Tutima Watches: 1941 Flieger, 798, Patria and Tempostopp

The short answer

Tutima is a German watch brand whose name comes from the Latin tutus, "safe" or "protected". It began as the top quality grade of the watch factories that Dr Ernst Kurtz set up in Glashütte in the late 1920s, where the town's makers were moving from pocket watches to wristwatches. Its first famous watch was a pilot's chronograph of 1941, with a column-wheel movement and a flyback, or "Tempostopp", function, made in large numbers for the German air force. Our watch almanac of houses, family trees and references places Tutima among the other watch houses.

At the end of the Second World War the Glashütte works were bombed and stripped, and Kurtz moved west. After some lean years the business passed to Dieter Delecate, whose family still owns it. Under him the firm won the 1980s contract for the West German air force chronograph, the ref. 798 on the Lemania 5100, reissued its 1941 pilot's chronograph in 1994, and finally moved production back to Glashütte, where it has made a minute repeater, a dress watch calibre and a new flyback chronograph of its own.

For collectors the most interesting pieces are wartime chronographs with their original parts, issued and civilian 798s, early re-editions, and the small runs with in-house movements: the Hommage, the Patria and the Tempostopp. The steel M2, Grand Flieger and Saxon One families are the everyday Tutimas, and many of them reach Japan with boxes and papers.

Out of a bankrupt cooperative

Glashütte, a small town in the Müglitz valley south of Dresden, had made fine pocket watches since Ferdinand Adolph Lange set up his workshop there in 1845. Our guide to A. Lange & Söhne tells that part of the story. After the First World War the town's makers struggled. A cooperative, the Deutsche Präzisions-Uhrenfabrik Glashütte, or DPUG, had been formed in 1918 to make precision pocket watches that could compete with Swiss factory production, but it was ruined by the hyperinflation of the early 1920s, when the cost of a single pocket watch rose into the trillions of marks, and it collapsed in 1925.

Machines from Bienne

The cooperative's main creditor, the Saxon state clearing bank, wanted to save what it could. Its answer, in 1926, was to found two new companies: the Uhren-Rohwerke-Fabrik Glashütte AG, or UROFA, to make movement blanks, and the Uhrenfabrik Glashütte AG, or UFAG, to finish, case and sell watches. Germany had no experience of making wristwatch movements in series, so the new firm looked to Switzerland. It bought the machinery of a bankrupt movement factory in Bienne, whose owner, Emile Judith, came to Glashütte as a technician. A local history describes the first plant in detail, from jig borers and milling machines to jewel-setting tools.

A young jurist in charge

The man the bank chose to run both firms was Dr Ernst Kurtz, a lawyer from Hamburg who was only in his mid-twenties; one account gives his age at appointment as 26. He took charge of UROFA and UFAG in 1927, and brand histories treat that year as Tutima's founding. Kurtz's decisive idea was to make wristwatches rather than pocket watches, using Swiss-style automated methods. "He was a visionary," a Tutima director said in 2024, crediting him with switching production to wristwatches on an industrial scale.

Calibre 52 and a Latin name

Series production of wristwatch movements with a Swiss lever escapement began at UROFA in the autumn of 1929 with Calibre 52, an 8¾-ligne movement. A small share of these were finished to traditional Glashütte standards at UFAG and, from 1930, sold under UFAG's new quality mark, Tutima. A German trade journal of 1930 described the watch as the first wristwatch made entirely in Germany, and the earliest known Tutima advertisement dates from 1931, before the stylised "t" logo appeared. Only about 8 to 10 per cent of UROFA's movement output was turned into finished UFAG watches, in two grades; the finer grade carried the Tutima name, and a few movements of that quality went to A. Lange & Söhne.

The two firms also sold movement blanks to other companies, and in the 1930s they added machinery that made them less dependent on Swiss parts, along with an apprentice school and hostel. The published accounts were less happy: one local history notes that the balance sheets for 1927 to 1936 each showed a loss.

Calibre 59 and the 1941 flyback

At the end of 1938 UROFA and UFAG were classified as armaments producers, and by the end of 1940 civilian wristwatch production had stopped. The factories' main task became a chronograph for military pilots. Planning began in 1939, and the watch was in production from 1941 until 1945. It is the watch most collectors mean when they speak of a "Tutima Glashütte" chronograph, and it is the ancestor of today's Grand Flieger.

Specifications set by the ministry

The air ministry laid down detailed requirements. The watch had to resist shocks and the acceleration of a diving aircraft, and its rate had to stay within minus 3 to plus 12 seconds a day between minus 10 and plus 40 degrees Celsius. Accounts of the pressure test differ: one English history gives 1.5 atmospheres for an hour and a half, while a German study of the calibre gives 15 atmospheres over the same period. The case was large, with a fluted rotating bezel carrying a red reference marker, a big crown and luminous hands and numerals.

Inside the movement

UROFA designed a new hand-wound movement for the watch, Calibre 59. It measured 34 mm across and 5.4 mm high, had 17 jewels, a column wheel, a 30-minute counter, a screw balance with a Breguet balance spring and, on many examples, shock protection. Its distinguishing feature was the flyback: pressing the lower pusher while the chronograph ran reset the hands to zero and restarted them at once, which was useful for timing successive legs of a flight. The function was then called "Tempostopp", or addition timing, in German. Brand and specialist histories describe it as the first German chronograph with a flyback. Some wheels, pinions and other parts were imported from Switzerland, and the calibre was used for this watch alone. Our watch almanac explains how such firsts are usually defined.

Three finishes, two casebacks

A German register of surviving examples shows that the movement was made in three finishes: frosted and gold-plated, frosted and silver-plated, and nickel-plated, roughly in that order across the serial numbers. Screw-down casebacks were first nickel-plated brass and later stainless steel, and a chrome-plated case appeared near the end of the war. The same researcher suggests that around 1,200 sets of parts a month could be made at the peak. Watches were serviced every year in wartime, which explains why many surviving examples have replaced luminous material or parts.

How many were made

The usual figure is about 30,000 between 1941 and 1945, quoted in a standard German reference book and repeated by the brand. Not every researcher treats it as settled: a German register of surviving examples, which records serial numbers up to just above 215,000, is still being compiled, and the true total may never be known. Research into the period also documents the use of forced labour at UROFA and UFAG between 1940 and 1945, a part of the story that collectors should not overlook.

Kurtz's brother Walter was a test pilot, and brand histories say the watch was tried in the air before it went into service. Pilot's chronographs of the same era from other countries are covered in our pieces on the Breitling Navitimer and Zenith.

Destruction, reparations, exile

On 8 May 1945, the last day of the war in Europe, Glashütte was bombed. What survived of UROFA and UFAG was dismantled from July and shipped to the Soviet Union; by early August the factory rooms were empty. Reparations lists suggest that about 600 complete Calibre 59 movements, and thousands of parts, went to the First Moscow Watch Factory, together with around 200 chrome-plated cases. The drawings for Calibre 59 were lost. What remained in Glashütte was later folded into the East German state watch combine.

Memmelsdorf in Franconia

Kurtz had left Glashütte a few days before the end of the war, taking some skilled workers and a few machines with him. He settled in Memmelsdorf in Upper Franconia, in the American zone, at a former UROFA branch that had made fuzes, and his first job there was to assemble remaining Calibre 59 stock for the US Army. Postwar chronographs in chromed cases from his new Dr Ernst Kurtz Uhrenfabrik are known.

Ganderkesee near Bremen

Around 1950 or 1951 Kurtz moved again, to Ganderkesee in Lower Saxony, where the firm's administration is based today. Watches were signed "Kurtz Glashütter Tradition", and his Calibre 25 was well regarded. Within a few years, however, less costly Swiss watches had undercut the business. An employee, Werner Pohlan, took it over and renamed it Nurofa, the "N" standing for "north", and revived the Tutima name.

Pohlan, Nurofa and the Delecate era

Around 1960 Dieter Delecate, a northern German businessman who had distributed Tutima watches and was close to Kurtz, took over production and reorganised the company as Tutima Uhren GmbH. His family has run it ever since. Kurtz lived to see the revival of his chronograph; he died in Ganderkesee in 1996, aged 97. Delecate later said of him that "he was an idealist" who "always spoke of Glashütte and made great plans".

The quartz decades

The 1960s and 1970s were hard for every European maker. Quartz watches from Japan, following the Seiko Astron of 1969, changed the market, and many old names disappeared. Delecate kept the firm alive by adjusting its models and structure, and Tutima made quartz watches as well as mechanical ones. One register entry gives 7 April 1970 as the date from which the Tutima name has been protected as a trademark.

Titanium and a second label

Tutima was an early user of titanium alloy for watch cases, prized for its low weight and resistance to corrosion. From 1991 the company also made quartz watches in titanium cases under a separate name, Boccia Titanium, for a lower segment of the market. That side of the business explains why some Tutima-related pieces from this period are light, simple and battery-powered.

An aerobatic ambassador

Tutima's identity in these years was built around aviation. Its longest-standing ambassador is the American aerobatic pilot Sean D. Tucker, whose display aircraft carried the brand's name, and the firm supplied watches to NATO's airborne early warning crews as well as to private flying teams. Our Bell & Ross guide shows how another firm built a brand on cockpit instruments.

Military Chronograph ref. 798

In the early 1980s the West German air force needed new chronographs for its pilots. It drew up criteria in 1982 and invited German makers to tender; a year later contracts went to several firms, Tutima among them. The result was the Military Chronograph ref. 798, introduced in 1984. Accounts differ on the exact year of the order, some giving 1985, but all agree that the watch became standard issue for German military pilots and was adopted by NATO, which is why it is often called the "NATO chronograph". It was assigned NATO stock number 6645-12-194-8642. Tutima says it still supplies the German armed forces.

Lemania 5100 inside

Tutima no longer made chronograph movements, so the 798 used the Lemania 5100, an automatic chronograph with a vertical clutch, a 4 Hz balance and a central minute counter, so that elapsed seconds and minutes are both read from centre hands. The specification also called for a 24-hour hand, day and date, a hacking seconds and a rate within minus 2 to plus 8 seconds a day, and the watch had to cope with accelerations of 7 g. The same movement powered rival pilots' chronographs from Sinn and others; see our Sinn guide for the Frankfurt firm's versions. The Lemania 5100 is no longer made, which matters for servicing.

Case, pushers and dial

The case is 43 mm across and nearly 14.6 mm thick, with short lugs, rounded edges so that nothing snags on a harness, and a bead-blasted finish. Its signature is a pair of large pushers integrated into the case flank, intended to be easier to use in gloves and harder to break off. The dial has no tachymeter, since the scale would have been useless at jet speeds; the day appears in German. Water resistance was 100 m at first and was later raised to 200 m, and the sapphire crystal is secured against sudden loss of pressure.

Markings on issued pieces

Watches made for the armed forces carry the issuing authority and stock number on the caseback. Examples signed "Tutima W-Germany" were made before reunification in 1990; later pieces read "Tutima Germany". The current successor carries the reference 6450. A Japanese description of the 798 notes that its egg-shaped case was designed so that a fully equipped pilot could move freely in a cramped cockpit.

A 1994 re-edition

Encouraged by the success of the 798 and the return of interest in mechanical watches, Tutima did something few brands had then attempted: it reissued its 1941 pilot's chronograph. The re-edition appeared in 1994, in time for Kurtz's 95th birthday, and was later known as the Grand Classic Flieger chronograph. It kept the fluted bezel, the red marker and the large crown, which makes it an early example of the vintage reissue.

Valjoux 7760 in place of the original

With no Calibre 59 available, the re-edition used the hand-wound Valjoux 7760. The one thing it could not do was the flyback. The other visible change was a sapphire crystal in place of the original acrylic.

Homecoming to Glashütte

After reunification Delecate wanted to return to Glashütte, but he moved slowly. In 2005 the family bought the town's former railway maintenance depot, close to the historical factory, and rebuilt it over three years. A Glashütte workshop opened in 2008 while Ganderkesee kept running, and the same year brought the Grand Classic Alpha. The new factory was formally inaugurated on 12 May 2011, described at the time as a return after an absence of 65 years. Tutima's neighbours there include Nomos Glashütte, in the old station, as well as Lange and Glashütte Original.

A restorer joins

In 2008 Delecate hired Rolf Lang, a master watchmaker who had been chief restorer at Dresden's Mathematisch-Physikalischer Salon, had led restoration and special projects at A. Lange & Söhne and had run production at Moser. His experience of repeaters in restoration led him to propose a chiming watch. Delecate's children, Jörg and Ute, took over daily management, Jörg as managing director and Ute in charge of marketing and public relations.

Hommage minute repeater

The Hommage Minute Repeater was presented on 12 May 2011, the day the factory opened. The brand describes it as the first minute repeater conceived, developed and made in Glashütte, and others as the first made entirely in Germany. Before it, Glashütte's repeaters had either been simpler quarter repeaters, of which Lange made about 700 up to 1940, or been built on blanks supplied from Switzerland.

Calibre 800

The hand-wound Calibre 800 has about 550 parts, 42 jewels, a diameter of 32 mm and a height of 7.2 mm. It runs at 3 Hz, or 21,600 vibrations an hour, with a 65-hour reserve, and has a screw balance with gold weights and a free-sprung Breguet balance spring. Every part except the balance spring is made by Tutima. The frosted, gold-plated three-quarter plate, jewels in chatons and a hand-engraved balance cock are classic Glashütte features.

Twenty-five pieces

The 43 mm case comes in rose gold or platinum, with a classic or skeletonised dial, and the edition is limited to 25 watches: 20 in rose gold and five in platinum. The brand says the Hommage won a Couture Time Award in the United States in 2013.

Patria and Calibre 617

In 2013 Tutima launched four new families, its first collection made in Glashütte for 68 years. The most refined was the Patria, a dress watch with an in-house hand-wound movement derived from the work on the repeater. It came in two forms, Small Seconds and Dual Time, with an opaline silver dial, Arabic numerals or applied markers and gold hands.

A three-quarter plate

Calibre 617 measures 31.6 mm by 4.78 mm and has 20 jewels, a 65-hour reserve and a rate of 21,600 vibrations an hour. Its striped, gold-plated three-quarter plate, gold chatons, sunburst ratchet and crown wheels and a variable-inertia balance with gold screws follow Saxon practice. The Dual Time version uses Calibre 619. The pink gold case is 43 mm across and 11.2 mm thick, water-resistant to 50 m.

Tempostopp, ninety years on

For its 90th anniversary in 2017 Tutima showed the Tempostopp, a flyback chronograph that completed Delecate's second ambition: to stop relying on outside chronograph movements. The watch is limited to 90 pieces in a 43 mm pink gold case, with mushroom pushers, a fluted crown and a dial modelled on the 1941 chronograph.

Rebuilt without drawings

Because the plans for Calibre 59 had been lost, the new Calibre T659 had to be re-engineered from surviving watches, a task that took about three years. It is a hand-wound column-wheel chronograph with a horizontal clutch and flyback, measuring 33.7 mm by 6.6 mm. Accounts give 236 or 237 components; it has a Breguet balance spring, gold regulating screws, 21,600 vibrations an hour and a 65-hour reserve, and the bridges are sand-blasted and gold-plated with polished bevels.

Everyday families

Most Tutimas are not made in tens of pieces. Recent estimates of annual output vary widely, from about 1,000 watches in one 2019 directory to about 10,000 in a 2024 interview, and the firm says that around 80 per cent of its watches use ETA or Sellita movements refined to meet the Glashütte standard, with the rest powered by in-house calibres. Our Tissot guide explains the Swiss movement firms behind many such watches.

M2 and the DI 300

The M2 line, with its titanium cases, continues the military tradition. The M2 chronographs use the Tutima 521, a modified Valjoux 7750, and the 46 mm M2 Pioneer adds a 24-hour hand. In 2016 the M2 Seven Seas revived the spirit of the DI 300, an earlier titanium diver with a tonneau case: it uses the Tutima 330, based on the ETA 2836-2, measures 44.4 mm and is rated to 500 m, against 200 m for the older diver.

Saxon One

The Saxon One chronograph has a steel case of 43 mm by 15.7 mm, a rotating bezel and a 24-hour indication, and also uses the Valjoux 7750-based calibre with a 48-hour reserve. One specification sheet gives the calibre number as 512 rather than 521, apparently a slip.

Grand Flieger and Sky

The Grand Flieger is the direct descendant of the 1941 chronograph and the re-edition, with the fluted bezel and red marker; its automatic three-hand Classic version uses Calibre 330 in a 43 mm case. The Sky family offers simpler pilot's watches.

Key references

Calibres compared

Tutima and Japan

Tutima is a specialist's name in Japan, where it is usually written in katakana as "Chuchima". It has had a Japanese importer for many years, and that importer runs a Japanese-language brand site with a news page, a history and an archive of past models. Japanese watch magazines have covered the brand in their surveys of German watchmaking, and it appears at Tokyo exhibitions of independent and family-owned houses, most recently at a two-day show on 21 and 22 May 2026.

An archive of past models

The Japanese site's page of historical models begins with a 1930s watch on UROFA Calibre 58, which it says is now displayed in the Glashütte watch museum, and continues with the 1941 pilot's chronograph and the 798. Its account of the 798 sets out the NATO requirements in detail: automatic winding, a 24-hour indication, 12-hour and 60-minute counters with central minutes, day and date, hacking seconds, a rate of minus 2 to plus 8 seconds a day, 10 bar water resistance and shock protection. It names the 6450-03 as the current successor.

What Japanese coverage adds

A 2019 Japanese survey of German makers gave Tutima's annual output at about 1,000 watches, its main families as the Saxon One, M2, Grand Flieger and Patria, and its headquarters on Altenberger Strasse in Glashütte. It dated the first Tutima-signed wristwatches to 1930 and said the brand was revived in the 1960s by former employees in Ganderkesee, a slightly different chronology from the German accounts. Its summary of the brand's motto, innovation at the highest level of watchmaking, matches the brand's own line.

Why examples here come with papers

Watches sold new through the importer usually came with a Japanese guarantee card, and Japanese owners tend to keep the box, booklets and receipts; see how Japan cares for watches and why the full set matters. Military 798s are rarer here than civilian Flieger and M2 models, and wartime chronographs are seldom seen. Our explanation of Japanese condition ranks helps decode descriptions, and our essay on the Japanese pre-owned market explains why so many well-kept watches surface in Tokyo. The local rivalry that shaped Japan's own chronographs is covered in our Seiko 6139 guide.

On film

The short film below looks at the Tempostopp of 2017, showing the pink gold case, the fluted crown and the T659 movement through the caseback.

Where the records disagree

Tutima's history has been retold by the brand, by German researchers and by watch journalists, and the details do not always match. Where we cannot settle a point, the text above gives both versions.

A sceptic's view

There is a case against paying a premium for the name. Most Tutimas use Swiss movements, the Valjoux 7750 and ETA 2836-2 families among them, and the M2 and Grand Flieger look much like other German pilot's watches. The integrated pushers of the 798 have their critics: one specialist writer found them no easier to use in gloves than ordinary pushers. Wartime chronographs raise harder questions, from replaced parts to the circumstances of their manufacture. And the Lemania 5100 is no longer made, so a 798 needs a watchmaker who knows the calibre.

Against that, Tutima has a real place in German watch history, its 798 was one of the last mechanical watches designed for military pilots, and its in-house calibres are made in small numbers to a high standard. As with Junghans, the best approach is to know the references and buy on condition.

Advice for collectors

Decide first which Tutima you want: a wartime chronograph, a 798, an early re-edition, a modern Grand Flieger or M2, or one of the Glashütte calibres. Each asks different questions.

Wartime pieces

Ask for clear photographs of the movement and caseback. The movement number, finish and caseback material should be consistent with the serial ranges researchers have recorded, and the bezel, crown and hands should match the period. Many survivors were serviced repeatedly, so some replacement is normal, but a watch assembled from mixed parts is worth much less.

Checking a 798

Check the caseback markings, the integrated pushers and the central minute hand, which should reset cleanly with the seconds hand. Tritium dials age to an even cream; patchy lume or crisp white plots may mean a replacement. Our grading and condition guide explains how we describe wear.

Modern references

For a Patria, Hommage or Tempostopp, the edition number, guarantee and Glashütte signature should agree, and a full set matters more than usual; see documentation as value in Japan. Every watch we offer is covered by our authenticity guarantee.

Shipping from Tokyo

Watches shipped from Japan may attract duties and taxes on arrival. Our guide to import duties on luxury goods from Japan sets out what to expect, and our walk through Ginza and its watch history shows where Tokyo's watch culture began. For Japan's own precision watches, see Grand Seiko and Credor.

Questions readers ask

Further reading

References

The Japonista Curation and Concierge Team, Tokyo, Japan

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.