Lenses and Mounts: A Field Guide | Japonista

Camera Almanac · The Glass and the Thread

Lenses and Mounts: A Field Guide

レンズマウント

The body is the part of a camera that wears out; the lens and the mount are the parts that outlive it. This guide explains how a mount works, which Japanese mounts matter and why, what the names engraved on the barrels mean, and how to adapt an old lens to a new camera without being surprised.

Fact sheet

SubjectLens mounts and lens care for Japanese cameras
Screw mountsLeica M39, M42
BayonetsNikon F, Pentax K, Minolta SR and A, Olympus OM, Canon EF
OtherCanon FD is a breech-lock; Four Thirds and Micro Four Thirds are bayonets
Key numberFlange focal distance: the mount to the film
Last reviewed28 October 2026

At a glance

  1. Screw or bayonet. Screw mounts are fragile and do not align the lens in a fixed rotational position; modern still-camera mounts are bayonets.
  2. Flange distance. The distance from the mount to the film or sensor, and the main reason mounts are incompatible.
  3. Adapting. A lens can go on a body whose mount sits closer to the film; the other way needs extra glass.
  4. Age shows in glass. Haze, fungus, separation and, in some lenses, yellowing are the faults to look for.
Thesis

Why the Mount Outlives the Camera

A camera body is a machine that ages. Its shutter dries, its foam perishes, its electronics fail, and eventually it is a heavy ornament. A lens, if it is kept clean, goes on working indefinitely, and the part of the camera that connects the two, the mount, decides whether the lens can go on to a second life. This is the quiet argument of the chapter. Over the last two decades, as film bodies grew scarce and mirrorless bodies grew cheap, the old lenses of Japan have been bought up not as antiques but as tools, and what makes a lens useful again is that someone, long ago, chose a mount that has not been entirely forgotten.

The thesis is that a mount is a promise about the future, and that each Japanese maker made a different promise. Nikon promised to keep faith with its bayonet, and largely did. Pentax promised the same and was nearly as consistent. Canon promised an ideal and broke it twice. Minolta promised an ideal and broke it once. Olympus built its mount for a system it then stopped making. The M42 thread, which belonged to nobody, outlived many of the promises made by those who used it.

All facts below come from Wikipedia’s articles on the mounts named, supplemented by the earlier text of this chapter. Where an article gives two dates for the same event we give both.

Basics

Screw, Bayonet and the Distance That Matters

Wikipedia’s article on lens mounts makes the fundamental points briskly. Screw mounts are fragile and do not align the lens in a reliable rotational position; modern still-camera mounts are bayonets, in which tabs on the lens seat in recesses, usually in one orientation, and are locked by turning and held by a spring-loaded pin. A third kind, the breech-lock, uses a friction ring; Canon’s FD mount is of that kind.

Nikon-S-mount. Photo showing the Nikon S-mount on the Nikon SP camera. This lens mount was used in the Nikon interchangeable-
Nikon-S-mount
Photo showing the Nikon S-mount on the Nikon SP camera. This lens mount was used in the Nikon interchangeable-lens range finder cameras and was a copy of the pr
Sshenoy Sudhir Shenoy, CC BY 3.0, via Wikimedia Commons.

The number that governs everything is the flange focal distance, the distance from the mount to the film or sensor. It differs from system to system, and it is the principal reason that mounts do not interchange. Because a lens is designed to form its sharp image a particular distance behind its mount, a lens made for one system focuses correctly only when it sits at that distance from the film.

Micro Four Thirds19.25Leica M39 screw28.80Four Thirds38.67Canon FD42.00Minolta SR43.50Canon EF44.00Minolta A44.50M42 and Pentax K45.46Olympus OM46.00Nikon F46.50Flange focal distance, millimetres. Gold: under 40 mm.Figures from the lens mount table in Wikipedia; see Sources.
How far each mount sits from the film
Flange focal distance in millimetres, drawn from the mount table in Wikipedia; the shorter the distance, the more room for an adapter.
Look closer: Read down the chart. Any lens can be adapted to a body whose mount sits closer to the film, by adding a spacer equal to the difference; going the other way needs glass in the adapter.
Diagram by Japonista. Original drawing, no source image.
Monture d'un Olympus OM-1. Un Olympus OM-1 de face sans objectif montrant la monture de type OM et le miroir interne.
Monture d'un Olympus OM-1
Un Olympus OM-1 de face sans objectif montrant la monture de type OM et le miroir interne.
JBouchez, CC BY-SA 4.0, via Wikimedia Commons.
Asahi Pentax Takumar 135mm f2.5 (AvE)01.
Asahi Pentax Takumar 135mm f2.5 (AvE)01
Alex van Essen, CC BY-SA 4.0, via Wikimedia Commons.
Reference

The Japanese Mounts in Turn

The table gives the main mounts, their type and flange distance as Wikipedia lists them, with the dates our sources support. It is a reference for the rest of this chapter, and the chapters on each maker supply the stories.

Asahi Pentax Takumar 135mm f2.5 (AvE)03.
Asahi Pentax Takumar 135mm f2.5 (AvE)03
Alex van Essen, CC BY-SA 4.0, via Wikimedia Commons.
Asahi Pentax Takumar 135mm f2.5 (AvE)05.
Asahi Pentax Takumar 135mm f2.5 (AvE)05
Alex van Essen, CC BY-SA 4.0, via Wikimedia Commons.
Canon FD 500mm f-8.0 reflex lens. Canon FD 500mm f-8.0 reflex lens, hood retracted. Date of purchase: 1980.
Canon FD 500mm f-8.0 reflex lens
Canon FD 500mm f-8.0 reflex lens, hood retracted. Date of purchase: 1980.
Franz van Duns, CC BY-SA 4.0, via Wikimedia Commons.
Mount Type Flange (mm) Date and notes
Leica M39 (LTM) Screw 28.80 Used by Leica and by Japanese rangefinders such as the Canon 7
M42 Screw, 42 mm, 1 mm pitch 45.46 Praktica, Pentax, Zenit; Contax S of 1949; Pentax Spotmatic of 1964
Nikon F Bayonet 46.5 Introduced 1959; Ai in 1977; AF-S in 1996; still used
Canon FD Breech-lock 42.00 Introduced with the F-1 in 1971; FDn is a bayonet interchangeable with earlier FD lenses
Canon EF Bayonet 44.00 Electronic mount of the 1987 EOS 650
Pentax K Bayonet 45.46 Created in 1975; adapters for M42 lenses
Minolta SR Bayonet (54°) 43.50 SR, MC and MD lenses; SR-T 101 of 1966
Minolta A Bayonet (54°) 44.50 Introduced with the Maxxum 7000 in 1985; Sony A-mount
Olympus OM Bayonet 46.00 OM system, 1972 to 2002
Four Thirds Bayonet 38.67 Sensor 17.3 × 12.98 mm; discontinued 2017
Micro Four Thirds Bayonet 19.25 Panasonic Lumix G1 of 2008; shared with Olympus
A caution about the tableWikipedia’s table carries no inline citations and the article itself says it needs more. We have used it for the distances only, and have taken dates from the articles on the cameras, which give them in the text.
Practice

Putting an Old Lens on a New Camera

The rule for adapting follows from the flange distance. A lens from a system whose mount sits far from the film can be fitted to a body whose mount sits closer, by a plain adapter whose thickness makes up the difference. A Nikon F lens, with a flange distance of 46.5 mm, can be fitted to a Micro Four Thirds body, at 19.25 mm, with an adapter 27.25 mm thick, and it will focus to infinity. This is why mirrorless cameras have become the home of old lenses from every maker.

Minolta CLE and CV 28-3.5. Is it so wrong to want to be buried with a camera??
Minolta CLE and CV 28-3.5
Is it so wrong to want to be buried with a camera??
say_cheddar from Kent, UK, CC BY 2.0, via Wikimedia Commons.

The reverse is the difficulty. A lens made for a mount that sits close to the film cannot be fitted to a body whose mount sits farther away without leaving it too far out; without a corrective element in the adapter it cannot focus to infinity and works only as a close-up lens. Wikipedia’s article describes the corrective lens, which reduces the light reaching the sensor and introduces a crop factor, but its wording on which direction is which is muddled, and we give the standard rule above. A Minolta SR lens, at 43.5 mm, for example, cannot be fitted simply to a body that follows the A mount, at 44.5 mm, and the Canon FD lens, at 42 mm, cannot be adapted to an EF body, at 44 mm, without glass.

Nikon F SLR camera with NIKKOR-S Auto 1,4 f=5,8cm. Nikon F professional SLR camera with early NIKKOR-S Auto 1:1,4 f=5,8cm;own work
Nikon F SLR camera with NIKKOR-S Auto 1,4 f=5,8cm
Nikon F professional SLR camera with early NIKKOR-S Auto 1:1,4 f=5,8cm;own work
Dnalor 01, CC BY-SA 3.0, via Wikimedia Commons.

Two further cautions. Wikipedia notes that non-Ai Nikon lenses can mechanically damage later bodies unless modified to the Ai specification. And adapters with electrical contacts, called active adapters, let the lens and body communicate; passive adapters do not, and the lens must be used at its aperture ring.

Reading barrels

What the Engravings Say

Each Japanese house gave its lenses a name. Nikon’s are Nikkor, a brand Wikipedia dates to 1932; Olympus’s are Zuiko, the first on the Semi-Olympus I of 1936; Asahi’s are Takumar; Minolta’s are Rokkor; Yashica’s are Yashinon; and the Zeiss designs used on the Contax T are the Sonnar. A lens barrel gives its maximum aperture and focal length, often as a ratio such as 1:1.4 and a length in centimetres on early lenses, so that f=5.8 cm is a 58 mm lens, as on early Nikon F standard lenses.

Asahi Pentax Takumar 135mm f2.5 (AvE)08.
Asahi Pentax Takumar 135mm f2.5 (AvE)08
Alex van Essen, CC BY-SA 4.0, via Wikimedia Commons.

Suffixes and prefixes record the lens’s features. On an early Nikon, the word Auto indicates an automatic diaphragm; on a Minolta the letters MC mean meter coupling, as Wikipedia’s article on the SR-T 101 explains. A red T star on a Contax lens indicates Zeiss’s multi-layer coating. On later Takumars the words Super-Multi-Coated appear in the lens name. The glossary gives definitions of each.

Olympus OM-1 & Olympus 1.8 50 mm Lens. Olympus OM-1 & Olympus 1.8 50 mm Lens
Olympus OM-1 & Olympus 1.8 50 mm Lens
Olympus OM-1 & Olympus 1.8 50 mm Lens
Joost J. Bakker IJmuiden, CC BY 2.0, via Wikimedia Commons.
Condition

Haze, Fungus and Yellowing

Lens faults are of four kinds. Haze is a frosted look inside the glass and is, in the opinion of Jim Grey’s careful inspection guide, usually a reason to walk away. Fungus appears as web-like marks; it can sometimes be cleaned, but any etching of the glass is permanent. Separation, in cemented elements, shows as a pattern in the glass and requires professional repair. Oil on the aperture blades, from the lubricant creeping, slows or stops the diaphragm.

Lens fungus. Mycelia (“lens fungus”) on the surface of a lens element. The element is ca. 1 cm in diameter and was taken fr
Lens fungus
Mycelia (“lens fungus”) on the surface of a lens element. The element is ca. 1 cm in diameter and was taken from a broken Revuenon 1:3,5 f=28mm lens.
El Grafo, CC BY-SA 4.0, via Wikimedia Commons.

A fifth fault is specific to certain lenses of the 1940s to the 1960s. A hobby writer on a film-photography website reports that some Takumars, the Super-Takumar 50 mm f/1.4 among them, contain thorium oxide in the glass, which raised its refractive index and allowed smaller lenses with less chromatic aberration; the thorium, he says, is in the glass, not on its surface, and its decay over time turns the glass yellow. The same post carries readers’ opinions about the radiation: that most of it exits through the front of the lens, that the dose is low, and that the main hazard is particles on the surface if they were inhaled or swallowed. These are informal views, not an assessment, and the author concludes that the risk of use is very low. A buyer who is concerned should consult a radiation-safety authority.

Objektiv fungus. Kleinbildkamera-Objektiv mit Fungus (Glaspilz) an der Rücklinse
Objektiv fungus
Kleinbildkamera-Objektiv mit Fungus (Glaspilz) an der Rücklinse
Jakob Ott, CC BY-SA 3.0 de, via Wikimedia Commons.

He also reports that sunlight and ultraviolet lamps are said to reduce the yellow, and that heat from sunlight left a film of condensation inside one of his lenses that did not clear. We offer no instruction beyond the caution that the treatment can do harm.

Fungus on SMC Pentax-D FA 100mm F2.8 Macro WR lens 1. Fungus on an SMC Pentax-D FA 100mm f/2.8 Macro WR photographic lens
Fungus on SMC Pentax-D FA 100mm F2.8 Macro WR lens 1
Fungus on an SMC Pentax-D FA 100mm f/2.8 Macro WR photographic lens
Javier Perez Montes, CC BY-SA 4.0, via Wikimedia Commons.
A bench test for yellowingHold the lens against a white card in daylight and look at the colour of the glass through the barrel. A faint amber tint is common; a deep yellow is the sign to ask whether the lens is the one you want.
Anecdotes

Five Stories of the Thread and the Bayonet

A thread that belonged to nobody. Wikipedia says the M42 mount was developed in 1938 at Carl Zeiss’s Jena plant at the request of the KW camera company for its Praktica line, first used by VEB Zeiss Ikon in the Contax S and by KW in the Praktica in 1949, and that when Zeiss Ikon and KW merged in 1959 the Pentacon brand resulted. It is called the Praktica thread because Praktica cameras made it well known, and the Universal or Pentax thread mount, though Pentax did not originate it. It is a metric thread of 42 mm diameter and 1 mm pitch with a flange distance of 45.5 mm, and it must not be confused with the T-mount, which has the same 42 mm throat but a 0.75 mm pitch.

Minolta SRT101 55mm.
Minolta SRT101 55mm
Hiyotada, CC BY-SA 3.0, via Wikimedia Commons.

The wide-open metering years. The same article lists the screw-mount cameras that metered with the lens wide open, a late-flowering of the thread: the Olympus FTL in 1970, the Yashica Electro AX in 1972, the Ricoh TLS-EE in 1973, the Chinon CE Memotron in 1974 with a silicon metering cell, the Praktica PLC2 in 1975 and the PLC3 in 1977, the Petri-designed Exakta FE 2000 in 1978, and the Praktica EE 2 and EE 3 in 1979. Fujica, Mamiya and Zenit cameras also appear. Pentax moved to its K mount in 1975 and Praktica to its electronic B mount in 1979, and by the early 1980s the thread had fallen out of general use except in the Soviet Zenit range. In 2003 Cosina revived it with the Voigtländer Bessaflex TM, discontinued in 2007.

The mount that Zeiss designed. Wikipedia reports that the Pentax K mount, created in 1975, was originally designed by Zeiss for a planned alliance that failed, and that Pentax kept the mount. It is a simple three-tab bayonet that locks with roughly a 70-degree clockwise turn. The KA mount of 1983 lets the body set the aperture, enabling shutter-priority and program exposure, while remaining backward compatible. The KAF mount adds a drive shaft and a seventh contact; the KAF2 and KAF3 mounts power motor lenses; and in June 2016 the KAF4 mount debuted with the HD Pentax-DA 55–300 mm f/4.5–6.3 ED PLM WR RE, with aperture control moved to an electromagnetic motor in the lens. A curious fact is that no Pentax K-mount lens has had an f/16 minimum aperture, although two newer lenses are exceptions.

134 lenses and one mystery. Wikipedia says the Canon FD lens line in the 1980s included 134 lenses and was one of the most extensive manual-focus lineups ever produced. Canon never officially explained the letters FD; one unofficial explanation, which the article calls unverified, is Focal-plane shutter with Dual linkage for diaphragm control. The first FD lenses appeared in late 1970 and the mount debuted in March 1971 with the F-1, succeeding the FL mount, which had replaced the R mount. The 1978–79 New FD lenses (the article gives both years) are bayonet-style, with the whole lens body rotating, and have a square release button. A 1200 mm f/5.6 L lens was used at the 1984 Los Angeles Olympics and was never sold as an FD lens; its copies were later converted to EF.

The AF experiments. Canon released three AC-series lenses and the T80 in 1985, the only camera that could use their autofocus. The FD 35–70 mm f/4 AF of 1981 was the only FD-mount autofocus lens that worked on all FD bodies, and its autofocus ran on its own internal system. The T60 of 1990 was the last FD-system camera. Pentax’s KF mount appeared only on the ME F body and one lens, the SMC Pentax-AF 35–70 mm f/2.8, and the article observes that it resembles the system in Canon’s T80, which came several years later.

Reference

Mounts and Their Fates

The table below gathers the principal mounts, with the dates from the Wikipedia articles above and the flange distances in the chart earlier in the chapter. The final column states what became of each.

Mount Introduced Maker Fate
M42 1938; first used 1949 Zeiss/KW; used by Pentax, Fujica, Yashica, Mamiya, Zenit Out of general use by the early 1980s; revived by Cosina 2003–07
Nikon F 1959 Nikon Still in use; adapters to Z mount
Canon FD March 1971 Canon Ended 1987; last FD camera the T60 in 1990
Pentax K 1975 Pentax Still in use; KAF4 in 2016
Minolta SR 1958 onward Minolta Replaced by A mount in 1985
Minolta A 1985 Minolta Inherited by Sony
Canon EF 1987 Canon Superseded by RF for mirrorless; still adapts
Four Thirds 2003 Olympus Discontinued 2017
Micro Four Thirds 2008 Panasonic and Olympus In use
Canon RF 2018 Canon In use
Nikon Z 2018 Nikon In use
Practice

Adapters, Cases and Cautions

The earlier section gave the rule. Here are the cases, drawn from the articles. M42 lenses work best on bodies with a flange distance of 45.5 mm or less, which includes Canon EF, Pentax K, Sony E and Fujifilm X. On Nikon F bodies, with a flange of 46.5 mm, infinity focus requires an optical adapter or is lost. Some Takumar lenses can hit the mirror mechanism on Canon full-frame bodies. Smaller sensors produce a crop in the field of view. Fujica and Olympus FTL lenses have a projecting cam and cannot be fully screwed on to a standard M42 body, and Takumars with aperture levers can catch on the slotted mount screws of older bodies such as the Zenit-E and the Mamiya DTL.

Canon FD lenses are the most requested case. Wikipedia reports that the FD flange distance of 42 mm is shorter than most mounts; lenses from systems with longer flange distances can be adapted to it only with corrective optics. FD lenses on EOS bodies need a corrective adapter, which reduces image quality; cheaper third-party adapters reduce it, especially at wide apertures. But FD lenses became popular on Micro Four Thirds in 2008, where the short flange distance of 19.25 mm and the 2× crop halve the field of view relative to full frame, and with the Canon EOS M in 2012 most FD and FL lenses could reach infinity without a corrective element, with manual focus and aperture-priority metering. Canon itself sold a 1.26× teleconverter adapter for EOS bodies, usable only with FD telephotos of 200 mm and longer, at $250; the article says it now sells used for around $1,000. We report the figure as the article’s and make no valuation.

The K mount’s flange distance of 45.46 mm lets M42 lenses work on K bodies through adapters without optical correction, and the article advises that Pentax-made adapters are generally considered safer than some third-party infinity-focus versions. The Ricoh R-K variation has a pin that signals the P setting.

Specialist glass

Lenses You Will Meet and Should Know

A short list of specialist lenses appears in the articles. The Canon FD range included aspherical and fluorite lenses marked AL, Aspherical or Fluorite from 1975 to 1979, which became the single L designation from 1979; Canon now says the L stands for Luxury. There was a 35 mm f/2.8 tilt-shift lens with shift of 11 mm and tilt of 8 degrees, an 85 mm f/2.8 soft-focus lens in which the strength of the effect is adjusted by moving the focus ring, and a Reflex 500 mm f/8 catadioptric lens with a fixed aperture which has no FD signals and must be used with manual or stopped-down metering. The first perspective-control lens for 35 mm was Nikon’s 35 mm f/3.5 PC-Nikkor of 1962, and the Nikon 2000 mm f/11 Reflex-Nikkor weighs 17.5 kg.

Super-telephoto FD lenses were the first to be made with white housings to protect their fluorite elements from thermal stress. The early chrome-nose FD lenses of 1970–73 had S.C. and S.S.C. coatings, and only a few lenses, among them the 55 mm f/1.2 and the 7.5 mm fisheye, carried S.S.C. These details can help a buyer date a lens at a glance.

Modern

Old Glass in the Mirrorless Age

Carl Zeiss relaunched its K-mount line in 2008, the year Hoya bought Pentax, and announced in September 2010 that its ZK lenses would be discontinued that year. Samsung marketed lenses on its GX-series DSLRs, with Schneider-Kreuznach licensing its name to Samsung and Pentax making the glass; Samsung left the camera market in 2017. The Nikon Z mount, introduced in 2018, offers the FTZ and FTZ II adapters through which many F-mount lenses work; Canon’s RF mount of the same year keeps the EF mount’s 54 mm throat but cuts the flange distance from 44 mm to 20 mm.

For a buyer of old lenses the useful facts are therefore few. Check the aperture mechanism. Check for haze and fungus. Check that the mount you are buying matches the body you have. And know that the cheapest lens is not always the cheapest outcome, since an adapter, a chip or a repair may cost as much as the glass. The bench guide covers the inspection; the glossary the words.

Fun facts

Curiosities of the Mounts

Drawn from the Wikipedia articles on the M42, K and FD mounts.

  • The M42 mount is sometimes called a P thread, after Questar’s catalogue terminology.
  • In 1983, when Pentax introduced the KA mount, Tamron upgraded its Adaptall-2 K-mount adapter to a KA version.
  • The AE-1 alone sold over one million units, according to the FD mount article.
  • Technicians have retrofitted FD lenses with Arri PL and Canon EF mounts.
  • Canon’s Lens Mount Adapter B lets FD lenses fit Leica screw-mount cameras, but rangefinder focusing is lost.
  • The Nikon GN Auto Nikkor was the second smallest F-mount lens ever made.
Words

A Small Mount Glossary

Flange focal distance. The distance from mount to film or sensor.

Bayonet. A mount that locks with a partial turn.

Breech-lock. A mount held by a ring; Canon FD.

T-mount. A 42 mm mount with a 0.75 mm pitch, not to be confused with M42.

KA, KAF. Later Pentax K-mount variants with electronic aperture control and autofocus.

L lens. Canon’s designation for its highest-grade lenses since 1979; Canon says L stands for Luxury.

Catadioptric. A lens combining mirrors and glass, such as the Reflex 500 mm f/8.

At the house

The Camera Shelf

The house keeps a small shelf of Japanese cameras, and keeps it honest: at the time of writing it holds Contax T2 compacts with Carl Zeiss lenses, each photographed and described with its condition set out. If a body or lens you want is not there, the concierge desk can look for it in Japan.

Japanese cameras on the shelf

Reader questions

Answered plainly

What is flange focal distance?

The distance from the lens mount to the film or sensor. It differs between systems and is a main reason that mounts are incompatible.

Can I put a Nikon lens on a mirrorless camera?

Usually yes, with a spacer adapter, because a Nikon F lens’s mount sits much farther from the film than a mirrorless mount does. Non-Ai lenses can damage later Nikon bodies, though.

Can I put a Canon FD lens on an EOS camera?

Not simply: the FD flange distance is 42 mm and EF is 44 mm, so an adapter needs a corrective element, which costs light and adds a crop.

What is the difference between screw and bayonet?

A screw mount threads on; a bayonet locks with a partial turn. Wikipedia says screw mounts do not align the lens rotationally.

What is lens fungus?

Web-like growth inside a lens. It can sometimes be cleaned, but any etching of the glass is permanent.

Why do some Takumars turn yellow?

Hobby writers report that thorium oxide in the glass causes yellowing as it decays. The reports are informal; take expert advice on the radiation question.

What is the M42 mount?

A metric screw thread of 42 mm and 1 mm pitch developed in 1938 at Zeiss in Jena and first used in 1949 in the Contax S and the Praktica; Wikipedia says its flange distance is 45.5 mm.

Can I use Canon FD lenses on a mirrorless camera?

On Micro Four Thirds and the Canon EOS M, many can reach infinity focus without a corrective element; on EOS DSLRs they need a corrective adapter.

Can I use M42 lenses on a Nikon F body?

Infinity focus requires an optical adapter or is lost, because the Nikon flange distance of 46.5 mm is greater than 45.5 mm.

What does the L in a Canon L lens stand for?

Wikipedia says it is commonly thought to mean luxury or aspherical, and that Canon now says it stands for Luxury.

Is the Pentax K mount still current?

Yes. The KAF4 variant debuted in June 2016, and Wikipedia describes the K mount as one of two SLR mounts not abandoned when autofocus arrived.

Why are old Takumar lenses sometimes a problem on Canon bodies?

Wikipedia says some Takumars can hit the mirror mechanism on Canon full-frame bodies.

Keep reading

Where next

UpThe Japanese Camera Almanac, the hub this chapter belongs to.
AcrossPentax, Nikon, The bench guide and The glossary use the terms defined here.
Earlier guideJapanese Cameras and Photography Equipment, which asks how to check for lens fungus.
BridgeThe JDM Almanac, for the Japanese habit of building standards that stay in use for decades.
Evidence

Sources and image credits

Last reviewed 28 October 2026. Pictures are public-domain or openly licensed and credited beneath each one; diagrams are drawn by Japonista.

Looking for a lens in a particular mount, or an adapter you can trust? The concierge desk replies within one to three business days.

Return to the Japanese Camera Almanac · Make a private request