Graham Watches: The Chronofighter, the London Maker and Japan
A London clockmaker of the 1700s, a Swiss engineer of the 1990s and a chronograph started by the thumb
George Graham never made a wristwatch. He was a London clock and instrument maker who died in 1751, was buried with his master Thomas Tompion in Westminster Abbey, and left behind the deadbeat escapement, the mercury pendulum and some of the finest astronomical instruments of his century. In 1995 a Swiss engineer named Eric Loth revived the name in La Chaux-de-Fonds and gave it a modern signature: the Chronofighter, a chronograph started and stopped by a lever under the left thumb. Three decades on, the house is still independent and still family-held, and Japan is one of the places where its oversized chronographs turn up most often and best kept.
In our Watch Almanac of houses, family trees and references, this house belongs with the independents that borrowed an old name and built something new under it. That makes two stories to keep apart: the life of the eighteenth-century craftsman, and the history of a modern company that has carried his name since 1995. The chapters below take them in order, then turn to the movements, the Japanese thread, the reference codes and the checks worth making before buying.
In brief
The essentials come first, each with a date, so that the detail that follows has a frame.
| Fact | Detail |
|---|---|
| Namesake | George Graham, clock and instrument maker, born in Cumberland in 1673, died in London on 16 November 1751 |
| Modern company | Graham SA, entered in the Neuchâtel commercial register on 23 March 1995, based in La Chaux-de-Fonds |
| Founder | Eric Loth, mechanical engineer, formerly with Rado and the Swatch Group |
| Signature | The Chronofighter of 2001, with a start and stop lever on the left of the case |
| Other lines | Swordfish with two magnifying lenses, Silverstone for motor racing, and the Geo.Graham complications |
| Movements | Mostly reworked Swiss chronograph bases with Graham calibre numbers such as G1747 and G1710 |
| Ownership | Private, held by two families, with the founder still on the board |
| In Japan | Imported by DKSH Japan until 2021 and by Cypress Trading of Osaka since then |
The eighteenth-century craftsman
Every Graham watch carries a borrowed biography, so it is worth knowing whose. The man himself was one of the great English makers of his age, and the facts of his life are better documented than most.
A Quaker apprentice
George Graham was born in 1673, probably near Carlisle, the son of George and Isobel Graham. Most records place his birth at Kirklinton in Cumberland. He left for London as a boy of about fifteen, in 1688, to be apprenticed to a clockmaker named Henry Aske. He was a Quaker, and later in life the trade knew him simply as Honest George Graham.
Tompion's partner
In 1695 Graham was admitted to the Clockmakers' Company and went to work for Thomas Tompion, the most celebrated English maker of the age. He married Tompion's niece Elizabeth in 1704, became his partner in 1711, and on Tompion's death in 1713 took over the business at the sign of the Dial and Three Crowns in Fleet Street. That year of 1695 is the one the modern house prints on its dials and in its web address, as the founding date of the name.
The deadbeat and the mercury pendulum
The invention most often tied to his name is the deadbeat escapement for pendulum clocks, which he introduced in his precision regulators around 1715 and which removed the recoil of the older anchor and became the standard for precision clocks. Around 1725 he perfected the cylinder escapement for watches, and in 1726 he introduced the mercury pendulum, which cancelled much of the effect of temperature on a clock's rate. Clocks that combined the two were so accurate that they came to be called regulators. He refused to patent these ideas, so that other makers could use them freely.
Instruments for astronomers
Graham was as much an instrument maker as a clockmaker. He made the great mural quadrant for Edmond Halley at Greenwich and the zenith sector that James Bradley used to discover the aberration of light in 1729. The expedition that went to Lapland in 1736 to measure the shape of the earth was equipped almost entirely with his sextants, theodolites and telescopes. The first orrery, a clockwork model of the sun, earth and moon, was built by James Rowley to his design in 1713 for Charles Boyle, Earl of Orrery, which is how the instrument got its name.
Harrison, the Royal Society and the Abbey
Graham was a Fellow of the Royal Society and Master of the Clockmakers' Company in 1722. When John Harrison arrived in London with his plans for a marine timekeeper, Graham lent him money without security or interest and later spoke for him to the Board of Longitude. He died at his home in Fleet Street on 16 November 1751 and was buried in Tompion's grave in the nave of Westminster Abbey. The stone was one of the few originals kept when the nave was re-paved in 1835, and its re-cut inscription still calls his inventions an honour to British genius and his work the standard of mechanic skill.
Whose curious inventions do honour to ye British genius: the words cut on the grave George Graham shares with Thomas Tompion in Westminster Abbey
A name revived in 1995
The modern Graham is not a continuation of the Fleet Street workshop. It is a Swiss company founded in the mid-1990s, which bought the right to use an old name and built its own identity under it.
An engineer from Le Locle
Eric Loth grew up around watchmaking: his father taught at the engineering school of the canton of Neuchâtel, and the family moved to Le Locle in 1962. He trained as a mechanical engineer and began in watches at Rado in Grenchen, which French speakers call Granges, where he worked on ceramic materials and sapphire welding. From there he became head of product development for the brands of the Swatch Group. By his own account, the wish to run a whole house of his own outgrew any ambition to manage someone else's.
The rights and the register
In 1994, with a few partners, Loth acquired the rights to use George Graham's name for a line of Swiss watches. Graham SA was entered in the commercial register on 23 March 1995, with the stated purpose of using the trademarks it holds in the names of English master watchmakers of the seventeenth and eighteenth centuries. The founder looks back on 1995 as a year of a few watches, and dates the real start to 2000, when the house first showed at the Basel fair. The house itself describes the revival as the work of a group of Swiss and British enthusiasts.
A family of British names
Graham was not the only old English name revived by the same circle. Loth also brought back Arnold & Son and Tompion, after Graham's master, and later created smaller family labels of his own. Graham and Arnold & Son sat together in a group called The British Masters; in 2012 Arnold & Son and the movement maker La Joux-Perret passed to the Japanese group Citizen, whose own story is told in our guide to vintage Citizen watches. Graham stayed independent.
The first achievement
The first piece the house claims as its own achievement was a split-seconds chronograph with a foudroyante hand, which divides each second into eighths. The founder describes it as a world first for a watch of that kind, a claim worth reading as the house's own. It set the tone for what followed: chronographs with an unusual control or display, rather than another round dress watch.
The Chronofighter and its trigger
The model that made the name is the Chronofighter, presented in 2001. Its idea is simple: move the start and stop control from the usual pusher beside the crown to a large lever on the left of the case, worked by the thumb.
Bomber pilots' timers
The inspiration came from timers of the 1930s and the Second World War, made for bomber crews who wore thick gloves and could not press a small pusher in flight. One such instrument, a 52mm time recorder made by Universal Genève for the Italian air force, combined the crown and the pusher in a single control worked by the thumb. Loth has explained that he admired the crown-protecting lever of the Italian divers' watches covered in our Panerai guide, but wanted his lever to do something. It became a trigger.
The thumb, not the finger
The house argues that the thumb is the fastest finger of the hand, faster than the index finger that works a conventional chronograph. It also links the lever to its namesake, who fitted a precision clock with a lever to start and stop timing for astronomical work. Three patents are associated with the Chronofighter lever. The same pilots' heritage runs through our study of the Breitling Navitimer, though there the answer to flying was a slide rule rather than a trigger.
From 43 to 47 millimetres
The first Chronofighter measured 43mm across, not counting the lever, at a time when most men's watches were well under 40mm. It ran on an automatic chronograph certified by the official Swiss chronometer testing body, numbered calibre 1722. The lever sat at nine o'clock with a separate reset pusher at ten, and the screwed back was engraved with the symbol of The British Masters, the group the house then belonged to. In 2006 the Oversize took the case to 47mm with harder angles, and it spawned a GMT and a first diver's version with a rotating bezel and a helium valve. The RAC Trigger of 2008, at 46mm, was the variant whose crown sat outside the lever's guard.
Silver, divers and the Vintage
The Chronofighter 1695 of 2011 to 2012 was the most classical of the family: a 42mm case in sterling silver with a Roman numeral dial and the Royal Observatory at Greenwich engraved on the back. The Prodive of 2012, at 45mm, was patented as the first chronograph in which the trigger drives a monopusher, and was made to work at depth. For the model's fifteenth anniversary in 2016, the Chronofighter Vintage brought the case down to 44mm, with softer lines, an onion crown and a mushroom-shaped reset pusher. The Grand Vintage of 2018 returned to 47mm on the same design.
Superlight carbon
The house dates its first Superlight chronograph, with moulded carbon components, to 2004. A later Oversize Superlight made for the Isle of Man races used a composite flecked with carbon nanotubes and weighed under 100 grams, despite its size. Bold materials of this kind are a thread worth comparing with our Hublot guide, where the 2005 Big Bang made fusion of materials its whole argument.
The thumb is the fastest finger of the hand: the founder's case for putting a chronograph lever on the left of the watch
The founder on film
The interview below, recorded at the Basel fair, has Eric Loth explaining the house in his own words; it is a useful companion to the chapters on the trigger and the racing years.
Swordfish and Silverstone
Two other lines give the house its range: one built around a pair of lenses, the other around motor racing.
Two magnifying eyes
The Swordfish puts two domed sapphire lenses over the chronograph counters, enlarging them by about a fifth and giving the dial a pair of staring eyes. The name is usually explained by the fish itself, a hunter able to warm its eyes for sharper sight in cold water. Japanese material instead links it to a Royal Navy submarine, which fits the porthole look of the lenses. The founder holds that the eyes have a real optical purpose rather than a decorative one.
Withdrawn, then revived
The Swordfish sold well enough to be copied widely, and the house eventually withdrew it from the catalogue. It returned in 2019 in 46mm cases of steel and bronze, the first bronze watches the house had made, alongside a bronze Chronofighter. The bronze version uses a marine alloy of copper and tin with a titanium back, and runs on calibre G1710, an automatic chronograph with its hour and minute counters set one above the other on a vertical axis.
Silverstone and the track
Loth races himself, in the Porsche Cup in Switzerland, and in 2002 he named a racing chronograph after the British circuit at Silverstone. Its dial borrowed motifs from cars, such as brake discs and tyre treads. The house has backed motor sport since 2009 and kept time at a historic Swiss hill climb in 2016 and 2017. For the older motor-racing chronographs that set this whole genre going, our TAG Heuer guide covers the Carrera and the Monaco.
Formula One and the Isle of Man
Graham became timing partner to Brawn GP in the middle of the 2009 season, the year that team won both world titles, and issued eight Brawn GP editions of the Chronofighter and Silverstone. It stayed on when the team became Mercedes in 2010. In 2012 the house left Formula One. It later timed the Isle of Man TT motorcycle races, which inspired a run of themed Chronofighters.
The grand complications
Beside the sports chronographs, the house has made a short run of very complicated pieces, most of them under the Geo.Graham label. They are rarely seen, but they explain how the house wants to be read.
King George
The King George of 2003 was a minute repeater with four hammers and a grande sonnerie, which also chimed when the chronograph started and stopped. It linked the house's two themes, sound and timing, in a single movement.
Tourbillograph
The Tourbillograph of 2009 combined a chronograph with a visible tourbillon, and later versions appeared in the Silverstone and Chronofighter Superlight families. One Silverstone Tourbillograph used a tourbillon cage of ruthenium, a metal of the platinum group, fully open on the dial. A Trackmaster Tourbillograph also opened the house's Formula One editions.
The orrery on the wrist
The most ambitious piece was the Tourbillon Orrery, shown in 2013, with a movement made for the house by the specialist Christophe Claret and a limited run announced at 20 pieces. It shows the sun, earth, moon and Mars on the dial, a nod to the orrery built to George Graham's design three centuries earlier. A revised Geo.Graham Orrery Tourbillon of 2017, in a 48mm pink gold case, used turquoise for the earth and fragments of meteorites for the moon and Mars. The house dates the Orrery to 2012, a year earlier than its first showing in the press.
Movements and their bases
Graham gives its movements its own calibre numbers, but most of them start life as a Swiss chronograph base that the house then reworks. The founder has described using an evolution of the Valjoux base prepared by the specialist Concepto, as well as Sellita developments, and changing between 10 and 80 per cent of the base to suit the layout of the Chronofighter. He also called the Valjoux a reliable base that is easy to service, which is why the house built on it. The table sets out the main calibres seen in recent catalogues.
| Calibre | Type | Where it appears |
|---|---|---|
| G1722 | Automatic chronograph, chronometer-certified | The first Chronofighter of 2001 |
| G1747 | Reworked Valjoux 7750 automatic chronograph, crown on the left | Chronofighter Oversize and Superlight models |
| G1710 | Automatic chronograph, counters on a vertical axis | Swordfish bronze and steel |
| G1733 | Automatic chronograph with a second time zone | GMT versions of the Chronofighter |
| G1750 | Automatic monopusher chronograph | Chronofighter versions worked by the trigger alone |
| G1796 | Chronograph with tourbillon | Tourbillograph models |
The Chronofighter Vintage puts the familiar Valjoux layout through a deliberate change, moving the counters so that the dial reads differently from the many other watches built on the same base. Most of these movements beat at 4Hz with about 48 hours of reserve. For comparison with a calibre designed from scratch, our Zenith guide follows the El Primero, and our study of the Seiko 6139 covers the Japanese automatic chronograph of 1969.
Why the base matters to a buyer
A reworked Valjoux is not a weakness in itself. It means that a competent chronograph workshop can service the core of the watch, while the parts that make it a Graham, such as the trigger, the reset pusher and the left-hand crown, are specific to the house. The practical question is therefore not who made the base, but whether the specific parts are present and working.
Wearing a left-handed case
Because the crown, lever and reset pusher sit on the left, they face away from the back of the hand when the watch is worn on the left wrist. Even wearers who find right-hand crowns uncomfortable on large watches may have no such trouble with a 47mm Oversize.
Running an independent
Graham is a small company, and its history since 1995 is that of an independent finding its size.
The founder steps back, then returns
In October 2010, after fifteen years in charge, Loth handed day-to-day running to a management team led by the chief operating officer Ivan Dupraz, with William Asprey as chairman of the board. The board expected 2010 to be a record year. He soon took the controls again, explaining that he had understood the need to be more present in the markets himself.
Size and staff in 2012
In 2012 the house employed 35 people in La Chaux-de-Fonds and relied on outside specialists for parts, including Sellita for movements. It had raised fresh capital after the crisis of 2008 and 2009, and kept any single region, from Greater China to the United States and the Middle East, below about 15 per cent of its trade. The founder was frank that without Sellita some brands would no longer make a single watch.
A British subsidiary
In 2014 the house set up its own British company to look after the United Kingdom, after its former distributor there went into administration. Britain was a natural market for a name taken from a London maker.
Two families today
The house describes itself as an independent watchmaker owned by two families, with a second generation now at work in the business. The register shows Eric Loth and William Asprey on the board, and a share capital of eight million francs. The registered address is now in the centre of La Chaux-de-Fonds, after many years on the Boulevard des Eplatures. In 2026 the house marked the Chronofighter's twenty-fifth year with an anniversary Vintage.
We change between 10 and 80 per cent of the base calibre: the founder on what it takes to fit a Swiss chronograph to the Chronofighter
Timeline
The dates below join the eighteenth-century craftsman to the modern company.
| Year | Event |
|---|---|
| 1673 | George Graham born in Cumberland |
| 1695 | Graham free of the Clockmakers' Company and working for Tompion |
| 1713 | Takes over the Tompion business; first orrery built to his design |
| c.1715 | Deadbeat escapement in his precision regulators |
| 1726 | Mercury pendulum |
| 1751 | Dies in Fleet Street; buried in Westminster Abbey |
| 1994 | Eric Loth and partners acquire the right to the name |
| 1995 | Graham SA registered in La Chaux-de-Fonds |
| 2000 | First showing at the Basel fair |
| 2001 | Chronofighter, 43mm |
| 2002 | Swordfish and Silverstone, by the house's account |
| 2003 | King George minute repeater |
| 2004 | First Superlight carbon chronograph |
| 2006 | Chronofighter Oversize, 47mm |
| 2009 | Tourbillograph; Brawn GP partnership |
| 2010 | Mercedes GP partnership; founder hands over daily running |
| 2012 | Prodive; Arnold & Son sold to Citizen; Graham leaves Formula One |
| 2013 | Tourbillon Orrery shown |
| 2016 | Chronofighter Vintage, 44mm |
| 2019 | Swordfish returns; first bronze watches |
| 2021 | New Japanese importer and Japanese website |
| 2026 | Chronofighter twenty-fifth anniversary |
The Japanese thread
Japan has taken Graham's big chronographs seriously from the early years, and the paper trail of its importers is clear. That matters for a buyer, because a Graham bought new in Japan usually came with a Japanese guarantee card and the full box, and was often kept with the care described in our essay on how Japan keeps watches in the box.
The DKSH years
For many years the house was imported by DKSH Japan, the Japanese arm of the Swiss trading group. At least one Osaka specialist gave the brand a dedicated corner in that period, before stopping for a time. In Japan the Chronofighter was presented in that era with a story of bomber pilots in thick gloves, worked by the thumb in flight, which is the same story the house tells today.
Cypress Trading since 2021
In the summer of 2021 the Japanese import passed from DKSH Japan to Cypress Trading, a company based in Osaka. The same importer also handles several other independent European houses, including De Bethune, Mühle-Glashütte and Meistersinger. A Japanese-language website for the house opened on 15 July 2021, and the Osaka specialist began stocking it again at the end of October that year.
Where the watches are shown
Today the house lists around two dozen addresses across Japan, from Hokkaido to Okinawa, with a cluster in Fukuoka and several in Osaka and Hiroshima. Many of them are watch salons inside department stores, the setting described in our portrait of Ginza and its watch houses. The Japanese site carries the house's statement in full, closing with the belief that George Graham himself would be proud of the work.
What turns up in Japan
Pre-owned Grahams in Japan run across the whole catalogue: Chronofighter Oversize and Vintage models, Superlight carbon skeletons, titanium Oversize pieces, Silverstone racing models, numbered Mercedes GP editions and both generations of the Swordfish. Many come with the original inner and outer boxes and the guarantee, and some are unworn. Original boxes, trade catalogues from 2007 and 2008 and even counter display stands also appear on their own. The wider reasons Japan is such a good place to find a well-kept watch are set out in our essay on why Japan leads for pre-owned luxury.
George Graham himself would be proud, we believe: the house's own closing words to its Japanese readers
Reading a reference
Graham reference numbers look cryptic, but they follow a pattern that can be read with practice. The first block begins with the figure 2, followed by two letters for the line, then further letters for the version and the case metal; after the dot comes a letter for the dial colour and a number, and a third block, where present, codes the strap. The table shows prefixes seen in recent catalogues and on watches found in Japan.
| Prefix | Line | Example |
|---|---|---|
| 2CV | Chronofighter Vintage and Grand Vintage | 2CVAS.B03A, steel, black dial |
| 2CC | Chronofighter Oversize, including Superlight carbon | 2CCBK.B11A, Superlight |
| 2OV | Chronofighter Oversize, including GMT and titanium | 2OVGS.B26A, GMT; 2OVKT, titanium |
| 2CR | Chronofighter RAC Trigger | 2CRBS.B10A |
| 2SX | Swordfish of 2019 onwards | 2SXAK.B02A, bronze; 2SXAS.B05A, steel |
| 2SW | Earlier Swordfish | 2SWAS.B17A |
| 2ST and 2BL | Silverstone racing models | 2STBC.B05A; 2BLDZ.B12A |
| 2ME | Mercedes GP editions | 2MEBS.B02A |
| 2GG | Geo.Graham complications | 2GGBP.U01A, Orrery Tourbillon |
Dial and metal letters
After the dot, B usually means a black dial, G green, U blue, S silver and W white. In the first block a final S usually marks steel and a final K bronze or carbon, while a T in the Oversize prefix appears on titanium cases. Treat these as habits rather than rules, and confirm a reference against the case back and the papers.
The guarantee and service record
The house gives a two-year international guarantee against manufacturing defects and asks that servicing be done only by its own approved centres or agents, who stamp a maintenance page in the guarantee booklet. It recommends a water-resistance test every two years. A stamped booklet is therefore worth asking about, alongside the box and papers covered in our guide to the full set.
Where records disagree
Some facts about the man and the company are told in more than one way. The table shows where the records part company and which reading we follow.
| Question | One account | Another account | Our reading |
|---|---|---|---|
| Graham's birth | Kirklinton, Cumberland, 7 July 1673 | Probably 1673, near Carlisle, or possibly 1675 | Cumberland, 1673, with the day uncertain |
| Who invented the deadbeat | George Graham, around 1715 | Richard Towneley and Tompion earlier, with Graham popularising it | Graham made it the standard; the first idea may be older |
| The first chronograph lever | A start and stop lever fitted by Graham in 1710 | Japanese house material dates it to 1725 | An early stop mechanism, with the date unsettled |
| Founding year | 1695, printed by the house | 23 March 1995, in the commercial register | 1695 is Graham's year at Tompion's bench; the company dates from 1995 |
| First Swordfish | 2002, in the founder's own account | 2004, in the trade press | Between 2002 and 2004; we print the house date with care |
| Swordfish name | The fish with heated eyes | A Royal Navy submarine | The fish, which matches the house's optical argument |
| The Orrery | 2012, in the founder's own list | Shown in 2013 | Announced around 2012, shown in 2013 |
| Oversize second generation | Headed 2012 in one feature | Presented in 2017, in the same text | 2017, the date given in the text itself |
George Graham is sometimes credited with a detent escapement and called the first watchmaker admitted to the Royal Society; neither claim holds up, and we leave both out.
A sceptic's view
A fair study has to put the hard questions as well as the good story.
A borrowed lineage
The modern house has no line of descent from the Fleet Street workshop. It holds a trademark in an old name and has built a modern company under it, as several revived houses have done; the case of an eighteenth-century name brought back to life is examined in our Breguet guide. The 1695 on the dial is the year George Graham began work for Tompion, not a founding date of the company that makes the watch.
The father of the chronograph
The house calls its namesake the father of the chronograph, on the strength of a start and stop lever on an astronomical clock. That device measured short intervals, but it was far from the wristwatch chronograph of the twentieth century, and even its date is given differently in the house's own material. The link to the Chronofighter's trigger is a fair homage rather than a technical ancestry.
Bases, not manufacture
Most Graham chronographs are built on reworked Swiss bases rather than movements designed in-house. The founder has never hidden this, and the work involved in moving the controls to the left is real. The independents of the same decade, discussed in our Franck Muller guide, faced the same choice between building and adapting.
Size and taste
The Chronofighter is large, and the lever adds to its width, so the watch suits some wrists and overwhelms others. The 44mm Vintage was itself a response to that. Those who like bold instruments of this kind may also compare the square cases in our Bell & Ross guide.
Before you buy
The checks below apply to any pre-owned Graham, whether a Chronofighter, a Swordfish or a Silverstone.
Work the trigger
The lever should start and stop the chronograph crisply and without play, and the reset should return every hand to zero. A sticky or loose lever points to wear or damage in the parts that are specific to the house.
Match the reference
Compare the reference on the case back with the guarantee card and the dial, using the pattern set out above. Numbered editions, such as the Brawn GP and Mercedes GP pieces, should carry their number on the case.
Look for the lenses
On a Swordfish the two domed lenses should be clear and free of chips, since they are the whole point of the design. Given how widely the first Swordfish was copied, choose one only with its papers and from someone able to stand behind it.
Check the case material
Carbon and composite cases do not polish like steel, and bronze darkens with age, which some owners welcome and others remove. Our guide to Japanese condition ranks explains how such wear is graded.
Ask about service
Ask when the watch was last serviced and whether the maintenance page in the booklet is stamped by an approved centre. A Japanese guarantee card, the full box and a service record all add to the case for a particular watch. Our authenticity guarantee sets out how we check each piece.
Questions
Is the modern company linked to George Graham?
Not by descent. It is a Swiss company founded in 1995 that holds the right to use his name.
Why is the trigger on the left?
So that the thumb, which the house holds to be the fastest finger, can work the chronograph, a habit borrowed from bomber crews' timers.
Who makes the movements?
The house reworks Swiss chronograph bases, chiefly from the Valjoux family and from Sellita, and gives them its own calibre numbers.
Which Chronofighter is the most wearable?
The Vintage of 2016, at 44mm, is the smallest of the modern trigger models; the 1695 of 2011 was smaller still, at 42mm.
When did the Swordfish come back?
In 2019, in 46mm steel and bronze cases.
Who imports Graham into Japan?
Cypress Trading of Osaka, since the summer of 2021, after many years with DKSH Japan.
Can a Graham be brought home from Japan?
Yes: our explanation of otoriyose sets out how a piece is found and sent, and our otoriyose page is the place to ask for a particular reference.
The name and the watch
The house has carried George Graham's name for three decades, and its best idea, a lever under the thumb, owes as much to bomber pilots as to an astronomer's clock. For the wider landscape of chronographs worth owning, our Omega Speedmaster guide sets a classic beside it, and our guide to collectible watches places all of them in context. Watches we have found in Japan are gathered in our collectible watches collection.
Further reading
- Watch Almanac: houses, family trees and references, for where this house sits among the independents.
- Panerai's Radiomir and Luminor, for the crown-protecting lever that set the founder thinking.
- Heuer's Carrera, Monaco and Autavia, for the motor-racing chronograph before Silverstone.
- The collectible watches shelf, for the watches we hold now.
- Otoriyose, for a piece you have seen in Japan.
References
- History (maker’s history page)
- Values (maker’s statement of ownership and values)
- Chronofighter Vintage 25th anniversary and founder’s statement (maker’s page, 2026)
- Warranty (maker’s guarantee terms)
- Reference guide 2019 (maker’s catalogue of references and calibres)
- About Graham (Japanese) (Japanese importer’s brand page)
- Graham Japanese website opens (Japanese) (Japanese importer’s notice, 15 July 2021)
- Stockists in Japan (Japanese) (Japanese importer’s store list)
- Cypress Trading (Japanese) (Japanese importer’s home page)
- Graham coming soon (Japanese) (Osaka specialist’s notice, October 2021)
- Graham brand profile (Japanese) (Japanese watch magazine)
- Graham SA (Swiss commercial register extract)
- George Graham (Westminster Abbey biography)
- George Graham (clockmaker) (encyclopaedia entry)
- George Graham (Fondation de la Haute Horlogerie encyclopaedia)
- The Graham escapement (university physics notes)
- George Graham (Linda Hall Library scientist of the day)
- Graham (watch encyclopaedia entry, 2015)
- Eric Loth interview (watch magazine interview)
- The timekeeping legacy that triggered the birth of Graham watches (watch magazine feature with the founder)
- Graham profile (Portuguese) (watch magazine visit and interview)
- Graham leaves Formula One (French) (Swiss newspaper, March 2012)
- Eric Loth changes role (watch magazine, October 2010)
- Graham 1695 establishes UK subsidiary (watch trade news, March 2014)
- Citizen of Japan acquires La Joux-Perret and Arnold & Son (watch magazine, 2012)
- Graham Chronofighter chronograph (watch magazine specification sheet, 2001)
- The Graham Chronofighter and its unique trigger explained (watch magazine, November 2018)
- Graham Chronofighter Oversize Superlight TT review (watch magazine review)
- Graham Chronofighter Oversize second generation hands-on (watch magazine)
- Graham Chronofighter Vintage review (watch magazine review)
- Graham Chronofighter Oversize review (watch magazine review)
- Against the current (watch magazine on the Swordfish, August 2019)
- Graham today (watch magazine profile, 2020)
- 2019, the year of bronze (watch magazine, October 2019)
- Graham Silverstone Tourbillograph (watch magazine, February 2013)
- Graham Geo.Graham Orrery Tourbillon (watch magazine, February 2017)
- Graham and motor sport (watch magazine feature)
- New partnership with Brawn GP (watch magazine, June 2009)
- Partnership with Mercedes GP Petronas (watch magazine, February 2010)