Daniel Roth Watches: Double Ellipse, Tourbillon and Papillon

The short answer

Daniel Roth is a Swiss watch brand founded in the Vallée de Joux by the French-born watchmaker of the same name. Before he set up on his own, Roth led the watchmaking at Breguet from the mid-1970s to the late 1980s, and the guilloché dials, coin-edge cases and blued hands now taken for granted as the Breguet look owe much to his bench. His own brand, launched in 1988 or 1989, kept those details but placed them in a new case shape, the double ellipse, and built a catalogue of complicated watches around it. Our watch almanac of houses, family trees and references places Daniel Roth among the other watch houses.

The firm changed hands twice in six years. A Singapore watch group took a majority stake in 1994, later merged it with the Gérald Genta house, and in 2000 sold both to Bulgari. Roth left after a year and began again as Jean Daniel Nicolas, making two or three watches a year. Bulgari used the name and case until the mid-2010s, then let it lapse. In 2023 the LVMH group, which had owned Bulgari since 2011, revived Daniel Roth at La Fabrique du Temps Louis Vuitton, beginning with a twenty-piece tourbillon.

For a collector, the brand falls into four parts: the founder's own watches of roughly 1989 to 2000, the Bulgari years to about 2015, the founder's later Jean Daniel Nicolas pieces, and the revival from 2023. This guide takes each in turn and ends with practical notes on finding a good example in Japan.

A boyhood by the Mediterranean

Roth's family had Swiss roots. His grandfather and great-grandfather were watchmakers in Neuchâtel before the family moved to the south of France, where his father kept a repair workshop in Nice. The boy grew up at that bench, took a three-year watchmaking course in Nice and, by most accounts, heard his teachers speak of the Vallée de Joux as the home of complicated watchmaking. His year of birth is given as 1945 or 1946, and one record places his birth in Nantua, in the Ain, rather than in Nice.

Seven years in Le Brassus

He crossed into Switzerland in 1967 and settled in the valley. After a short spell at Jaeger-LeCoultre in Le Sentier, then known for very flat movements, he joined Audemars Piguet, the house of the Royal Oak, and stayed about seven years. He later recalled being the only watchmaker there who was not from Le Brassus, and asking to work in every department, including after-sales service, where he learned to make replacement parts for old watches by hand. That training in restoration would matter more than anything else he learned there.

Back to school in Le Sentier

When Breguet's new owners looked for a watchmaker, Roth applied with a two-page CV: one page of what he could do and one of what he still had to learn. They hired him and paid for a year at the watchmaking school in Le Sentier. His school piece, a perpetual calendar pocket watch, was sold to help fund that year. The valley he joined is small; Le Sentier is a village of about three thousand people in the commune of Le Chenit, yet it hosts some of the most famous names in Swiss watchmaking, among them Vacheron Constantin.

Rebuilding Breguet, 1975 to 1987

In the early 1970s Breguet was a shadow of its founder's firm: a small Paris house making perhaps a hundred watches a year. The Brown family, who had owned it for about a century, sold it in 1970 to Jacques and Pierre Chaumet of the Paris jewellers. Their manager, François Bodet, set out to make the finest watches possible and brought in Roth, with the prototypist Louis-Maurice Caillet. The year Roth arrived is given as 1973 or 1975. In 1976 production moved from France to the Vallée de Joux.

The Chaumet brothers' gamble

Restarting a mechanical house in the middle of the quartz crisis was a bold wager. Gérald Genta had already drawn some early designs for the brothers, but it was Roth who defined the range that followed. He studied Abraham-Louis Breguet's own pieces, including the pocket watch No. 5, and translated their manner to the wrist rather than copying any single model. The approach worked for the watches; it did not save the Chaumet business, which collapsed under heavy debts in 1987.

A vocabulary for the wrist

The elements Roth assembled became the house grammar: engine-turned dials cut on hand-operated lathes, coin-edge cases, hollow-tipped blued hands, chapter rings with circular graining. Movements came from Lemania and Frédéric Piguet. The first complications were bold choices for a small company: the ref. 3050 slim perpetual calendar, at a time when such watches were rare outside Patek Philippe and Audemars Piguet, and the ref. 3237 chronograph on the Lemania 2320. The ref. 3130 with its asymmetric dial, the ref. 3330 triple calendar and the time-only ref. 3210 followed.

Reference 3350 and the dial aperture

The most influential was the tourbillon ref. 3350. With a one-minute carriage fully visible through an opening at six o'clock against an engraved plate, it fixed the layout most later wristwatch tourbillons would follow. The movement was developed with Lemania. When Breguet passed to the Bahrain-based private equity firm Investcorp in 1987, Roth found the new owners ill-suited to running a watch house, and he left about a year later. In all, he had spent about fourteen seasons there.

A house of his own

Roth registered versions of a brand name in 1987 and settled on his full name in 1988. The company is usually dated to 1988, the year of its first commission, though several accounts give 1989, the year the first watches were delivered and tested. He worked from Le Sentier, a short walk from the school where he had retrained, and his early output was small: one estimate puts it at close to five hundred watches a year at its height.

A backer born in Yokohama

The money came from Siber Hegner, a Zurich-based trading and distribution group with deep roots in Asia. The firm had begun in 1865 as Siber & Brennwald in Yokohama, founded by Caspar Brennwald, who had travelled with Switzerland's first trade mission to Japan, and his partner Hermann Siber; it soon opened an office in Edo, the future Tokyo. More than a century later it became part of DKSH. Its support let Roth start quickly, but it did not last. When the backer withdrew in the early 1990s, he was left without his main distributor.

Asprey and the first commission

The first serious order came from the London house Asprey, then run by John Asprey: a run of yellow-gold tourbillons signed with the Asprey name on the dial, sold on a subscription basis, with clients paying a deposit and waiting for delivery. The count is given as twenty-five or twenty-four. One example now in a private collection was tested by the official Swiss chronometer bureau in April 1989, which makes it one of the earliest. Each of these watches took more than four hundred hours and contained 149 parts.

Squaring the circle

The case was Roth's own idea, drawn first in watercolour like all his early designs. Seen from above it is a cross between a circle and a square, with a stepped, rounded bezel and straight, angular lugs soldered to the middle by hand. It was designed to frame the tourbillon at six o'clock while leaving room for the hour dial above. The house later called it the double ellipse; Bulgari used the name Ellipsocurvex. Every movement bought in as a blank had to be given a base plate cut to fit the shape.

The first catalogue, 1989 to 2000

Within six or seven seasons Roth had covered most of the great complications, nearly always in the same case. Almost every movement of this decade was a Lemania design, reworked and finished by hand. He knew the Lemania calibres from Breguet, and Nouvelle Lemania remained the main maker of complicated movements for Breguet until Breguet bought it in 1992. Later, the firm also used the thin automatic calibre 3000 of Girard-Perregaux and, for its automatic chronographs, the El Primero of Zenith.

Two faces and three hands

The tourbillon, ref. 2187, known in the workshop as C187, was the flagship. Its dial combined a Clous de Paris guilloché field, an off-centre hour dial and a one-minute carriage carrying three blued seconds hands of different lengths, each sweeping its own 120-degree scale in turn. The reverse of the double-faced version showed a power reserve and a date. The base was a Lemania tourbillon calibre, numbered 387 in one account, that Roth had helped develop at Breguet. Single-sided and skeleton variants followed in the early-to-mid 1990s, and a stainless steel series of twenty was made for Italy. For a time these were the only tourbillons certified by the Swiss chronometer bureau.

Chronographs on Lemania calibres

The two-register hand-wound chronograph, ref. 147 or C147, arrived around 1990 on the Lemania 2320, the same base later used by other fine houses, and became one of the best-selling models. Most have a pinstripe dial; some have Clous de Paris; a pink-gold version with a pink dial is the scarcest. A split-seconds chronograph used a small stock of new-old Venus 179 calibres, and a monopusher with a sweeping minute hand used the Lemania 2220; only 52 of those were made, in two metals.

Extra Plat and a hand-wound sibling

Roth loved slim watches. The automatic Extra Plat, ref. 107 or C107, presented in 1990, used the Frédéric Piguet 71 with its off-centre rotor, a calibre about 2.4 mm thick that he had already used at Breguet. The hand-wound C167 used the Frédéric Piguet 21, at about 1.73 mm, which allowed a slimmer case still.

A fan-shaped hour

The C127, shown at Basel in 1991 and delivered from 1993, has a jumping retrograde hour that sweeps across a fan-shaped scale and springs back at six without ever covering the small seconds below. It was inspired by a pocket watch by George Daniels, the Breguet scholar, and used a modified Lemania 27LN hand-wound movement.

An instant calendar, made with a neighbour

For the perpetual calendar C117, Roth worked with Philippe Dufour, who lived a short distance away in Le Sentier, on an instantaneous version in which every indication jumps at midnight. An early prototype with apertures drained too much power, so the pair moved to subdials on a Lemania 8810 base. Both semi-instantaneous and instantaneous versions appeared in 1993. Later examples moved to the Girard-Perregaux 3000 base, with a gold rotor weighted in platinum.

Three repeaters and a butterfly

The minute repeater C189 of 1995, on the Lemania 389, was made three times, once in each colour of gold. The Papillon, ref. 317, celebrated the brand's tenth anniversary with a jumping hour and two retractable minute hands that pivot like wings. It was limited to 250 pieces: 110 in rose gold, 110 in white gold and 30 in platinum. Its launch is dated to 1998 or 1999, and it is usually counted as the last watch Roth conceived for the company.

Singapore, Brunei and a sale

Roth's gifts at the bench, one profile observed, were not matched by his business skills. Once the first backer had gone, the company needed a new partner quickly.

Under the Tay family

In 1994 a Singapore watch group controlled by the Tay family took a majority stake; some later summaries give 1997 instead. Two years on, the same group took control of Gérald Genta and placed the two houses in one company, Manufacture de la Haute Horlogerie. In 1998 production of both was consolidated in one workshop in Le Sentier, which is why a slim minute repeater and a grande and petite sonnerie with perpetual calendar carry the Daniel Roth name but use movements first developed by Genta.

Losing a royal client

The group's largest customer was the Sultan of Brunei, and sales to the sultanate stopped in 1997. The Asian financial crisis followed, and the owners chose to concentrate on retailing. In March 2000 a sale of both brands to Franck Muller fell through. In June 2000 Bulgari announced it had agreed to take over Gérald Genta and Daniel Roth for 37.6 million Swiss francs, plus a payment linked to results over seven years. Genta had made four to five thousand watches in 1999; Daniel Roth about a thousand. Sixty people worked between Le Sentier and Geneva, and the Singapore group stayed on as exclusive distributor in Asia.

Under Bulgari, 2000 to 2015

Roth stayed for a one-year fixed-term contract. He has said that the production manager wanted him out, and that he left as soon as the twelve months were up, giving up his remaining shares. For the next decade and a half the name belonged to Bulgari, the Roman jeweller founded in 1884, whose own watch line is covered in our guide to Bulgari watches, from Serpenti to Octo.

Metropolitan, Athys and eight days

The Le Sentier workshop kept producing ambitious pieces. A chronology kept by one specialist records the Metropolitan, with a simplified display of time zones, in 2000; a double-faced tourbillon with an eight-day reserve in 2002; a tourbillon with retrograde date in 2003; a self-winding grande sonnerie tourbillon with Westminster chime in 2004; an Ellipsocurvex minute repeater and Papillon in 2005; the Athys line in 2006; and the openworked Tourbillon Lumière in 2007. The Papillon chronograph followed in 2008.

Carillon and Voyageur

From about 2010 the watches were presented as the Bulgari Daniel Roth collection. The Carillon Tourbillon of 2012, calibre DR3300, struck the time on three hammers rather than the usual two, with gongs shaped to the case; thirty were made in pink gold. The Papillon Voyageur of the same year added a second time zone and a jumping local hour to the butterfly display, in a numbered edition of 99.

A signature folded away

LVMH bought Bulgari in 2011. The Daniel Roth signature was gradually absorbed into the wider Bulgari range, and production stopped altogether in about 2015, though several accounts say it ended earlier. For some years the brand's own web address simply redirected to Bulgari.

Jean Daniel Nicolas, from 2001

In 2001, at fifty-five, Roth started again, this time with his family under the eaves of his house in Le Sentier. The new name, Jean Daniel Nicolas, joins his own first name to those of his son and his wife; one account gives his wife's name as Nicole. Bulgari owned his surname as a trademark, so it could not appear on the dial.

A two-minute carriage

The single model is a tourbillon whose carriage turns once every two minutes rather than once a minute. Roth's reasoning was practical: a one-minute carriage can only show seconds on a full circle, which the dial did not allow, hence the three hands of the old C187. A two-minute carriage can show the seconds on a half-circle with a pair of hands. The watch comes in a round case and a violin-shaped one. He drew the plans, bought in a few blank movements for the heavy work and made almost everything else by hand; the first movement took two to three years, and the first finished watch is dated to 2003 or 2005. The chamfering of the bat-wing tourbillon bridge alone takes about ten days.

A small order from Japan

Roth has said that he could make that new start because a watch house in Japan that carried only independent makers placed a small order. It is a modest detail in a long career, but it shows how early Japanese buyers took independent watchmaking seriously, a story we follow in our guide to independent watchmakers in Japan. Production has never exceeded about three watches a year, and they are spoken for before they reach a showroom.

Revival at La Fabrique du Temps

In November 2022 the dormant web address began showing a holding page, and Jean Arnault, the youngest son of the LVMH chairman, was reported to be working on a revival. It was announced in 2023. The work was given to La Fabrique du Temps Louis Vuitton in Meyrin, near Geneva, the workshop founded in 2007 by Michel Navas and Enrico Barbasini, bought by Louis Vuitton in July 2011 and moved to Meyrin in 2014. Both men had known Roth for years, and the revival had his approval. The house that sells the brand also makes the trunks in our guide to antique Louis Vuitton trunks.

The twenty subscribers

The first watch, the Tourbillon Souscription, ref. DR0011YG-01, revived both the C187 design and its way of selling: twenty clients paid a deposit and waited. The case keeps the original 38.6 by 35.5 mm footprint in 18k yellow gold but is 9.2 mm thick, about 2 mm slimmer than the 1990s watch, with lugs reshaped to curve downward. The solid gold dial, made with the workshop of Kari Voutilainen, carries Clous de Paris guilloché and the watch number. The new calibre DR001 has a one-minute tourbillon, 206 parts, 19 jewels, a frequency of 3 Hz and about 80 hours of reserve, behind a closed back. A prototype appeared at LVMH Watch Week in January 2024, and deliveries were planned for the first half of that year.

Pink metal and a sapphire back

At Geneva Watch Days in September 2024 came the Tourbillon Rose Gold, in 5N gold with a linear guilloché dial and, for the first time in the revival, a sapphire back showing the DR001 with black-polished steel and Côtes de Genève. It is not a numbered edition, but output is held to about fifty a year, largely because of the hand guilloché. A platinum version followed.

Two hands and a slimmer profile

In January 2025 the Extra Plat Souscription revived the slim dress watch Roth had first shown in 1990. It has the same length and width as the tourbillon, a case 7.7 mm thick in 3N yellow gold, a solid gold dial and a new hand-wound calibre, DR002, at 4 Hz with about 65 hours of reserve, 143 parts and 21 jewels, 3.1 mm thick. Twenty were made. A rose-gold Extra Plat followed, faithful in size to the original ref. 2107, with a white-gold pinstripe dial.

A prize in Geneva

In November 2024 the Tourbillon Souscription won the Tourbillon prize at the Grand Prix d'Horlogerie de Genève, a fitting honour for a design first made in 1988.

Models at a glance

Telling the eras apart

Because the case barely changed, the dial, movement and papers do most of the work in dating a Daniel Roth. Our watch almanac of houses and references gives the wider family tree.

Signatures and calibres

Founder-era watches, roughly 1989 to 2000, read Daniel Roth alone and use Lemania, Frédéric Piguet, Girard-Perregaux or Zenith bases. Asprey tourbillons carry the London name as well. From about 2010, Bulgari pieces often show the Bulgari signature with Daniel Roth as a collection name, and some use house calibres with DR numbers, such as the DR3300. Revival watches read DANIEL ROTH in capitals, carry a DR00x calibre and, for the subscription series, a number from 01 to 20 on dial, back and movement.

Proportions and lugs

Original cases have straight, angular lugs and are around 11 mm thick in tourbillon form. The revival cases have lugs that arch downwards and a middle band that splits the case evenly. Some Bulgari-era watches are larger; the Carillon Tourbillon measures 43 mm. If in doubt, our guide to Japanese condition ranks helps decode how a piece has been described.

Daniel Roth and Japan

Japan touches this story at three points. The first is the backer: the trading house that funded the 1988 start was born in Yokohama in 1865, in the first years of Swiss trade with Japan. The second is the second start: a watch house in Japan devoted to independents gave Roth the small order that helped him launch Jean Daniel Nicolas. The third is the revival, presented to Japanese readers by Louis Vuitton Japan in press releases of February and September 2024 and covered at length in the Japanese watch press, where the brand's 1994 sale and the 1990s chronographs and calendars were explained for a new audience.

Why good examples appear here

Japanese owners are known for keeping fine watches with care, often with every card and box, as our essay on how Japan keeps watches in the box describes. That habit, and the importance placed on papers, is why the country is so useful for this kind of hunt; our guide to why Japan suits pre-owned luxury explains the background. Daniel Roth pieces still surface only rarely, often a strap or a single gold watch at a time.

Ginza and the valley

The streets described in our guide to Ginza and the watch are where many fine Swiss watches have long been sold new in Tokyo. The record of who first owned a given Daniel Roth is usually thin, so we treat any claim of Japanese first ownership as a story to check against papers.

On film

The short film below looks closely at the platinum Tourbillon of the revival: the double-ellipse case, the three-armed seconds and the DR001 movement shaped to the case.

Where the records disagree

Even a short history carries contradictions. We give the readings we found and the one we prefer, and we would rather leave a date open than invent certainty.

Why the gaps exist

The early firm was tiny, its papers passed through three owners in a decade, and much of what is written today rests on Roth's own recollections, given decades later, and on later house histories. Where a date matters for a particular watch, the chronometer certificate, the movement number and the original papers are better guides than any summary, as our note on documentation as value explains.

The case against

Not everyone warms to these watches. The double-ellipse case is an acquired taste; one hands-on review called the look old-fashioned while praising the finish. Founder-era movements are reworked Lemania and Frédéric Piguet calibres rather than ground-up designs, and the revival's watches come from a large luxury group, not from Roth's bench. Parts for 1990s pieces can be slow to obtain, since the original company has changed hands so often. And because so few were made, a reader may wait a long time for the right example.

Against that: the case is genuinely original, the finishing of the early watches stands comparison with far better-known names, and the C187 and C117 were serious pieces of horology in their day. The revival has, so far, respected the design rather than diluting it.

Choosing well from Japan

A Daniel Roth is a watch to buy slowly. Decide first which era you want, then judge each example on its own condition and history.

Condition and service

Check that the case edges and the stepped bezel are crisp, since heavy polishing softens the double ellipse quickly. Ask when the watch was last serviced and by whom; complicated pieces need a watchmaker who knows Lemania tourbillons and calendars. Our grading and condition guide sets out how we describe wear, and every watch we offer is covered by our authenticity guarantee.

Papers, boxes and certificates

For a tourbillon, a chronometer certificate is part of the story. For any example, matching numbers on papers, case and movement add confidence. Our guide to box and papers explains why a full set matters, and in Japan such sets survive more often than elsewhere.

Bringing it home

Our notes on import duties on luxury goods from Japan cover the practical side of sending a watch abroad, and we handle the paperwork for every piece.

Questions readers ask

Is Daniel Roth still made?

Yes. After a pause from about 2015, the brand was revived in 2023 and is made at La Fabrique du Temps Louis Vuitton near Geneva.

Did Roth design the modern Breguet look?

He led Breguet's watchmaking from the mid-1970s to the late 1980s and shaped most of its modern wristwatches, including the tourbillon ref. 3350, building on earlier work by Gérald Genta.

What is the double-ellipse case?

A case Roth drew himself, part circle and part square, with a stepped bezel and soldered lugs. Bulgari called it Ellipsocurvex.

Which Daniel Roth watches did the founder make himself?

Those made from about 1989 to 2000. The Papillon is usually counted as the last he conceived for the company.

Who owns the brand today?

LVMH, through Bulgari, which bought it in 2000. The revival is run with La Fabrique du Temps Louis Vuitton.

What is Jean Daniel Nicolas?

The family firm Roth founded in 2001 after leaving his old company. It makes about three two-minute tourbillons a year.

How does a Bulgari-era example differ?

It usually carries the Bulgari signature or both names, a house calibre numbered DR, and often a larger case.

Further reading

References

The Japonista Curation and Concierge Team, Tokyo, Japan

Volver al blog

Deja un comentario

Ten en cuenta que los comentarios deben aprobarse antes de publicarse.