Epos Watches: the Verso, the Hebdomas 8 Jours, Hundertwasser and Japan

In our Watch Almanac of houses, family trees and references, Epos belongs to a small group: a young name with an older workshop behind it, family owned, and never part of a group. It has always worked in the middle of the market, with complications at a level most collectors can reach, and it grew steadily in Asia, where Swiss mechanical watches were in demand. For a collector in Japan the brand means skeletons and open hearts, the Verso, the Hebdomas 8 Jours, a Japan-only vintage line with a doctor's watch and an octagon, and a handful of limited series. Knowing which family a watch comes from, and which base calibre sits inside it, is most of what it takes to buy one well.

Epos in brief

Origins

James Aubert and his workshop

The roots of Epos go back to 1925, when James Aubert founded James Aubert SA in the Vallée de Joux. The valley lies in the Jura mountains, mainly in the canton of Vaud, about 48 kilometres north of Geneva, at a mean elevation of over 1,000 metres. Aubert was a movement engineer who spent most of his effort on chronographs and minute repeaters, the striking mechanism that sounds the hours, quarters and minutes on demand. He had learned his trade as an engineer at two movement makers, Valjoux and Landeron. Valjoux, whose name comes from the valley itself, is still a maker of chronograph movements and today belongs to the Swatch Group.

Fillon and the next generation

Aubert handed his knowledge down to his nephew Jean Aubert and to his son-in-law Jean Fillon. Fillon became the leading watchmaker behind Epos for many years, and in his workshop the house developed its own complications. Fillon is also reported to have worked with Johannes Jahnke on a single-pusher chronograph platform for the Unitas 6497, sold as the JJ02 calibre by MeisterSinger and Christopher Ward.

A firm that did not survive the quartz years

The quartz crisis of the 1970s and 1980s, when quartz watches largely replaced mechanical ones around the world, hit the Swiss industry hard. One account says the original James Aubert SA went bankrupt in those years, and that its remaining assets were bought by Peter Hofer. The present chief executive tells it differently: Fillon was the heir to the James Aubert name and launched Epos together with Hofer. Either way, the workshop's know-how passed into the new brand rather than disappearing.

Montres Epos against the quartz tide

Peter and Erna Hofer

In the early 1980s the success story of the traditional Swiss watch had stalled, and outside a few luxury houses almost nobody wanted to make mechanical watches. Peter Hofer, a long-established figure in Swiss watchmaking, was one of the few who still believed in them. With his wife Erna he formed Montres Epos SA in 1983, starting with a modest workshop in Biel. Epos is the Latin, from ancient Greek, for a long narrative poem about a hero's deeds, an apt name for a brand born in the worst crisis the Swiss industry had known.

The same year as the plastic watch

1983 was also the year Swatch was launched, a lifeline for the whole trade that also kept the making of mainsprings and hairsprings alive in Switzerland. The two answers to the crisis could hardly have been more different: the plastic quartz watch of 1983 on one side, and a small firm making only mechanical watches on the other. A 1985 photograph of a trade display shows an Epos mechanical pocket watch next to other brands' quartz models. The quartz threat itself had begun in Japan, with the first quartz wristwatch of 1969.

Movements from old stocks

Hofer and Fillon built the first watches on base movements from stocks of ETA, Peseux and Landeron calibres that they were able to buy. Another account adds old stocks of A. Schild movements, and says such reserves explain why calibres like the A. Schild 1726 still appear in the collections. Personal contacts with workshops in the Jura and the Vallée de Joux, and a broad knowledge of the world market, let Hofer build his brand quickly. The formula they set down still holds: mechanical watches with real added value at a level many buyers could reach.

Private labels

For years Epos also made watches that were sold under other names. The present chief executive recalls ten separate clients in Germany alone using Epos watches under ten different names. That work was phased out after 2002, so that every watch made since carries Epos on the dial.

Jean Fillon's small complications

Fillon's workshop gave Epos its own modules, built on bought-in base calibres and then decorated, often by hand. The company's own milestones give a clear sequence.

Skeletons, 1987 and 1990

In 1987 Epos reintroduced a hand-wound skeleton on the Peseux 7040 and Unitas 6497, and in 1990 an automatic skeleton on the ETA 2892-2. A skeleton watch is one in which the moving parts are visible, and true skeletonisation trims away every piece of non-essential metal from bridges, plate and wheels. Nearly every Epos has a crystal case back, and the finishes the house lists are perlage, Côtes de Genève, engraving and blued screws.

Regulators and the power reserve

A regulator module on the Peseux 7046 followed in 1988, a power-reserve indicator on the same calibre in 1989, and a regulator with moon phases in 1991. A regulator separates the hands, so that hours, minutes and seconds each have their own dial.

Calendars and big dates

A full calendar with moon phases on the Unitas 6497 came in 1997, a big date on the same calibre in 2000, and in 2002 a date pointer with small seconds at 8 o'clock on the ETA 2824. The same kind of display is the signature of the Oris pointer date. The big-date module, built on the Unitas 6498, has one quirk: after the 31st the two discs carry on to 32 and up to 39 before 00, so the date must be corrected by a pusher at the end of each month. Turned through 90 degrees, the same module became the 3383 vertical big date of 2007, with the two digits stacked at 9 o'clock.

The jumping hour

Fillon also created a jumping-hour module, in which the hour changes in a window at once rather than moving with a hand. In the 2024 catalogue the 3405 jumping hour runs on a decorated ETA 2892.

The Hundertwasser pocket watch

An artist's watch

Between 1989 and 1992 Epos developed a pocket watch with the Viennese painter and architect Friedensreich Hundertwasser and Edition Manus. Hundertwasser, born in Vienna in 1928, is known for buildings such as the Hundertwasserhaus and died at sea in February 2000. One account says the artist worked on the watch with Jean Fillon and the watchmaking school in Biel for seven years. The organic, irregular gold case carries Roman and Arabic numerals around its edge, turned towards the crown, so that the watch reads correctly as it is drawn from the pocket.

Two faces and a short run

The movement is a Unitas 6497, developed by teachers and students at the watchmaking school in Biel so that a second set of hands runs on the back of the watch. The case is blackened 18-carat gold, about 43 millimetres across, with a ruby in the crown and a dial printed in many colours. One description lists the total production as made by Epos P.M. Hofer SA in Biel. An edition of 999 was planned, but only about 200 were made, because of the artist's sudden death. One example sold in Hamburg was numbered 118 of 999 and came with its ash-wood box, which doubles as a stand. For the wider family of complicated and artistic pocket pieces, see our guide to pocket watches.

Eight days on the wrist

The 3340 Edition Antiquité

In 2003 Epos reintroduced the historic Hebdomas eight-day movement in a new case as the 3340 Edition Antiquité. The hand-wound 15-ligne movement has a screw balance and runs for eight days on one winding. The steel case is 42 millimetres wide and 14 millimetres thick, with a white enamel dial and Arabic numerals; a gold-plated case and a black dial were also made. The Hebdomas was designed for pocket watches, and for the wrist Epos simply turned it through 90 degrees.

The Goldene Unruh, 2004

In 2004 the 3340 won the Goldene Unruh, the award given each year since 1998 by the German magazines Uhren-Magazin and Focus. It won in the award's higher range, one of five bands, the year after a Mido chronograph and the year before a DuBois 1785. The house with the most wins in the award's history is Nomos Glashütte, the subject of our Nomos guide.

Duograph and pocket versions

The fluted case with its strap fixing, more familiar from jewellery watches, became the base of the 3364 Antique Duograph a year later. Two pocket watches used the same Hebdomas movement: the ref. 400, 50 millimetres in gold-plated steel with day, date and moon phase, and the ref. 10 A, 47 millimetres with a white enamel dial.

The Chonge-Forster family from 2002

A handover without heirs

In the early 2000s Peter Hofer, who had no descendants, looked for someone to take over. He wanted a successor who would keep the brand's direction and present a detailed plan for it, rather than simply the best offer. In 2002 Ursula Forster and her husband Tamdi Chonge-Forster became the owners.

Tamdi Chonge-Forster

Tamdi Chonge-Forster has worked in the Swiss watch industry since 1971, starting at Fortis and moving to Certina in 1975. He lived through the quartz crisis and its mass layoffs at first hand, and had long wanted to run his own mechanical brand. He appears to have risen to chief executive of Certina, serving until 1997, then spent five years running the strap maker Hirsch while helping to restructure Fortis, in which he held shares. Certina itself is now part of the Swatch Group.

Ursula Forster and the next generation

Ursula Forster, who became president, comes from a family of watchmakers. Her father once worked for Brüner and her brothers trained at Titoni. Their son Singi Chonge took responsibility as chairman of the board in 2014 by one account, and as chief executive in 2018 by another. A son-in-law who trained as a doctor looks after design, which may explain why so many Epos dials carry a pulsometer scale. The whole family works for the company.

Biel, Grenchen, Lengnau

From Biel to Grenchen

The first workshop was in Biel, and the company's building there appears in its own brochure. The house says its watches were made in workshops in the Jura and the Vallée de Joux and assembled in Grenchen, a watch town at the foot of the Jura in the canton of Solothurn.

The old Enicar building

In July 2011 production moved from Grenchen to neighbouring Lengnau, where Epos took the upper floor of the old building of the Enicar watch company. It shares the building with the Atlantic watch brand on the floor below. Lengnau grew from a farming village into a watchmaking town between 1889 and 1927, when about a dozen watch and parts makers opened factories there. The registered address is Solothurnstrasse 44.

How the watches are made

Base movements today are Sellita blanks or calibres, modified by three watchmakers at the Lengnau workshop. Sellita, founded in 1950 in La Chaux-de-Fonds, assembled movements for ETA until 2003 and then began making its own calibres on designs whose patents had expired. Every watch is designed in-house and assembled with a long-standing partner, while hands, dials, cases and parts for the house complications are made by outside specialists. The house makes 8,000 to 12,000 watches a year.

The Verso and the inverted Unitas

The back on the front

The 3435 Verso, shown at Baselworld in 2017, takes the hand-wound Unitas 6497 and turns it over, so that the dial side shows the bridges, balance, gear train and barrel. The Unitas 6497 is a large calibre best known from entry-level Panerai watches. The Verso is described as the first watch with a reversed Unitas 6497. The idea itself was not new: Breguet's La Tradition is the best-known earlier example, as our Breguet guide explains.

Dial, seconds and pulsometer

The time is read on a small off-centre dial at 3 o'clock with a sunray finish, held by two screws on the outer rim. The gear train bridge and balance cock are open-worked, the bridges engraved and the screws blued. The small seconds stays where it was, so it now sits on the back, behind a porthole with a pulsometer scale for 20 heartbeats. The case is 43.5 millimetres wide and 11 millimetres thick, in steel or rose PVD, water resistant to 50 metres.

Verso 2 and the limited series

A Verso 2 followed, reviewed in 2019, with the same flipped Unitas. A version with a skeleton front, dark blue hands and the pulsometer on the back was made in 999 pieces with a certificate, and reached Japanese authorised retailers with full domestic papers in 2021. The idea goes back further than 2017: the Hundertwasser watch had already shown the time on both sides of a Unitas.

Today's collections

The 2024 master catalogue groups the watches into Artistry, Sport and Timeless, plus pocket watches. Older names still used in Japan include Emotion, Passion, Originale, Oeuvre d'Art, Sophistiquée and Sportive.

Artistry

Artistry holds the house complications: the Verso, the 3383 vertical big date, the 3405 jumping hour, the 3404 big date and moon-phase models. The 3400 GMT, launched in 2010 and limited to 999 pieces, uses two ETA 2671 movements to show a second time zone with a reversed 24-hour display. At the top sits the 3373, a five-minute repeater limited to 200 pieces on an ETA 2892 base.

The convertible Oeuvre d'Art

The 3429 has an inner case that lifts out of the outer one, so it can be worn on the wrist, carried as a pocket watch or set on a desk as a small clock. In the 2024 catalogue it is a 45 millimetre skeleton on the hand-wound Unitas 6498, limited to 2015 pieces. It makes an interesting comparison with the pocket watch on the wrist of Gagà Milano.

Sport

The Sportive divers include the 3441 Diver Day-Date, with a helium valve and water resistance to 500 metres. The 3505 sports watch, new in 2024, is water resistant to 100 metres and has a skeleton version, the 3505 SK.

Timeless and the Originale skeletons

The Originale 3500 is built on a skeletonised Unitas, and each colour version was made in only 888 pieces worldwide. The Passion 3369 open heart sold well in Europe and earned a limited edition for Thailand with Thai numerals.

Tourbillon and the house's peers

The 3375 One Minute Flying Tourbillon is dated 2005 in the company's own milestones and to Baselworld 2006 elsewhere. For a tourbillon built on a very different scale, compare Daniel Roth's tourbillons. The family has said it will not move upmarket, having watched many brands try and fail. For another Swiss house that built complications for the middle of the market, compare Maurice Lacroix and its Masterpiece line.

Epos and Japan

The Osaka importer

Epos reaches Japan through a single general importer based in Osaka, with its head office in Minami-Senba, in the Shinsaibashi district. The importer's site carries its own Japanese version of the house history, from James Aubert in the Vallée de Joux to the 2002 handover. It presents the collections under their older names, Emotion, Passion, Originale, Oeuvre d'Art, Sophistiquée and Sportive, alongside ladies' watches and pocket watches. The brand grew steadily in Asia from the start, where interest in Swiss mechanical watches was strong.

Warranty cards and repairs

The importer recommends buying from domestic authorised shops, whose watches come with a warranty card issued by the importer. Within the warranty period repairs are free, and after it the importer still offers servicing at member rates. Watches bought elsewhere may need to be repaired abroad, with longer waits and shipping both ways. For a buyer in Japan, that makes the importer's card worth more than a box, a point explored in our guide to what makes a full set.

A vintage line for Japan

The importer also carries a vintage collection that has no exact match in the 2024 master catalogue. It includes the 3512 Octagon in several versions, in steel and gold plate, and the 3362 Doctor Watch, limited to 150 pieces. In our census an unused 3512 in steel appears as a 100-piece limited edition with domestic papers.

The Doctor Watch

The Doctor Watch is a small Art Deco tonneau, 40 by 33 millimetres, in steel with a display back and sapphire crystal. It runs on the hand-wound Peseux 7046 with 17 jewels, 18,000 beats an hour and Incabloc shock protection, decorated with Côtes de Genève and blued screws. The small seconds is as large as the hour dial and printed in red, so that a doctor can read a patient's pulse, and watches with this layout were known as doctors' watches in the early twentieth century. Our census shows three examples, one numbered 66 of 150 and one the last of the run, 150 of 150.

A shared name

In Japan the same four letters also name a well-known credit card, so Japanese reference pages on the watch house open with a note sending card holders elsewhere. When searching shop pages in Japan, adding the word for wristwatch saves time.

Timeline

What turns up in Japan

We read all 72 pieces offered on the main Japanese shelf for Epos on 25 October 2026, for this guide only. The counts below are by family, as named in the descriptions.

Automatic watches outnumber hand-wound ones by 43 to 19, and 26 pieces mention a skeleton, an open heart or a display back. Ten are named as limited editions, 14 as unused, and 13 mention a warranty card. Only two say they are domestic authorised stock, so for most pieces the importer's servicing terms cannot be assumed. Descriptions use the condition grades set out in our guide to Japanese condition ranks.

Reading a reference

Four-digit families

Most wristwatches carry four-digit references in the 3000s, such as 3340, 3383 or 3435. The 4000s cover the ladies' 4390 and 4314 as well as the 4413 diver, and pocket watches start with 2, as in the 2003 and 2166. The 2024 catalogue gives each variant a longer dotted number, such as 3435.313.24.18.25, while the Japanese importer uses short letter suffixes.

Letter suffixes

On the importer's pages the same reference appears with and without a final M, as in 3500SKBL and 3500SKBLM. Letters such as SK, OH and SL appear on skeleton, open-heart and silver-dial versions respectively. Treat these as reading aids rather than a published code, and confirm with the dial and papers.

Calibre clues

A large, flat hand-wound movement with a small seconds is usually a Unitas 6497 or 6498, the base of the Verso, the 3500 and many pocket watches. A small tonneau hand-wound watch may hold a Peseux, as in the Doctor Watch. Automatics usually run on ETA 2824 or 2892 bases, or their Sellita equivalents in newer watches.

Where the accounts disagree

The story of Epos is told in several versions, and they do not always agree. We set the conflicts out rather than choosing quietly.

How we resolved them

Where a house catalogue gives a number, as with the five-minute repeater, we follow the catalogue. Where dates differ by a year, we print both, since a show debut and a delivery date can fall in different years. On the Aubert handover we report both versions, because a bankrupt firm can still pass its people and know-how to a new company.

The sceptic's case

Bought-in movements

Epos does not make its own base movements, and has always built on calibres from ETA, Unitas, Peseux and, more recently, Sellita. A sceptic will say that a 6497 is a 6497 whoever turns it around. The fair answer is that the modules, the finishing and the reversed layouts are real work, and that buyers pay for that work, not for an in-house claim.

A small house

With three watchmakers in Lengnau and an output of 8,000 to 12,000 watches a year, Epos is a small house. Its dealer network is thin outside a few markets. Service outside Japan's importer network, or outside Switzerland, may take longer.

Limited does not mean rare

Many Epos pieces carry limited-edition numbers of 888 or 999, which are generous runs for a house of this size. A limit is a fact about production, not a promise about future demand.

Checks before you buy

Match the reference to the movement

Use the reference to look up the calibre, and compare it with what you see through the back. A 3435 should show a Unitas 6497 base, a 3362 a Peseux 7046 and a 3340 the eight-day calibre.

Papers and the warranty card

For Japanese stock, the importer's warranty card is the key paper, since it opens the door to domestic servicing. Limited editions should also show a number on the case back or dial that matches the papers.

Skeleton condition

On skeleton and open-heart dials, look for dust, scratched bridges and dull blued screws, since these are hard to fix without a full service. Our wider notes are in our guide to collectible watches. How a watch was stored matters as much as how it was worn, as our note on Japanese storage habits explains.

Power reserve on the 8 Jours

An eight-day watch that stops after two days needs a service, not just a wind. Ask for a full wind and a timed run before buying.

Frequently asked questions

Does Epos make its own movements?

No: it builds on Swiss base calibres from ETA, Unitas, Peseux and Sellita, and adds its own modules and finishing.

Who owns Epos today?

The Chonge-Forster family, who took over from the founder in 2002.

What is the Verso?

A hand-wound watch whose Unitas 6497 is turned over so that the gears face the dial side, launched in 2017.

Is the Hundertwasser watch an Epos?

Yes: it was made by the Epos company of Peter Hofer, with the artist, in a small run.

Can a Japanese Epos be serviced abroad?

Yes, but the importer's warranty covers only watches bought through its authorised network in Japan.

Closing thoughts

Epos is what happens when an engineer's family history, a refusal to give up on mechanical watches and a taste for showing the movement come together in one small Swiss house. For readers who want one brought home from Japan, our otoriyose guide explains how. The collector's atlas of Tokyo maps where to see watches in person. Our current watches are on the collectible watches shelf, and requests start at our otoriyose desk.

Further reading

References

Volver al blog

Deja un comentario

Ten en cuenta que los comentarios deben aprobarse antes de publicarse.