Roger Dubuis: The Geneva Seal, the Excalibur and the Japan Thread

Roger Dubuis is a Geneva watch manufacture founded in 1995 by the watchmaker Roger Dubuis and the businessman Carlos Dias, and owned in full by Richemont since 2016. It belongs in our Watch Almanac of houses, family trees and references, on the branch of young Geneva makers that grew out of the restoration workshops of the 1980s. In the sections below we follow the founder's apprenticeship, the partnership that named the firm, the early Hommage and Sympathie watches, the factory years, the Excalibur and its skeleton star, the Richemont era, the cars, the long Japan thread, what turns up in Japan today, how to read the references, where the records disagree and the checks we make before a piece leaves Tokyo.

Roger Dubuis in brief

Three numbers explain most of what follows. The first is 208, the founder's student number at the Geneva watchmaking school and the name of his diploma movement. The second is 28, the size of many limited series since the late 1990s. The third is 88, used for larger editions, with 8 and 888 at either end. Each is a variation on the founder's school number, and the firm still uses them.

An apprentice in Geneva

The belltower and the school

Roger Dubuis was born in 1938. The maison's own account says he took his first steps in watchmaking at fifteen, after a childhood fascination with the clock in a church belltower. He trained at the watchmaking school in Geneva, where his student number was 208. His diploma piece, a movement known by that number, earned the Poinçon de Genève, the Geneva hallmark for movements made and finished to the canton's standard. The firm treats that moment as its origin story, and the number turns up again and again in its later work.

Longines, Saint-Imier

His first job was with Longines in Saint-Imier, in the Bernese Jura, from the late 1950s. He worked there for about nine years, much of it in after-sales repairs, which meant opening and correcting a great many movements made by other hands. The Longines years taught him how a factory watch is built and how it fails. The town and the winged hourglass have their own story in our guide to Longines and Saint-Imier.

Patek Philippe, 1966 to 1980

In the mid-1960s he moved to Patek Philippe in Geneva and joined the complications workshop. He stayed about fourteen years, working on perpetual calendars, chronographs and minute repeaters, the watches that a Geneva maker shows its most demanding clients. Several later Roger Dubuis designs look back to that period, and the round Hommage case in particular follows the lines of a Patek chronograph of the 1940s, the reference 1463, with its distinctive round pushers. Our guide to the Patek Philippe Calatrava and Nautilus sets out where those references sit in the Geneva family tree.

A workshop of his own

Restoration from 1980

In 1980 Roger Dubuis left Patek Philippe and opened his own workshop in Geneva. He restored and serviced complicated watches and clocks for private collectors, salerooms and brands, and he designed complications for other companies. He kept that workshop for about fifteen years. They were hard years for Swiss watchmaking, as quartz movements took the market for everyday watches, and the work that remained for a Geneva specialist was the most complicated and the oldest. Already during the quartz crisis of the late 1970s, while still at Patek Philippe, Dubuis had co-founded the Groupement Genevois des Cabinotiers, a guild meant to keep traditional Geneva skills alive, and he taught classes for young watchmakers outside the factory.

A partner called Placide

In the 1980s Dubuis worked closely with M.E., the movement design company of Jean-Marc Wiederrecht and his wife Catherine-Esther. The couple renamed it P.M.E. in his honour, the extra letter taken from his childhood scouting nickname, Placide. The partnership produced several calibres and patents, including one for a retrograde display. Wiederrecht went on to found Agenhor, which still builds complications for other names, and in 2025 the firm marked the old nickname with a watch called Hommage La Placide.

The bi-retrograde perpetual calendar, 1989

The best known work of those years was a perpetual calendar module with two retrograde displays, built for the New York jeweller Harry Winston, then still run by the founder's son Ronald Winston, and shown at the Basel fair in 1989. It was reported at the time as the first double retrograde perpetual calendar in a wristwatch. The retrograde hand, which sweeps across an arc and flies back to its start, became a recurring feature of the early Roger Dubuis catalogue. The jeweller's own watches are covered in our guide to Harry Winston watches.

Carlos Dias, the impresario

A café in Geneva

The best known version of the meeting is a small one. In the late 1980s Dubuis and Wiederrecht often sat at a café in Geneva to talk through their work, and one of the waiters there was a Portuguese immigrant with ambitions to build a watch company. His name was Carlos Dias. Other accounts give Dias a fuller résumé: a doctorate in political science, spells as a furniture designer and a book publisher, a passion for collecting watches and a period at Franck Muller, whose curved cases and bold numerals are covered in our guide to Franck Muller. The two versions need not exclude each other, but they show how quickly the story of the firm became a story about its partner.

SOGEM, 1995

In 1995 the two men founded SOGEM SA, the Société Genevoise des Montres. Dubuis was fifty-seven. Dias was chief executive and the majority shareholder, and the early dials read Roger Dubuis Horloger Genevois, a Geneva watchmaker's signature rather than a brand. The company took the name Manufacture Roger Dubuis SA in 1999. The division of labour was plain from the start: the quiet watchmaker built and approved the movements, and the partner took charge of design, marketing and the growth of the business.

Two temperaments

Dubuis is remembered as modest and patient, a man who kept a Sympathie perpetual calendar on his wrist and talked about finishing, and Dias as short in stature, large in personality and relentless as a marketer. By 2004 Dias was counted among Switzerland's richest people, with an estimated fortune of one to two hundred million francs. Dubuis had retired by then, and he never appeared on such a list.

First watches, 1996 to 1999

Hommage and Sympathie

The first two collections appeared in 1996. Hommage, as its name says, was a tribute to the watchmakers of the past. Its round case, with a thick case band, integrated lugs, a concave bezel, a screw-down back and domed, fluted round pushers, follows the Patek Philippe chronograph of the 1940s closely. Sympathie, a cushion shape with sharpened corners, became the brand's signature. In later years Dias claimed the design as his own, while Dubuis said the basic form had been proposed by a case maker in the Vallée de Joux and then refined by the two partners. Both families came as simple watches, chronographs, retrograde calendars and perpetual calendars.

The H40 and its numerals

Among early chronographs, collectors single out the Hommage H40, a 40 mm watch with a dial that mixed applied Breguet numerals at 12, 5, 6 and 7 with thick pointed batons. The Breguet numeral dials appear only on the H40. The chronographs used the Lemania 2310, the same base Patek Philippe used for its own perpetual calendar chronographs, and on the Roger Dubuis version the calendar was bi-retrograde. A perpetual calendar on the Sympathie, the S37, combined that base with Dubuis' own module. These watches are now among the most sought after modern Geneva pieces of their decade.

Twenty-eight of each

Series were small. The maison's own account links the number 28 to an unexpected visit from the Sultan of Brunei, who wanted a watch that had already sold out; to meet such requests, series were extended to 28 pieces, and the 8 from the founder's student number became a lasting part of the firm's identity. A second version holds that Dubuis wanted 26 pieces of each variant and that Dias insisted on 28 because it would sell better in Asia. A third simply reads 28 as a variation on 208. All three may hold some truth. What is certain is that 28, 88, 280 and 888 are still the firm's favourite edition sizes, and that the Sultan's visit is also given as the origin of its bespoke service for private clients.

What came in the box

An early watch came with more than a strap. Each piece carried a small lead seal tag stamped with the Geneva hallmark, and each was certified as a chronometer by the observatory in Besançon, in France, as well as hallmarked in Geneva. The watches were fitted with a sapphire back, and a second, solid caseback came in the set for owners who preferred to hide the movement; a watchmaker could swap them. The presentation boxes were in marquetry. Missing pieces of that set matter far more on these watches than on most, and our note on why a full set with box and papers matters explains how much they add.

America and the first fair

The watches reached the United States in 1999 through a distributor in Wilkes-Barre, Pennsylvania, which also ran the North American service centre. In Geneva the brand made its debut at the Salon International de la Haute Horlogerie, the invitation-only fair, in 1999, and by the early 2000s it was showing several new movements a year there, usually in square cases and in editions of 28 or 288.

The Geneva Seal as a house rule

A hallmark from 1886

The Poinçon de Genève is a hallmark created by the Republic and Canton of Geneva in 1886. It certifies that a movement was assembled, adjusted and cased in the canton and that its parts meet a published standard of finish: the finish of bridges, screws, jewels and springs, among other points. The regulation in force through the brand's early years was dated 22 December 1993 and took effect on 6 January 1994; it set out twelve criteria a movement must meet. Today the certification is run by Timelab, a Geneva foundation that also tests for other standards. Few makers hold to it for every watch.

A rule for nearly all

Roger Dubuis has made the hallmark the rule for nearly its whole catalogue, from the first Hommage to the skeleton calibres and tourbillons of today, and few makers of its size hold to it so closely. In the 1990s the hallmark was found mainly on Patek Philippe movements, and that, more than any marketing plan, is why Dubuis felt his watches needed it too. Vacheron Constantin, the other great Geneva name long associated with the seal, is covered in our guide to Vacheron Constantin.

Carbon and cobalt

The rule shaped the later catalogue in less obvious ways. When the firm began to use carbon and other composite materials in movements in the 2010s, it had to show that bridges and plates in those materials could meet a standard written for brass and steel. The Excalibur Spider Carbon of 2017 was presented as the first watch with a movement plate, bridges and tourbillon upper cage made entirely of carbon, and as the first watch with composite materials to be certified by the Poinçon de Genève.

The Meyrin manufacture

A factory built in 2001

Dias was set on making everything in-house. The first own movements, all made to the Geneva hallmark, came in 1999 with the Art Deco-inspired Much More collection, and in 2000 the firm took out a patent on a tri-retrograde display and launched the TooMuch. In 2001 it built its own manufacture in Meyrin, on the edge of Geneva in the commune that is home to the main CERN site and part of Geneva airport, and it was inaugurated in 2002, the year eleven complicated calibres were presented. A second building followed in 2004. The firm made its own cases, acquired the rights to build the Lemania 2310 chronograph itself and set up an enamel workshop.

Spring, tourbillon and titanium

The next steps came quickly. In 2003 the manufacture produced its first own sprung balance and its first tourbillon, and it launched the cross-shaped Follow Me and the Golden Square, offered in three sizes. In 2004 came the Sympathie EasyDiver, presented as the first tourbillon sports watch, in the firm's first titanium case and with the words sport activity watch on the dial, along with the AquaMare and SeaMore lines and eight new calibres. In the same year the brand added jewellery designed by Dias and began opening boutiques.

Peak and strain, 2006 to 2008

By 2006 the company had about 450 employees, and before the financial crisis of 2008 it was making some 25,000 watches a year with revenue above one hundred million francs. The pace had a cost. Building a near complete manufacture in a few years had been very costly, and the firm, by later accounts, was in debt and losing money as demand faltered and early movements proved less reliable than the finish promised. About half of the staff were let go. The tension between the founder's patience and the partner's speed is the thread that runs through these years.

Excalibur and the skeleton star

A sword for a name, 2005

The Excalibur collection arrived in 2005 and is still the core of the catalogue. Its name comes from a story the firm tells about itself: a client once gave Carlos Dias a real medieval sword, with the suggestion that he and Roger Dubuis were the knights of watchmaking. The round case with its three lugs and its sharply fluted bezel became the brand's most recognisable face, and almost every later experiment, from carbon to ceramic to samurai helmets, has been built into an Excalibur.

The first skeletons

The same year brought the first skeleton design and two new calibres: the RD01SQ, presented as the world's first skeletonised double tourbillon, and the RD08, a minute repeater with tourbillon. The skeleton work later took a signature form, with bridges arranged as a star, which the brand calls its astral signature. That star became so central that in 2016 the façade of the Ginza boutique was designed to echo it. The Excalibur is also the family we meet most often in Japan, as the census later in this piece shows.

Six movements in a year

In 2006 the manufacture unveiled six new movements in one year: two tourbillons, the RD05 and RD09, two chronographs, the RD78 and RD79, and two calendars, the RD48 and RD77. Few makers of any size could match that pace, and it was also part of the strain that came to a head two years later.

Under Richemont, 2008 to today

The factory first, then the firm

Richemont, the Geneva luxury group that owns Cartier, IWC and Vacheron Constantin among others, came in by stages. In September 2007 it bought the Meyrin components facility, months after reports of financial difficulties at the firm. In August 2008 it took 60 per cent of the company from Dias, effective 11 August, for a sum later estimated at about 150 million francs. The other 40 per cent belonged to Akram Aljord, a Syrian-born businessman and former Cartier distributor in Dubai, who sold it to Richemont in January 2016. Since then the firm has been a wholly owned subsidiary.

A new chief from IWC

Dias left the company with the sale. Richemont named Matthias Schuler, previously chief operating officer of IWC, chief executive from 19 August 2008. Schaffhausen engineering and Geneva theatre made an odd pair, and the IWC side of that story is told in our guide to IWC and the Portugieser. Under the new owner the collections were pruned hard, some movements were improved and many were abandoned, and the large factory, by one account able to make almost an entire movement down to the hairspring, gave the group capacity for its other brands. Our guide to Cartier follows the sister brand that gained most from that capacity.

New lines after 2008

The years after the sale were busy. The King Square, with three facets on its sapphire crystal, came in 2008. The first own Grande Complication, combining an in-line perpetual calendar, a minute repeater and a tourbillon, came in 2009. The Monegasque followed in 2011 with a roulette theme, and in 2012 came Velvet, the first collection for women, and Pulsion. In 2013 the Excalibur Quatuor, calibre RD101, used four sprung balances and five differentials to average out the effect of gravity, and was also the brand's first watch with a power reserve indicator. The same year brought the first Knights of the Round Table, with twelve micro-sculpted knights on the dial.

Spider and a turn to sport

The Excalibur Spider of 2015 had a skeletonised case as well as a skeletonised movement, and from then on the catalogue leaned towards sport, light materials and large, open dials. Jean-Marc Pontroué was chief executive when the Ginza boutique opened in 2016, on the eve of the motorsport partnerships. Nicola Andreatta stepped down as chief executive in June 2023, with Emmanuel Perrin as interim chief, and in June 2024 David Chaumet, who had first joined the firm in 2008 and later led Baume & Mercier, took over. His earlier brand is in our guide to Baume & Mercier.

Central tourbillon and thirty years

The firm showed its first central tourbillon in 2022, inside a Knights of the Round Table, and in 2024 the Orbis in Machina put a central flying tourbillon, calibre RD115, into an Excalibur in a more classical key. For its thirtieth year in 2025 it returned to its roots with an Excalibur Grande Complication in eight pieces, combining tourbillon, minute repeater and bi-retrograde perpetual calendar, a 40 mm pink gold Excalibur Biretrograde Calendar and, at Dubai Watch Week, the 38 mm Hommage La Placide. For 2026 it grouped its new watches under the theme Movements of the Sky, centred on calendars.

Tyres, bulls and circuits

Pirelli, 2017

The first motorsport partner was a tyre maker. At the Geneva fair in January 2017 the brand showed two Excalibur Spider Pirelli watches with rubber inlays cut from race-winning Pirelli tyres and tread patterns taken from a Cinturato intermediate tyre: a Double Flying Tourbillon in eight pieces and an Automatic Skeleton in 88. In 2018 a PitStop edition came with seven interchangeable straps, one for each Pirelli tyre colour, and in 2023 a Spider MT marked the tyre maker's 150 years.

Lamborghini Squadra Corse

In 2017 also came the Excalibur Aventador S, made with Lamborghini's racing department and protected by five watchmaking patents, and the Italdesign partnership, an eight-piece Excalibur Spider Single Tourbillon in carbon and ceramic in the colours of the Italian flag. The first Excalibur Huracán followed in 2018, the year the brand became official sponsor of the Lamborghini Super Trofeo race series. The Monobalancier calibre RD630 was developed for that partnership, with its balance tilted at 12 degrees, twin barrels and a 60-hour reserve; a Spider Monobalancier Huracán Sterrato of 28 pieces carries it in a 45 mm case. These are factory Lamborghini partnerships and should not be confused with the licensed watches of the founder's family, explained in our guide to Tonino Lamborghini watches.

A Monobalancier on our shelf

One of these watches is with us now: an Excalibur Monobalancier, reference DBEX0956, in titanium with a skeleton dial, which shows the tilted balance and the star-shaped bridges described above. It sits on our luxury archive shelf with the other designer pieces we hold in Tokyo.

Goodwood and the open road

In 2023 Roger Dubuis became official timing partner of the Goodwood Festival of Speed in England, and the same year it showed the Monovortex Split-Seconds Chronograph, a concept watch with a conical tourbillon and a vertical oscillating weight. The theatrical side of modern Swiss watchmaking has other champions, and our guide to Hublot follows the brand that shares much of this ground.

The founder's last years

Leaving in 2003

Roger Dubuis left the company that carried his name in 2003. It was announced as a retirement, and he was then sixty-five, but he went on working. He helped the collective Maîtres du Temps with its first two watches, Chapter One and Chapter Two, and he kept teaching and visiting the bench. He may have held only a small share of the firm by then and had little say in its direction; the maison's own history does not discuss the point.

Return to the manufacture

In 2011, three years after Richemont took control, he returned to the brand as what it called its natural ambassador. He was a familiar figure at its events in his last years, still the quiet watchmaker, and an early Sympathie perpetual calendar remained a fixture on his wrist.

October 2017

Roger Dubuis died on 14 October 2017. Reports give his age as seventy-nine or eighty; seventy-nine fits the birth year of 1938 used by the maison and most references. The maison wrote that he left a legacy of savoir-faire and a caring spirit that still guides its watchmakers.

The Japan thread

Ginza, 25 November 2016

Roger Dubuis opened its first boutique in Japan on 25 November 2016, at Ginza 6-chome on Namiki-dori, as its flagship for the country. The entrance was given a geometric façade modelled on the star of the Astral Skeleton movement. Inside, the space was divided by the brand's three colours, gold, black and red, with a separate world for each collection, a VIP lounge, a library, a concierge desk for the bespoke and repair service and a virtual tour of the Meyrin manufacture. The street and its watch history are the subject of our guide to Ginza and the watch.

A pitcher as ambassador

At the opening ceremony on 24 November the guest of honour was the baseball pitcher Kenta Maeda, then with the Los Angeles Dodgers, who had become the brand's ambassador, alongside chief executive Jean-Marc Pontroué. Maeda said the watch was the lightest he had ever worn, praising the sporty design and the lightness that the titanium case made possible. We read the choice as a signal of the audience the firm wanted in Japan: younger, sporting and drawn to bold modern pieces as much as to Geneva tradition.

Editions for Japan

The brand had made watches for Japan before the boutique opened, and it has kept doing so. In 2014 it released two Japan limited editions, among them the Excalibur 42 Chronograph Japan Special Edition, reference RDDBEX0464, in 18-carat rose gold with a brown dial and the RD681 calibre, in 28 pieces. Later came an Excalibur Huracán for Japan in titanium with the RD630 Monobalancier calibre, in 88 pieces, and in 2021 an Excalibur Automatic Skeleton for Japan, 42 mm in steel with the micro-rotor RD820SQ, in 28 pieces. The numbers are the familiar ones. A Japan edition usually looks like a standard reference at first glance, so the engraving on the back and the papers are what identify it.

Twelve helmets around Edo Castle

The most ambitious Japanese piece came in 2026. Excalibur The Kabuto Legacy, reference RDDBEX1139, is a 45 mm watch in 18-carat pink gold in a boutique edition of 28. Its dial carries twelve micro-sculpted kabuto, the helmets of twelve lords, including Tokugawa Ieyasu and the Four Heavenly Kings who served him, arranged around a miniature Edo Castle built from seventeen pink gold elements worked in four decorative techniques. Each helmet follows the crest and character of its wearer, from the towering deer antlers of Honda Tadakatsu to the golden crescent moon of Date Masamune and the long, delicate ornament of Kato Yoshiaki. The dial marks the year 1603, when a century of civil war ended and an era of peace began that would hold for 265 years. The helmets themselves are explained in our guide to the kabuto, the samurai helmet, and our samurai and bushido shelf holds the armour, swords and art that inspired the dial.

Craft on the case

The watch is a Knights of the Round Table idea moved to Japan: twelve figures around a central table, here twelve lords around a castle. The bodies of the helmets and their decorations are cast separately, joined and then engraved, and the engraving alone takes about two days per helmet. The deep blue of the dial and strap stands for kachi-iro, the dark indigo that samurai wore as a colour of victory and that spread into everyday life once peace came. The strap carries cross stitching like the lacing of armour, the twelve family crests, or kamon, appear on the caseback, and the crown is protected by guards shaped like the guard of a sword. Those sword guards have their own history in our guide to tsuba, the Japanese sword guard. Inside is the automatic calibre RD821, with 172 parts, 33 jewels, a frequency of 28,800 vibrations an hour, about 48 hours of reserve and the Geneva hallmark.

Unveiled at Happo-en

The watch was shown to friends of the brand on 16 July 2026 in a wooden house in Tokyo, at the Happo-en garden, with twelve real kabuto set out in a row and the watch among them. The historical research and supervision were the work of Frederik Cryns, a professor at the International Research Centre for Japanese Studies. The maison released a short film, below, which shows the helmets and the castle at close range.

Roger Dubuis timeline

What turns up in Japan

Thirty-six watches, read in October 2026

In October 2026 we read through a sample of Roger Dubuis pieces offered in Japan, of which thirty-six were watches; the rest were boxes, straps and a single Follow Me pendant in white gold. The sample is small, but it shows clearly which eras of the brand reached Japanese owners. The early Sympathie and Hommage, the watches most prized by collectors elsewhere, were rare in it, while the sports lines of the 2000s were common. As with every census we publish, we give counts and no prices.

The Easy Diver years

The Easy Diver is the surprise. Eleven watches from a single sports family, several of them from editions of 888, suggest that the sports watches of the 2000s found many Japanese owners. Of the watches whose movement was stated, fourteen were automatic, four hand-wound and three tourbillons. The broader picture of why so many fine watches come back to market in Japan in good order is in our guide to why Japan is the finest market for pre-owned luxury, and our collectible watches shelf holds the pieces we have in Tokyo now.

Boxes and trunks

Seven of the pieces in the sample were boxes, cases or travel trunks without a watch, and six were straps. That says something about Japanese owners, who keep the presentation box and the extras with care, and something about the brand, whose boxes were made to be kept. A Roger Dubuis offered without its box and papers has lost part of its story.

Reading a reference

Letters, then a size

The early references are short and easy to read once the pattern is known. A letter or two gives the family, S for Sympathie, H for Hommage, T for TooMuch, G for Golden Square, SE for the EasyDiver and MS for the SeaMore, and the two digits that follow usually give the case size in millimetres: an H40 is a 40 mm Hommage. Longer strings after a dot add further detail of the version, and the early Excalibur used the same logic, as in EX45 for a 45 mm case. Limited pieces carry their individual number, such as 06/28, on the watch, and it should match the papers.

DB and RD numbers

Later references follow a different system: DB, then two letters for the family, then four digits. DBEX is Excalibur, DBSE the later Easy Diver and DBVE the Velvet, so DBEX0956 is an Excalibur and DBVE0069 a Velvet. On the maison's own pages the same numbers carry the prefix RD, as in RDDBEX1139 for the Kabuto Legacy; retailers often drop it. The four digits work as a catalogue number and do not appear to encode the size or the metal, so the reference must be checked against a published specification.

The calibre number is the most useful single clue. An RD with SQ at the end is a skeleton movement, the RD630 is the tilted Monobalancier, and the RD820SQ is the micro-rotor automatic skeleton. When a watch and its papers disagree on any of these, we stop and ask why.

Where the records disagree

Six open questions

  • The first watches. The maison dates its first collections to 1996. The first watches are often dated to 1999, but orders were apparently taken at the Geneva fair in 1998, from a tiny stand. The likeliest reading is small production from 1996, a first stand in 1998 and a full debut in 1999.
  • Why 28. The official story credits a visit from the Sultan of Brunei. Others say Dias chose 28 for Asian buyers, or that it simply varies the number 208. None of the three can be proved, and they are not exclusive.
  • Who drew the Sympathie. Dias later claimed the cushion shape; Dubuis said a Vallée de Joux case maker proposed it and the partners refined it.
  • The founder's age. He was born in 1938 and died on 14 October 2017. Reports give his age as seventy-nine or eighty. Seventy-nine fits the birth year of 1938 used by the maison and most references; eighty would need a birth in 1937. We have not found his exact date of birth.
  • Every watch or nearly every watch. Every watch is often said to carry the Geneva hallmark; the maison itself says nearly every timepiece. We check each piece rather than assume.
  • The only cushion. The maison calls the 2011 Monegasque its one and only cushion case, yet the Sympathie of 1996 is a cushion with pointed corners. The word traditional, used in one version, is the key: the Monegasque is the only conventional cushion.

Two details on the Kabuto Legacy

The maison's own page describes the twelve kamon on the caseback as engraved and finished by hand in one passage and as laser-engraved in another. Most likely the crests are laser-cut and then hand-finished, but we leave the point open until the brand clarifies it. The historian's name is spelled two ways, and we use Frederik Cryns, the usual English form.

A sceptic's view

Founder or name?

The hard question about Roger Dubuis is how much of the brand was ever Roger Dubuis. He built the early movements and approved their finish, but Dias held the majority and ran the business, the founder left in 2003, and the brand has belonged to a group since 2008. The fair answer is that the early Hommage and Sympathie carry his hand, and that the later catalogue carries his number, his hallmark and his respect for complications rather than his designs. Collectors who care about the man tend to look for the watches made before 2003.

Theatre or watchmaking?

The second question is about spectacle. A watch with rubber from a racing tyre or twelve gold helmets on the dial invites the charge of showmanship. Yet the same watches carry the Geneva hallmark, and the movements behind them, the Quatuor with four balances, the tilted Monobalancier, the central tourbillon, are real engineering. The theatre is real, and so is the watchmaking under it.

Did the early movements hold up?

The firm's own account says little about reliability, but the movements of the expansion years earned a reputation as troublesome, and Richemont reworked or dropped many of them after 2008. That is a reason for care with watches of 2002 to 2008, not a reason to avoid them: a well-serviced piece from those years can be a fine watch, and the watchmaker's notes matter more than usual.

Checks for collectors

Before you buy

  • Hallmark. Look for the Geneva hallmark on the movement and, on early watches, ask whether the lead seal tag survives.
  • Edition number. Check that the number on the case or movement matches the papers and that the edition size fits the reference.
  • Second caseback. On early Hommage and Sympathie watches, ask for the solid back that came in the set.
  • Japan editions. For a watch said to be a Japan edition, confirm the reference and the edition marking against a published specification.
  • Box and papers. The marquetry boxes and later presentation boxes were part of the set, and our guide to Japanese condition ranks explains how the condition of the whole set is graded in Japan.

After you buy

Service a Roger Dubuis with the brand or a watchmaker who knows its calibres; ask about parts before the work begins, especially for the calibres that were dropped after 2008. Skeleton watches show every speck of dust, so keep them in a case when not worn. Japanese owners are known for keeping watches boxed and dry, and our guide to how Japan cares for jewellery and watches explains why that matters for a piece like this.

Roger Dubuis also sits among neighbours worth reading. Its theatrical complications share ground with our guide to Jacob & Co., and its integrated approach to Geneva finishing can be compared with our guide to A. Lange & Söhne in Saxony. If you are looking for a particular reference, we can help you find it in Japan.

FAQ

Who founded the Geneva firm, and when?

The watchmaker Roger Dubuis and the businessman Carlos Dias founded it in Geneva in 1995 as SOGEM SA. It became Manufacture Roger Dubuis SA in 1999, and Richemont has owned it in full since 2016.

Does every watch carry the Poinçon de Genève?

Nearly every one. The Geneva hallmark has been the firm's standard since the first collections, and the maison describes it as present on nearly every timepiece it makes. Check the movement of any piece you are considering.

Why do so many editions number 28 or 88?

Because of the founder's student number, 208, at the Geneva watchmaking school. The maison also links the first 28-piece series to a visit from the Sultan of Brunei, while another account credits Carlos Dias and the Asian market. Editions of 8, 88, 280 and 888 follow the same logic.

Is there a boutique in Japan?

Yes. The first Japanese boutique opened in Ginza, at 6-chome on Namiki-dori, on 25 November 2016, with the baseball pitcher Kenta Maeda as ambassador at the opening.

What is The Kabuto Legacy?

An Excalibur of 2026, reference RDDBEX1139, in 45 mm pink gold and an edition of 28, with twelve micro-sculpted samurai helmets around a miniature Edo Castle and twelve family crests on the back. It was unveiled in Tokyo on 16 July 2026.

Further reading

References

  1. Roger Dubuis: founder and history, 1995 to 2026
  2. Roger Dubuis: our heritage (collections)
  3. Richemont: Roger Dubuis maison page
  4. SJX Watches: the story of Roger Dubuis, 1938 to 2017 (October 2017)
  5. Revolution: the story of early Roger Dubuis
  6. Time Transformed: Adieu Monsieur Roger Dubuis (October 2017)
  7. Haute Time: a tribute to Roger Dubuis, 1938 to 2017
  8. JCK: Roger Dubuis plans to add brand and widen production
  9. JCK: Roger Dubuis SA founder Carlos Dias leaves (2008)
  10. Europa Star: Nicola Andreatta steps down as CEO of Roger Dubuis (June 2023)
  11. SJX Watches: Orbis in Machina central monotourbillon (April 2024)
  12. Roger Dubuis (English encyclopaedia entry)
  13. Roger Dubuis (German encyclopaedia entry)
  14. Roger Dubuis (Japanese encyclopaedia entry)
  15. Poinçon de Genève: official site of the Geneva hallmark
  16. Geneva Seal (encyclopaedia entry)
  17. Besançon Observatory (encyclopaedia entry)
  18. Jean-Marc Wiederrecht (encyclopaedia entry)
  19. Longines (encyclopaedia entry)
  20. Patek Philippe (encyclopaedia entry)
  21. Richemont (encyclopaedia entry)
  22. Meyrin (encyclopaedia entry)
  23. Tourbillon (encyclopaedia entry)
  24. Watches and Wonders, formerly SIHH (encyclopaedia entry)
  25. Hassanal Bolkiah, Sultan of Brunei (encyclopaedia entry)
  26. Pirelli: Roger Dubuis and Pirelli timepieces (2017)
  27. Roger Dubuis: Excalibur Spider Monobalancier Huracán Sterrato, RDDBEX1082
  28. Lamborghini Huracán (encyclopaedia entry)
  29. Hajime Sorayama (encyclopaedia entry)
  30. Fashion Press: Roger Dubuis opens its first Japanese boutique in Ginza (Japanese, November 2016)
  31. Zaikei Shimbun: Ginza boutique opening (Japanese, November 2016)
  32. Forza Style: Kenta Maeda at the Ginza opening (Japanese, December 2016)
  33. Kenta Maeda (encyclopaedia entry)
  34. Roger Dubuis Ginza boutique (Japanese)
  35. Roger Dubuis: Excalibur The Kabuto Legacy, RDDBEX1139
  36. Roger Dubuis: Kabuto event, Tokyo 2026
  37. webChronos: Excalibur The Kabuto Legacy (August 2026)
  38. webChronos: the twelve helmets of the Kabuto Legacy (September 2026)
  39. Edo Castle (encyclopaedia entry)
  40. Kabuto (encyclopaedia entry)
  41. Roger Dubuis: The Kabuto Legacy (video, July 2026)
Retour au blog

Laisser un commentaire

Veuillez noter que les commentaires doivent être approuvés avant d'être publiés.