Pequignet Watches: Moorea, the Calibre Royal, Morteau and Japan

Pequignet watches: the short answer

Pequignet is a small watch house in Morteau, in the French Jura, founded in 1973 by Émile Péquignet. For its first thirty years it made fashionable watches with Swiss movements, above all the Moorea, a ladies’ bracelet watch launched in 1984. From 2004 a new owner steered it toward high watchmaking, and in 2011 it launched the Calibre Royal, an automatic movement designed and built in Morteau. The cost of that project pushed the company into receivership in 2012 and again in 2016. Since 2017 it has been run by four of its own executives, and since 2021 the family fund Enowe has held the majority.

Our Watch Almanac places the house among the very few French watchmakers that make their own movements. On a map of watchmaking it sits on the French side of a valley whose Swiss side holds Zenith and Tissot, and the distance between those two worlds explains most of its story.

Identification

Look for the name Pequignet written without the accent on the dial, the fleur-de-lys at twelve on the Royale and older manufacture pieces, and, on the Calibre Royal, two flat discs showing the day and the date in a large double window. Seven-digit references such as 9010443 or 7836313 are engraved on the caseback. The quartz Moorea is recognised by its bracelet of oblong interlinks in two or three rows.

Who it suits

The manufacture watches suit a buyer who wants a mechanical movement with a long power reserve and a genuinely original construction, from a house that is not part of a group. The vintage quartz pieces suit a buyer who wants a French jewellery watch of the 1980s and 1990s with a recognisable bracelet. Neither suits a buyer who needs a deep network of service centres in every city.

Émile Péquignet, the self-taught founder

Émile Péquignet came from the Haut-Doubs, the high country along the French side of the Jura, and started in traditional watchmaking at sixteen. He was largely self-taught. When he opened his own business in Morteau he worked as a case maker and assembler: he designed and made the cases himself and fitted quartz and mechanical movements made in Switzerland. The registry still records the company under SIREN 732 820 196 with a registration date of 15 February 1973.

Steel set with diamonds

His early signature was the use of 316L stainless steel, a grade then associated mainly with surgical and medical work, as the case material for jewellery watches, often set with diamonds. The house and its Japanese importer describe him as a pioneer of that combination. It is a claim of priority that is hard to prove, but the pairing of steel and stones became the look of the brand in its first two decades.

Prizes and a public

Pequignet received five Cadran d’Or awards, the French “Golden Dial”, for its ladies’ collections. By the end of the 1990s the watches sold internationally, and men’s and women’s watches were joined by jewellery collections. The house describes this as the period when it became the favourite brand of “a generation of modern and elegant women”, and the secondary market agrees: most vintage Pequignet watches that surface today are ladies’ quartz pieces from these years.

The horseman

Péquignet was also a horse breeder and a trainer of horses that competed in Olympic equestrian events. He put the brand into that world with the same energy he put into cases, reportedly spending about thirty percent of its communication budget on equestrian sponsorship. The horse runs through the catalogue: a horse’s head on a coin on the dials of the equestrian line from 1980, the Equus name, and the harness motif of the Attelage. Among French houses only Hermès, the Paris saddler, has tied its watches as closely to the horse.

Morteau and the border

Morteau sits in the upper Doubs valley, about twenty minutes by road from Le Locle in Switzerland. The whole area belongs to the Jura arc, where clock and watch work was for two centuries a winter trade of farming families before it became an industry. Morteau has a watchmaking school, today the Lycée Edgar Faure, founded to supply the local workshops, and the regional heritage inventory records a dense network of case makers, dial makers and component workshops in the Haut-Doubs.

Across the line

The border shaped the town. About two thirds of working people in the area cross into Switzerland each day, where salaries are higher. Small family houses on the Swiss side, such as Dubey & Schaldenbrand, draw on the same pool of skills, and French firms train watchmakers who are then hired by Swiss ones. A French house that wants to build movements in Morteau has to compete for staff with the manufactures of Le Locle and La Chaux-de-Fonds. In December 2020 UNESCO recognised the craft of mechanical watchmaking on both sides of the Jura arc as intangible cultural heritage of humanity, a joint French and Swiss inscription.

What was lost

The French watch industry was large until the 1970s. Quartz and Asian competition closed most of it, and France Ebauches, the last big French maker of movement blanks, which employed some four hundred people in the Doubs, closed about three decades before Pequignet’s third movement appeared. That gap is what gives a Morteau-made movement its meaning, and why the house calls its project a revival of French manufacture. France gave watchmaking Breguet, whose Paris workshop opened in 1775, yet by the 1980s most French watch names, from the Paris jewellers such as Cartier to fashion houses like Pierre Cardin, relied on movements made elsewhere.

The jewellery watch years, 1973 to 2004

Moorea, 1984

The Moorea was launched in 1984 and quickly became the emblem of the house. Its name comes from Mo’orea, the volcanic island in French Polynesia; the founder often named lines after faraway places, and the catalogue also had Sakkara and Massai lines. The watch is defined by its bracelet, the “maille Moorea”: links joined by oblong interlinks, at first in three rows and later in two or one, often mixing yellow gold and steel. Round and rectangular cases followed, with quartz movements for the ladies’ sizes.

The equestrian lines

The equestrian line, launched in 1980, carried a horse’s head on a coin on the dial. The Equus followed, and the Attelage, launched in 1990, took its design from the harness of a carriage horse. The Attelage strap could be changed by hand without tools, a system the house patented internationally at the time. The model was revived in 2016 and is still made in a reissue with interchangeable straps.

What the period means for collectors

Most Pequignet watches on the secondary market in Japan and Europe are quartz Moorea, Equus and Elegance pieces from these years and their later continuations. They are jewellery watches first, valued for their case and bracelet, and the quartz movements inside are standard Swiss calibres that a competent watchmaker can service. The quartz revolution that destroyed so much of French watchmaking also made this kind of fashion house possible.

The turn to haute horlogerie, 2004 to 2010

On 15 January 2004 Didier Leibundgut bought the company. He came from Zenith in Le Locle, where he had led marketing, and he arrived with a plan the founder had never attempted: to make Pequignet a manufacture with a movement of its own. Émile Péquignet stepped back from the business, and the house describes 2004 as the moment it “took a direction towards haute horlogerie”.

A laboratory in Morteau

The first step was a high watchmaking laboratory in Morteau, equipped for design, prototyping and testing. Accounts date its opening to 2006 or 2008. The core team included the constructor Huy Van Tran, with Ludovic Perez and Philippe Blanchot. The heavy spending on the movement ran from about 2005 to 2011, and by the end it had given the company a laboratory, a set of tools and a body of know-how that outlived the plan that paid for them.

The manufacture, 2010

In 2010 the house opened its manufacture building and showed a prototype of the movement, then called EPM01, at the Basel fair. It was given the name Calibre Royal and planned for production on a scale the company had never known: plans spoke of three thousand movements in the first full year and a capacity of four and a half thousand a year. Those numbers were never reached, and the gap between them and reality is part of the next chapter.

The Calibre Royal, a movement built from a blank sheet

The Calibre Royal (EPM01) was launched in watches in 2011. It is an automatic movement of 13¾ lignes, about 30.6 millimetres across, and only 5.88 millimetres thick for a movement that carries a big day and date, a moon phase and a power reserve display. It runs at 21,600 vibrations per hour on 39 jewels. In its first form it had 298 components, or 318 with the moon phase, and the house counts some 150 tools and eight international patents behind it. The regional heritage inventory has catalogued it as a piece of French technical heritage.

The barrel turned inside out

Its central idea concerns the barrel, the drum that holds the mainspring. In a conventional movement the spring is wound through the arbor at the centre and its force leaves through the toothed drum. In the Calibre Royal the spring is wound through the drum and the force is taken out through a large central arbor that turns between two jewels and is independent of the drum. The house argues that this gives a more even flow of force. It is the first rethinking of barrel architecture in about two centuries, in the phrase used by the house and its importer, and it is the claim on which the movement’s reputation rests.

Power reserve and isochronism

A single large barrel was designed for one hundred hours and is set to run for 88 hours, with the hands kept in their best rate for 72 hours: the amplitude at 72 hours in the vertical position is still 220 degrees. Later versions are quoted at 96 hours. The large barrel, the balance and the oscillating weight are aligned on the centre line of the movement, so the open caseback shows a symmetrical layout, and the escapement, barrel and winding system can each be serviced separately.

The jumping calendar

The day and date are shown on three flat discs and jump instantly at midnight, within a tolerance of about five minutes. Both can be set from the crown alone and there is no forbidden period for setting, a weakness of many calendar movements that can be damaged if adjusted near midnight. The calendar system is one of the patented elements of the movement.

The moon phase

The moon disc is driven by a wheel of 135 teeth. A common moon phase uses 59 teeth and drifts by a day in under three years; the 135-tooth train is accurate to one day in 122.5 years. The rotor is a monobloc weight in tungsten carbide, offset so as not to hide the balance, and on the Royale models it carries the fleur-de-lys.

Why the movement mattered, and its cost

The Calibre Royal was proof that a French workshop could still conceive and industrialise a complex movement. It was also expensive to develop, and the early production movements had reliability problems that led to returns. For a company of about fifty people, the spending, the returns and the slow ramp-up proved too much. It is a familiar pattern among small houses with ambitious movements; Daniel Roth, founded in the Vallée de Joux around 1989, changed owners twice and had passed to Bulgari by 2000.

Two crises and a pair of rescues, 2012 to 2017

Receivership, 2012

Court-supervised receivership (redressement judiciaire) opened in spring 2012. Two French investors, Philippe Spruch and Laurent Katz, the founders of the computer storage maker LaCie, put in money and a continuation plan was adopted later that year for ten years. The company then employed about fifty people. The new owners kept the movement and the laboratory, and the Royale collection continued.

Liquidation and the four executives, 2016 to 2017

The rescue did not hold. The company lost around ten million euros over 2012 to 2014, and on 30 November 2016 it was placed in liquidation. A disposal plan was approved on 27 February 2017, and four of its own managers took the business over at the court’s bar: Aymeric Vernhol, Antoine Commissione, Bernard Espinas and Dani Royer, salespeople and an engineer. They kept the brand, the laboratory and the movement, and returned it to profit; by 2021 it employed about twenty people.

The Calibre Royal Manuel, 2018

In 2018 the house produced a hand-wound version, the Calibre Royal Manuel (EPM02), 31 millimetres across and 5.43 millimetres thick, with one hundred hours of power reserve and small seconds at six. It showed that the original engineering could be reworked into simpler variants, which became the strategy of the next decade.

The Calibre Initial and the question of French content

The Calibre Initial (EPM03) is simpler and smaller than the Calibre Royal, and quicker to make. It measures 28.2 millimetres across and 4.2 millimetres thick, beats at four hertz and runs for 65 hours. It carries two patents, one of them for a semi-instant date change. Its components are made within eighty kilometres of Morteau. It was shown at the Made in France exhibition at the Élysée Palace, and the calibre began appearing in the house’s watches in December 2021, first in the Attitude Or, an inaugural series of one hundred pieces in rose gold.

How French is it?

The answer depends on who is counting and when. The house has given 72 percent of French-made content; the owner and the press around the launch gave about 80 percent. For the Calibre Royal, figures from 60 to 72 percent appear. A watch movement uses some parts, such as jewels, mainsprings and certain screws, that no French workshop now makes at scale, so a figure of one hundred percent is not yet possible. The Calibre Initial comes closer than any recent French movement.

Selling movements to others

The house announced that the Calibre Initial would be offered to other watchmakers who want a French movement from 2022. The aim, in the words of one of the four partners, is to become France’s first “motoriste”, an engine maker for French watch brands.

The Enowe era, 2021 to today

In 2021 Enowe, the family fund of Hugues Souparis, founder of the security printing company Hologram Industries (now Surys), became the majority shareholder with eighty percent. Three of the four executive partners kept the remaining twenty percent, and Souparis became chairman. Sales rose by about fifty percent in 2021. In interviews from those years the house put exports at between a quarter and about thirty percent of production, with Japan and the Benelux named as its two key markets abroad.

Labels and recognition

The company holds the French state label Entreprise du Patrimoine Vivant, first awarded in 2014 and renewed in 2019 and 2025. The label goes to firms with rare craft skills.

Fifty years, 2023

The house marked its fiftieth anniversary in 2023. It launched the Concorde, an integrated-bracelet sports watch in 40 and 36 millimetre sizes with the Calibre Initial, whose spearhead-shaped links refer to the obelisk on the Place de la Concorde. It showed at Watches and Wonders in Geneva for the first time, adopted a new logo without the fleur-de-lys, and opened its first boutique at 60 rue de Rennes in Saint-Germain-des-Prés, after a pop-up on the same site in the winter of 2022.

The tourbillon, 2024

In 2024 it presented the Royale Tourbillon, its first flying tourbillon: twenty-four pieces in a 44 millimetre case of 5N rose gold, powered by the Calibre Royal Tourbillon, 34.5 millimetres across and 6.11 millimetres thick, with a titanium cage of 157 parts, 23 jewels and 88 hours of power reserve. The same year it relaunched the Moorea for its fortieth anniversary with eight references: five at 25 millimetres with a two-row bracelet and three at 38.5 millimetres with a three-row bracelet and, for the first time in the line, the Calibre Initial.

New hands and a chronograph

Patrick Zing, born in Biel in 1972, who had worked at the Swatch Group and then at Graham, became managing director in 2024. At Watches and Wonders 2025 the house showed the Royale Paris II, a version of the Royale under 40 millimetres. In 2026 it launched the Calibre Initial Chronograph, and the house presents the Royale Paris Chrono as its first manufacture chronograph.

The collections at a glance

Movements and references

The house uses seven-digit references, sometimes with a suffix after a slash for a dial or strap variant. The table below gathers the movements a collector is most likely to meet and the figures that identify them.

Reading a Royale reference

The manufacture references we see most often begin with 90. A Rue Royale tested in the French press as reference 9010443 measures 42 millimetres across and 12.44 millimetres thick and is water resistant to 50 metres. Pieces sold through Japanese distribution, such as 9080413, 9080433 or the Royale Paris 9001438, usually come with the importer’s guarantee card in addition to the house’s own papers.

Reading a quartz reference

Quartz Moorea references are also seven digits; a ladies’ steel Moorea of 36 millimetres, for example, carries 7836313. The first digits indicate the family and the case, the last digits the dial and bracelet. A slash suffix usually marks a variant.

The Japan thread

Pequignet has an unusually close relationship with Japan for a house of its size. Since 2013 its exclusive importer has been Calibre Vingt et Un Co., Ltd., a company founded in Tsukiji, Tokyo, on 3 September 2013 to bring in the manufacture watches. The importer runs an after-sales counter in Hamamatsucho, and the watches are sold through department stores and specialist retailers, among them Nihonbashi Mitsukoshi and Isetan Shinjuku. Our guide to Ginza and the watch explains why the department-store counter remains the place where Japanese buyers meet a small European house.

Japan in the manufacture story

Japan was one of the two markets to receive the first one hundred numbered Calibre Initial watches in December 2021. The Royale Paris II, the version under 40 millimetres shown in 2025, began as a Japanese proposal about ten years earlier, the importer recalls. The request was for the Royale in a case under 40 millimetres. Pequignet’s new managing director made his first visit to Japan in 2026.

Japan-only pieces

From 1 October 2023 the importer offered a Japan-limited Royale Saphir Perlage, reference 9010801: twenty pieces in all, seventeen in steel at 42 millimetres and 12.3 millimetres thick, water resistant to 100 metres, with a perlage-decorated Calibre Royal, and three in 18 carat red gold with a chronometer certificate from the Besançon Observatory. In April 2025 all ten pieces of a Royale Paris “Étoile” series shown at Watches and Wonders, with applied yellow indexes on a steel case, were secured for Japan.

How Japan reads the brand

In Japan the manufacture watches are presented as the French alternative to Swiss high watchmaking, a niche well served by Japan’s own makers. A collector who knows Grand Seiko and Credor or the Japanese independents will recognise the appeal: a small workshop, its own movement, finishing it can explain. The vintage quartz Moorea pieces are a separate market, mostly ladies’ watches bought new in Japan in the 1980s and 1990s and often kept in the box since.

The Attitude Impériale, 2026

On 2 April 2026, during the French President’s state visit to Japan, the Élysée announced that France’s gift to Emperor Naruhito was a unique Pequignet watch, which the house names the Attitude Impériale. Pequignet is a partner of the Élysée’s own brand, and a display copy of the watch went on show at the Maison Élysée, 88 rue du Faubourg Saint-Honoré in Paris.

The dial

The dial was painted in miniature by the artist Philippe Jacquin-Ravot. It shows two intertwined branches meeting at the centre: oak for France and cherry blossom for Japan. For this piece the house replaced its usual fleur-de-lys with the “RF” monogram of the French Republic on the movement, the crown and the clasp.

The movement and the makers

Inside is the Calibre Initial, with a chronometer certificate from the Besançon Observatory. The blued steel hands came from the La Pratique workshops in Morteau, the alligator strap was hand-stitched by the Jean Rousseau manufacture, and the box, in white lacquered wood and pale grey suede, was made by France Étuis of Besançon. Inside the box is the inscription “Offered by Mr. Emmanuel Macron, President of the French Republic.” For a house that nearly closed twice in a decade, it is the clearest sign of its standing in France, and it ties the brand to Japan more visibly than any limited edition.

Timeline

Video: inside the Morteau workshop

The house’s own film on its savoir-faire shows the laboratory and workshop in Morteau, from component work to assembly and regulation. It is the quickest way to see the scale of the operation: a small team, a modern workshop and a movement assembled by hand.

Where the records disagree

When the laboratory opened

One encyclopaedic account dates the high watchmaking laboratory to 2006, while the house history gives 2008. The earlier date may mark the start of the movement project and the later one the formal opening.

When the Calibre Royal was finished

Some accounts say the movement was completed in 2009; the prototype was shown in 2010 and the first watches were delivered in 2011. All three dates appear as “the year of the Calibre Royal”.

When receivership began, and the plan that followed

The registry records the opening of receivership on 26 April 2012; another account gives March 2012. Press reports of the rescue are dated July 2012, while the registry gives 5 November 2012 for the adoption of the ten-year continuation plan.

Who Didier Leibundgut was

He is described both as Zenith’s marketing director and as the former head of Zenith. We use the narrower description.

When the founder retired

The Japanese importer dates the founder’s retirement to 2000, while the sale of the company is dated January 2004. He may have stepped back from daily work before he sold.

The Calibre Initial’s year and content

The Calibre Initial is dated to 2020 in some reports and to 2021 by the house; 2020 may be the unveiling and 2021 the first deliveries. Its French content is given as 72 percent by the house and the Élysée and as about 80 percent by its owner at the time of the takeover.

The fiftieth anniversary

The house celebrated fifty years in 2023, counting from 1973. One Japanese feature describes 2024 as the anniversary year; we follow the house.

A sceptic’s view

A careful buyer should hold three reservations. First, the Calibre Royal is an original movement from a small workshop that went through two insolvencies; early examples had reliability problems, and parts and service depend on one company in Morteau and its importers. Second, “made in France” is a matter of percentages, and the figures quoted vary with the speaker and the year. Third, the vintage quartz pieces were fashion watches; the bracelet and case carry their value, and a missing link or a worn plating cannot easily be replaced.

Against that, the house has survived, kept its laboratory and its people, and has added a hand-wound version, a second calibre, a tourbillon and a chronograph since 2017. It offers a five-year warranty on its in-house movements and three years on others, and its Japanese importer runs a dedicated service counter in Tokyo. For a buyer in Japan or buying from Japan, that support is better than for most small European houses.

Checks for collectors

Papers and cards

For a manufacture piece, ask for the house certificate and, for a watch first sold in Japan, the importer’s guarantee card, which records the reference and serial number. A complete set with box, papers and card is worth more, as our guide to the full set explains.

Movement and calendar

On a Calibre Royal, check that the day and date jump cleanly at midnight, that the power reserve indicator falls as the watch runs, and that the moon phase advances. A recent service record from the house or the Tokyo counter is reassuring for early movements of 2011 and 2012.

Bracelets and plating

On a quartz Moorea, count the links and check the interlinks for stretch and the gold plating or gold parts for wear. Extra links are hard to find, so ask whether they come with the watch.

Condition grades

Japanese dealers grade watches on a scale that is stricter than many European ones. Our guide to Japanese condition ranks explains what N, S, A and B mean, and our guide to import duties covers the cost of bringing a watch home.

Where to look

Our collectible watches shelf carries the Pequignet pieces we have found in Japan, each checked under our authenticity guarantee. If you are looking for a particular reference, such as a Royale with the moon phase or a three-row Moorea, our Hunting Salon will search for it in Japan.

Frequently asked questions

Further reading

References

Volver al blog

Deja un comentario

Ten en cuenta que los comentarios deben aprobarse antes de publicarse.