Omega De Ville: the Town Watch, Prestige, Trésor and Japan

A Seamaster for the town

The De Ville was born as a dress Seamaster for buyers who never meant to swim in it. Omega introduced the Seamaster De Ville in October 1960. It balanced the three professional watches of 1957, the Speedmaster, the Seamaster 300 and the Railmaster. The new watch was aimed at the young and prosperous buyers of the sixties, above all in America. Period catalogues priced it between the plain Seamaster and the Constellation. The name is French for "of the town", and it has nothing to do with the devil. An early slogan promised "an Omega so slim it hugs your wrist". Our reading: the De Ville began as a sales idea, a Seamaster dressed for the office. See also: the Omega house history, for the families beside it, and the Watch Almanac, for Omega among the great houses.

The name on the dial

The first of these watches did not say De Ville on the dial at all. Early dials read only Seamaster, although the catalogues used the full name from October 1960. The words De Ville joined the dial at the end of 1962. The change came at the request of Norman Morris, Omega's agent in New York. The Seamaster De Ville became a common presentation watch for American companies, given for long service. A top-tier 14K version, reference LL 6590-1, was often made without the seahorse on the back, to leave room for an engraving. Our reading: a plain Seamaster dial on a slim case of 1961 can still be an early De Ville, and the reference will tell. See also: a Seamaster De Ville automatic with date, for the dial signature of the 1960s.

The early references

The early Seamaster De Villes used Omega's proven automatic calibres. Reference 14730 of 1960 was the first automatic with a date, using calibre 562. Its early dials read Seamaster Calendar. In 1964 reference 165.020, with calibre 552, replaced the 14905. In the same year reference 166.020, with calibres 562, 563 and 565 and a date, replaced the 14910. In 1967 the family gained a hand-wound chronograph, reference 145.005, with calibre 321. Its dial could read either Seamaster or Seamaster De Ville. Our reading: the six-digit references from 1964 are the easiest to date and to check against a movement.

A case that opens from the front

The Seamaster De Ville's case opens from the front, and that single choice made it slim. Omega called it a unishell case. It has three parts: the case, the crystal and the bezel. There is no screw-down back, so the movement is reached by lifting the crystal. Omega advertised these cases as waterproof to 200 feet. The case makers changed by market. Swiss steel cases came from Centrale Boîtes or S. Graber before 1962, and from EPSA after that. Gold cases came from Serva in La Chaux-de-Fonds. See also: the Omega Speedmaster, for the professional watch of the same decade, and Longines, for a rival's dress automatics.

Cases for Britain and America

Watches sold in Britain carried cases made locally. Omega's English cases were made by Dennison in Birmingham until 1968, and then by Shackman in Chesham. French cases came from Paul Frank et Fils, and Brazilian ones from Carci. The American market had its own cases from the Ross Watch Case Corporation on Long Island, with thinner lugs. The American agent also made a curiosity, the Kleerback reference KL 6292 VB. It had a plastic window in the back, conceived in Norman Morris's offices, to show calibre 560. American references of the Seamaster De Ville ran to the end of the 1970s. Our reading: the country of the case is the first question to ask of any Seamaster De Ville.

Dials and tritium

The dials of the 1960s show small changes that date a watch. Early dials carry a seahorse logo with a "coat-hanger" S; later ones use a rounder S. From January 1964 luminous dials were marked T SWISS MADE T, after a Swiss ruling of October 1963 on tritium. Special dials include linen, clamshell, cross and sector patterns. Collectors also prize a plain silvered style they call the "Don Draper". A solid gold dial of the 1970s can carry the marking OM SWISS MADE OM. Our reading: a dial that breaks these rules for its date has usually been refinished. See also: Japanese condition ranks, for how such dials are graded in Japan.

1967: a line of its own

In 1967 the De Ville stepped out of the Seamaster range and became a collection in its own right. Omega says the new line drew attention because it joined proven movements to careful finish and design. The house describes it as simpler, slimmer and offered in more versions. The De Ville of 1967 was a different reference, with shorter lugs. A correction to the common story: 1967 did not end the Seamaster De Ville, which stayed in the catalogue through the 1970s. Omega itself says the De Ville "dropped" the Seamaster name that year. Both are true in their way: a new line began, and the old dress Seamaster lived on beside it. See also: the Patek Philippe Calatrava, for the round dress watch the De Ville answered, and Cartier's Tank and Santos, for the shaped cases of the same years.

A dress line with many shapes

The new line was free to leave the round Seamaster case behind. Square, rectangular, oval and tonneau De Villes followed, many of them hand-wound and thin. Omega gives a 1980 De Ville logo the name "Chicago Skyline". Gold and gold-capped cases sat beside steel ones. Our reading: hand-wound calibres kept these cases slim, because a rotor adds height. One of our own pieces shows the type: a rectangular De Ville in 18K gold, reference 8269, hand-wound, on an integrated gold bracelet. The shaped De Villes of the 1970s are the line's most varied decade, and the least studied. See also: Japanese gold and platinum hallmarks, for reading the marks on a gold case.

Gold, gemstones and the Dynamic

In the 1970s the De Ville became Omega's home for design experiments. The jeweller Andrew Grima received the Queen's Royal Warrant in 1970. Shortly afterwards Omega asked him to design a collection of dress watches. The result was About Time, some thirty hand-made watches that showed the time through a gemstone. Grima's fee is given as one million pounds. More wearable lines followed under the De Ville name: Time in Style, Jeux d'Or, Jeux d'Argent and an Emerald line. Many of their bracelets were engraved and assembled by hand, link by link. See also: Gérald Genta, for another designer who shaped Swiss watches in that decade, and our collectible watches, for dress watches graded in Tokyo now.

Grima's About Time

Grima built the About Time watches at a moment when digital watches threatened gold mechanical work. His answer was to make the case itself a jewel, with the dial seen through a cut stone. The collection was small and costly, and few pieces exist. The De Ville lines that followed were simpler and easier to wear. They kept the textured gold and the organic shapes, in cases a buyer could wear to the office. A line attributed to Grima sums up his attitude: "If you need to know the time, you ask your chauffeur." Our reading: the Grima De Villes are jewellery first and watches second, and they should be judged as gold work.

The Dynamic joins the De Ville

The Genève Dynamic was created in 1967 and launched in 1968. Its designer, Raymond Thévenaz, shaped the case after a study of the anatomy of the wrist. The result was an elliptical case meant to sit flat and comfortably. The cases were made by Fontana, an Italian firm in Sesto Calende. The first Dynamics belonged to the Genève line. At some point in the 1970s Omega moved them into the De Ville and updated their looks. Later watches with the Dynamic name returned in the 1980s and 1990s, outside the De Ville. Our reading: a Dynamic signed De Ville is a 1970s watch, and the dial tells the decade.

The race to the thinnest watch

From 1978 to 1980, the thinnest watch in the world was a contest between Japan and Switzerland. The Japanese makers started it. Citizen came first in 1978, with a watch 4.1 mm thick around a movement of 0.98 mm. Seiko answered in the same year with calibre 9320, a quartz movement 0.90 mm thick. The finished Seiko watch measured 2.5 mm. In Japan it was sold under the new Credor name. The Swiss replied with the Delirium project, and Concord's Delirium reached 1.98 mm in January 1979. See also: the Seiko Astron, for the first quartz wristwatch, and Grand Seiko and Credor, for the Japanese line that carried the thin Seiko.

Omega's Dinosaure

Omega's entry in the race was the Dinosaure of 1980. Reference BA 191.0114 has an 18K yellow gold case with a transparent sapphire back. The dial is transparent, with two discs, one printed with the hour hand and one with the minute hand. The movement is the quartz calibre 1355. The first Dinosaure measured about 1.8 mm. A later version was reduced to 1.48 mm, in about 595 pieces across several references. A special lithium cell, the Renata 333, was made for the thinnest watches of this race. Our reading: the Dinosaure shows how seriously Omega took the Japanese challenge.

Not every thin De Ville of these years was quartz. Omega's thin hand-wound calibres kept the dress line slim without a battery. Calibre 625 is the movement we see named most often on De Villes in Japan today. Calibre 620 follows it. A 14K gold De Ville with calibre 625 shows the type, with a champagne dial and black Roman numerals. Quartz calibres such as the 1378 also appear often. Our reading: the thin De Villes were Omega's answer to Seiko as much as to its Swiss rivals. See also: the Seiko house history, for the two Seiko factories behind the thin quartz.

A tourbillon at the centre

In 1994 Omega used the De Ville to show it could still make a tourbillon nobody else made. The house had history here: in 1947 it built one of the first tourbillon wristwatch movements. Those calibre 30 I watches were made for observatory timing contests, not for sale. Their cages turned once every seven and a half minutes. The De Ville Central Tourbillon of 1994 put the cage in the middle of the dial, where the hands normally sit. It marked a hundred years of the Omega name, first given to a calibre in 1894. Its movement was the self-winding calibre 1170. See also: King Seiko and Grand Seiko, for the Japanese watches that also chased observatory prizes.

Project 33

The central tourbillon began as an internal project in 1991. Its code name was Project 33, and its leaders were Moritz Grimm and André Beyner. The team had three years to finish it for the anniversary. The hardest problem was the hands. Hands are mounted on pivots at the centre of a movement, and the tourbillon now occupied that space. A United States patent for the design, number 5,608,694, was granted in 1995 and expired in 2015. The watch returned with a chronometer certificate in 2002. Our reading: the 1994 tourbillon told the trade that a large group could still do difficult watchmaking.

The Numbered Edition of 2020

The tourbillon came back in 2020 as the De Ville Tourbillon Numbered Edition. It used a new hand-wound movement, calibre 2640, with a one-minute tourbillon. It was the first Omega central tourbillon certified as a Master Chronometer. That standard requires resistance to magnetic fields of at least 15,000 gauss. The movement runs for three days, and the carriage is made of ceramised titanium. The case measures 43 mm, in Sedna and Canopus gold. Our reading: the 2020 watch kept the 1994 idea and rebuilt almost everything else.

The Prestige in three generations

The Prestige, launched in 1994, is the plain round De Ville that most buyers mean by the name. Omega named it for its contemporary design and slim style. Its case front has a stepped bezel the house calls the "triple apple", also known as a triple gadroon. The case narrows towards the back in a shape called bassine. Roman numerals and a seven-link bracelet complete the look. The quartz models carry a medallion of Chronos, the god of time, on the back. See also: the full set, for what box and papers add to a Prestige.

The 1994 Prestige

The first Prestiges were small by today's standard. Our own De Ville Prestige 4520.51 is a 34 mm steel watch with small seconds at six. It runs on the hand-wound calibre 651 and has no date. Its case carries a second, internal reference, 125.0150. Our reading: an early Prestige is a quiet watch, and its condition matters more than its rarity.

Co-Axial in 2012

The second generation arrived in 2012, with chronometer-certified Co-Axial movements. Those watches used calibres of the 2500 family. Their cases grew to 39.5 mm for the men's models. A steel and gold De Ville Co-Axial chronometer, reference 424.20.37.20.58.001, shows the dial of that period, signed Co-Axial Chronometer. Our reading: the 2012 Prestige is an easy first Co-Axial, and a sensible daily watch.

The third generation of 2022

The third generation of 2022 brought Master Chronometer certification to every mechanical Prestige. It came in six families and five sizes: 41, 40, 34, 30 and 27.5 mm. Four movements power them: calibres 8810, 8800 and 8802, and the quartz 4061. The 41 mm power reserve model uses calibre 8810, with 55 hours of reserve, in a case 10.77 mm thick. Sedna gold replaced red gold, and the dials gained colours such as lavender and sky blue. In Japan the new Prestige went on sale on 27 October 2022, in 138 versions. Our reading: the 2022 Prestige finally gave the plain De Ville the same certificate as the sports watches.

1999: the first Co-Axial

On 12 April 1999 Omega put a new escapement into a De Ville, the first new practical escapement in about 250 years. The design was the work of George Daniels, the English watchmaker. He had worked on it since the 1970s, aiming to cut friction and the need for oil at the escapement. The version he invented in 1976 and patented in 1980 used two escape wheels on one axis. It cut the impulse angle from the lever's 52 degrees to 30 degrees, so the parts slid less. The first watch was the De Ville Co-Axial, with calibre 2500. See also: Zenith and the El Primero, for another Swiss movement that changed its house.

Calibre 2500

Calibre 2500 was a modified version of Omega's calibre 1120, itself based on the ETA 2892. The new escapement added two jewels, and the barrel added two more, for 27 in all. The movement had a free-sprung balance. Omega took one practical step back from Daniels's design: it added a drop of oil. The early versions had teething troubles, which were later fixed. Omega later added a chronograph, calibre 3313, in 2005. Our reading: the 2500 was a careful first step, built on a proven base so the new escapement could be judged alone.

The limited first series

The first Co-Axial De Villes were made in limited numbers. The numbers differ by account. One gives the first plan as 1,000 in yellow gold, 1,000 in red gold and 100 in platinum. Another describes a limited edition of 999 pieces. We print both. A museum example in London, numbered 906 of 999, entered the Clockmakers' Museum collection in 2016. A De Ville Co-Axial 4163.20 in rose gold shows the next step: a power reserve and calibre 2627. Our reading: the first series is the De Ville that changed Omega, and its papers matter.

The Hour Vision and calibre 8500

In 2007 the De Ville again carried Omega's most important new movement, calibre 8500. It was the first Omega calibre built around the Co-Axial from the start. Omega presented it as its first manufacture movement in more than thirty years. It first appeared in the De Ville Hour Vision, a watch with sapphire sides that show the movement edge-on. The 8500 has 202 parts, 39 jewels and two barrels mounted in series. It beats at 25,200 vibrations an hour and runs for more than 60 hours. It measures 29 mm across and 5.5 mm high, and its bridges carry Geneva waves laid in arabesque. See also: Ginza and the watch, for the street where Omega's Tokyo address stands.

From the Hour Vision to the whole house

The current steel Hour Vision, reference 431.30.41.21.02.001, measures 41 mm and 12.2 mm thick. It is water resistant to 100 metres, and its back shows calibre 8500. A gold version, calibre 8501, has a red gold rotor and balance bridge. In 2008 Omega added the Si14 silicon balance spring to resist magnetism. Our reading: the Hour Vision is the De Ville that made Omega a maker of its own movements again.

The Trésor, from 1949 to 2021

The Trésor is the De Ville's dress watch of record, and its name is older than the line. Trésor means treasure. Omega first used the name in 1949, for a slim three-hand watch for men. A 1949 Trésor, reference OT 2659, has an 18K gold press-in case and hand-riveted gold markers. The name returned in 2014 as a 40 mm De Ville Trésor with a clou de Paris dial. It has since moved through steel cases, hand-wound movements and a power reserve. See also: our grading guide, for how a gold dress watch is graded.

1949: the name and the movement

The first Trésor is remembered for its movement as much as its case. One account ties the name to calibre 30, the hand-wound movement designed by Henri Kneuss. Calibre 30 was made from 1939 to 1963 and passed chronometer tests year after year. Omega gives reference OT 2659 an automatic movement, calibre 342. We print both. The two may describe different Trésors of the same period. Our reading: the 1949 Trésor was a name for a family of fine dress watches, so the calibre should be checked case by case.

2014 to 2021

The 2014 Trésor came in gold, at 40 mm, with a Master Co-Axial movement. The calibre is given as 8511 in one account and 8522 in another. In 2019 the Trésor arrived in steel with a hand-wound Master Chronometer, calibre 8910, or 8929 in gold. The 8929 was the first hand-wound movement to gain Master Chronometer certification. In 2021 the Trésor Power Reserve added calibre 8935, with two barrels in series and 72 hours of reserve. A 40 mm steel Trésor with calibre 8934 measures 10.1 mm thick. Its bezel is screwed from behind with four screws, which keeps the case slim and tight. Our reading: the hand-wound Trésor is the closest modern Omega to the slim De Villes of the 1970s.

Japan and the De Ville

Japan shaped the De Ville twice: as its fiercest rival in thin watches, and later as one of its best markets. Seiko's thin quartz of 1978 pushed the Swiss towards the Delirium and the Dinosaure. It was the first Japanese watch to become the focus of high-end American taste. The pressure reached America, where Piaget's importer demanded a thinner movement from the Swiss makers. Our reading: without Seiko's 0.90 mm movement, the Dinosaure would not exist. See also: the Swatch story, for the Swiss recovery that followed.

Ginza and the Hayek Center

On 23 May 2007, the year of the Hour Vision, the Swatch Group opened the Nicolas G. Hayek Center in Ginza. The building stands at Ginza 7-9-18, on the site of the 1960s Pearl Building bought in 2004. Its architect, Shigeru Ban, designed it as a hanging garden, fourteen floors high. The street front is a tall glass shutter that opens a three-floor atrium to the air. The group's brands, Omega among them, sit inside. Our reading: the Hayek Center made Omega's Tokyo address a piece of architecture.

The name in Japanese

In Japanese, the line is written to be read "De Ville", not the closer French "Du". By one recollection, the importer of the day chose the simpler reading because it was easier to say. The spelling has stayed. The 2022 Prestige reached Japan on 27 October 2022, with six models in 138 versions. The hand-wound Trésor measures only 44.8 mm from lug to lug, so it wears small. Our reading: Japanese buyers know the De Ville best as a slim watch, and they judge it by fit.

Know the watch at a glance

A De Ville is dated first by its dial signature, then its case, then its calibre. These are the tells we use when we grade one in Tokyo.

The case back matters as much as the dial. Quartz Prestiges carry the Chronos medallion, while mechanical ones since 2022 have sapphire backs. Ask for the inside reference on older cases, and match it to the calibre. Ask too for the guarantee card, the best proof of a watch's date. See also: our authenticity guarantee, for how we check a case, dial and movement.

The shelf in Japan this week

Japan's De Ville shelf is mostly slim, small and old. In late October 2026 we read the titles of 998 De Ville watches offered in Japan, out of about 3,000. The table rounds what they named.

The modern technical De Villes are rare on this shelf. We saw only a handful of Trésors and a single Hour Vision. Box or guarantee was named in about one title in twenty. Shares are of titles, not of watches, and many titles leave things out. Our reading: Japan holds the 1970s and 1980s De Ville in depth, and the modern ones mostly by request. See also: our private request service, for a reference that is not on our shelf.

The De Ville in dates

Where the record differs

Several De Ville facts are printed two ways, and we give both.

  • The end of the Seamaster De Ville: Omega has the name dropped in 1967, while the catalogue kept it on sale through the 1970s. We print both.
  • The first Trésor's movement: hand-wound calibre 30 in one account, the automatic calibre 342 for reference OT 2659 as Omega gives it.
  • The 2014 Trésor's calibre: 8511 in one account, 8522 in another.
  • The first Co-Axial series: 1,000 yellow gold, 1,000 red gold and 100 platinum as first planned, or a numbered edition of 999.
  • The Dinosaure's thickness: about 1.8 mm for the first version, 1.48 mm for a later one.
  • The Prestige's start: Omega gives 1994, and our own 4520.51 is dated 1993 on its page; we are checking that date against the case reference.
  • Our earlier Omega house history gives the Seamaster De Ville as October 1960, with 1963 in another account; this guide keeps October 1960, when the catalogues first used the name.

What we checked and left out

  • A link between the De Ville name and the American car of the same name: we found none, and we do not speculate.
  • The 2010 Ladymatic: Omega files it under the De Ville today, but we found no record of it as a De Ville at its launch, so we leave its history to another page.
  • Exact production numbers for the Seamaster De Ville and the shaped De Villes: no published figure we could trust.
  • Present prices of any reference, new or old: left out, as on all our pages.
  • The claim that Omega now makes the only self-winding central tourbillon: it can change with any new release, so we leave it out.

Why the De Ville matters

The De Ville is where Omega hides its ambition inside a quiet watch. It began as a Seamaster for the office in 1960 and became its own line in 1967. In the 1970s it carried gold, gemstones and shaped cases, and it answered Seiko's thin quartz with the Dinosaure. Then it became the test bench: the central tourbillon in 1994, the Co-Axial in 1999 and calibre 8500 in 2007. The Trésor and the 2022 Prestige brought that engineering back into a slim case. Our reading: buy a vintage De Ville for its slimness and its gold, and a modern one for its movement. The De Ville is Omega's proof that a dress watch can carry the house's newest ideas first. That is our reading.

Answered plainly

What does De Ville mean?

It is French for "of the town", and it marks Omega's dress watches.

When did the De Ville begin?

As the Seamaster De Ville in October 1960, and as a line of its own in 1967.

Which De Ville had the first Co-Axial escapement?

The De Ville Co-Axial of 1999, with calibre 2500, made first in a limited series.

What is the De Ville Prestige?

The round dress De Ville launched in 1994, renewed in 2012 and again in 2022.

Is the dress Seamaster of the 1960s a De Ville?

Both: it is the dress Seamaster of the 1960s, and the ancestor of the De Ville line.

Seen elsewhere

Further reading

References

Retour au blog

Laisser un commentaire

Veuillez noter que les commentaires doivent être approuvés avant d'être publiés.