Tonino Lamborghini Watches: Spyder, Cuscinetto and the Japan Story
A tractor family's heir, a ball-bearing bezel and a shield on the wrist since 1981
In 1983 a thirty-five-year-old designer from Emilia gave his father a present: a round piece for the wrist whose bezel turned on a ring of steel balls, like the bearings in the engines that had made the family rich. The father had built tractors from war-surplus engines and then supercars that carried a charging bull. The son had built a brand of accessories instead, and its first object was a timekeeper. This guide follows that line from the workshop to the present: the house, the shield-shaped models that most people picture, the Swiss automatic revival of 2019, what sits inside the cases, and a quieter thread that runs through Tokyo.
At a glance
| Item | Detail |
|---|---|
| Founder | Tonino Lamborghini, born 13 October 1947, son of Ferruccio |
| Founded | 1981, as Tonino Lamborghini Style and Accessories |
| Home | Funo di Argelato, near Bologna |
| Company form | Tonino Lamborghini S.p.A. since 2011 |
| Chief executive | Ferruccio Lamborghini, grandson of the car maker |
| Best-known families | Spyder, Cuscinetto, Spyderleggero, Panfilo, GT1 |
| Movements | Swiss quartz chronographs; Swiss automatics since 2019 |
| Not to be confused with | Automobili Lamborghini, the car maker in Sant'Agata Bolognese |
Tonino Lamborghini watches: the short answer
Tonino Lamborghini watches are the timepieces of a lifestyle house founded in 1981 by the only son of Ferruccio Lamborghini, the industrialist behind the tractors and the supercars. They are not made by the car company, which Ferruccio sold in the 1970s and which now belongs to the Volkswagen group through Audi. The house is a separate family business with its head office at Funo di Argelato, in the plain north of Bologna, and it uses its own version of the charging-bull shield.
Two shapes define the watches. The first is the Cuscinetto, Italian for ball bearing, created in 1983 with a bezel that turns freely on steel balls. The second is the Spyder, a shield-shaped case developed in 2007 or 2008 by the company's design centre as a tribute to the emblem. Most Spyders run on Swiss quartz chronograph movements from Ronda. In 2019 Ferruccio Lamborghini, the founder's eldest son and the third generation of the family, relaunched the range as Tonino Lamborghini Swiss Watches: eight lines drawn with the designer Fulvio Locci, many in titanium, several with Sellita automatic movements. These belong in the wider family tree set out in our watch almanac of houses and references.
In Japan the name has been carried for years by small importers rather than by a national subsidiary. An importer in the Higashi-Ueno district of Tokyo handled the watches for a long period, and in February 2021 an official boutique opened inside a five-star hotel in Akasaka. The Japanese shelf today is thin, and it consists mostly of quartz chronographs from the early 2000s and the shield models. The Swiss automatics of 2019 onwards are rarely seen there.
"I've always loved products linked to mechanics, thus it was obvious for me that the first accessory I designed was a watch."Tonino Lamborghini, 2021
A family of engines, tractors and bulls
Ferruccio Lamborghini was born on 28 April 1916 to grape farmers at Renazzo, a village within the municipality of Cento in the province of Ferrara, and died on 20 February 1993. At eighteen, in 1934, he opened a workshop at Renazzo with a friend. His wartime service on the island of Rhodes, repairing and recovering military vehicles, gave him the practical training that the rest of his career drew on.
Carioca and the L 33
Back in Cento in 1946, he turned from repairs to manufacture, and in 1947 he and three partners set up a company to build farm machinery. The first Carioca tractors of 1948 used truck and military engines and differentials left over from the war, chiefly six-cylinder Morris petrol units. A fuel atomiser of his own design let them start on petrol and then switch to less costly diesel. Lamborghini Trattori dates its founding to that year, and by 1951 the L 33 was the first production tractor built almost entirely by the firm, with a 3,500 cc six-cylinder Morris engine as the one bought-in part.
The emblem and the Taurus sign
The bull arrived with the cars. In 1962 Ferruccio visited the Seville ranch of Don Eduardo Miura, a breeder of fighting bulls, and decided that a charging bull would be the emblem of the car company he was about to found. He was himself born under Taurus. The logo was drawn by Paolo Rambaldi: a bull in a fighting stance, set inside a red shield edged in black, and it was later applied to the tractors too. Car names followed the bullring, and the Miura, built from 1966 to 1973, took the breeder's own name. The Countach followed it.
Selling up in the 1970s
The 1970s turned against the group. In 1972, after a large export order collapsed, Ferruccio sold his entire holding in the tractor company to its rival SAME. He sold 51 per cent of the car company to the Swiss businessman Georges-Henri Rossetti for 600,000 US dollars, and by 1974 he had sold the remaining 49 per cent to René Leimer and severed his ties with the cars that bore his name. He retired to La Fiorita, an estate on the shore of Lake Trasimeno, where he made wine. Automobili Lamborghini went on through several owners. Ferruccio's son was the one who carried the surname into a new trade.
That son, Tonino, was born on 13 October 1947 to Ferruccio's first wife, Clelia Monti, who died giving birth. Ferruccio's first wife was a native of Ferrara whom he had met on Rhodes during the war. Tonino grew up around the workshops and the factories, and when he struck out on his own in 1981 he chose a trade his father had never touched: objects for the person rather than machines for the field or the road. The difference between the two men's companies matters to anyone reading a dial today: a watch with Tonino's name has nothing to do with the car factory at Sant'Agata Bolognese, and the shield on it is the son's version of the father's emblem.
Style and Accessories, 1981
Tonino founded Tonino Lamborghini Style and Accessories in 1981, at the age of thirty-three. The idea was to carry the family's mechanical vocabulary into objects for daily life, and the house has described that intention in his own words: a series of accessories with stylistic features drawn from the bearing, the connecting rod, the cap nut and the suspension. The company now works from Funo di Argelato, a few kilometres north of Bologna, where it occupies the Palazzo del Vignola, a historic villa that also serves as its showroom.
Connecting rods and cap nuts
The first accessory was a timepiece, and the first famous one was the Cuscinetto of 1983. Its bezel was designed as a real ball bearing: a ring that turns freely in both directions on small moving balls, the machine element that reduces friction between two parts in motion. Tonino gave the first example to his father. The same year he received an honorary degree in business management from Pro Deo University in New York, and in 1995 he was made a Commendatore of the Italian Republic. The case vocabulary he set out in those years, with exposed screws, mechanical bezels and racing colours, has stayed with the house ever since. It came in the same year that a Swiss group launched a plastic quartz watch for the mass market, as told in our account of Swatch, 1983 and the Ginza story, but the two ideas could hardly have been further apart.
"I decided to develop a series of accessories that introduced for the first time stylistic features inspired by the bearing, the connecting rod, the cap nut, the suspensions: clear references to the world I came from."Tonino Lamborghini
Licensing with control
For roughly the first fifteen years Tonino designed and produced his lines himself, to prove the idea. He then moved to a licensing model, but one in which the house supplied the design and decided the distribution: partners were authorised to make what the house wanted and sell it as the house wanted. By 2009 the group reported revenue of 180 million euros, eighty per cent of it from abroad, across more than thirty-eight product types and about fifteen thousand points of sale. It ran twelve single-brand shops in Hong Kong and Macau and seventy-four corners on cruise ships. The reach extended to golf carts and utility vehicles in the 1990s, cafés and more than a hundred corners and flagships across Asia in the 2000s, and energy drinks in the second half of that decade.
A joint-stock company in 2011
For the thirtieth anniversary, in 2011, the business became Tonino Lamborghini S.p.A., a joint-stock company, and turned towards hotels and residences, beginning with five-star projects in China. Between 2020 and 2023 the house added residences in Brazil, towers in Chengdu and its first single-brand shop in Las Vegas. The fortieth anniversary in 2021 was marked with a book, Tonino Lamborghini Over the Years. 1981–2021, overseen by Ferruccio Lamborghini, dedicated to his father, presented at the Palazzo del Vignola and printed in 500 copies. For watch collectors the essential point is the 2019 change of course: after years of licences, the family took direct control of the design, technical choices and positioning of its timepieces.
The Spyder family
The model most people picture is the Spyder. It was developed by the house's design centre, the Centro Stile, as a tribute to the shield that encloses the charging bull in the logo. Its name comes from the open two-seat roadster. The case is the shield itself, broad at the top and tapering towards six o'clock. On the wrist it reads as an emblem first and a dial second, a quality it shares with the statement cases in our Jacob & Co. collector's guide, although at a very different level of watchmaking.
Anatomy of the original case
The 2019 Spyder is a brushed steel case of 44.3 mm, 13.7 mm thick and water-resistant to 10 ATM, with a sapphire crystal and a crown sandblasted in black with the logo in relief. Its dial splits in two: carbon fibre on the upper half and côtes de Genève stripes on the lower, with coloured luminous hands and indices. Inside is the Ronda RL 5050 B, a Swiss quartz chronograph. The watch weighs 150 g, and the folding clasp in black PVD carries the name and a three-dimensional bull, a detail the house uses across its sports models. Over the years the Spyder has changed colour and shape many times, so a single family name covers a wide range of references.
The heavier X
The Spyder X is the aggressive sibling. Its steel case measures 53 by 56 mm and 16 mm thick, with a multi-layer sandblasted bezel, a honeycomb-pattern dial and dedicated Start and Reset pushers. The Miura bull shield is engraved on the crown. It uses the same Ronda RL 5050 B movement and weighs 170 g. These are large objects. The Spyder X belongs with the oversized cases in our Zeno Watch Basel guide, and anyone with a slim wrist should measure before committing.
A slimmer outline for 2022
The New Spyder appeared in 2022 after the success of the original line. It keeps the shield but in a more compact, cleaner form: 44 by 50 mm, 14.5 mm thick, with a carbon-fibre dial and debossed counters, a sapphire crystal with anti-reflective coating, a steel back and water resistance of 5 ATM. The movement is the Ronda RL 5020 B Swiss quartz chronograph with date and ten jewels, and the watch weighs 90 g on a suede strap with a rubber insert. Among the shield models, it is the one most people can wear every day.
"Tonino Lamborghini lifestyle combines Italian flair with the heritage design of our Italian family."Ferruccio Lamborghini, 2021
The 2019 Swiss collection
The third generation took over the watches in 2019. Ferruccio Lamborghini, born in 1991, is Tonino's eldest son, vice-president and chief executive. He is a former Italian motorcycle champion in the Moto2 class, and the racing language runs through the collection he drew. Working with the designer Fulvio Locci, active in watchmaking since 1985, and with a long-established Swiss maker, he presented eight lines in October 2019 under the name Tonino Lamborghini Swiss Watches: Cuscinetto, Cuscinetto R, Panfilo, Spyderleggero Skeleton, Spyderleggero Chrono, Spyder, Spyder X and GT1. The titanium cover folding clasps of the automatic models carry the house's name and were made by Armand Nicolet, the maker from Tramelan in the Bernese Jura, founded in 1875. The new automatics in the medium-to-high range sat alongside the quartz chronographs, which stayed the more accessible core of the range. At the launch the family named its key markets as the Middle East, Russia, China and the United States, and in Europe Germany, Italy and the United Kingdom.
The Cuscinetto in titanium
The new Cuscinetto keeps the free two-way bearing bezel of 1983 but moves to a satin-finished titanium case of 42 mm, 12 mm thick, water-resistant to 10 ATM, with a two-gasket crown, a sapphire crystal treated against reflection and a titanium back. The black dial carries applied luminous indices. Torx screws, a nod to engines and motorcycles, hold the case together. Inside is the Sellita SW 200-1 Swiss automatic with date, 26 jewels and a power reserve of about 38 hours. It weighs 90 g on rubber. Ferruccio repeated his father's gesture and gave the first example to Tonino. The Cuscinetto R, R for racing, adds black DLC, a skeletonised dial in smoked sapphire, a display back and a double titanium bridge on the sides of the case with the crown at twelve o'clock.
A diver named after a yacht
The Panfilo, named after the old word for a large pleasure boat, was the house's first diver. Its titanium sandwich case of 44 mm and 15 mm thickness is water-resistant to 30 ATM, with a screw-down crown with double gasket, a unidirectional click bezel, holes in the lugs inspired by sports-car chassis and four exposed Torx screws front and back. Like the Cuscinetto it uses the Sellita SW 200-1, and it came in five colours, among them an ocean blue. The construction recalls the exposed-screw sandwich cases discussed in our Hublot Big Bang guide.
Leggero means light
Leggero means light. The Spyderleggero turns the shield into a more octagonal outline that recalls a bull's head. Its bezel and back are titanium and its middle is Anticorodal aluminium, held by eight visible Torx screws. The case measures 51.5 by 46 mm. The Skeleton is 14 mm thick, has a sapphire dial and display back, and uses a ruthenium-finished Sellita SW 200-1 with a skeletonised rotor. The Chrono, the flagship of the 2019 range, is 17 mm thick and uses the Sellita SW 500 BVa automatic chronograph with day and date, 25 jewels and a power reserve of 48 hours. Its counters are arranged to evoke an hourglass.
GT1 and the pedal pushers
The GT1 quartz chronographs take their name from grand tourers. The faceted steel case is 42 mm and 12.5 mm thick, water-resistant to 5 ATM, with a carbon-fibre dial. Its Start and Stop pushers are shaped like brake and accelerator pedals, and its counters recall a speedometer. The movement is the Ronda RL 5040 D. The GT1 came in five colours chosen to echo those once used on the family's vehicles. Its racing references place it among the motor-sport chronographs covered in our TAG Heuer Carrera, Monaco and Autavia guide.
Novemillimetri and Shock ABS
The current catalogue adds two families. Novemillimetri, nine millimetres in Italian, takes its name from an ultra-thin titanium case nine millimetres thick, with a silhouette based on hexagonal automotive forms. Shock ABS joined the range in 2024. The thin titanium case invites comparison with the Italian approach to slimness in our Bulgari Serpenti and Octo Finissimo guide, although the two belong to quite different tiers. The house's own shop lists Spyder as by far its largest family, followed by Cuscinetto, Shock ABS and Novemillimetri.
Movements and what they mean for service
Two Swiss movement makers account for most of what sits inside the modern range, and knowing which one you have tells you how a watch will age and who can service it. The answer matters more here than with many fashion names, because the cases are complex and the movements are standard.
Ronda in the quartz chronographs
The Spyder, Spyder X, New Spyder and GT1 use quartz chronograph calibres from Ronda, a family company founded in 1946 by William Mosset at Lausen in the canton of Basel-Country. It began by making spare parts and now employs more than a thousand people, with production in Switzerland and Thailand. The RL 5050 B, RL 5040 D and RL 5020 B are workhorse chronograph modules, widely stocked and straightforward for a competent watchmaker. The technology goes back to the first quartz wristwatch of 1969, told in our article on the Seiko Astron, the first quartz watch. A quartz Spyder needs a fresh battery every few years and a check that the chronograph hands return to zero; a leaking cell left for a decade is the main danger.
Sellita for self-winding calibres
The 2019 automatics use Sellita, founded in 1950 at La Chaux-de-Fonds in the canton of Neuchâtel. The SW 200-1 in the Cuscinetto, Panfilo and Spyderleggero Skeleton follows the architecture of the ETA 2824-2, and the SW 500 BVa in the Spyderleggero Chrono follows the Valjoux 7750. Both are among the most common Swiss calibres in circulation, so parts and expertise are easy to find. A full service follows the usual schedule for a Swiss automatic, and any independent watchmaker who handles these calibres can do it; the specialist part of the job is the case.
Titanium, sapphire and Torx screws
The cases are the harder part. Titanium is light and resists corrosion, but brushed titanium marks easily and is refinished differently from steel. The Torx screws need the right driver; a slipped screwdriver leaves scars on the screw heads and the case. Sapphire crystals resist scratches but can chip at the edge. The free-turning bearing bezel of the Cuscinetto should spin smoothly in both directions, without grit or rough spots, and every ball should be present. On the Panfilo the unidirectional bezel should click cleanly, and a watch rated to 30 ATM should be pressure-tested after any opening. Our Japonista grading and condition guide sets out how we describe these points.
The Japan thread
Japan has never been a headline market for the house, and the family did not name it among its key markets in 2019. Yet the name has a modest history there, carried by small importers rather than a national subsidiary, and it explains what turns up on the Japanese shelf today.
An importer near Okachimachi
A long-running directory of watch importers in Japan lists the Tokyo distributor for the brand as Komon Enterprise, at 3-37-9 Higashi-Ueno in Taito ward. That address sits a short walk from the wholesale streets described in our guide to Okachimachi, Tokyo's jewellery quarter, the district where watch and jewellery importers have clustered for decades. The directory is undated, and we could not establish when the arrangement began or ended, so we treat it as a historical pointer rather than a current contact.
The CG references on Japanese shelves
The older Tonino Lamborghini pieces that circulate in Japan are mostly quartz chronographs with references beginning CG, such as the CG206M, together with Spyder models numbered 3013 and 5015 and the occasional triangular-cased chronograph. Some of the CG pieces are described in Japan as limited editions. We have found no primary record of the edition sizes or of what the editions commemorated, so we do not repeat those claims here. What is clear is that these watches arrived in Japan in some numbers before the Swiss relaunch of 2019, and that they are the pieces most likely to appear in Japanese private collections now.
An official shop in Akasaka, 2021
On 12 February 2021, in the brand's fortieth year, an official Tonino Lamborghini shop opened inside the ANA InterContinental Tokyo at 1-12-33 Akasaka. The importer was CLS Central, a company based in Nishi-Azabu and founded in July 2017. The interior was built around hexagonal shapes, sharp lines and neon light; the red behind the bull stood for passion and energy, the black for strength and elegance, and a photograph of Ferruccio Lamborghini hung on the wall. The shop carried the eight Swiss lines alongside leather goods, business and travel bags, wallets, card cases, sunglasses and coffee cups. Opening in a Tokyo hotel during the pandemic was a bold move. We could not confirm from a 2025 or 2026 record that the shop still trades, so check before you travel, and see our collector's atlas of Tokyo boutiques for the wider map.
What the Japanese shelf holds now
In October 2026 we surveyed what is in circulation in Japan. The category itself is small: only a handful of pieces at any one time, and about two dozen relevant examples when we searched across the name. Most were quartz chronographs, many with flat batteries and some sold as not running; a few were boxed CG models described as unworn; and Swiss automatic Cuscinettos or Spyderleggeros were essentially absent. That shape matches the history: Japan received the quartz generation and saw little of the titanium automatics. Pieces kept in their boxes are a recurring Japanese habit, explained in our note on how Japan keeps jewellery and watches, and the condition terms used in descriptions are decoded in Japanese condition ranks explained.
Looking for a Spyder with its box and card, a boxed CG206M or one of the titanium Cuscinettos of 2019? Our team in Tokyo can search for it on your behalf.
The families at a glance
The table below sets out the main families, the year each first appeared, the movement and case of the documented versions, and the single thing most worth checking on each.
| Family | Introduced | Movement | Case | Check first |
|---|---|---|---|---|
| Cuscinetto | 1983; revived 2019 | Sellita SW 200-1 automatic (2019) | Titanium, 42 mm, 12 mm, 10 ATM | Bearing bezel turns freely, every ball present |
| Cuscinetto R | 2019 | Skeletonised Sellita SW 200-1 | Black DLC titanium, 42 mm, double side bridge | DLC wear on edges and bridges |
| Panfilo | 2019 | Sellita SW 200-1 | Titanium sandwich, 44 mm, 15 mm, 30 ATM | Bezel clicks; pressure test after opening |
| Spyderleggero Skeleton | 2019 | Ruthenium-finished Sellita SW 200-1 | Titanium and Anticorodal aluminium, 51.5 x 46 mm | Eight Torx screws unmarked |
| Spyderleggero Chrono | 2019 | Sellita SW 500 BVa automatic chronograph | Same case, 17 mm | Chronograph resets; day and date change |
| Spyder | 2007 or 2008 | Ronda RL 5050 B quartz chronograph (2019) | Steel shield, 44.3 mm, 13.7 mm, 10 ATM | Battery leakage; clasp with 3D bull |
| Spyder X | By 2019 | Ronda RL 5050 B | Steel shield, 53 x 56 mm, 16 mm | Size on the wrist; bezel layers |
| GT1 | By 2019 | Ronda RL 5040 D | Steel, 42 mm, 12.5 mm, 5 ATM | Pedal pushers operate cleanly |
| New Spyder | 2022 | Ronda RL 5020 B | Steel shield, 44 x 50 mm, 14.5 mm, 5 ATM | Suede strap condition |
| Novemillimetri | Current range | Not documented in our records | Titanium, 9 mm thick | Case finish on hexagonal flanks |
Timeline
| Year | Event |
|---|---|
| 1916 | Ferruccio Lamborghini born at Renazzo, near Cento |
| 1947 | Tonino born on 13 October |
| 1948 | Lamborghini Trattori founded; first Carioca tractors |
| 1962 | Ferruccio visits the Miura ranch in Seville; the bull is chosen |
| 1963 or 1964 | Automobili Lamborghini founded at Sant'Agata Bolognese |
| 1972–1974 | Tractor company sold to SAME; car company sold in two stages |
| 1981 | Tonino Lamborghini Style and Accessories founded |
| 1983 | Cuscinetto created; first example given to Ferruccio |
| 1993 | Ferruccio Lamborghini dies |
| 1995 | Tonino made a Commendatore of the Italian Republic |
| 2007 or 2008 | Spyder developed by the Centro Stile |
| 2011 | Company becomes Tonino Lamborghini S.p.A. |
| 2019 | Eight Swiss lines presented in October |
| 2021 | Fortieth anniversary; Akasaka shop opens on 12 February; North American agency |
| 2022 | New Spyder introduced |
| 2024 | Shock ABS joins the range |
Video: the heart of the watch
The short film below, The Heart of the Watch, comes from the house's own channel. It sets the watches in the family's mechanical world. Moving pictures give a better sense than catalogue photographs of how large these cases are.
Where the accounts disagree
The record is thinner than the brand's reach would suggest, and published accounts contradict each other on several points. We set out the disagreements instead of choosing silently.
| Point | One account | Another account | Our reading |
|---|---|---|---|
| Year the Spyder was created | 2007, in the English launch texts of 2021 | 2008, in the Italian launch texts of 2019 | Either; the catalogue history of the Centro Stile is not public |
| Gap between the first Cuscinetto and the revival | 36 years | 38 years | 1983 to 2019 is 36 years; the later figure appears to count to 2021 |
| Colours of the revived Cuscinetto | Five | Four | Five at the 2019 launch; four in a 2021 text |
| Founding of the car company | 1963, as Automobili Ferruccio Lamborghini S.p.A. | 1964 | Incorporation and first production fall either side of the new year |
| Start of Ferruccio's role as chief executive | 2016 | 2018 | He supported his father from 2016 and is recorded as chief executive from 2018 |
A sceptic's view
A fair reader will raise three objections. The first is the name. Many buyers assume a Tonino Lamborghini watch is a product of the car company, and some descriptions encourage the confusion. It is not, and a collector who wants the car company's own merchandise should look elsewhere. The value of these watches rests on the family story and the design, not on any tie to Sant'Agata.
The second is the licensing era. For many years the house authorised others to make its products. That spread the name through tens of thousands of points of sale, and it also means that quality varied with the partner and the period. The 2019 relaunch was in part a correction, and the family said as much when it described taking greater control of the project.
The third is the movement. A Swiss quartz chronograph is reliable and easy to service, but it does not carry the weight of a manufacture calibre, and even the automatics use standard Sellita movements. Italy's deeper watch heritage lies elsewhere, in the naval instruments described in our Panerai Radiomir and Luminor guide, and Italian sports-watch culture of the same decades is better represented by the brand in our Sector No Limits guide. Against all this, the Cuscinetto is a genuinely original idea from 1983, the shield case is instantly recognisable, and the 2019 titanium pieces are well specified for what they are. The design is the reason to own one.
Advice for collectors
Read the dial and the back
The dial and crown should carry the house's name and the bull shield; the Spyder X carries the shield on its crown and the sports models on the clasp. The back should state Swiss made and the reference. On the CG and Spyder quartz models, match the reference on the back to the dial layout. A watch whose name has been shortened to Lamborghini alone, or which carries the car company's lettering, needs a careful look. Our authenticity guarantee explains how we check pieces before they reach you.
Measure the case
Shield cases wear larger than their quoted diameter. The Spyder X at 53 by 56 mm and the Spyderleggero at 51.5 by 46 mm overhang many wrists, while the New Spyder and the 42 mm Cuscinetto are far easier. Lug-to-lug length matters more than diameter on these shapes.
Power and timing
For quartz models, ask whether the battery has been replaced recently and whether the chronograph starts, stops and returns to zero. For automatics, ask whether the watch winds, keeps time and changes date, and on the Spyderleggero Chrono the day as well. A watch described as not running is a gamble on the movement and on leakage damage.
Clasp, straps and screws
The branded folding clasps, in titanium on the 2019 automatics and in black PVD with a 3D bull on the shield models, are part of the watch and hard to replace. The 2019 pieces came with two interchangeable straps. Inspect every Torx screw for slipped-driver marks, which betray careless opening.
Box, card and the complete set
The presentation box, guarantee card, booklet and second strap add appeal, especially on the 2019 automatics, which are scarce in Japan. Our article on the value of a full set explains why. For the old CG chronographs a box matters less than a running movement.
Shipping and duties
A watch shipped from Japan may attract duties and taxes on arrival; our guide to import duties on luxury goods from Japan sets them out. For why the country holds so many well-kept pieces of every era, read why Japan is the finest place for pre-owned luxury, and for the street where Tokyo's fine watches have long been displayed, our portrait of Ginza, Wako and Seiko.
Questions readers ask
Do they come from the car factory?
No. They come from Tonino Lamborghini S.p.A., the lifestyle house founded in 1981 by Ferruccio Lamborghini's son. The car company is a separate business owned by the Volkswagen group through Audi.
Where are they produced?
The 2019 collection was presented as Swiss made, with Swiss quartz movements from Ronda and Swiss automatics from Sellita. Design is done in Italy at the house's head office near Bologna.
What is the Cuscinetto?
A model first created in 1983 whose bezel turns freely in both directions on small steel balls, like a ball bearing. It was revived in titanium with a Swiss automatic movement in 2019.
What inspired the Spyder's outline?
Its case reproduces the shield that encloses the charging bull in the family emblem. The name comes from the open two-seat roadster.
Who leads the firm now?
Ferruccio Lamborghini, born in 1991, Tonino's eldest son and the third generation, is vice-president and chief executive. His father, the founder, is president.
Is there an official shop in Japan?
An official shop opened at the ANA InterContinental Tokyo in Akasaka on 12 February 2021. We could not confirm that it still trades, so check before visiting.
Further reading
- Corum, for another house built on daring case shapes
- Gucci watches, for an Italian fashion name in Swiss-made watches
- Storm London, for a design-led label of bold steel cases
- Skagen, for a brand that made titanium part of its identity
- The watch almanac, for the family trees of every major house
- Police watches, from De Rigo's eyewear to the Swiss licence, for the 1983 eyewear brand that moved onto the wrist, and its Japan-only models
- Lancaster Italia watches: Bari, Intrigo and Ceramik, for the Bari house with the aluminium Intrigo and a Tokyo trademark ruling
References
- Tonino Lamborghini: Heritage
- Tonino Lamborghini: About the brand
- Tonino Lamborghini: The founder
- Tonino Lamborghini: Watches
- Tonino Lamborghini: Watch collection
- Tonino Lamborghini: Cuscinetto product page
- Tonino Lamborghini: New Spyder product page
- From tractors to lifestyle: interview with Tonino Lamborghini (2010, Italian)
- Tonino Lamborghini Swiss Watches 2019/2020 (2019, Italian)
- Tonino Lamborghini presents eight new watches (2019, Italian)
- Tonino Lamborghini Cuscinetto (2020, Italian)
- Tonino Lamborghini: racing legends and hyperwatches (2021)
- Tonino Lamborghini watches arrive in America (2021)
- Tonino Lamborghini brand profile
- Tonino Lamborghini Cuscinetto review
- Tonino Lamborghini watches: brand history
- Tonino Lamborghini: forty years in a book (2021, Italian)
- Tonino Lamborghini at forty
- Official Tonino Lamborghini shop opens at ANA InterContinental Tokyo (2021, Japanese)
- Directory of watch importers in Japan (Japanese)
- Tonino Lamborghini The Apex movement (2025, Japanese)
- SDF: Lamborghini Trattori history
- Lamborghini Trattori: history
- Museo del Marchio Italiano: Lamborghini
- History of the Lamborghini emblem
- Ferruccio Lamborghini
- Automobili Lamborghini
- Lamborghini Trattori
- Lamborghini Miura
- Lamborghini Countach
- Cento
- Argelato
- Armand Nicolet
- Tramelan
- Sellita
- Ronda AG (German)
- Quartz clock
- Chronograph
- Torx
- Sapphire crystal
- Carbon fibre reinforced polymer
- Titanium