Seikomatic and Bell-Matic: Seiko's Business Automatics, the Weekdater, the Alarm and Japan, 1960 to 1978
In 1960 Suwa Seikōsha, the Nagano works that is now Epson, put on sale the first Seikomatic, a self-winding watch thin enough to sit under a shirt cuff. Six years later the same house gave the business automatic a bell: the Bell-Matic, an automatic alarm watch made for the meeting room and sold in Japan as the Business Bell. Between those two dates sit the Selfdater, the Weekdater, a Seikomatic called Chronometer that became the first automatic Grand Seiko, and a thin branch that most collectors never learn to name. Our reading: the Seikomatic and the Bell-Matic are the working half of Seiko's golden decade, the watches a Tokyo office worker bought, and they explain the Grand Seiko of 1967 better than any Grand Seiko does. Our history of the Seiko house tells the story of the whole firm; this guide follows its business automatics from 1960 to 1978.
| Seikomatic and Bell-Matic, 1960 to 1978 | |
|---|---|
| Maker | Suwa Seikōsha for the 62 family and the Bell-Matic; Daini Seikōsha in Tokyo for the Seikomatic-P |
| First of the line | The Seikomatic of 1960 on calibre 603, with no hand-winding and a crown tucked in at four o'clock |
| Best-known model | The Weekdater of 1963, with the day spelt out on the dial |
| Rarest relative | The Seikomatic Chronometer of 1966, renamed 62GS |
| The bell | Bell-Matic calibres 4006 (day and date) and 4005 (date only), made from late 1966 to early 1978 |
| Successors | The Lord Matic for the automatics in 1968; the A133 digital alarm for the Bell-Matic |
1959: the lever that made the automatic easy
The Seikomatic exists because of a small part designed the year before it: the magic lever. In 1959 the Suwa works, newly independent as Suwa Seikōsha, released the Gyro Marvel, the first watch fitted with the magic lever winding system. The lever is a pronged arm driven by an eccentric on the rotor; it pulls a wheel round whichever way the rotor turns, so both directions of wrist movement wind the mainspring. It needed few parts and could be stamped out on a press, which kept the automatic only a little dearer than a hand-wound watch.
Why the Gyro Marvel was not enough
The Gyro Marvel solved winding but not thickness. Seiko built it by adding an automatic module to the hand-wound Marvel, and the movement grew to about 6.5 millimetres. A watch that thick sat high on the wrist and caught on a shirt cuff, which is a poor trait in a watch meant for the office. The engineers at Suwa set themselves a new target: a self-winding watch hardly thicker than a hand-wound one.
See also: The watch almanac, for the family trees of the houses that built their own automatics.
1960: the first Seikomatic, thin and without a winding crown
The first Seikomatic was thin because Seiko took things out of it. Its calibre 603 had no hand-winding at all, and the crown sat half-hidden at four o'clock, used only to set the time. The magic lever claws were reshaped to stop slipping and wind faster. The result was a movement about 4.7 to 4.8 millimetres thick, against about 6.5 for the Gyro Marvel.
Four jewel counts for one calibre
The 603 came in 17, 20, 21 and 30 jewel versions, and the count told the buyer which rung of the ladder he stood on. The 30-jewel version had a gold-plated movement, while the lower counts were rhodium plated. It is also the only movement of the family with a solid rotor, without the holes cut into the later ones. The 603 ran at 18,000 beats an hour, five beats a second, and production of the first type ran to about 1963. The calibre was later renamed 6201 under Seiko's four-digit system.
Sold under another name in Germany
The 603 also left Japan inside another maker's watch. The German house Kienzle fitted it to a watch called the Superiamatic, and the movement still carries its 603 stamp. For a Japanese movement of 1960, that is an early sign of how good the Suwa automatic already was.
From the beginning, the Seikomatic was meant to be the top of Seiko’s offerings; precise watches aimed at businessmen who appreciated the functions.
Andres Ibarguen, watch writer, 2023
A family that ran for ten years
The 603 is the origin of what Japanese collectors call the 62 family, and the line it began ran for nearly ten years with steady improvement. In the early years the name Seikomatic was treated almost as a brand of its own, with its own logo on the dial. An 18-carat gold case was offered on most models until 1964. Before 1964 the caseback carried a case number beginning with J, such as J14001; from 1964 it carried the calibre and case number, such as 8305-8000.
See also: Orient Star and the Hino watch house, for the other Japanese house that built automatics for the office in the same years.
1961 to 1962: the date and the water
Within two years the Seikomatic had learned to keep the date and to keep out water. Both steps mattered more to a salaried buyer than any jewel count, because a date saves a glance at the desk calendar and a sealed case survives a commute in the rain.
The SilverWave and the first waterproof automatics
The first waterproof automatic Seiko watches appeared in 1961 within the Seikomatic line, under the name SilverWave. With a screw-fit caseback, water resistance rose to 50 metres, enough for a swim or a day at the beach. A dolphin embossed on the caseback marked the water-resistant models.
See also: Vintage Seiko divers, for the water-resistant line that grew into the 62MAS and the Tuna.
The Selfdater: 394 and 395
The first Seiko automatic with a date arrived in 1962 as the Seikomatic Selfdater, on the 24-jewel calibre 394. Beside it stood the 395, with 39 jewels, a gold-plated movement and an individual serial number engraved on it. The 394 later became the 6205, the plain dated calibre of the family. The Selfdater with the 395 was rated to 50 metres, and an example dated January 1963 is among the best documented.
Where 39 jewels come from
The 395 is the watch that makes collectors count. Nine of its jewels are dummy jewels sitting beneath the calendar wheel, and six are tiny ruby balls serving as bearings for the winding system. Take those fifteen away and the 395 has 24 working jewels, the same as the 394. Our reading is that the 39 jewels were partly a sales argument, but the ruby ball bearings were real engineering, and they made the 395 a smoother winder.
1963: the Weekdater spells out the day
The Weekdater gave the business automatic its signature: the full day of the week written on the dial. It came in 1963 on the Seikosha calibre 400 with 33 jewels, and the movement soon became the 6206 with 26 jewels, beating at 18,000 an hour. Few watches of 1963 showed a date at all, and showing the day as a word was a step further.
A layout of its own
The Weekdater placed the day in a window by itself, halfway between the centre and the edge, apart from the date. Some cases put the day at nine o'clock; some dials printed the day in Japanese characters. The crown stayed recessed at four o'clock, as on the first Seikomatic. Our reading: the separate day window is the quickest way to tell a 1960s Weekdater from a later day-date at a glance.
Setting the day on a 6206
The 6206 sets the day in a way that surprises new owners. With the crown pulled to the last position, the owner moves the hour hand back from 1 a.m. to about 9:30 p.m. and forward again, and each pass moves the day on by one. The date then sets with the crown at the middle position, without moving the hands. A Weekdater that refuses this routine usually needs its calendar looked at rather than its hands.
The 6218 and the 6216
In 1964 the 6206 gained a more refined sibling, the 35-jewel 6218, with a fine regulator and a seconds-stop device. The 39-jewel 6216 followed for the Seikomatic Weekdater, and its quality is often compared with the movement of the 62GS. The 6206 and its siblings also went abroad under the Sea Lion name, in the M55 and M88 groups.
1966: the Seikomatic that became a Grand Seiko
The first automatic Grand Seiko began life as a Seikomatic. In 1966 Seiko sold a Seikomatic Chronometer on two new calibres, the 6245 with date and 35 jewels and the 6246 with day and date and 39 jewels, both beating at 19,800 an hour. The movements of the Chronometer and the 62GS were plated white rather than gold.
Why the word Chronometer had to go
Seiko certified the watches itself, and the Swiss chronometer authority objected to the word on a self-certified watch. Seiko dropped it. In the same year it set its own Grand Seiko Standard, stricter than the Swiss chronometer rule, and the watch was promoted to Grand Seiko as the 62GS. Seiko dates the 62GS to 1967 and calls it the first Grand Seiko with an automatic movement. Until then every Grand Seiko had been wound by hand: the first model of 1960, built on the Crown, and the Self Dater of 1964, with its quick-set date and 50-metre water resistance. The first Grand Seiko and the first Seikomatic came out in the same year.
A lion on the back, then the GS mark
Early 62GS production of 1966 has the case suffix -9000 and a lion medallion on the caseback; production of 1967 and 1968 has -9001 and a GS medallion. The 1967 catalogue described Grand Seikos but pictured Seikomatic Chronometers. The 62GS was overtaken by the automatic hi-beat 61GS in 1968, and the 6200 family was no longer needed after the 62GS was retired in 1969.
Our account of the King and Grand Seiko duel explains why Suwa needed a winning automatic in 1967. Our Grand Seiko and Credor guide follows the line the 62GS began. One heir of the Chronometer, a 62GS day-date reference 6246-9001 of 1967, is on our shelf today.
1963 to 1968: the thin branch
Seiko ran a second, thinner family of business automatics beside the 62 family, and it is the one most collectors misname. From about 1965 the range was split into sub-ranges: Seikomatic on the 62 calibres, Seikomatic-R on the 83 calibres and, once the 5106 arrived in 1967, Seikomatic-P on the 51 calibres. The name Weekdater disappeared from the dial in the same reorganisation.
The Seikomatic Slim and calibre 830
The thin branch began with the Seikomatic Slim of 1963 on calibre 830. At 28.6 millimetres the 830 was a little wider than the 603, but at 3.8 millimetres it was a full millimetre thinner. A date came in June 1965 with the 840, or 8305B, which added a millimetre and was still a millimetre thinner than a dated 62 calibre. The 8305C followed a few months later and added hand-winding.
Seikomatic-R and Business-A
The day-date 8306, with 30 jewels and hand-winding, was introduced in 1965 and had a production run of about four years. Seiko sold the same models as both Seikomatic-R and Business-A, which still confuses buyers today. From 1967 the Business-A was also offered with the 27-jewel 8346, and casebacks were often marked 8306/46 because the same case served both. Outside Japan the 8306 powered Sea Lion models of the M77, M99 and M110 groups.
No magic lever inside
The 83 family does not use the magic lever. Its rotor drives a pair of transfer wheels that turn in opposite directions, an integrated system that makes the movement thinner and, to one restorer, smoother than the lever. Our reading: the 83 family is Seiko's dress automatic of the 1960s, and its slimness is the reason to choose one over a Weekdater.
1967: Daini's answer, the Seikomatic-P
The most complex of the business automatics came from Seiko's other watch works, Daini Seikōsha in Tokyo. The Seikomatic-P of 1967 ran on calibre 5106, with 33 jewels and a beat of 19,800 an hour. In Japan it was also catalogued as the 51 Seikomatic Weekdater.
A date set by pressing the crown
The P stands for press: the date sets by pressing the star-shaped crown, a pusher inside the crown. Day and date share one window at three o'clock, and the date changes instantly in a single step. The 5106 also has hacking seconds, hand-winding and a fine regulator shaped like a tadpole. All 33 jewels work, with six cap jewels and jewels on both sides of the barrel arbor. Versions with the day in Japanese characters were offered beside the English day disc.
It is probably the single most complex calendar design of anything Seiko produced through that period.
Martin, watch restorer, 2021
From Seikomatic-P to Presmatic
In 1968 the Seikomatic-P became the Presmatic, named after the same press-to-set crown, and it was sold until at least 1970. A hi-beat Presmatic at 28,800 an hour followed in 1969 on the 5146. The 5106 ended in 1970 and the 5146 in 1971. Our reading: the 5106 is the strongest case for Daini as an equal of Suwa in the 1960s.
1967 to 1968: the name gives way
The Seikomatic name was retired in 1967, and the watches carried on under plainer names. The 6206 Seikomatic became the Business, in the same cases with the same references, and the 83 family became the Business-A. The Business group was aimed at young professionals and was made up of automatic day-date watches.
The Lord Matic takes over
In 1968 the business models were discontinued to make way for the Lord Matic, on the new 56 calibres. The hi-beat 61 calibres did the same at the top of the range. The same years brought the automatic chronograph of 1969 on calibre 6139. The Seikomatic had done its job: an automatic watch was now ordinary for a Japanese worker.
See also: The Seiko 6139, for the automatic chronograph Suwa built as the business automatics bowed out.
1966: a bell for the business automatic
The Bell-Matic added the one function an office worker could not get from a Weekdater: a reminder. The first model, the 4006-7000, reached the Japanese market in 1966 with a 27-jewel calibre 4006A, the first automatic alarm movement with a full central rotor. The earliest dated example in a large photo study was made in November 1966. In Japan the watch was also called the Business Bell, because it was planned to call its owner to meetings and appointments.
Two barrels, one for the bell
Like the Swiss alarm watches before it, the Bell-Matic keeps two separate mainsprings, one for the time and one for the alarm. That way the bell never drains the power that keeps the watch running. The alarm mainspring has its own seat and is described by the parts sheet as self-greasing. The going train is wound only by the rotor through the magic lever; the Bell-Matic has no hand-winding, so the crown is free to wind the alarm.
The sound comes from a ring
The sound comes from a small hammer striking a curved metal sounding spring around the movement. The release is worked by a wheel sitting on top of the hour wheel, which lifts a lever at the set time and frees the alarm spring. Seiko itself describes the ring as both beautiful and discreet. The alarm runs for about ten to twelve seconds and fades as its spring unwinds.
Unlike the annoying electronic alarms of today, this one does not need to be silenced.
David Flett, watch writer, 2020
Crown, button and ring
The Bell-Matic is worked with a crown at three and a push-pull button at two. With the button pushed in, turning the crown winds the alarm and feels like winding a hand-wound watch. Pulling the crown to its first position lets the owner turn the inner ring and set the alarm marker for any time in the next twelve hours. Pulling the button out arms the alarm, pushing it in disarms it, and pushing it to a second position sets the date quickly. The movement measures 31.20 millimetres across and 7.15 millimetres high, runs at 19,800 beats an hour and has Diashock protection.
A short history of the Bell-Matic, with a demonstration of setting and winding the alarm.
1966 to 1978: twelve years of Bell-Matic cases
The Bell-Matic outlived the Seikomatic by a decade and changed its clothes many times. A study of 1,956 dated watches runs from November 1966 to February 1978. The first 4006-7000 alone was made from November 1966 to September 1969.
The Business Bell and the early cases
The Seiko Museum Ginza holds a Business Bell of 1967 and calls it the first watch with self-winding, water resistance, a calendar and a bell alarm together. The early 4006-7000 has a cushion case, a 27-jewel movement and, in the first lots, a dolphin on the caseback. The Business Bell was related to the Business-A and appeared only briefly in the late 1960s. All Bell-Matic dials carry the Suwa mark.
See also: Ginza and the watch, for the street where the Seiko Museum shows the Business Bell today.
The 4005: a date and a home market
The 4005 Bell-Matic shows only the date, and it was made for just twelve months, from June 1968 to May 1969, for Japan alone. Five models made up the range, all on metal bracelets. It stayed in Japanese catalogues until 1973, catalogued as the Business Bell Calendar with 27 jewels.
From 27 to 17 jewels
The Bell-Matic came with 27, 21 and 17 jewels, and within two years all markets had the 17-jewel version. The cut is usually explained by a United States import duty that fell more heavily on watches with many jewels. The 17-jewel calibre was a light revision: its parts sheet names only three parts of its own, the barrel and train-wheel bridge, the calendar plate and the rotor.
UFO, hexagon and the last cases
From about 1969 the cases grew bolder, starting with a 44-millimetre UFO case with a dark resin bezel in the manner of the UFO diver. Later came hexagonal cases integrated with their bracelets and, last, the 606x with a smoky fumé dial. In late 1973 or early 1974 the casebacks changed to a plain style. The line ended in February 1978, made obsolete by the A133, the first digital watch with an audible alarm.
See also: The Seiko Astron, for the quartz watch of 1969 that ended the mechanical decade. Casio beyond the G-Shock, for the Japanese house that made the digital alarm everyday.
The alarm watches that came before
The Bell-Matic was not the first alarm wristwatch, and it was not the first automatic one. The Swiss house Vulcain released the Cricket, a manual alarm watch, in 1947. Jaeger-LeCoultre followed with the Memovox in 1950 on the hand-wound calibre 489, and in 1956 added a bumper-wound automatic Memovox, the first automatic alarm watch. Tudor offered a hand-wound alarm, the Adviser, in 1959.
What Seiko added
Seiko's step was a full rotor that winds in both directions, a decade after the bumper Memovox. The layout, with one crown and a push-pull button at two, resembles the Cricket. Our reading: the Bell-Matic is the alarm watch made ordinary, an automatic with a day, a date and a bell that a young salaried worker could wear every day.
Our guide to the Vulcain Cricket tells the story of the first alarm wristwatch of the post-war years. Our Jaeger-LeCoultre guide follows the Memovox.
Know the watch at a glance
The calibre number on the caseback tells you which family you hold, and the family tells you what to expect. The table sorts the business automatics by calibre.
| Calibre | Name on the dial | Years | Jewels | What it shows |
|---|---|---|---|---|
| 603, later 6201 | Seikomatic | 1960 to about 1964 | 17, 20, 21 or 30 | Time only, no hand-winding |
| 394, later 6205 | Seikomatic Selfdater | From 1962 | 24 | Date |
| 395 | Seikomatic Selfdater | From 1962 | 39 | Date, ruby ball bearings |
| 400, later 6206 | Weekdater, then Business | 1963 to 1968 | 33, then 26 | Day spelt out, date |
| 6218 and 6216 | Seikomatic Weekdater | 1964 and 1966 | 35 and 39 | Day and date; the 6218 adds a fine regulator |
| 6245 and 6246 | Seikomatic Chronometer, then 62GS | 1966 to 1969 | 35 and 39 | Date, or day and date |
| 830, 8305, 8306, 8346 | Seikomatic Slim, Seikomatic-R, Business-A | 1963 to 1968 | 30 or 27 on the 8306 and 8346 | Thin; date or day and date |
| 5106 | Seikomatic-P, then Presmatic | 1967 to 1970 | 33 | Day and date, press-to-set crown |
| 4006 | Bell-Matic, Business Bell | 1966 to 1978 | 27, 21 or 17 | Alarm, day and date |
| 4005 | Bell-Matic, Business Bell Calendar | 1968 to 1969 | 27 | Alarm and date only |
What to check on a used Seikomatic or Bell-Matic
These watches are sixty years old, and the common faults are known. Our checks below draw on restorers who have opened many of them.
Match the dial, case and caseback
The dial, hands, alarm ring, case and caseback numbers should all match. Mixed parts are common on the Bell-Matic, and a large photo study warns that many of its watches are incorrect mixes. The alarm setting ring depends on the dial number, so a wrong ring is a sign of a swapped dial. On a Bell-Matic, a caseback reading Water Proof rather than Water Resistant points to the earlier years.
Ring the alarm before anything else
Set the alarm a few minutes ahead, and check that it rings at that time and that it can be stopped. A worn disconnecting lever can make the bell ring the moment the button is pulled out. White Bell-Matic dials are prone to browning, while blue, black and gold dials tend to age well.
The calendar and the crown
On a 6206, set the day by the hour-hand routine and the date by the crown at its middle position. On a 5106, avoid using the press-to-set date during the changeover hours. Many Seikomatic crowns are recessed at four o'clock and small, so a replacement crown is common and worth noting. On an 8306 or 8346, check that hand-winding works, because the feature is what sets these apart from the 6206.
Our guide to Japanese condition ranks explains how a Japanese grade reads. Our grading guide sets out how we describe a watch, and our authenticity guarantee explains how we check each one. For boxes and papers, see what makes a full set and how Japan keeps watches in the box.
The shelf in Japan this week
On the home shelf, the business automatics are mostly Weekdaters and thin 83-family watches, and the Bell-Matic is a small slice. On 31 October 2026 at about 07:29 Japan time we read the titles of 1,162 unique Japanese offers across three searches for the Seikomatic, the Bell-Matic and Seiko Business. We set aside 277 titles about modern watches that only used the word business, 158 for parts, dials, movements or boxes alone, and 11 mixed lots, which left 716 watches.
| Family named in the title | Watches | Share |
|---|---|---|
| Seikomatic-R or Business-A, 83 calibres | 150 | About 21 per cent |
| Weekdater, 6206 | 146 | About 20 per cent |
| Seikomatic Slim, 830 | 32 | About 4 per cent |
| Seikomatic-P, 5106 | 31 | About 4 per cent |
| Selfdater, 394 or 6205 | 28 | About 4 per cent |
| First Seikomatic, 603 or 6201 | 24 | About 3 per cent |
| 6218 and 6216 together | 20 | About 3 per cent |
| Seikomatic Chronometer, 6245 or 6246 | 11 | About 2 per cent |
| SilverWave | 5 | Under 1 per cent |
| Bell-Matic or Business Bell, 4006 and 4005 | 60 | About 8 per cent |
| Seikomatic, calibre not stated | 209 | About 29 per cent |
What the census shows
Of the 60 Bell-Matics, 35 named the day-date 4006, 19 the date-only 4005 and 18 the Business Bell name. The 4005 is a third of the Japanese Bell-Matic shelf, although it was made for one year only, which fits its Japan-only life. Only 163 titles said the watch was running and 43 said it was faulty or sold as found, so most offers state nothing about the movement. Only 21 named a box, papers or original bracelet. We record no prices here.
See also: Why the world's treasures came to rest in Japan, for why so many period watches stayed in the country, and Okachimachi, for the Tokyo quarter where many of them change hands.
The business automatics in dates
| Year | Event |
|---|---|
| 1959 | Suwa Seikōsha becomes independent; the Gyro Marvel brings the magic lever |
| 1960 | First Seikomatic, calibre 603 |
| 1961 | SilverWave, the first waterproof Seiko automatics |
| 1962 | Seikomatic Selfdater, 394 and 395 |
| 1963 | Weekdater on calibre 400; Seikomatic Slim on 830 |
| 1964 | 6218 with fine regulator; calibre and case numbers on casebacks |
| 1965 | 8305 with date and the 8306 day-date; the Seikomatic-R name |
| 1966 | Seikomatic Chronometer 6245 and 6246; first Bell-Matic 4006-7000 |
| 1967 | 62GS; Seikomatic-P 5106; Seikomatic name gives way to Business; Business Bell |
| 1968 | Lord Matic replaces the business automatics; 4005 Bell-Matic; Presmatic |
| 1969 to 1972 | Bell-Matic moves to 17 jewels and bolder cases |
| 1978 | Last Bell-Matics, February |
Where the record differs
The record of these watches is mostly firm, but seven dates and figures differ between careful writers. We give each version and our reading.
- The Bell-Matic launch: one restorer places the first 4006-7000 in mid-1966, the earliest dated watch in a large photo study is from November 1966, and a Japanese specialist gives the launch as 1967, the year Seiko gives for its Business Bell. Our reading: production began late in 1966 and the watch was in the shops in 1967.
- The first Seikomatic: 1960 in most accounts; one specialist long gave 1961 and corrected it to 1960 in June 2025.
- The thickness of the 603: about 4.7 millimetres against 6.5 for the Gyro Marvel in a Japanese account, and 4.80 against 6.55 in an English one. The difference is rounding, not a different movement.
- The 62GS: some date it to 1966, the year of the -9000 cases with the lion medallion; Seiko dates it to 1967. Our reading: 1966 for the Chronometer, 1967 for the Grand Seiko name.
- The end of the Weekdater: one account says it was discontinued in 1967; another says the Weekdater name was dropped about 1965 when the range was split. Both can be true, since the 6206 lived on under the Business name.
- The 21-jewel Bell-Matic: one Japanese account gives 1967 to 1968; another says all markets had 17 jewels within two years; a restorer owns a 27-jewel watch of 1970. Our reading: the jewel cut was first for export, and Japan kept 27 jewels for longer.
- The Business Bell's life: one account has it gone from Japanese catalogues by 1970, while the 4005 Business Bell Calendar was still catalogued in 1973.
A correction to the common story: the Bell-Matic is often called the first automatic alarm watch, but the bumper-wound Memovox came ten years earlier; what Seiko built first was an alarm watch with a full winding rotor.
What we checked and left out
Four claims reached our notes and did not reach this guide.
- That the Bell-Matic's rotor also winds the alarm. One collector page says so; the restorers who have opened the movement show the alarm wound by the crown alone.
- That Seiko copied the Vulcain layout. One writer wonders about it, but no document shows it, so we only note the likeness.
- Production totals. No reliable figure for any Seikomatic or Bell-Matic reference has been published, so we give none.
- Period prices from Japanese catalogues. They exist, but we do not print prices in our Journal.
Why the business automatics matter
The Seikomatic and the Bell-Matic matter because they show how Seiko turned a hard technical problem into an everyday object. The magic lever made the automatic simple to build; the Seikomatic made it thin; the Weekdater and the Bell-Matic gave it the functions of a working day. The best of these movements was good enough to become the first automatic Grand Seiko. And the Japanese shelf still holds hundreds of them, mostly Weekdaters and thin Business-A watches, with the Bell-Matic as the rarer and more talkative relative.
For the collector, this is the most direct way into Seiko's golden decade: the same factories, the same engineers and often the same calibres as the King and Grand Seikos, in watches built for the office. Our guide to collectible watches from Japan places them among the wider field. Our guide to vintage Citizen watches shows the rival house's answer in the same years. The Seiko collection and the wider collectible watches collection hold the pieces we describe today. Our view is that a working Weekdater or Bell-Matic, with matching parts and a bell that rings, is the most honest witness to how Japan learned to make the automatic watch its own. That is our reading.
Answered plainly
What was the first Seikomatic?
A self-winding watch of 1960 from Suwa Seikōsha on calibre 603, with no hand-winding and a crown at four o'clock.
What is a Seiko Weekdater?
A Seikomatic of 1963 onward that shows the day as a word in its own window, beside the date; most run on calibre 6206.
Was the Bell-Matic the first automatic alarm watch?
No. The Memovox of 1956 was automatic, wound by a bumper. The Bell-Matic of 1966 was the first automatic alarm with a full rotor.
Can you hand-wind a Bell-Matic?
No. The rotor winds the watch; the crown winds only the alarm, with the button pushed in.
Which Bell-Matic is rarest?
The date-only 4005, made for twelve months for Japan, and the early 27-jewel 4006-7000 with the dolphin caseback, are the ones collectors look for.
Is a Seikomatic Chronometer a Grand Seiko?
It is the watch that became the 62GS. The movement and case references are the same; the name changed after the Swiss objected to the word Chronometer.
What does Business-A mean?
The later Japanese name for the thin 83-family day-date automatics, also sold as Seikomatic-R.
With care from Tokyo,
The Japonista Curation and Concierge Team
Further reading
- Up: The Seiko house, for Hattori, Seikōsha, Suwa and Daini.
- Up: The watch almanac, for the family trees of the great houses.
- Across: King versus Grand, for the factory duel the 62GS belonged to.
- Across: The Vulcain Cricket, for the alarm watch the Bell-Matic resembles.
- Across: Jaeger-LeCoultre, for the Memovox.
- Bridge: Ginza and the watch, for the street of Seiko's flagship and museum.
- Bridge: Japanese condition ranks, for reading a Japanese grade.
- Down: Seiko, for the Seiko pieces we describe today.
- Down: Our authenticity guarantee, for how we check every watch.
Begin a private request if you are looking for a particular business automatic, from a 30-jewel first Seikomatic to a date-only Bell-Matic 4005. We search Japan for it and check it before it leaves.
References
- Seiko Business Bell, 1967 (The Seiko Museum Ginza)
- Seiko watches, early period (The Seiko Museum Ginza)
- The first Grand Seiko (The Seiko Museum Ginza)
- Grand Seiko Self-Dater (The Seiko Museum Ginza)
- Grand Seiko: the challenge (The Seiko Museum Ginza)
- Seiko Group chronology (Japanese) (Seiko Group)
- The magic lever, core technology of the automatic watch (Japanese) (Epson)
- The history of Seiko automatic watches (MS Company)
- Seikomatic calibre 603 (Japanese) (Nakahiro collection)
- Seiko Bell-Matic calibre 4006A explained (Japanese) (Firekids Magazine)
- Seikomatic (Amateur Watch Fettler)
- Bell-Matic: the Seiko 4006-7021 (Adventures in Amateur Watch Fettling)
- A technical tour de force: Seikomatic-P (Adventures in Amateur Watch Fettling)
- Seiko Business-A 8346-9000 (Adventures in Amateur Watch Fettling)
- The Seikomatic, Business and Presmatic ranges (Watch and Vintage)
- History of the Seiko Weekdater (Coronet)
- Revisiting the Seiko Bell-Matic history (Coronet)
- Seiko Bell-Matic: the complete guide (Beyond the Dial)
- Seiko Bell-Matic image study (Seiko World Time)
- Seiko calibre 4006 (Tempus Europa)
- Seiko blue book: automatic movement chronology (GrailWatch reference)
- Seiko 6200 (GrailWatch wiki)
- Grand Seiko 62GS (The Seiko Guy)
- Seiko calibre 6206 (The Seiko Guy)
- Seiko calibre 8306 (The Seiko Guy)
- Seiko calibre 5106 (The Seiko Guy)
- Seiko 40BC-012, Business Bell Calendar (Tiny Hour Tales)
- Seiko 4005-7000, 27-jewel Bell-Matic (The Watch Spot)
- Seiko 4006-6031, 17-jewel Bell-Matic (The Watch Spot)
- The Seiko calibre 8306A (The Watch Spot)
- Seiko 8305-5000 Seikomatic-R (The Watch Spot)
- Grand Seiko 62GS (Watch-Wiki)
- Seiko 5100 (Watch-Wiki)
- Vintage Grand Seiko models (The Grand Seiko Guy)
- Jaeger-LeCoultre Master Memovox: the sweet sound of time (Fondation Haute Horlogerie)
- 1963 Seiko Seikomatic Self-Dater, 39 jewels (Hub City Vintage)