Victorinox Watches: Swiss Army, Wenger, I.N.O.X. and Japan
A cutler in Ibach, a distributor in Connecticut, a rival in Delémont and a quartz field watch that outlived its own torture tests
Victorinox came to the wristwatch late, in 1989, and from the side door: an American partner put the knife’s red shield on a plain field watch and found that people wanted it. Thirty-five years later the house builds its own watches in Switzerland, has absorbed its old knife rival, and sells a quartz watch that survived being run over by a tank. This guide explains how the names on the dial changed, which lines matter to a collector, and how to read a piece found in Japan.
At a glance
| Item | Detail |
|---|---|
| House | Victorinox AG, Ibach, canton of Schwyz, Switzerland; founded 1884 by Karl Elsener |
| Name | Victoria, after the founder’s mother, joined in 1921 with inox, the French short form for stainless steel |
| First watches | 1989, in North America, sold as the Swiss Army Brand Watch through the American distributor |
| Dial names | Swiss Army; Victorinox Swiss Army; Victorinox |
| Rival absorbed | Wenger of Delémont, bought in 2005; its knives folded into Victorinox in 2013 |
| Japan | Victorinox Japan, founded 1993, the group’s first own sales company |
| Best-known watch | I.N.O.X., shown in March 2014, put through 130 tests |
| Watch base | Watch competence centre, Delémont, built 2016 |
Victorinox watches: the short answer
Victorinox is a knife company that learned to sell watches before it learned to make them. The first dials, in 1989, said Swiss Army and were sold in the United States by the company that had imported the red pocket knife for decades. The knife maker in Ibach supplied the name and the cross; the American firm supplied the design brief and the shop counters; Swiss factories supplied the cases and the quartz movements. Only in 2002, when Victorinox bought the American firm outright, did the watch business become fully its own. To place the house among the watchmakers proper, start with our watch almanac of houses, family trees and references.
That history explains the dials. A collector will meet three signatures. Swiss Army alone marks the early American pieces and the North American range up to the 2000s. Victorinox Swiss Army marks the joint name used outside North America and, later, everywhere. Victorinox alone, with the cross and shield, marks the modern pieces. Each signature points to a period, and each period had its own priorities.
What has not changed is the brief. A Victorinox watch is meant to be the knife on the wrist: legible, tough, plainly made, honest about its price. It has never tried to be a jeweller’s object. The best of the line, the I.N.O.X. quartz and the Dive Master 500 automatic, are excellent tool watches, and the reasons are worth knowing before you choose one.
Cutlery, then timekeeping
Because the name sold them. The American partner discovered in 1989 that the shield on a red knife carried a promise of usefulness that customers would pay for on a dial. The first watch, a simple model with a large face, big numerals and a black strap, sold twice its projected volume in its first season. Every later Victorinox watch descends from that discovery.
Who this guide is for
It is for the collector who has found a Victorinox or Swiss Army watch in Japan and wants to know when it was made, what is inside it and whether it is worth having. It also serves the buyer weighing Victorinox against the other Swiss names that use military imagery, a crowded and confusing corner of the market that our guide to Swiss Military Hanowa covers from the other side.
Ibach, 1884: a cutler and his mother
Karl Elsener opened a cutler’s workshop in Ibach, in the canton of Schwyz, in 1884. His mother, Victoria, helped him in the early years. Ibach is a small place at the foot of the mountains, part of the municipality of Schwyz, the canton that gave Switzerland its name; the firm is still there, and still in the family.
The soldier’s knife
In the late 1880s the Swiss Army chose a new folding knife for its soldiers. It had to open tinned food and help strip the service rifle, which needed a screwdriver. The design received the official name Modell 1890 in January 1891. The first supply came from Germany, from a Solingen maker, because no Swiss firm could yet make it in quantity.
Elsener set out to change that. In 1891 he helped found an association of Swiss cutlers and, with three fellow members, delivered the first soldier’s knives to the Swiss Army that year. The work nearly ruined him: the German maker could produce the knives at lower cost, and Elsener lost money on every one.
The officer’s knife, 1897
His answer was a better design. In 1896 he worked out a way to put tools on both sides of the handle and hold them with a single spring. The new knife, with a second small blade and a corkscrew, was patented on 12 June 1897 as the Swiss Officer’s and Sports Knife. The army did not adopt it, but civilians bought it, and it is the ancestor of the red knife known everywhere today.
The point for a watch collector is the habit of mind. Victorinox’s founding product was a multi-function tool sold on usefulness and durability, made in small Swiss workshops at a cost that German rivals undercut. Every one of those facts returns in the watch story a century later.
Victoria plus inox: how the house got its name
In 1909 Karl Elsener chose his late mother’s first name, Victoria, as the brand name and registered the cross and shield as a trademark. The emblem is now protected in more than 120 countries, and it is the single most important thing on a Victorinox dial.
Stainless steel, 1921
In 1921 the firm adopted stainless steel for its blades. The French short form for the metal is inox, from inoxydable, rustproof. Victoria and inox together made Victorinox, and the name has stood since. When the house named its toughest watch I.N.O.X. in 2014, it was reaching back to that moment: a material chosen because it would not fail.
A family company that stayed one
The workshop passed to Carl Elsener II in 1918, who brought in automation and, in 1931, the first all-electric hardening plant in Ibach. Carl Elsener III took over in 1950. In 1979 the family workshop became Victorinox AG. In 2000 the family placed 90 per cent of the shares in the Victorinox Foundation, with the remaining 10 per cent held by a charitable family foundation. Carl Elsener Jr., the fourth generation, has led the group since 2007. There is no outside shareholder to please, and the watch line has been allowed to grow slowly.
“Trust, teamwork, quality work, reflection, courage and respect are the core values of our brand.”Carl Elsener Jr., chief executive of Victorinox, 2014
Shelton, Connecticut: the watch begins in America
The watch was not born in Switzerland. It was born in the offices of the company that had sold the red knife in the United States for decades. That firm began in the nineteenth century as a maker of butcher’s scales in New Britain, Connecticut, founded by Charles Forschner, moved to New York under the founder’s son, and began buying from Victorinox in the years just before the Second World War, when its German cutlery supply faltered. After the war, American soldiers who had seen the Swiss soldier’s knife in Europe created a demand that the firm met through hunting and camping shops. In 1983 it moved back to Connecticut and took the name Forschner Group.
The Swiss Army Brand Watch, 1989
In 1989 the Forschner Group introduced the Swiss Army Brand Watch. It was designed in the United States and made in Switzerland: a plain quartz piece with a large face, big numerals and a black strap. Its American retail price in 1990 was 95 dollars. It sold about four million dollars’ worth in its first season, twice what the company had planned. A subsidiary, Swiss Army Brands Ltd, was formed in Shelton, Connecticut, to carry the watch, sunglasses and other goods that bore the name.
“It has always been known as a useful, utilitarian product and we were able to transfer that to the watch’s image.”James Kennedy, president of the Forschner Group, on the first Swiss Army watch, 1991
The company’s president saw the limits as clearly as the promise. All of its products had to be made in Switzerland, and a strong franc raised his costs every year.
“We have to have all our products made in Switzerland, where the factories are small, inefficient and expensive.”James Kennedy, president of the Forschner Group, 1991
Growth through the 1990s
By 1994 the American watch range ran from 75 to 500 dollars a piece and turned over about 30 million dollars a year. In 1996 the Forschner Group renamed itself Swiss Army Brands, Inc. In the same year the Swiss defence department, which held a trademark containing the words Swiss Army, granted the company the right to use it outside the United States, Canada and the Caribbean. The firm’s advertising of the late 1990s, run under the line “Swiss Army Equipped”, tied the knife, the watch and the sunglasses into one rugged image.
Owning the factory, 2000 to 2002
In July 2000 Swiss Army Brands bought a controlling interest in Xantia SA, a Swiss company that designed and made watches and had come to make most of its watches. By the end of 2001 the range stood at about 30 models in more than 150 variants, from an entry Active collection to a Professional collection, and watches with the other own-name goods made up about 43 per cent of the company’s revenue. The same filing describes the dial names plainly: Swiss Army in North America, Victorinox Swiss Army elsewhere.
In 2001 Victorinox and its American partner set up Victorinox Swiss Army Watch AG in Switzerland. In 2002 Victorinox bought the American company outright. From that point the knife maker owned its watch business from design to distribution, and the long, slow shift from Swiss Army to Victorinox on the dial began.
Delémont: the rival that became a watch base
For more than a century Switzerland had two makers of the army knife. Wenger, in Delémont in the French-speaking Jura, grew out of a cutlery business founded by Paul Boéchat in 1893. In 1908 the army split its order between the two: half to Victorinox in German-speaking Schwyz, half to Wenger in what was then the Bernese Jura. Victorinox called its product the Original Swiss Army Knife; Wenger called its own the Genuine Swiss Army Knife.
Wenger watches before Victorinox
Wenger began making watches in 1988, a year before the first Swiss Army watch. Its dials carried names such as Wenger Swiss Military, and in 1998 it announced a five-year, 40-million-dollar plan to build a global image for its knives and watches. Wenger watches are made in Switzerland and are still sold today; Victorinox kept the Wenger name for watches and travel goods after the takeover.
The takeover, 2005, and the 2013 merger
The airport rules that followed September 2001 hit both knife makers hard, and Wenger worst. In 2005 Victorinox bought its rival. On 30 January 2013 the two announced that Wenger’s knives would be folded into the Victorinox brand, with the Delémont factory still producing them as the Delémont collection. In 2016 Victorinox built a watch competence centre in Delémont, and the town that once made the rival knife now houses the group’s watch work.
For a collector this matters in two ways. A Wenger watch is a cousin, not a counterfeit: legitimately Swiss, legitimately related, but a different line with its own references. And a Victorinox made after 2016 is a product of a dedicated watch centre, not of a knife company dabbling.
The Japan thread: a Tokyo company, 1993
Japan was the first country in which Victorinox set up its own sales company. Victorinox Japan was founded in 1993, four years after the first watch and nine years before the group took over its American partner. Elsewhere the red knife still travelled through partners; in Japan the house chose to stand at the counter itself.
A distributor in Tokyo
Victorinox Japan K.K. is based in Nishi-Azabu, Minato ward, Tokyo, and remains the official importer of the house’s knives, travel goods and watches. Watches reach Japanese buyers through authorised department-store counters and specialist watch shops, and the Japanese trade press has reported new collections from Basel in several seasons. A Japan-imported piece will normally carry the importer’s guarantee card, and the Japanese warranty booklet is part of what makes a full set; our note on why box and papers matter explains how much.
What Japan keeps
Japanese counters favour the quieter Victorinox references, such as the small Alliance models for women. Pieces like these are worn to the office rather than up a mountain, and they tend to survive in good order. The habit of keeping the outer box, the guarantee card and even the spare strap is described in our essay Kept in the box, and it applies to a modest Swiss quartz watch as much as to a gold chronograph.
For a buyer abroad, that is the practical reason to look in Japan. The reasons in general are set out in why Japan is the world’s finest market for pre-owned luxury; for Victorinox, the short version is that a tool watch bought for daily wear in Tokyo was more often looked after than worn out.
Two names on Japanese counters
Because Victorinox kept the Wenger name for watches after 2005, both brands can appear side by side in Japan. They are related and both legitimate, but they are different lines. Read the dial first: the cross in a shield is Victorinox; the cross in a rounded square is Wenger.
The collections: five families to know
The names have shifted over thirty-five years, but five families carry most of the story. Each began with a clear job.
Infantry
The field watch, and the closest thing to the 1989 original: a plain dial, large Arabic numerals, a military-time inner ring, a leather or fabric strap. Infantry is the line that best keeps the “knife on the wrist” idea.
Airboss
The aviator family. The Airboss Mach 6 chronographs of the mid-2000s are the line’s high point: 45 mm cases, 54.5 mm lug to lug, 14.5 mm thick, a black tachymeter bezel and a Valjoux 7750-family automatic chronograph inside. Reference 241447 is the best-known model; the Mach 6 Power Gauge limited edition of 2008, reported at 333 pieces, is rarer still.
Dive Master
The diver. The Dive Master 500 takes its name from its 500 metre rating; the line was renewed in 2010, and its Black Ice versions carry a black PVD-coated steel case. The automatic Mecha version uses the thin, higher-grade ETA 2892-A2 rather than the more common 2824, a choice reviewers at the time found surprising at the price.
Alliance and Heritage
The dress side of the house: slim cases, simple dials, steel bracelets. These are the references most often seen at Japanese counters, and the small Alliance XS for women is still sold in Japan.
I.N.O.X.
The tough watch, introduced in 2014 and treated in full below. It has since become the line that defines the brand, in many later versions, among them carbon and professional diver models.
I.N.O.X.: 130 tests, 2014
Victorinox showed the I.N.O.X. at Baselworld in March 2014. The year mattered: it was the 130th anniversary of Karl Elsener’s workshop and the 25th of the watch division. The house put the watch through 130 tests, thirty of them devised specially, and published the results as the product’s argument.
What the watch survived
A 10 metre drop onto concrete. A 64-ton Swiss Army tank rolling over it, and a 25-ton truck. Two hours in a washing machine, and two hours in a sandstorm. Temperatures from minus 51 to plus 71 degrees Celsius. Acceleration of 12G. Petrol, solvents, cleaning products and insecticide. Water to 200 metres. Several tests were filmed for the house’s own channel, and the films carried the launch.
What is inside
A 43 mm case machined from solid steel; a scratch-resistant sapphire crystal with anti-reflective coating; a crown protected by a raised bezel; a one-piece dial with stamped indexes and red military-time markings; and a Swiss Ronda 715 quartz movement. The launch dials were black, green and blue, with matching straps and an optional nylon and silicone bumper that clips over the case. Quartz was the right choice: a movement with few moving parts is what survives a tank, as the history of the first quartz wristwatch foretold.
Firefighters, 2014
In August 2014 Victorinox marked the international launch with a partnership with the New York City fire department’s foundation, at an event in Manhattan on 27 August. The chief executive, himself a long-serving volunteer firefighter in Ibach, tied the brand’s values to the service.
“I have come to realize during my years of service that they correspond precisely to the priorities of firefighters.”Carl Elsener Jr., on the firefighters’ partnership, August 2014
Automatics: the serious end of the range
Most Victorinox watches are quartz, and there is no shame in that. But the house has made a handful of mechanical pieces that deserve a collector’s attention, because they use better movements than the price would suggest.
Dive Master 500 Mecha, 2010
The 2010 Dive Master 500 Black Ice Mecha paired a 43 mm Black Ice PVD steel case, rated to 500 metres, with the ETA 2892-A2 automatic. It has a screw-in exhibition back, a date at three o’clock, a stop-seconds hand and a military-time scale; a Deep Blue dial with matching rubber strap was offered as well. The 2892 is thinner and better finished than the 2824 found in most watches at this level, and it winds smoothly by hand. A full set is worth seeking out.
Airboss Mach 6
The Mach 6 chronographs use the Valjoux 7750-family automatic chronograph, the workhorse of Swiss mechanical chronographs; the Power Gauge versions add a power-reserve display. Reported limited editions include a 2008 Power Gauge LE and an even scarcer Mach 6 LE for the 125th jubilee in 2009. Service is straightforward because the movement is so common, and any competent watchmaker can handle it.
Who made the movements
Victorinox does not make movements. Its mechanical watches have used ETA calibres and Valjoux-family chronographs from the Swatch Group’s supply, and its quartz pieces Swiss Ronda movements. That is normal for a brand at this level; the same is true of the other licensed and fashion houses in our guide to Gucci watches.
Reference table
The models below are the ones a collector is most likely to meet, with the facts that can be checked against the case and the movement. Model years are introductions; many references stayed in the range for several seasons.
| Model | Introduced | Case | Movement | Notes |
|---|---|---|---|---|
| Swiss Army Brand Watch | 1989 | Steel, large dial | Swiss quartz | Designed in the United States, made in Switzerland; dial reads Swiss Army |
| Airboss Mach 6, ref. 241447 | Mid-2000s | 45 mm steel, 100 m | Valjoux 7750-family automatic chronograph | Sapphire crystal, exhibition back, tachymeter bezel |
| Airboss Mach 6 Power Gauge LE | 2008 | 45 mm, gunmetal PVD | Automatic chronograph with power reserve | Reported at 333 pieces |
| Dive Master 500 Black Ice Mecha | 2010 | 43 mm, Black Ice PVD steel, 500 m | ETA 2892-A2 automatic | Exhibition back, date, stop-seconds; Deep Blue variant |
| Dive Master 500 Black Ice Chrono | 2010 | Black Ice PVD steel, 500 m | Swiss quartz chronograph | Bracelet or rubber strap |
| I.N.O.X. | 2014 | 43 mm solid steel, 200 m | Ronda 715 quartz | 130 tests; black, green or blue dial; optional bumper |
| Alliance XS | Current | 28 mm steel | Swiss quartz | Small dress watch, ref. 241838, on Japanese counters |
Two habits help. First, read the reference on the caseback: modern Victorinox references are six-digit numbers, many beginning 241, and they make a piece easy to identify. Second, open nothing yourself. A quartz watch rated to 200 or 500 metres keeps that rating only if its gaskets are renewed by someone with a pressure tester.
Three Swiss military names compared
Victorinox is not the only Swiss watch name that borrows army imagery, and buyers confuse them constantly. The table sets out the differences.
| Name | Owner | First watches | Link to the army knife |
|---|---|---|---|
| Victorinox, Swiss Army | Victorinox AG, Ibach | 1989 | Maker of the Original Swiss Army Knife since 1891 |
| Wenger | Victorinox AG since 2005 | 1988 | Maker of the Genuine Swiss Army Knife until 2013 |
| Swiss Military Hanowa | Hanowa, Switzerland | Separate history | None; no connection to either knife maker |
The third name has its own story, covered in our Swiss Military Hanowa guide. For other tool watches built to a hard brief, compare the Italian divers in our Sector No Limits guide and the American field and sports watches in our Timex guide; and for the Japanese answer to the same problem, see vintage Citizen.
Timeline
| Year | Event |
|---|---|
| 1884 | Karl Elsener opens his cutler’s workshop in Ibach |
| 1891 | First soldier’s knives delivered to the Swiss Army |
| 1893 | Paul Boéchat & Cie founded in the Jura, the future Wenger |
| 1897 | Officer’s and Sports Knife patented, 12 June |
| 1908 | Army splits knife supply between Victorinox and Wenger |
| 1909 | Brand named Victoria; cross and shield registered |
| 1921 | Stainless steel adopted; name becomes Victorinox |
| 1979 | Family workshop becomes Victorinox AG |
| 1988 | Wenger begins making watches |
| 1989 | Swiss Army Brand Watch launched in North America |
| 1993 | Victorinox Japan founded, the first own sales company |
| 1996 | American partner renamed Swiss Army Brands, Inc. |
| 2000 | Controlling stake in the watchmaker Xantia; Victorinox Foundation formed |
| 2001 | Victorinox Swiss Army Watch AG set up |
| 2002 | Victorinox buys Swiss Army Brands outright |
| 2005 | Victorinox buys Wenger |
| 2010 | Dive Master 500 Black Ice range, including the Mecha automatic |
| 2013 | Wenger knives folded into Victorinox |
| 2014 | I.N.O.X. shown in March; firefighters’ partnership in August |
| 2016 | Watch competence centre built in Delémont |
Video: the 8-ton pressure test
The house’s own channel published a short film for each of the I.N.O.X. trials. This one, test 100 of 130, shows the watch under eight tons of pressure. It is the clearest way to understand what the case was built to do.
Where the records disagree
Who launched the first watch
The house describes 1989 as its entry into the North American watch market together with its former American partner. American business histories credit the partner, the Forschner Group, with introducing the Swiss Army Brand Watch. Both are right: the name and the cross were Victorinox’s; the product and the selling were Forschner’s.
One tank or two
Launch reports of the I.N.O.X. mention both a 64-ton tank and a 25-ton truck. They were different tests, and the watch is reported to have survived both.
The first Wenger watch
Wenger’s own history puts its first watches in 1988, a year ahead of Victorinox. We have not found a dated Wenger watch from that year to confirm it, so treat the year as the company’s claim.
Limited edition numbers
The 333-piece Power Gauge LE and the 125-piece Mach 6 LE are figures reported by collectors; the second is explicitly unconfirmed. We repeat them as reported.
A sceptic’s view
A fair critic would say that Victorinox sells a story more than a watch. Most of the range uses ordinary Swiss quartz movements that cost a fraction of the finished piece, and the cross and shield do much of the work. The I.N.O.X. torture tests are marketing; no one needs a watch that survives a tank.
All true, and beside the point. The tests describe a design brief that the watch actually meets: a solid case, a protected crown, a sapphire crystal, a movement with nothing to break. The automatics use better calibres than they need to. And the brand has never pretended to be anything other than a maker of tools. Judged as tools, the best Victorinox watches are honest and very good.
What the critic gets right
The fashion-led quartz pieces of the 2000s, with oversized cases and busy dials, have aged less well than the plain field watches. Buy the clear designs: Infantry, the early Swiss Army pieces, the Dive Master 500, the first I.N.O.X.
Checks for collectors
Read the dial and the back
Note the signature (Swiss Army, Victorinox Swiss Army or Victorinox), the cross and shield, and the six-digit reference on the caseback. Look for Swiss Made at the foot of the dial; genuine pieces carry it, and our authenticity guarantee explains how we check.
Check the crystal and the crown
Tool watches are worn hard. Sapphire resists scratches but can chip at the edge; a crown that does not screw down or seat cleanly suggests a worn tube. Our guide to Japanese condition ranks and our own grading guide explain how wear is described.
Ask for the papers
The Japanese guarantee card from the official importer, the outer box and the manual matter more on a modest watch than you might think: they prove origin and date. If you are shopping in person, the department-store counters described in our Ginza essay and our collector’s atlas of Tokyo are the places to start.
Plan the service
A quartz piece needs a battery and new gaskets every few years; an automatic needs a full service. ETA and Valjoux movements are easy to service anywhere. If you are importing a piece, our note on import duties on goods from Japan sets out the costs, and if you want a particular reference found, our private search service, the Hunting Salon, will look for it.
Frequently asked questions
Does Victorinox make its own watches?
It designs and assembles them in Switzerland and has run a dedicated watch centre in Delémont since 2016. Like most brands at its level, it buys its movements from Swiss specialists.
What is the difference between Swiss Army and Victorinox on the dial?
Swiss Army was the North American name used from 1989; Victorinox Swiss Army was the joint name used elsewhere and later everywhere. Modern pieces say Victorinox. All are the same company’s watches.
Is a Wenger watch a Victorinox?
Wenger has belonged to Victorinox since 2005, but Wenger watches are a separate line with their own references. Both are genuine Swiss watches.
When did Victorinox start making watches?
In 1989, when its American partner launched the Swiss Army Brand Watch in North America.
What does I.N.O.X. stand for?
It recalls inox, the French short form for stainless steel, which gave Victorinox the second half of its name in 1921.
Which Victorinox watch is most collectible?
The Dive Master 500 Mecha with the ETA 2892-A2 and the Airboss Mach 6 chronographs are the mechanical pieces collectors seek; the first-series I.N.O.X. of 2014 is the modern classic.
Why look for a Victorinox watch in Japan?
Because Victorinox ran its own Japanese company from 1993, Japanese pieces usually come with the importer’s guarantee card, and Japanese owners tend to keep tool watches carefully, with their boxes. Browse our collectible watches for current pieces.
Further reading
- Watch almanac, for the houses and their family trees
- Swiss Military Hanowa, the other Swiss military name
- Sector No Limits, for another tough diver
- Timex, for the American field watch
- Seiko Astron, for the first quartz wristwatch
- Full set, box and papers, for what completeness is worth
- Bally's watches, for another Swiss house better known for something other than watches: the Mondaine licence and ETA quartz
- Revue Thommen: the Cricket, the Landmark and the Airspeed, for the Waldenburg house of 1853 and its pilot and alarm watches
References
- Victorinox: history
- Victorinox: history (Japanese)
- Victorinox: history (Spanish)
- Swiss Army knife now shares space on shelf (1991)
- Swiss Army Brands, Inc.: the Swiss Army Equipped campaign
- Swiss Army Brands, Inc.: annual report for 2001
- Victorinox launches the Inox rugged watch (2014)
- Victorinox Swiss Army I.N.O.X. collection (2014)
- Celebrating the Swiss Army partnership (2014)
- Dive Master 500 Black Ice Chrono and Mecha (2010)
- Dive Master 500 Mechanical review (2010)
- Airboss Mach 6 chronograph
- Airboss Mach 6 Limited Edition (2018)
- Victorinox in Japan: authorised counters (Japanese)
- Victorinox
- Carl Elsener Jr.
- Swiss Army knife
- Wenger
- Ibach
- Schwyz
- Delémont
- Swiss Armed Forces
- Stainless steel
- Swiss made
- ETA SA
- Valjoux
- Quartz crisis
- Baselworld