Porsche Design Watches: Chronograph I, IWC, Eterna and Japan

Porsche Design watches in brief

Porsche Design is a design house that has made watches for more than fifty years without, for most of that time, making them itself. Its founder treated the watch as an instrument, and the best of its watches read like the gauges of a sports car: black faces, white marks, one red hand. Our Watch Almanac places the house among the other family trees of the watch world; the Porsche Design tree is the one that grew from a car.

The story divides into four periods, each defined by the maker who built the watches. Orfina, a Grenchen firm, made the first chronographs from 1972. IWC made the most inventive pieces between 1978 and 1997, among them a watch with a compass hidden under its dial, the first chronograph made entirely of titanium and a diver's watch rated to two thousand metres. Eterna, bought by the Porsche family in 1995, made the watches from 1998 until the licence ended in 2014. Since then a company founded for the purpose, Porsche Design Timepieces AG, has developed and assembled the watches in Switzerland, first at Solothurn and since 2025 at Grenchen.

For a collector the useful question is always the same: which maker, which period, which reference. The dial signature usually answers the first two, and the caseback the third. Read with care, those three things tell most of the story.

The designer and the studio

Ferdinand Alexander Porsche was born in 1935, the grandson of the founder of the car company and the son of Ferry Porsche. Family and colleagues called him Butzi. He studied at the Ulm School of Design, the school founded by Max Bill to carry the ideas of the Bauhaus into post-war Germany, and the discipline of Ulm runs through everything he drew afterwards. The same school shaped the wall clocks and wristwatches that Max Bill himself drew for Junghans, which our Junghans guide describes; the two bodies of work share a dislike of ornament and a respect for the reading of the dial.

Frankfurt, 1963

At the car company he drew the 911, first shown at the Frankfurt Motor Show of 1963 under the project number 901. At the start of the 1970s his father, Ferry Porsche, removed the founder's direct descendants from executive roles in the company to end a long family quarrel. In 1972 Ferdinand Alexander set up his own studio in Stuttgart with his brother Hans-Peter, and the first commission came from the company whose cars he had shaped.

Zell am See

In 1974 the studio moved to Zell am See, a lake town in the Austrian province of Salzburg. It has been there ever since and, from 2015, has carried the name Studio F. A. Porsche. It works for other companies as well as for the brand, and the watches of today are still drawn there.

Ownership

The ownership of the brand changed in 2003, when a new company was formed as a majority-owned subsidiary of Porsche AG to bring the car maker's accessories and the design brand's licensing business together. The company has since been renamed Porsche Lifestyle GmbH & Co. KG and is based at Ludwigsburg near Stuttgart. Ferdinand Alexander Porsche retired in 2005 and died in Salzburg on 5 April 2012, aged seventy-six.

His designer of longest standing on the watches was Roland Heiler, who worked closely with him until his retirement and later led design for the brand. Much of the Eterna-period work bears Heiler's hand as well as the founder's rules.

The Chronograph I of 1972

The first product of the new studio was a wristwatch. It was meant at first as a gift for selected Porsche employees and favoured customers, and the founder described the brief in one line: he had always wanted to make a watch to match the car. The 911 had a black speedometer and a black rev counter so that they would not dazzle the driver; the watch would be black for the same reason.

A dashboard on the wrist

The Chronograph I took its manners from the instrument panel. The dial was matt black with white numerals and luminous markers, the stopwatch seconds hand was red like the needles of the 911's gauges, and a tachymeter ran round the edge of the dial for timing speed over a measured distance. The case was forty millimetres across with a screw-down back. At a time when gold and polished steel announced the worth of a watch, the whole object, case and bracelet included, was black. It is usually described as the first all-black chronograph, and the claim is repeated in the brand's own histories.

The black finish

The black came from coatings. The earliest cases were finished in a black powder coat, and later ones by physical vapour deposition, a process that binds vaporised metal to the case. Both finishes wear at the edges with use, and a collector should expect a vintage Chronograph I to show silver at the lugs and the bezel. The same years brought a related change on the car: from 1972 the window surrounds and trim on the 911 were painted matt black instead of being chromed, an idea the founder himself pushed through.

From Valjoux 7750 to Lemania 5100

The first reference, numbered 7750 after its movement, used the Valjoux 7750, an automatic chronograph calibre introduced in the early 1970s and today one of the most widely used chronograph movements in the world. The Chronograph I was launched in 1972 and the first pieces reached customers in 1973, which makes them among the earliest watches anywhere to carry the calibre. The 7750 layout gave thirty-minute and twelve-hour counters, small seconds and a quick-set day and date.

The quartz crisis interrupted production of the Valjoux calibre within a few years, and the watch was redesigned around the Lemania 5100. That movement was built for toughness and for economical production, with plastic parts where precision did not depend on metal and a cam and shuttle chronograph in place of a column wheel. Its plate absorbed shocks well enough for the chronograph to keep running under accelerations of up to seven times gravity, which is why air forces chose it. It also changed the face: central chronograph minute and seconds hands, a twelve-hour counter at six, small seconds at nine, a twenty-four hour hand at twelve and the day and date at three. The movement has seventeen jewels and a power reserve of about forty-eight hours. German tool-watch makers favoured the same calibre for the same reasons, as our guide to Sinn shows.

References 7176 and 7177

The Lemania watches carry two reference numbers. The 7176 is regarded as the civilian version and the 7177 as the military one, though many military variants were also sold over the counter. The case had to grow taller to hold the thicker movement, and the finishes widened from black to grey, olive green and plain steel. The 7176 and 7177 remained in production longer than any other reference of the Orfina period, from the late 1970s until 1991.

Faces and films

The watch found its admirers quickly. Mario Andretti wore one through the 1978 season that made him Formula One world champion. Dustin Hoffman wore one in Kramer vs. Kramer in 1979, and the black chronograph on Tom Cruise's wrist in Top Gun in 1986 is a Chronograph I; the same watch returned for Top Gun: Maverick in 2022. The car world and the cinema did the rest, and the watch was soon on sale through Porsche showrooms to anyone who wanted it.

The early 1970s were crowded with automatic chronographs. Our guides to the Heuer Carrera, Monaco and Autavia and to Seiko's 6139 automatic chronograph describe the race that the Valjoux 7750 joined late. The Chronograph I stood apart from both: it was the only one drawn by the designer of a car.

Orfina, the first maker

Porsche Design had the drawing and no factory. The maker came through motor racing. Umberto Maglioli, an Italian driver who had raced for Ferrari, Maserati and Porsche in the 1950s and ended his career in a Porsche, had bought the Swiss firm Orfina in 1970. Orfina, a Grenchen house whose roots went back to the 1920s, made the Chronograph I and put its own name on the dial beside the studio's. Early watches read Orfina Porsche Design; the double signature is the first thing a collector checks.

Generations and finishes

Within the 7750 reference collectors recognise three generations, three case shapes (a flat-topped first case, a transitional rounded case and a later flat-faced service case), black powder coat, black PVD and a silver finish, two tachymeter scales (one marked for miles and one for kilometres) and two dial signatures. The Lemania references 7176 and 7177 add more finishes and many dial variants, including those made for military use.

After the partnership

When the partnership ended in 1991, Orfina went on making very similar chronographs under the name Prestige Watch International, often with the same 7176 and 7177 numbers engraved. A Lemania chronograph in this style is therefore not always a Porsche Design watch, and the dial and caseback signatures matter more than the shape.

The IWC years, 1978 to 1997

In September 1977 a small team from the studio met IWC in Schaffhausen, and in March 1978 the two companies signed an agreement intended to last twenty years. The watches that followed carried the signature Porsche Design by IWC and are the most technically adventurous the brand has made. IWC was then part of a German group whose watch business was led by Günter Blümlein, the manager who would later revive Jaeger-LeCoultre and A. Lange & Söhne. Our IWC guide follows the Schaffhausen house itself.

The Compass Watch, 1978

The founder was a keen hunter and walker who wanted a watch with a compass in it. The answer, reference 3510, was shown late in 1978. The watch was hinged: lift the upper half and a compass lay beneath it. The case, thirty-nine millimetres across and twelve thick, was made of aluminium with a black PVD coating, which kept it light and free of magnetic interference with the compass, and it held four sapphire glasses. The movement was IWC's calibre 375 with twenty-two jewels, and the design was covered by five patents. It came in black or in a green the makers called NATO olive, a colour that was never perfectly matched and has aged to a brownish cast on many surviving pieces. A moon-phase version, reference 3551, followed in 1985 and a titanium version, reference 3511, in 1991.

The Titanium Chronograph, 1980

In 1980 the partnership made the first wristwatch chronograph with a case and an integrated bracelet entirely in titanium. IWC had to learn to work a metal that is hard to machine and harder to polish, and the design added a detail that became a house signature: chronograph pushers set flush into the contour of the case. A rarer variant, the Chrono II, used a bead-blasted case.

Ocean 500 and 2000

The Ocean 2000 was presented at the start of the 1980s as a titanium diver's watch rated to two thousand metres, at the time an extraordinary figure for an automatic watch. It used calibre 375 at first, later calibre 37521, had a screw-down crown and a domed sapphire crystal over three millimetres thick, and a titanium case about forty-two millimetres across. Its references, 3500, 3504 and 3524, mark successive generations of case, dial and bracelet; the first bracelet was prone to failure and has often been replaced. A smaller sister, the Ocean 500, followed the same design at a more modest size.

Japanese makers were building professional divers at the same time, and our guide to vintage Seiko divers is the natural comparison: a different answer to the same question, made in steel and in Japan.

The navy watches

The Ocean series also has a military twin. While the Compass Watch was being drawn, IWC was working on a confidential project for the German navy: a truly antimagnetic diving watch for the mine-clearance divers, who had to approach underwater mines without setting them off. The result, the Ocean Bund reference 351901, took twelve years to deliver in a run of fifty pieces, and the mine divers' calibre found its way into the Porsche Design Ocean 2000 as well.

Why it ended

The partnership produced its last joint watches in 1997. The twenty-year agreement of 1978 would have run until 1998, so the end came a little early by one reckoning; the records disagree on the detail, as set out below.

The Eterna years

The Porsche family answered the question of who would make the watches after IWC by buying a watch company. In 1995 Ferdinand Alexander Porsche's holding company, F.A.P. Beteiligungs-GmbH, acquired Eterna, a Grenchen house founded in 1856, and three years later the first Porsche Design collection made by Eterna appeared. For the next sixteen years the watches were developed, made and distributed by Eterna under licence.

Roland Heiler's period

Much of the Eterna work owes its form to Roland Heiler, who worked beside the founder until 2005 and later led the design studio. The watches of these years are larger and more technical than the IWC pieces, and they took their names from parts of the car: the Indicator, the Dashboard, the Flat Six, the World Timer and the Diver.

The Indicator P'6910, 2004

Shown in 2004, the Indicator read the chronograph's elapsed minutes and hours through numerals in windows, a mechanical digital display drawn from the instrument panel of a car. Of the Eterna watches it is the one that most plainly carries the dashboard idea into the movement itself.

The Dashboard P'6612, 2008

The Dashboard line took the dial of the Chronograph I towards the instrument cluster of the modern 911. The P'6612 PTC, first shown at Baselworld in April 2008, had a honeycomb-patterned dial in black or, for the first time, off-white, a tachymeter in the house typography, three counters ringed in rhodium and red chronograph hands. Its case, crown, pusher and titanium bracelet were coated in diamond-like carbon, the first time Eterna had used the hard black coating for Porsche Design. The movement was the automatic ETA 2894-2.

The World Timer and the Diver

The P'6750 World Timer showed a second time zone in a mechanical digital display. The P'6780 Diver, announced in March 2010 and on sale that summer, was the brand's first diving watch since the Ocean 2000. It was rated to a thousand metres and housed an ETA 2892-A2 automatic in a titanium inner structure, with a rotating flange under the glass for timing the dive, an extension in the strap to fit over a diving suit and a power reserve of forty-two hours. It needed neither a screw-down crown nor a helium release valve, and it carried an element of Eterna's own historic diver, the KonTiki.

The end of the licence

In 2011 or 2012, depending on the account, a Chinese group, Haidian Holdings, took over Eterna from the Porsche family's holding company. The licence that tied Porsche Design to Eterna for development, production and distribution was dissolved in the spring of 2014; the announcement came in March. Eterna undertook to continue servicing the Porsche Design watches it had made, and the two companies agreed to keep working together on technical matters. Patrick Kury, Eterna's technical director from 2005 to 2011 and then its chief executive for two years, moved to run the new Porsche Design watch company.

A company of its own

On 24 September 2014 Porsche Design Timepieces AG was entered in the commercial register in Solothurn, with offices on the Biberiststrasse and a share capital of one hundred thousand Swiss francs. It was the first time in forty-two years that the brand had its own watch company. Development, design engineering, the purchasing of components, final inspection, logistics and worldwide service were all to be run from Solothurn, with an assembly line of its own planned from 2015 and an aim of some thousands of watches a year, all Swiss made. In the spring of 2024 the company bought the former Eterna building in Grenchen, built in 1955, and rebuilt it over eighteen months. The company moved its registered seat from Solothurn to Schützengasse 46, Grenchen, the address of the former Eterna building, in September 2025, and the manufactory, with about 3,600 square metres and ten watchmaking benches, opened officially on 19 March 2026.

Timepiece No. 1, 2014

The first two watches of the new company appeared in November 2014: the Timepiece No. 1 in black-coated titanium and the Chronograph Titanium in bare titanium, five hundred of each. Both were automatic chronographs in bead-blasted titanium cases forty-two millimetres across, water resistant to five bar, with matt black dials, white luminous hands and bar indices and a red chronograph seconds hand. The movement was the Valjoux 7750, and the watches were assembled by a company in the Val de Travers while the Solothurn line was built.

The WERK calibres

Since then the brand has named its movements WERK, the German word for works. The WERK 01.140 is a chronometer-certified automatic chronograph with a forty-eight hour power reserve; the WERK 01.240 adds a flyback function; the WERK 01.100 powers the custom-built watches. The calibre named in the specifications is the quickest way to place a modern watch in its family.

Monobloc Actuator

The Monobloc Actuator replaced the two chronograph pushers with a single rocker integrated into the case, drawing on mechanisms from the high-performance engine of the Porsche 911 RSR racing car. By 2018 the collection had grown to include a twenty-four hour Chronotimer in all black, with a titanium bracelet coated in black titanium carbide, and the collection was presented as part of the brand's work with Porsche Motorsport.

1919 Globetimer UTC, 2019

The 1919 collection takes its name from the founding year of the Bauhaus. Its 2019 Globetimer UTC lets the wearer move the local hour forwards or backwards with pushers on the case while the watch keeps running, with a second time zone and a twenty-four hour display. The company's technical director described the pushers as toggle switches on a steering wheel, a translation of car technology to the wrist.

Chronograph 1 at fifty

In January 2022 the brand marked its fiftieth year with the Chronograph 1, 1972 Limited Edition: five hundred pieces in titanium, styled after the original and powered by the WERK 01.140. A second anniversary piece, the Chronograph 1, 911 Edition 50Y, was made in seven hundred and fifty pieces with the flyback WERK 01.240. An all-black Chronograph 1 followed later as a numbered series of no more than one thousand pieces a year. The same year the Porsche Museum in Stuttgart opened an exhibition on the fifty years of the studio, on 18 January 2022.

Custom-built Timepieces

The newest idea lets a buyer configure a Chronograph 1 or a related model much as one configures a car, choosing case finish, dial ring colours from more than a hundred and fifty, hands and strap. The configuration is ordered through a Porsche Centre, the watch is assembled in Switzerland with the chronometer-certified WERK 01.100, and delivery takes some twelve to eighteen weeks.

Who made what

The dial signature and the movement are the two surest guides to the period of a Porsche Design watch. The table sets out the four makers, with the watches most associated with each.

The design language

The founder put his rule in a sentence: design must be functional, and functionality must be translated visually into aesthetics, without gags that have to be explained first. The watches follow it more closely than most design-house watches follow anything.

Black as a working colour

Black was chosen for legibility before it became a style. A matt case does not throw reflections into the eye, and white marks on black are read fastest. The same reasoning lies behind the pilots' chronographs in our Navitimer guide and the German military chronographs described in our guide to Tutima; the Chronograph I took it furthest by blacking out the case as well as the dial.

Titanium

In the 1970s and 1980s titanium was rare, costly and hard to work, used mainly in aerospace. The brand put it on the wrist in 1980 and has returned to it in nearly every period since, from the Ocean 2000 to the anniversary chronographs. Titanium is light and non-magnetic, which mattered greatly to the navy's mine divers.

Pushers, bracelets and integration

The house dislikes parts that stick out. Pushers sit flush in the case, bracelets on the titanium watches run straight on from the case, and on the Monobloc Actuator two pushers became one rocker. The watches look like parts of a single machined object, which was the founder's intention.

Names from the car

The later watches are named after car components: Dashboard, Flat Six, Monobloc, Actuator, Indicator. The naming is a reminder that the dial of the Chronograph I began as the instrument panel of the 911. Anyone who has compared that dial with the Speedmaster will see two answers to the same problem of reading time at speed. Instrument design of this kind still shapes newer houses, as our Bell & Ross guide shows.

Reading a reference

Porsche Design reference systems changed with each maker. The table shows the forms a collector is most likely to meet and what each tells you.

On vintage pieces the reference is usually engraved on the caseback, and on Eterna-period watches it is printed in the guarantee papers as well. When the number on the back and the dial on the front point to different periods, a part has been replaced.

Beyond the wrist

The studio was never a watch house alone. In 1978 it produced sunglasses for pilots, the P'8478, with lenses that could be changed in seconds; our guide to designer sunglasses places them among the great frames of the period. A flexible ballpoint pen followed in 1999 and an aluminium monobloc mobile phone in 2007, and the name has appeared on professional kitchen knives. The watches remain the products closest to the founder's first idea.

Other car houses have lent their names to watches, often through licences that gave the watch little more than a badge. Our Tonino Lamborghini guide follows one of them. Porsche Design differs in one essential: the watches were drawn by the man who drew the car.

The Japan thread

Japan came to Porsche Design through the car. The watches followed the 911 into Japanese showrooms and later found shops of their own, department-store counters and, in recent years, editions made with Japanese buyers in mind.

Ginza, November 2005

In October 2005 the brand awarded master franchise agreements for Asia and the Middle East to the Swiss trading group DKSH, which had worked with luxury houses in Asia for a century and a half, naming Japan among the markets it would strengthen. The first Japanese shop opened in Tokyo's Ginza district on 11 November 2005: two hundred square metres on a prime street, fitted with the brand's Gate to the Future concept of screens and a slate scanning table that played a film about any product placed on it. Ginza has been the heart of watch retail in Tokyo for more than a century, as our guide to Ginza and the watch explains, and the choice of street said what the brand wanted to be in Japan.

Department-store salons and Porsche Centres

Modern Porsche Design watches reach Japanese buyers through three doors: specialist watch retailers, the watch salons of the great department stores, among them Mitsukoshi and Isetan, and the Porsche Centres that sell the cars. The last of these is unusual for a watch brand and follows from the origin of the Chronograph I, which was itself first offered in Porsche showrooms.

The Ice Race edition, 2023

The Grand Prix Ice Race at Zell am See, the studio's home town, was first held in 1952 in memory of Ferdinand Porsche, who had died a year earlier. It ended after an accident in 1974 and was revived forty-five years later, with Porsche Design as timekeeper. The fourth watch named after it, the Chronograph 1, GP 2023 Edition, was a flyback chronograph in titanium, forty point eight millimetres across, water resistant to ten bar and limited to two hundred and fifty pieces. It was the first of the series made for buyers worldwide, and it went on sale in Japan on 1 February 2023.

The Tokyo edition, 2024

In July 2024 the brand presented in Tokyo a Chronograph 1 made with an American watch publication: three hundred and fifty pieces worldwide, of which one hundred and fifty were allotted to Japan. The case was titanium with a black titanium carbide coating, forty point eight millimetres across and fourteen point one five thick, water resistant to ten bar, and the movement was the WERK 01.140 with twenty-five jewels and a forty-eight hour power reserve. The dial kept the classic layout of the original, with the thirty-minute counter at twelve, small seconds at nine and the twelve-hour counter at six, and its day disc was printed in both Japanese and English. It is the clearest case of a Porsche Design watch made with Japan in mind.

Custom-built in Japan

From 2025 Japanese buyers have been able to order Custom-built Timepieces through the Porsche Centres, configuring a chronograph as they might configure a 911. The watches are assembled in Switzerland and delivered some three to four months later.

The vintage pieces in Japan

Japanese collectors have documented the IWC-period watches with particular care, recording the generations of the Ocean 2000 down to the shape of the bracelet pins. Watches that have spent their lives in Japan tend to come with their boxes and papers, a habit our essay on how Japan cares for watches describes, and Japanese condition grades, explained in our guide to condition ranks, give a reliable first reading of wear.

Timeline

Video: fifty years of Porsche Design

The brand's own film of its fiftieth-anniversary exhibition at the Porsche Museum walks through the studio's work from the Chronograph I onwards. It shows the watches beside the sunglasses, pens and other objects that came from the same drawing boards, which is the best way to see how consistent the language has been.

Where records disagree

Several dates in the Porsche Design story are told differently in different records. We set them out here and leave open what the evidence leaves open.

When Orfina's role ended

One account has the Orfina connection ending in 1978, when IWC arrived. The fuller archive of the Orfina references shows the Lemania chronographs 7176 and 7177 in production until 1991, when the partnership formally ended. Both can be true: IWC made the new designs from 1978 while Orfina went on making the Chronograph I. We use 1991 for the end of the partnership.

When the IWC years ended

The agreement signed in March 1978 was meant to run for twenty years, which would take it to 1998. Most histories give the end of 1997, and the Eterna collection appeared in 1998. We use 1997.

When the family bought Eterna

Swiss reporting from 2014 dates the purchase of Eterna by the founder's holding company to 1995, three years before the first collection. A brand history written later places the purchase after the end of the IWC partnership. We use 1995 and note the other version.

When Eterna left the family and the licence ended

Reporting from 2014 says Haidian Holdings replaced the family's company as owner of Eterna in 2011. Other histories give 2012, the year the founder died, for both the sale and the end of the relationship. The licence itself was dissolved in the spring of 2014, and the announcement was made in March of that year. We separate the two events: the sale of Eterna in 2011 or 2012, the end of the licence in 2014.

When the Ocean 2000 appeared

Some accounts date the Ocean 2000 to 1982, and others to the Basel fair of 1983 or to a design of 1983. We give both years.

Was the Chronograph I the first all-black watch of its kind

The claim that the Chronograph I was the first all-black chronograph is made by the brand and repeated widely. We have found no earlier all-black automatic chronograph in the records we consulted, but firsts in watchmaking are hard to prove, and we present the claim as the brand's.

A sceptic's view

A design house that does not make its own watches invites a fair question: what exactly is one buying? For the Orfina and IWC years the answer is a watch made by a capable Swiss firm to a drawing of unusual quality. For the Eterna years it is a larger, more technical watch from a company the family owned. Since 2014 it is a watch developed and assembled by the brand itself. Each is honest in its own terms, and none should be confused with the others.

The coatings are the weak point of the early watches. Powder coat and early PVD wear through at the edges, and refinishing a black case is a delicate job that can leave it looking new and wrong. The Lemania chronographs that Orfina made under its own name after 1991 resemble the Porsche Design pieces closely, and a watch with a replaced dial can pass for the real thing at a glance. And the modern anniversary editions, while handsome and well made, are numbered in the hundreds and thousands; they are a different kind of object from the IWC Compass Watch or a first-generation Chronograph I.

None of this diminishes the work. The Chronograph I, the Compass Watch, the Titanium Chronograph and the Ocean 2000 are among the most original watch designs of their decades, and they were drawn by a car designer who took the instrument panel seriously.

Checks for collectors

Each period of Porsche Design has its own weak points. These are the checks we make first.

Read the signature and the reference

Match the dial signature to the caseback reference and to the movement. A dial reading Porsche Design by IWC belongs with an IWC reference and calibre; a 7176 or 7177 caseback should hold a Lemania 5100; an Eterna-period watch should match its P' family and its full reference. A mismatch usually means a replaced part.

Look at the coating

On the Orfina watches and early IWC pieces, expect wear at the edges of the case and the bracelet. Even wear is honest; a perfect black finish on a watch of the 1970s should prompt questions about refinishing.

Open the compass

On a Compass Watch, lift the hinged case and check that the compass needle moves freely and settles on north, and that the hinge closes firmly. Compass parts are hard to replace.

Check the bracelet

On the Ocean 2000, the first-generation bracelet was prone to failure and is often found replaced by a later one. Titanium bracelets of the IWC period are integral to the design, and a watch without its bracelet loses much of its point.

Test the chronograph

Start, stop and reset the chronograph several times. On Lemania 5100 watches check that the central minute hand jumps cleanly, and on modern flyback watches that the flyback resets and restarts in one movement.

Keep the set

For the limited editions of the Solothurn years, the numbered caseback, the box and the guarantee card are part of what makes the watch what it is; our guide to the full set of box and papers explains why. For any watch shipped from Japan, our guide to import duties on goods from Japan explains what to expect at the border, and our authenticity guarantee sets out how we check what we sell.

The pieces we hold are on our collectible watches shelf. If you are looking for a particular Porsche Design reference, an IWC-period Compass Watch or Ocean 2000, or one of the Japanese allocation of the Tokyo edition, our Hunting Salon will search for it in Japan.

Frequently asked questions

Further reading

References

Zurück zum Blog

Hinterlasse einen Kommentar

Bitte beachte, dass Kommentare vor der Veröffentlichung freigegeben werden müssen.