case back, with a cut-out rotor in gold. The case back lets the owner watch the oscillating weight pivot, which no Oyster allows. The crystal is domed sapphire with an anti-reflective coating on both crystal and back. The dial carries the words Superlative Chronometer above the small seconds. Our reading: the transparent back links the 1908 to the Prince of 2005 more than to any King Midas. Both are dress watches that ask to be turned over. It winds itself on the wrist, like the Cellini of 2014.

Rolex's own film above is devoted to calibre 7140.

Platinum in 2024 and the Settimo bracelet in 2025

The 1908 has grown each year since its launch, which the Cellini rarely did. In 2024 Rolex added a 950 platinum version, reference 52506. Its dial is ice blue with a rice-grain guilloché pattern. The minute track is bordered on both sides by a fine crimped guilloché pattern. In 2025 Rolex added a gold bracelet named Settimo, made for the 1908 alone. It has seven pieces to each link, and Rolex presented it on a yellow gold watch with an intense white dial. Leather remains the standard: a matt black alligator strap, or matt brown on some yellow gold versions. The film below is Rolex's own on the bracelet. Our reading: a gold bracelet for the dress Rolex closes a circle that began with the King Midas, whose solid bracelet was half its weight and most of its fame. The difference is that the Settimo is built to feel light on the wrist. See also: box and papers, for what to keep with a modern 1908.

Japan keeps its own Cellini

Japan's trade still treats the Cellini as a line in its own right, long after Rolex retired the name. Japanese price catalogues list Cellini references under their own heading, with the Prince and the Perpetual 1908 kept as separate lines beside it. Japanese dealers' guides explain the Cellini as a dress line, set apart from the sport models, with its own history and appeal. Japan's collectors were also among the first anywhere to treat vintage Rolex as collectable, with a lasting taste for small cases. Many vintage Cellini watches are small, from 26 mm ladies' cases to the 32 mm reference 4112. Our reading: in Japan the Cellini never became a footnote, because its size and its gold suited the market from the start. See also: Ginza and the watch, for the street where Japan learned to buy a fine watch, and Japanese horology, for Japan's own makers.

A suit watch in Shibuya

In 2024 a leading vintage dealer in Shibuya, Tokyo, chose two Cellini watches when asked for his recommended vintage Rolex. He is Daisuke Eguchi, whose shop is known among younger buyers as a voice on vintage watches. His picks were an asymmetric reference 4017 of 1974, sold under the King Midas name, and the octagonal 4350 of 1981. His argument was simple: a Submariner or a GMT-Master is a fine gear watch, but it never suits a suit. The Cellini, he said, has a different order of fine detail: a bracelet whose joins barely show, and a King Midas case that flows into a leather strap. The magazine that interviewed him headed the feature with a phrase that sums up the shift: now is the time of the dressy Rolex. A Japanese watch magazine later made the same point about the King Midas, as the market began to look again at gold watches. Our reading: Tokyo's vintage trade has moved the Cellini from overlooked to chosen. See also: how Japan dressed in the bubble years, when these gold watches first arrived.

Solid gold, read the Japanese way

Japanese descriptions of a gold Cellini use a few fixed words, and knowing them helps a buyer read one. Kinmuku means solid gold, as opposed to plated or capped, and it is the word that sells a Cellini in Japan. K18 is the Japanese mark for 18 ct gold, used in place of the European 750, and Pt is the mark for platinum. About two in five of the Cellini titles we read this week named gold in one of these forms. Japanese guides also stress the case metal as the line's core: gold or platinum only, with no steel Cellini at all. The Cellini's leather straps usually close with a gold buckle of the same metal as the case. That buckle is often missing on used examples, and its presence is worth noting. Our reading: in Japan the metal comes first and the reference second, which is the reverse of how most sport Rolex buyers think. Ask for the case-back and buckle marks in a photograph, and check them against the reference. See also: gold in Japan, for why Japanese buyers trust a gold mark, and kept in the box, for how such watches are stored.

The 1908 reaches Tokyo

The Perpetual 1908 reached Japan's parallel import shops in December 2023, months after its launch in Geneva. A Japanese columnist who went to see it in a Tokyo shop found it surprisingly plain in the metal, with simple hands and bullet-shaped markers. He noted that it was now Rolex's only dress model, and that the old Cellini collection had ended. A second Japanese magazine called the 1908 a hawk that hides its claws, a modest watch that is really a masterpiece. The same writer reported Gueit's own message about the end of the Cellini he had designed. Japanese reviews also note the 1908's name, from the year Wilsdorf registered Rolex in Switzerland. Our reading: Japan's watch press greeted the 1908 as the Cellini's heir, not as a new idea. That matters for anyone hunting a late Cellini: in Japan the two are compared directly, and the older gold watch is often the smaller of the two. See also: why the world's treasures came to rest in Japan, for the wider story.

Know the watch at a glance

The table is a map, not a full list. Japanese catalogues name dozens more Cellini references, many of them small ladies' watches and gem-set versions. The safest single check on any Cellini is the reference number inside the case back or, on bracelet models, inside the bracelet. See also: collectible watches, for the wider room, and a Cellini 3805 in yellow gold, a small dress watch of the classic kind.

The shelf in Japan this week

We read every one of the roughly 240 Cellini titles offered in Japan's main watch category this week. About two in five named gold in some form, and about one in four named a hand-wound movement. Quartz appeared in about one title in fourteen. About one in seven were ladies' watches. The most named references were the 6623, the 4112, the 6621 and the 6622. The modern 39 mm references of 2014 made up about one title in twelve. The King Midas was all but absent, named in only two titles. About one in seven named a guarantee, box or accessories, and about one in ten were parts, straps or buckles alone. Our reading: Japan's Cellini shelf is a shelf of small gold dress watches from the 1970s to the 2000s, and the famous names are rare. See also: our authenticity guarantee, and Japanese condition ranks, for how such lots are graded.

Where the record differs

What we checked and left out

Our earlier guides, revisited

Our Rolex house history follows the Oyster and leaves the dress line aside. This guide fills that gap, from the Prince to the 1908. Our Gérald Genta guide says plainly that he designed the King Midas. The records we read do not confirm that, so this guide keeps it as an attribution, and we have flagged the earlier guide for the same wording. Our Submariner guide covers the gear watch that the Shibuya dealer sets against the Cellini. On every other point the record here agrees with those guides. See also: Tudor, the sister house that never made a dress line of this kind.

A timeline

Why the dress Rolex matters

The Cellini shows what Rolex makes when it has nothing to prove about water, depth or speed. It began with a gold watch shaped like a temple and ended with a moon cut from a meteorite. In between it tried octagons, cushions, platinum and a split-dial Prince with a glass back. Its name came from a goldsmith, and its standard was always the metal and the finish. Rolex kept the idea in 2023, with a fluted and domed bezel on the Perpetual 1908. Japan kept the line itself, in its catalogues, its dealers' trays and its shelf of small gold watches. Our reading: the Cellini is the best place to learn how Rolex thinks about beauty, because nothing else in the catalogue distracts from it. That is our reading.

Answered plainly

Why is it called Cellini?

It is named after Benvenuto Cellini, the sixteenth-century Florentine goldsmith and sculptor. His gold Saliera survives in Vienna.

Is a Cellini water resistant?

Most vintage Cellini watches are not built for water. The Perpetual 1908 is rated to 50 metres.

Did Gérald Genta design the King Midas?

Sale catalogues often say so, but neither Rolex nor Genta confirmed it. We call it attributed.

Is the Cellini still made?

No. The name ended in 2023, and the Perpetual 1908 took its place.

Why do Japanese collectors like the Cellini?

Its small gold cases suit a long Japanese taste for small watches, and Tokyo dealers now pick it as a watch for a suit.

Seen elsewhere

Further reading

References

Zurück zum Blog

Hinterlasse einen Kommentar

Bitte beachte, dass Kommentare vor der Veröffentlichung freigegeben werden müssen.