Omega Seamaster: the 300, the Ploprof, the Planet Ocean and Japan

Town, sea and country

The first Seamaster was a sealed everyday watch, not a divers' tool. Omega launched it in 1948 to mark the hundredth year of a house founded in 1848. It was sold as a watch for town, sea and country, a phrase that set its range from the office to the beach. Its roots were military. Between 1940 and 1945 Omega supplied more than 110,000 watches to the British Ministry of Defence. The Seamaster carried that wartime toughness into a civilian case with a softer design. The early watches had plain dials and none of the divers' furniture that came later. A correction to the common story: the Seamaster did not begin as a dive watch, and its first decade was spent on dry land. See also: the Omega house history, for the Brandt family and the other lines, and the Watch Almanac, for the house's place among the others.

The Marine of 1932

Omega's dive story starts sixteen years before the Seamaster name, with a watch called the Marine. The Marine of 1932 was the first divers' watch sold to civilian divers. Its trick was a double case: an inner case holding the movement slid inside an outer one. Accounts differ on the seal between the two. Omega's own history names a leather disc, while Japanese and English trade histories say cork. We print both. The Marine did not carry the Seamaster name. The same year, 1932, Omega became the official timer of the Los Angeles Olympic Games, a role it shared with Longines for decades. Our reading: the Marine gave Omega its claim to divers, and the Olympics gave it a habit of public tests.

From bomber cockpits to the beach

The 1948 Seamaster borrowed its gaskets from the war, and that is why it could be sold as water resistant. Omega's wartime watches were made for pilots and soldiers, who needed a case that kept out water, dust and shock. Omega says it delivered most of the water-resistant watches worn by pilots and navigators of the Royal Air Force between 1939 and 1945. After the war, buyers wanted that durability in a watch they could wear to work. The Seamaster answered with a round case, a sealed back and a choice of hand-wound or self-winding movements. In 2018 Omega revived the look in two limited editions of 1,948 pieces each, at 38 mm across, one with central seconds and one with small seconds. Our reading: the 38 mm reissue shows the true size of the line's origins, which is smaller than most buyers expect. See also: a Seamaster of 1958 with calibre 503, a dress Seamaster of the early kind.

The professional line of 1957

In 1957 Omega turned the Seamaster into a working divers' watch, and it did so alongside two other instruments. That year the house launched a professional trio: the Seamaster 300, the Speedmaster and the Railmaster. The Seamaster 300 was reference CK2913. It had a rotating bezel, broad arrow hands and the self-winding calibre 501 in a steel case 39 mm across. Its crown used a seal Omega called Naiad, after the water nymph, which tightened as water pressure rose. In practice it could leak in shallow water, where the pressure was too low to close it. Despite the name, the first Seamaster 300 was rated to 200 metres, or 20 atmospheres. A Japanese history of the model explains why: 300 metres was the target, and testing equipment of the day reached only 200. Our reading: the 300 was a promise the case could keep before the test bench could prove it. See also: the Speedmaster, the 1957 sibling that went to the Moon, and the Rolex Submariner, the rival rated to the same depth.

Why 200 metres was enough

The 1957 rating matched the best divers' watches of its decade. A Japanese magazine notes that 200 metres was the same figure as the Submariner of the period. Scuba diving was spreading fast and opening the sea to leisure as well as work. The watch was built to be read in dark water, with luminous broad arrow hands and a bezel that counted elapsed minutes. Omega-restored examples often have screw-down crowns in place of the original Naiad. Our reading: when buyers say Seamaster 300 today they may mean the 1957 watch, its 1960s successor or the modern reissue, and the reference number is the only safe guide. See also: the Blancpain Fifty Fathoms, the other divers' watch of the 1950s.

The Seamaster 300 proved itself in the 1960s with scientists and navies, not with advertising. Two years after that letter from Washington, the sea floor became a place to live. Jacques-Yves Cousteau's team relied on the Seamaster 300 during the Precontinent II experiments in the Red Sea, in the summer of 1963. The project set out to show that divers could live for long periods in a submerged saturated-gas habitat. The same year Omega updated the watch, and the second generation became the one most collectors picture. It kept the name and gained luminous baton hands and large tritium markers. Its reference was ST 165.024. Our reading: the second-generation 300 is the true working Seamaster, because it was the version issued to professionals. See also: Tudor, the house whose divers' watch replaced it in British service.

Navy issue, 1967 to 1971

Between 1967 and 1971 the British Ministry of Defence took delivery of military Seamaster 300s. Both the Royal Navy and the Army received them, and only the case-back marks told the batches apart. Navy watches were engraved 0552, and Army watches W10. They also differed from the civilian 165.024 in four ways. The bars between the lugs were fixed, the dial carried a T in a circle for tritium, the hands followed military specification and the crown screwed down. In 1971 the Ministry chose a Tudor divers' watch to replace the Seamaster 300. Our reading: the issue marks are the first thing to check on any military claim, and the fixed bars are the second. A civilian case with added engraving is a different watch. See also: our authenticity guarantee, for how we check marks like these.

A dive off Okinawa, 26 February 1970

One issued Seamaster 300 links the line to Japan directly. On 26 February 1970 HMS Hubberston lay at anchor a few miles off Okinawa. On board, a Royal Navy diver named J.B. Fisher was preparing to search for an aircraft wreck about 60 feet down. The last thing he did before entering the water was set the bezel of his Seamaster for the dive. His logbook survives, with the dive and, later, an entry for the search for a lost watch. We found no record of what the wreck was; we do not speculate. Our reading: a working dive in Okinawan water is the earliest Japanese chapter of the Seamaster we can document. See also: why the world's treasures came to rest in Japan, for how watches like this reach Tokyo.

The year Tokyo kept its own time

Omega's Olympic role explains why Japan read the Seamaster against a Japanese rival from the start. From the Los Angeles Games of 1932, Olympic timing was held by two Swiss houses, Omega and Longines. Seiko set out to change that after the Rome Games of 1960. In May 1963 the Tokyo organising committee selected Seiko as official timer for the Games of 1964. Seiko then became the first timer to use quartz watches and clocks for all the major events of a Games. Omega later returned to the role, and by 2019 it had timed 28 Olympic Games. Our reading: Tokyo 1964 is why Japanese collectors weigh a Swiss divers' watch against a Japanese one by reflex. See also: the Seiko house history, for the firm that timed Tokyo, and King Seiko and Grand Seiko, for the decade's factory duel.

Japan's first divers' watch, 1965

Seiko answered the Seamaster 300 within a decade, with a divers' watch of its own. The first Japanese divers' watch appeared in 1965, water resistant to 150 metres. It used a double packing structure to hold out the pressure. The watch was chosen for the 8th Japanese Antarctic Research Expedition, and it proved itself there in 1966. Seiko's later professional divers grew from a letter by a professional diver in Hiroshima prefecture. He wrote that saturation dives past 300 metres damaged most watches. That was the same problem Omega was solving in Europe with the Ploprof. Our reading: Japan and Switzerland met the helium problem at the same moment, and each built a different answer. See also: vintage Seiko divers, for the Japanese line from the 1965 watch onwards.

The Ploprof and the helium problem

The Ploprof is the strangest Seamaster, and every odd feature solves one problem. Saturation divers live for days in pressurised chambers breathing a gas mixed with helium. Helium can build up inside a watch case, and on decompression it can blow the crystal off. Other houses added a valve to let the gas out. Omega, working with the diving firm COMEX, chose to keep the helium out altogether. The result was the Seamaster 600 Plongeur Professionnel, the professional diver, known as the Ploprof. The case was milled from a single block of steel, and the movement loaded from the front. The only seals were around the crystal and the crown. Our reading: the Ploprof is a case design first and a watch second. See also: Oris divers' watches, for a smaller house's tool divers.

Janus II, 1970

The Ploprof was tested in a real saturation dive before it was sold. The prototype dates from 1968, with calibre 1000 inside. In 1970 COMEX ran the Janus II programme in open sea, sponsored by a French ocean agency and the oil company ELF-ERAP. Its goal was to work at 800 to 850 feet. In September 1970 three COMEX divers worked twice a day for eight days at 840 feet, up to three hours at a time. The Seamaster 600 played a documented part in that operation. Tests showed the case could survive simulated depths of 1,370 metres. An Omega service bulletin of 1971 says each Ploprof was tested to 1,000 metres. Our reading: the 600 on the dial is a modest figure, chosen for safety, not a limit. The partnership did not last. COMEX ended it just as the watch reached the public, and signed instead with Rolex.

The red button and the crown at nine

The Ploprof is easy to recognise across a room. The square crown sits at nine o'clock, sunk into the case under a large locking nut, which leaves the wrist free to bend. A big red button unlocks the bezel, which can then turn in either direction. Omega's own advertisements of the 1970s explained the case in one line about helium. "If a watch is proof against helium, it's proof against just about everything else." The watch was marked for professional divers only. In 1975 a British North Sea diver named David Stevens bought one in a Kent jeweller's to replace his Seiko. Our reading: the Ploprof was built for people whose lives depended on it, and they bought it.

Three marks and a reissue

The Ploprof changed little in its first life, but the changes date a watch. The Mark 1 reached the market in April 1971 with calibre 1002. The Mark 2 of 1973 brought new dial printing. The Mark 3 of 1975 added metres and feet on the dial. The watch stayed in shops until 1979. Many were serviced with replacement parts, and one study of examples serviced in Bienne found over 60 per cent had a swapped movement. Less than ten titanium prototypes are thought to exist. At Basel in 2009 Omega brought the design back, rated to 1,200 metres, with a screwed back and calibre 8500. A later titanium version used calibre 8912 and dropped the date. Our reading: on a vintage Ploprof the movement number matters more than the dial. See also: our grading guide, for how we describe service parts.

The 1970s go deeper and stranger

The 1970s were the Seamaster's most experimental decade, and its shapes show it. Beside the Ploprof came a heavier sibling, the Seamaster 1000. It was Omega's most water-resistant watch until 2009. Its thick case, of a type Omega calls the Pilot Line, was curved to fit the wrist, with a ribbed back that gripped a wetsuit. Omega released it to the public only after several years of testing. Accounts differ on its dates. One account gives 1972 for a first run of 150 watches and 1976 for a second run of 300. Omega's own pages place it in 1971 in one history and 1976 in another. We print all three. Collectors call it the Grand, and keep the Ploprof name for the 600 alone. Our reading: the Grand is the rarest serious Seamaster diver, and any example deserves papers. See also: the Seiko room, for Japan's own tool watches of the same decade.

A blue chronograph, a bullhead and a hydrographer's watch

Three more Seamasters of the decade still draw collectors, each for a different reason. The Seamaster Diver 120m of 1972 was the first divers' chronograph water resistant to 120 metres. Its push-buttons worked at that full depth, and its dial was a radiant blue. The Bullhead put its pushers and crown on top of the case, a layout first tried for racing drivers. It came in 1969 by one account and 1970 by Omega's. The Seamaster Professional 200 had an octagonal case. The French navy's hydrographic service, SHOM, chose it for its charting work. Collectors now call it the SHOM. Accounts differ on its year: 1978 in a Japanese history, 1979 in Omega's. We print both. Our reading: each of these watches answered one working need, which is why none of them looks like the others.

1993: the return of the diver

The Seamaster Professional of 1993 brought Omega back to serious diving after two quiet decades. It was rated to 300 metres and carried a unidirectional bezel and a helium escape valve. It was the first Omega divers' watch with a manually operated valve. For twenty years Omega had believed a well-built case would not need one. The design was new and easy to remember: a waved dial, skeletonised hands and round markers. The hands recalled the Ploprof's. The chronograph won the first Watch of the Year award of a German watch magazine, for 1994. Our reading: 1993 is the true start of the modern Seamaster, and the waved dial is its signature. See also: a Diver 300M James Bond set in 18 ct gold, a later chapter of the same watch.

Quartz first, then self-winding

The 1993 Seamaster came first as a quartz watch, reference 2541.80. An automatic version, 2531.80, followed soon after with calibre 1109 and later calibre 1120. Omega lists the 2531.80.00 as a chronometer with a date, dated 1993. Our reading: the 2531.80 is the reference most buyers mean by the Bond Seamaster, and the quartz 2541.80 the one Bond wore first. See also: collectible watches, for the wider room of graded watches from Tokyo.

The Co-Axial Diver

The Diver changed its name when it changed its heart. When the Co-Axial calibre 2500 arrived, the Seamaster Professional 300 became the Seamaster Diver 300M. The dial gained the word Seamaster in red under the Omega name. A Bond limited edition of the Co-Axial watch appeared the same year. In 2018 the Diver was rebuilt at 42 mm with calibre 8800, a Master Chronometer with 55 hours of reserve. The waved dial returned, now in polished ceramic and engraved by laser, and every bezel became ceramic. Our reading: the red Seamaster word is the quickest way to tell a Co-Axial Diver from its predecessor at a glance. See also: a Seamaster ref. 166.009 in 18 ct gold, the dress side of the name.

Omega's own film above shows the current Diver 300M.

A naval man and a diver

James Bond made the Seamaster famous, and a costume designer chose it. In GoldenEye, in 1995, Bond's blue Seamaster showed clearly beneath his cuff. Lindy Hemming, the film's costume designer, chose it because it suited a naval commander. Omega became Bond's official watch the same year. Pierce Brosnan wore the quartz 2541.80 in GoldenEye. The automatic 2531.80 followed in Tomorrow Never Dies, The World Is Not Enough and Die Another Day. For the fortieth year of the films Omega made a Bond edition of 10,007 pieces, with 007 logos on the dial and a numbered back. Our reading: Bond turned a working divers' watch into a dress watch for men who never dive. See also: Ginza and the watch, for the street where Japan buys watches like these.

Daniel Craig and the Planet Ocean

The Bond watch moved to the Planet Ocean in 2006. In Casino Royale, Daniel Craig wears a Planet Ocean 2900.50.91 on a rubber strap in the opening scenes, then a Seamaster 300M later. The first co-branded Planet Ocean came the same year, with 007 on the seconds hand. In Skyfall, in 2012, Bond wore a Planet Ocean and an Aqua Terra. The Aqua Terra was a midsize chronometer, reference 231.10.39.21.03.001. That reference family is the most named in Japan's Seamaster titles this week. In No Time to Die, released in 2021, Craig wore a Diver 300M Master Chronometer 007 Edition. Our reading: every Bond change pulls a new reference into the market, and the films date the watches as precisely as any catalogue.

The Co-Axial years

From 1999 the Seamaster became the test bed for a new escapement, and that changed what a modern Seamaster is worth to a collector. The English watchmaker George Daniels invented the Co-Axial escapement. Omega launched it in calibre 2500 in 1999. It was the first practical new escapement for a mechanical watch in 250 years. In 2007 Omega launched calibre 8500, the first movement built entirely around the Co-Axial escapement. Every one of its 202 parts was developed and made in-house. In 2008 calibres 8520 and 8521 brought the system to Aqua Terra watches of 30 mm. Our reading: a Co-Axial Seamaster is a modern movement in an old family, and its service history matters as much as its dial. See also: Longines, Omega's partner in Olympic timing and its neighbour in the same group, and Swatch, for the group's plastic watch and its Ginza story.

The Aqua Terra, 2002

The Aqua Terra brought the Seamaster back to its town, sea and country roots. It was released in 2002 with a restrained dial that recalled the clean lines of the 1957 Seamaster 300. It became a Bond watch in Skyfall in 2012, as a midsize chronometer. Its 30 mm ladies' versions were the first to carry calibres 8520 and 8521. The Aqua Terra now leads the modern Seamaster shelf in Japan, named in about one Seamaster title in nine. The single most named reference this week was the Aqua Terra family 231.10.39. Our reading: the Aqua Terra is the Seamaster that Japan wears to work, much as the 1948 watch was meant to be worn. See also: a Seamaster De Ville with a silver dial, the 1960s ancestor of the everyday Seamaster.

Planet Ocean, from 2005

The Planet Ocean was built as the serious diver beside the Diver 300M. Omega introduced it in 2005, rated to 600 metres. It came in 42 mm or 45.5 mm cases. Its design deliberately recalled the first Seamaster 300 of 1957. The bezel was black or orange, and the orange version became the emblem of the line. A helium escape valve sat on the case. Inside was the Co-Axial calibre 2500. Our reading: the Planet Ocean is to the Diver 300M what a professional instrument is to a sports watch. See also: Tissot and the Seastar, the group's entry divers' watch.

Three generations

The Planet Ocean has changed in three steps, and each one can be read from the movement. The first generation, from 2005 to 2011, used calibre 2500 on an ETA base. The second used the in-house calibre 8500, a Co-Axial chronometer with a silicon hairspring and 60 hours of reserve. Its hour hand could be set on its own, in one-hour steps. A transitional version of 1,948 pieces paired a liquid metal bezel with a glossy ceramic dial. The third generation, from 2016, set orange vulcanised rubber into the ceramic bezel, and its calibre 8900 was certified by METAS, the Swiss metrology institute. Our reading: for a used Planet Ocean, the calibre number on the paperwork dates the watch faster than the dial does.

Eleven kilometres down

In 2019 a Seamaster went to the deepest point on Earth and came back working. The dive belonged to the Five Deeps Expedition of Victor Vescovo, the first person to reach both the highest and the lowest points on the planet. Vescovo piloted the submersible Limiting Factor to the Challenger Deep of the Mariana Trench in April and May 2019. Two prototype watches rode on the craft's robotic arm. A third was fixed to a lander that went down beside it. The watches were called FOD-X, for full ocean depth experimental. Before the dive they were pressure tested to 15,000 metres in Barcelona, with a surveyor present. Our reading: the Ultra Deep moved the Seamaster's record from human divers to machines, and Omega made sure the record was witnessed. See also: Grand Seiko and Credor, for Japan's own high-grade watches.

Two and a half days on the floor

The most convincing test of the Ultra Deep was an accident. The lander carrying the third watch failed to answer the call to surface. Vescovo chose to go back for it rather than leave it at the bottom. The watch spent two and a half days at about 16,000 pounds per square inch. When it was recovered it was still running, and it had lost one second. The case, bezel and crown were machined from offcuts of the submersible's titanium hull. Its open lugs, called Manta lugs after the ray, reduce stress points at depth. The strap was polyamide with a Velcro closure, a choice drawn from Omega's Apollo straps. Our reading: no marketing plan would have risked that test, which is why it convinces.

Omega's film above follows the Ultra Deep and the expedition.

The record, and the 6,000-metre collection

The depth figure itself has moved since the dive. Accounts in 2019 gave 10,928 metres. Omega now gives 10,935 metres, updated in 2020 from an earlier 10,925 metres. We print the figures as given, because sonar surveys of the trench were revised. In 2022 Omega turned the prototype into a production collection rated to 6,000 metres. It was made in grade 5 titanium and a new steel alloy Omega calls O-MEGASTEEL. Our reading: the production Ultra Deep is the deepest-rated Seamaster most people can buy, and it is still rare on Japan's shelf. We found no Ultra Deep among the Japanese Seamaster titles we read this week.

Old faces, new movements

From 2014 Omega began to rebuild its past Seamasters with modern movements, and the reissues now sit beside the originals. In 2014 it launched the Seamaster 300 Master Co-Axial, recalling the 1957 watch. The steel case grew to 41 mm. The bezel used Liquidmetal, an alloy that resists wear and corrosion but shines like old acrylic. A sapphire back showed calibre 8400. In 2017 the 1957 trio returned in limited editions of 3,557 pieces, with calibre 8806 in the Seamaster. In 2018 the 1948 Seamaster followed, in two editions of 1,948 pieces. A Japanese magazine calls the modern 300 one of Omega's most popular models. Our reading: a reissue is the right choice for anyone who wants to dive, and the original is the right choice for anyone who wants the history. The two should never be confused in a description. See also: box and papers, for what a modern limited edition should keep.

Japan and the Seamaster

Japan buys the Seamaster in a Swiss house built on a Ginza corner by a Japanese architect. In 2004 the Swatch Group bought the Pearl Building, a 1960s block in the heart of Ginza. Shigeru Ban won the design competition with a plan for a hanging garden. His building rose to fourteen floors and 56 metres. It opened on 23 May 2007, named for Nicolas G. Hayek, with seven brand boutiques, including Omega's. The street front is a glass shutter that opens a three-storey atrium to the pavement. The small glass showrooms along the passage are hydraulic lifts that carry visitors to each brand's floor. Omega's flagship sits on the second floor, at 7-9-18 Ginza. It reopened after a renovation on 29 May 2020, with a brighter and more open interior. Our reading: Ginza is where Japan learned to judge a fine watch, and Omega placed its flagship in the middle of that school. See also: a Speedmaster Tokyo 2020 set, the Olympic sister of the Seamaster editions below.

The Tokyo 2020 Seamasters

Omega marked the Tokyo Games with two Seamasters that wore Japan on the dial. Both went on sale on 24 July 2019, exactly a year before the planned opening. Each was limited to 2,020 pieces, and each carried the Tokyo Olympic emblem on the back. The Aqua Terra edition, 41 mm across, was the first in its series with a ceramic dial. The Planet Ocean edition, 39.5 mm across, had a polished white ceramic dial. Its bezel carried a red 20 in liquid ceramic for the year of the Games. Its lollipop seconds hand was designed to recall the Japanese flag. Our reading: the red disc on the seconds hand is the most Japanese detail Omega has put on a Seamaster. We found only one Tokyo 2020 Seamaster among the Japanese titles we read this week.

Reading a Japanese Seamaster title

Japanese descriptions of a Seamaster use a handful of fixed words, and each one changes how to read the watch. Jidōmaki means self-winding, and it appears in about two in five Seamaster titles we read this week. Kuōtsu means quartz, and it appears in about one in three. Temaki means hand-wound, and it appears in only about one in twenty-three. Kadō means running, which says the watch works but says nothing about its accuracy. Hoshōsho is the guarantee card, named in about one title in ten. OH, short for overhaul, means a recent full service. About one title in eleven offered only parts, straps or a watch for repair. Our reading: in Japan the movement type comes before the model name, so read the title from the movement word outward. See also: duties and customs, for what to expect when a watch ships from Japan.

Know the watch at a glance

The table is a map, not a full list. Omega made many more Seamaster references, including dress, ladies' and gold watches across every decade. The safest single check on any Seamaster is the reference and the calibre together, read from the case back and the movement. See also: our Otoriyose private request, if you are looking for one particular reference.

The shelf in Japan this week

Japan's Seamaster shelf is mostly everyday watches, and the famous divers are rare on it. We read about a thousand of the Seamaster titles offered in Japan's main watch category this week, out of about 3,400. About two in five named a self-winding movement, and about one in three named quartz. The Seamaster 120 appeared in about one title in eight, and the Aqua Terra in about one in nine. The Diver 300M and its references appeared in about one in fourteen. The Planet Ocean appeared in about one in thirty-four. The Ploprof appeared in only five titles, all of them modern or the 1,000-metre Grand. We found no Ultra Deep. About one title in seven used a vintage or antique word, and about one in thirteen named a six-figure reference of the 1960s or 1970s. Our reading: Japan holds a deep stock of ordinary Seamasters and a thin stock of the tool watches, so patience matters for the rare ones. Counts are of titles, not watches, and include parts and straps.

Where the record differs

What we checked and left out

Our earlier guides, revisited

Our Omega house history, linked at the top of this guide, gives the Seamaster a few lines beside the professional trio of 1957 and the Royal Navy issue of 1967 to 1971. This guide agrees with both points. It adds what the house history leaves for later: the Ploprof, the Seamaster 1000, the Planet Ocean and the Ultra Deep. It does not date the second-generation 300; this guide prints both dates the record gives, 1963 and 1964. Our vintage Seiko divers' guide, linked above, is the Japanese half of the same decade. Read together, the three guides cover the sea from Bienne to Tokyo.

A timeline

Why the Seamaster matters

The Seamaster is the clearest record in watchmaking of a house learning the sea one problem at a time. It began as a sealed town watch, built on wartime gaskets. It learned to dive in 1957, worked for navies in the 1960s and met helium in the 1970s. It came back in 1993 with a valve, a waved dial and a film career. It then took the Co-Axial escapement into everyday wear. In 2019 it went to the bottom of the deepest trench and came back with a second lost. Japan watched each step, from the Olympic clock of 1964 to a dive off Okinawa and a Ginza flagship. Our reading: the best Seamaster to own is the one whose reference, calibre and rating tell the same story. That is our reading.

Answered plainly

When was the first Seamaster made?

In 1948, for Omega's centenary. It was a water-resistant everyday watch, not a divers' watch.

Why is the Seamaster 300 of 1957 rated to 200 metres?

Testing equipment of the day reached 200 metres; 300 was the target.

What does Ploprof mean?

Plongeur Professionnel, French for professional diver.

Which Seamaster did James Bond wear first?

The quartz Seamaster Professional 2541.80, in GoldenEye in 1995.

How deep has a Seamaster gone?

To the Challenger Deep in 2019, at about 10,930 metres. The prototypes were tested to 15,000 metres.

Seen elsewhere

Further reading

References

Retour au blog

Laisser un commentaire

Veuillez noter que les commentaires doivent être approuvés avant d'être publiés.