Revue Thommen: Waldenburg, the Cricket, the Landmark and the Japan Thread

Revue Thommen is the watch brand of a company founded in 1853 in Waldenburg, a small town in the canton of Basel-Landschaft. Over its long life the firm made pocket watches under the initials G.T., wristwatches under the name Revue, flight instruments under the name Thommen, and from 1987 watches under the joined name Revue Thommen. It belongs in our Watch Almanac of houses, family trees and references, on the branch of Swiss makers whose second trade was the cockpit. This guide covers the town and the founding, the G.T. years, the Revue name, the instrument business, the altimeter for climbers, the Cricket alarm, the outdoor watches of the 1980s and 1990s, the Airspeed pilot line, the in-house calibres, the licences after 2000, the long Japan thread, what the Japanese secondary market holds today, how to read the references, where the records disagree and the checks we make before a piece leaves Tokyo.

Revue Thommen in brief

Most of what a collector meets in Japan comes from three decades: the Cricket alarms of the late 1980s and 1990s, the Landmark family of quartz outdoor watches from 1986 onward, and the Airspeed pilot watches from 1996. Older Revue wristwatches with in-house calibres turn up too, along with the odd pocket watch.

Pass, mules, rails

Mule paths, Oberer Hauenstein

Waldenburg sits at the head of a narrow valley south of Basel, below the Oberer Hauenstein pass at 734 metres. For centuries this was the shortest route from the Rhine towards the Swiss plateau and Italy, and the traffic that crossed it, carts, pack animals, merchants and soldiers, gave the farming families of the valley extra work as carters, innkeepers and smiths.

The railway changed that. When the line from Basel to Olten through Liestal was built in the 1850s, the trains went through a tunnel further east, and the old pass road lost its trade. The valley feared unemployment and emigration. Its answer was unusual: the municipality itself set up a watch factory.

The Société d'Horlogerie à Waldenbourg

In 1853 the town founded the Société d'Horlogerie à Waldenbourg to give work to its people. The factory assembled watch movements from bought-in blank movements, known in the trade as ébauches. It did not do well. In its first years it ran up a deficit of more than 35,400 francs, a heavy load for a small municipal purse.

In 1859 the town sold the business to two private owners: Gédéon Thommen, a local entrepreneur who had sat on its board since 1857, and Louis Tschopp, a watchmaker from Biel. Under private management the factory recovered.

Waldenburg today has a little over a thousand residents. The old town is listed as a Swiss heritage site of national significance, and so is the villa Gédéon Thommen built with its park. The factory buildings stand empty, a reminder that a watch brand can outlive the place that made it.

Gédéon Thommen and the G.T. years

Sole owner, 1869 to 1870

Louis Tschopp left in 1869, and from 1870 Gédéon Thommen ran the firm alone under the name Gédéon Thommen Uhrenfabrikation. In the same year he patented a system that made individual movement parts interchangeable and applied for a patent on keyless winding, the remontoir. He also built a new factory building, because he wanted to make the parts for his movements in his own workshops rather than depend on outside makers.

About 4,000 watches left Waldenburg in 1870. The brand on them was G.T., for Gédéon Thommen. Cylinder escapement watches came first; from 1875 the factory also made lever escapement pocket watches.

A railway and a jumping hour

Thommen was also behind the Waldenburgerbahn, the little steam railway that opened on 1 November 1880 between Liestal and Waldenburg. The line was 13.1 kilometres long and ran on a narrow gauge of 750 millimetres, a gauge it kept until 2021, before it was rebuilt to metre gauge and reopened in December 2022.

The railway inspired a watch. In 1885 the factory developed the Springeruhr G.T., a pocket watch whose hour jumps in a window rather than being shown by a hand. The house history ties the idea directly to the building of the new line, though it does not say how. More workshops were built the same year to allow production in volume, and by 1890 the factory made about 13,000 watches a year.

Gédéon Thommen died in December 1890. His son Alphonse took over. In 1892 Alphonse also set up a small business in Waldenburg making watch parts and screws, which became the firm Tschudin and Heid in 1900.

The Revue name

A company and a brand, 1905 to 1910

In 1905 Alphonse turned the family business into a joint-stock company, Thommens Uhrenfabrik AG, using the French form Fabrique d'horlogerie Thommen S.A. alongside it. The brand on the watches changed from G.T. to Revue. The year of that change is given as 1908 in one detailed company history and as 1910 in the house chronology; the watches themselves do not settle it.

The firm grew beyond Waldenburg. A plant opened in Gelterkinden in 1915 and another in Langenbruck in 1919, and the house chronology also records a branch in La Chaux-de-Fonds, the centre of the Swiss watch trade in the Jura. In 1911 the factory made a Blériot pocket watch, honouring Louis Blériot's flight across the English Channel on 25 July 1909.

Revue in America

From 1923, the house says, its watches were imported into the United States by A. Wittnauer, the New York firm founded by the Swiss emigrant Albert Wittnauer, under the name Majestic Watch Co. Wittnauer's own early watches were largely built on Swiss movements, Revue Thommen among them. Longines bought Wittnauer in 1950, a link worth knowing if you collect either, and one we follow in our guide to Longines from Saint-Imier to Tokyo.

Revue Sport

Revue Sport appeared in 1934: a steel, water-resistant case with the words Revue Sport on the dial, made for men and women in round and square forms. A late-1930s demonstration, the house says, showed its shock resistance by dropping it from an aircraft. The model ran for many years and was made on both sides of the war. From 1941 the factory made and cased watches with Revue movements for Vertex, a British brand, sold as Vertex and Vertex Revue; and in 1944 the German government commissioned Revue Sport watches for its army, air force and navy. Neutral Switzerland sold to both camps, and Waldenburg was no exception. The firm reissued it in 1994 as the Revue Sport 50's and 30's.

Two rare timer watches with rotating bezels followed in 1941. One had a central hand that made a turn in twelve minutes, with a coloured bezel for timing telephone calls. The other turned once in forty-five minutes and showed the time left in a match. Both are now scarce.

Instruments for the air

The first cockpit clock, 1915 to 1916

The Swiss Air Force was founded on 31 July 1914, three days after the outbreak of the First World War. Its first aeroplanes came from France, and they needed instruments. In 1915 the federal government gave Thommens Uhrenfabrik an order to develop cockpit instruments, and in 1916 the first pilot's chronograph was handed over to the air force. That order is the root of everything in this guide that measures height, speed or time in the air.

Two men shaped the instrument side. Eduard Mettler led the technical work for many years. Reinhard Straumann, an engineer and air-force officer, joined from the air force in 1918, and his contacts kept the firm close to its main customer. The Straumann family became central to the company: Hermann Straumann, Gédéon Thommen's son-in-law, ran it from 1932 to 1938, and his son Roland Straumann chaired the board from 1944 to 1994.

The C-35 order, 1936

The turning point came in 1936. The Swiss military ordered a new two-seat reconnaissance biplane, the EKW C-35, built by the federal aircraft works at Thun; the first was delivered in May 1937, and ninety were built in all. Thommen supplied its altimeters, airspeed indicators and vertical speed indicators. To keep the research and production for this large order apart from watchmaking, the firm set up a separate division, Thommen Flight Instruments. From then on the company had two main trades. The house chronology records 200,000 watches made by the same year.

Starfighters and Tornados

After the war the instrument business grew into a maker of equipment for military and civil aviation. The house lists on-board chronographs in the Lockheed F-104 Starfighter flown by the West German air force, which took more than 900 of the type, and in the Panavia Tornado flown by the Royal Air Force, a jet that first flew on 14 August 1974. It also claims more than eighty aviation customers. In the 1990s the instrument side expanded further and gained aviation maintenance and production approvals in the 2000s.

Instruments after the watches left

The instrument business went its own way. In 2012 the old parent, Revue Thommen AG, was bought by a subsidiary of the Transas group; in May 2015 it was renamed Thommen Aircraft Equipment AG, and in 2016 it moved from Waldenburg to Muttenz. Production of mechanical instruments under the Thommen name passed to a Swiss subsidiary of a French maintenance firm the same year. Thommen Aircraft Equipment still presents itself as a maker of Swiss aircraft instruments with roots in 1916.

An altimeter for climbers

The pocket altimeter, 1945

In 1945 the company turned its flight-instrument knowledge to the mountains and launched a pocket altimeter for alpinists. It is an aneroid instrument: a sealed capsule expands and contracts as air pressure changes, and a train of levers turns that movement into a reading of height. Because pressure also changes with the weather, the same instrument doubles as a barometer, and an experienced climber reads a rising altitude at a fixed camp as a falling barometer and a warning.

Variants followed for parachutists and for other sports. The house says a Thommen altimeter was used for weather forecasting on the 1978 ascent of Everest by Reinhold Messner and Peter Habeler, the first climb to the summit without supplementary oxygen. Messner had already climbed Manaslu in 1972 with an Austrian expedition, a detail that will matter later in this guide.

The industrial measurement line that made the altimeters closed at the end of 2010, when the parent company decided to concentrate on aircraft. Its production, calibration and repair work, staff included, went to Huber Instrumente in nearby Reigoldswil.

Why the altimeter matters in Japan

In Japan, Thommen altimeters are widely known among climbers, and in Japan the name is as closely tied to mountaineering as to watches. We think that reputation helped the wristwatches when the Landmark and Altimark arrived, because a Japanese walker who had carried a Thommen altimeter already knew the name on the dial. That is our reading, not a documented sales strategy.

MSR and the Cricket

Five houses, one holding, 1961

In 1961 Thommens Uhrenfabrik joined four other Swiss watchmakers in a holding called Manufactures d'Horlogerie Suisses Réunies, or MSR: Vulcain of Le Locle, Buser of Niederdorf, Phénix of Delémont and Marvin of La Chaux-de-Fonds. The Waldenburg company's holding was a major shareholder. The aim was to pool manufacturing skill and face a world market that was changing fast, and the pressure only grew when low-priced quartz watches arrived in the 1970s and 1980s.

Inside the group, the Revue wristwatch was licensed to Vulcain, and wristwatch production in Waldenburg stopped. That detail is easy to miss and matters for dating. A Revue or Revue Thommen wristwatch made between the 1960s and the end of the century may have been designed, cased or finished in Le Locle rather than in the valley south of Basel. Up to 1999 the watches were made by the licensee, by then called Vulcain et Studio SA.

The Cricket, 1947

The Cricket began at Vulcain. In 1947 the Le Locle house brought out a wristwatch with a mechanical alarm loud enough to wake its wearer, and its piercing note reminded people of a chirping cricket, which gave the watch its name. A rival date of 1951 also appears; the house chronology keeps 1947.

The watch became known as the President's Watch. Robert Ditisheim, head of Vulcain, gave a Cricket to Harry S. Truman, the thirty-third president of the United States, who held office from 1945 to 1953. The house goes further and says every later American president received a Vulcain or Revue Thommen Cricket, and that Mikhail Gorbachev did too. We repeat that as the house tradition. We have not seen a record for each president, and a collector should treat the line as lore, not provenance.

The Revue Thommen Cricket, 1987 to 1999

As the other MSR names faded, the Cricket was reissued under the Revue Thommen name in 1987. The first pieces kept the original alarm calibre with its pusher at two o'clock. From 1993 the watch used a Schild alarm calibre, and the same year brought a GMT version with a twenty-four-hour dial. Between the two, in 1991, came the Cricket Nautical, quite different from the Vulcain original, with a Schild mechanical alarm, a rotating bezel under the crystal and water resistance to 200 metres, in steel or gold. The house says these Revue Thommen Crickets were made in large numbers and became a cult object across Europe; the watch museum in La Chaux-de-Fonds shows one with a blue dial beside the Vulcain originals.

That run ended in 2001. When Vulcain was re-founded as a manufacture that year it bought back its trademark rights, and the Cricket name could no longer be used by anyone else. A Revue Thommen Cricket is therefore a closed chapter: made from 1987 until the licensee stopped production in 1999, and never revived under that name.

Landmark and the outdoor watches

A sun compass on the wrist, 1986

The Landmark is the watch most collectors in Japan mean when they say Revue Thommen. It began in 1986 as a quartz watch with a twenty-four-hour scale that let the wearer find a bearing from the sun. The principle is old. Because the sun crosses the sky at a steady rate, a hand that turns once a day can be aimed at it, and the dial then gives a rough north-south line. It is an approximation that summer time and latitude both disturb, but on a clear day it works.

The next year the same idea appeared in a watch called the 1853, which added a pierced protective cover. In 1988 the line took the name Landmark.

Expedition editions, 1988 to 1991

The Landmark was tested in public. A version was made for a Swiss Himalayan expedition in 1988, and another for a Dutch team's journey to the North Pole in 1990. The North Pole piece is marked on the dial and turns up with the reference 5811003. A later trekking version carries the name of Manaslu, the Himalayan peak, and a caseback engraved 1991; Japanese descriptions call it a Manaslu summit commemorative model, and its reference is 5817001.

We have not found which expedition the Manaslu dial honours. The house chronology names no 1991 expedition, and the dial does not name a team. Until a period catalogue or a team record settles it, we describe the piece by what is written on it and leave the story open.

Seamark, Trekking, Altimark, Altiland, Greenmark

The family grew quickly. Seamark and Trekking versions arrived in 1992, and a Greenmark for golfers the same year. The most ambitious was the Altimark, which put a small mechanical altimeter under the watch: press the pusher at five o'clock and the altimeter, graduated from 0 to 4,500 metres, appears from beneath the watch. Its launch is also dated to 1989; the house dates the collection to 1992. In 1993 the Altiland let the owner fit either an altimeter or a magnetic compass under the watch.

These are quartz watches, and that is not a weakness here. A walker on a long trek wants a watch that keeps time without winding, and the instrument on the back is the point. An Altimark whose altimeter still moves with the weather is the one to look for.

Airspeed

A pilot line from 1996

Revue Thommen came late to the pilot-watch boom, for a firm that had made cockpit clocks for eighty years. The Airspeed arrived in 1996 as a quartz chronograph. An automatic chronograph followed in 1997 and a version with an altimeter in 1998. The house calls the line one of its most successful icon watches between 2000 and 2010, made in mechanical and quartz versions in many variants.

The Airspeed borrows its look from the instrument panel, and the pointer-date models show the date with a central hand that points to a ring of numbers around the edge. It sits in the same family as the cockpit-inspired watches in our Breitling Navitimer guide and the pilot's watches covered in our guide to IWC pilot's watches, the Portugieser and the Ingenieur. For an even bolder Swiss pilot face from the same years, see our guide to Zeno of Basel.

Two families of reference number

The Airspeed pieces we see fall into two groups. Some carry seven-digit references such as 6110003 or 6110005 for the pointer-date automatics. Others carry a five-digit model number followed by a point and a variant code, such as 16051.6 for a chronograph or 16085.6 for a flyback chronograph with a big date; the same form appears on the Diver line, for example 17030.2, and matches the model numbers the post-2001 licensee uses on its own pages. We read the seven-digit form as the older one, but no published key confirms it, so treat this as a pattern, not a rule.

Calibres

The GT movements

For collectors of mechanical watches the most interesting Revue pieces are the ones with the firm's own movements. In the 1940s the company developed a run of calibres in quick succession, named with the old G.T. initials: GT 44, GT 54, GT 55, GT 56, GT 58 and GT 82. By 1950 it was, in its own words, completely independent, making every part of its movements and watches, and building the tools and machines it needed in its own department for apparatus and machine tools, set up around 1945. Smaller calibres for ladies' watches, GT 12 and GT 14, belong to the same family.

Centenaire, Rotor King, Exactomatic

Three mid-century names are worth knowing. For the firm's hundredth anniversary in 1953 it made a Revue Centenaire, and some of these came with a chronometer certificate. Between 1952 and 1955 the company received only 296 chronometer bulletins from the official testing offices, so a certified Centenaire is a scarce piece. The Rotor King of 1959 took its name from a new automatic calibre with a central rotor; it introduced a logo of two joined letters R, more shaped lugs and the words Rotor King on the dial, in steel, plated and gold cases, with and without date.

The Exactomatic automatic calibre of 1967 launched a crowd of model names: Sea Eagle, Meteor, Grandville and Texan among them. Some of these watches carried the names Sola, an old Thommen brand, or Vulcain instead. On Revue wristwatches from the 1930s to the 1960s the word LUXE on a dial marks a version with a gold case.

Divers, chronographs, skeletons, quartz

The firm came to diving watches late. Its first water-resistant watch with a rotating bezel and black dial dates from 1969, and its first chronograph, also water-resistant with a rotating bezel, from the following year. Skeleton watches, wrist and pocket, followed around 1970 in many versions. From 1984 analogue quartz calibres brought a string of ranges: Buccaneer, Newport, Elysée, Grandville, Nautical and Countach. The Grandville name thus spans both the Exactomatic years and the quartz years, so the calibre, not the dial, tells you which you hold. For the wider story of what quartz did to Swiss houses, see our account of the Seiko Astron, the first quartz watch.

The jumping hour returns

The Springeruhr of 1885 came back twice. The licensee's history puts a first Saltarello collection in 1969. Another version instead dates a jumping-hour watch called GT 1885 to 1991, with the word Saltarello added to the dial in 1992. Both may be right if the name was used twice; we have not seen a dated 1969 example.

Licences and owners after 2000

The end of MSR

The quartz era hit the group hard. The licensee Vulcain et Studio SA failed, the MSR holding was wound up around 2000, and Revue Thommen watch production stopped in 1999. The parent company, by then Revue Thommen AG, chose to concentrate on aircraft instruments, which it supplied to leading civil and military aircraft makers through the 1990s.

Grovana, 2001 to 2014

In January 2001 Christopher Bitterli of Grovana Uhrenfabrik, a watch company in Tenniken in the same canton, bought tools and parts from the old Revue Thommen watch production out of the MSR estate. He signed a licence with Revue Thommen AG for the brand and production rights, reported as a twenty-five-year agreement. Production began in 2002. Grovana developed two lines: the Airspeed pilot watches and classic watches built on the old GT calibres, GT 44, GT 54, GT 55, GT 56 and GT 58, with the ladies' GT 12 and GT 14 made again from 2004. At Baselworld in 2006 it showed a prototype of an all-new manufacture calibre, the GT 60, an automatic with power reserve, small seconds, moon phase and date.

The house says the Grovana licence expired in 2014, well short of twenty-five years. Grovana may still sell watches made and branded before 2014 until its stock runs out, and it stands behind them. Its website still carries Revue Thommen Airspeed and Diver models and states that the trademark belongs to GT Thommen Watch AG.

GT Thommen Watch and Swiss Initiative, 2012 to today

In May 2012 a fourth-generation descendant of Gédéon Thommen, Andreas Thommen, founded GT Thommen Watch AG with partners, and the new company bought the Revue Thommen watch brand. It licensed production and distribution to Swiss Initiative Limited; the relaunch with new models came at Baselworld in March 2015, and the licence ended in 2016. Since July 2016 the brand has been made and sold by GT Thommen Watch alone. In 2021 a family member who calls himself the face of the fifth Thommen generation wrote that he had taken over operational leadership about two years earlier, and in 2022 the company announced Revue Thommen Diver and Airspeed originals, reworked versions of its best models of the previous thirty-five years. Its address today is in Baar, in the canton of Zug.

Licensing a heritage name is common and no reason to avoid a watch, as our guide to Victorinox, Swiss Army and Wenger and our guide to Swiss Military Hanowa show. What matters is which company made the piece in front of you.

The Japan thread

A Tokyo house and a Ginza company

In Japan the brand was sold through Hotta, a watch house founded in Nagoya in 1879 and now based in Tokyo. Hotta says it was the first Japanese watch trading firm to set up an import department, in 1950, and that it brought European watches to Japan early in the post-war years. Alongside it stood Revue Thommen Japan, a limited liability company in Ginza that handled support and repair. That company was dissolved on 2 May 2016, with Hotta's current president as its liquidator, and its register was closed on 4 July 2016. A repair centre run by Hotta at the same Ginza address took over support.

Hotta's import division today names only one brand, the German tool-watch maker Sinn, whose Japanese agency it took in 2009, and its after-service form covers brands it no longer handles. The same house links this guide to our guide to Sinn and its pilot and diving instruments. For an owner in Japan, the practical lesson is that factory service through a Japanese agent cannot be assumed today; a good independent watchmaker is the usual answer, and Ginza remains a good place to start, as our walk through Ginza and its watch houses describes.

Altimeters in the mountains

The Thommen barometric altimeter is as widely known in Japan for climbing as the watches are. That is the deeper Japan thread. We think many Japanese climbers knew the name from an altimeter before they ever saw a Landmark or an Altimark, and the Japanese descriptions of Landmarks we read still praise the sun compass and the expedition story before anything else.

Manaslu, 1956

The mountain on the trekking Landmark has a special place in Japan. Manaslu, at 8,163 metres the eighth-highest peak on earth, was first climbed on 9 May 1956 by Toshio Imanishi and Gyalzen Norbu, members of a twelve-strong Japan Alpine Club expedition led by Yuko Maki; two more climbers reached the top two days later. It was the first eight-thousand-metre summit for Japanese climbers, and the climb became a national event: the equipment the team used, such as lug-soled boots and nylon rope, spread quickly among Japanese mountaineers afterwards. A Japanese women's team reached the top in 1974.

So when a Japanese description calls the 1991 trekking Landmark a Manaslu summit commemorative, a Japanese reader hears 1956 in it, whatever the dial was made to mark. That double meaning helps explain why the model is seen so often in Japan. For why the Japanese market holds pieces like this in such good order, see why Japan is the world's finest market for pre-owned luxury.

A Japanese owner behind the American agent

One more thread runs through New York. Wittnauer, which imported Revue watches into the United States from 1923 and used Revue movements in its early watches, was bought by Longines in 1950 and by Bulova in 2001. Bulova is now owned by Citizen Watch of Tokyo, so the old American agent of Revue now sits inside a Japanese group.

Revue Thommen timeline

What turns up in Japan

Fifty pieces, read in October 2026

In October 2026 we read fifty Revue Thommen pieces offered in Japan. One was a stray strap for another brand; forty-nine were Revue Thommen or Revue watches. Landmarks were the largest group with twelve, including the Manaslu trekking model and the 1990 North Pole edition. Crickets and Airspeeds came next with eleven each. The rest were Seamarks, Grandvilles, an Altimark, skeletons and a few older Revue pieces. Sixteen were quartz, nine automatic and fifteen hand-wound; the rest did not say.

Limited Crickets

Two Cricket variants stand out. A sterling silver Cricket marked as a 1995 limited model appears more than once, with a 925 case, and a Cricket GMT with a white dial is described as limited to 1,400 pieces with reference 7910003. We have not found a house record of either run, so we treat the numbers as the descriptions give them and ask for the papers.

Reading a reference

Seven digits and dotted numbers

Revue Thommen did not publish a key to its references that we could find, but the pieces themselves show a pattern worth knowing.

Treat the right-hand column as a working guess: a reference that does not fit the family on the dial is a question to ask before buying.

Where the records disagree

Five open questions

When Revue replaced G.T. Some give 1908; the house says 1910. We give both.

When the Altimark began. 1989 also appears; the house says 1992. Seamark and Trekking are dated 1992 by the model history, which suggests the house may be dating the family rather than the first watch.

When the Saltarello began. The licensee says 1969; the model history says 1991 under the name GT 1885, with Saltarello on the dial from 1992.

How long the Grovana licence ran. It was reported as a twenty-five-year agreement from 2001; the house says it expired in 2014.

Which generation runs the company. The founder of GT Thommen Watch in 2012 is described as fourth generation; the family member who wrote in 2021 calls himself the face of the fifth. These may be two people, and we have not tried to merge them.

Two claims we leave as lore

The first is that every American president received a Cricket; only the Truman gift comes with a named giver and a presidency we can date. The second is the Revue Sport dropped from an aircraft. The house describes demonstrations in the late 1930s; we have not seen a dated report.

A sceptic's view

Is this a manufacture or a name?

A fair challenge to this brand is that the name has passed through so many hands. The Revue wristwatch was made by Vulcain under licence from the 1960s, then by Grovana, then by Swiss Initiative, and now by a small company in Baar. The aircraft side, which gave the brand its story, is a separate business. Is a modern Revue Thommen really the same thing as a 1950s Revue with a GT calibre?

It is not, and that is fine as long as you know which one you are buying. The 1940s to 1960s Revues with in-house calibres are proper manufacture watches. The 1987 to 1999 Crickets and Landmarks are honest products of a Swiss group under pressure, with real instrument ideas in them. The Grovana pieces, Airspeeds and classic watches on revived GT calibres, are well-made licensed watches. Each is good on its own terms. The mistake is to pay for one story and receive another.

Is the quartz Landmark a serious watch?

Some collectors dismiss quartz pieces from the 1980s and 1990s out of habit. The Landmark and Altimark are worth more thought. They were designed as tools for walkers by a company that made instruments for climbers and pilots, and they carry ideas, a sun compass and a hidden altimeter, that few other watches of the period tried. That is the same spirit as the field watches of Oris, which was born a few kilometres down the same valley in Hölstein.

Checks for collectors

Before you buy

  • Match dial, reference and era. A seven-digit reference on a dotted-number family, or a Cricket dated after 2001, needs an explanation.
  • Run the alarm. Set a Cricket's alarm, let it sound and check that it stops cleanly. A weak note often means the watch needs a service rather than parts.
  • Open the altimeter. On an Altimark, press the pusher at five o'clock and check that the altimeter appears and that its hand moves when the pressure changes.
  • Check the battery compartment. Quartz Landmarks that sat with a dead battery can show corrosion. Ask for a photograph of the movement.
  • Look for the old calibres. On a Revue from the 1940s to 1960s, a GT calibre, a Rotor King rotor or an Exactomatic is the reason to buy. A replacement movement changes the watch.
  • Ask for papers. For a limited Cricket or a commemorative Landmark, the box and certificate carry the edition. Our note on why a full set with box and papers matters explains how much that adds.
  • Read the grade. Japanese condition grades are precise and consistent; our guide to Japanese condition ranks explains each one.

After you buy

Service a mechanical Revue Thommen with an independent watchmaker who knows Swiss calibres; parts for the GT movements are scarce, so ask before the work begins. Keep a quartz Landmark with a fresh battery, or with no battery at all if it will sit. Japanese owners are known for keeping watches boxed and dry, and our guide to how Japan cares for jewellery and watches explains why that matters for a piece like this.

Revue Thommen also sits among neighbours worth reading. Vulcain was a Le Locle house, and Le Locle is home to the makers in our guide to Tissot and our guide to Zenith and the El Primero.

FAQ

Is the watch brand the same company as the aircraft instruments?

They share a history but not an owner. The watch brand belongs to GT Thommen Watch AG; the aircraft business became Thommen Aircraft Equipment AG in 2015, and mechanical instruments under the Thommen name have been made by a separate Swiss company since 2016.

Where was Revue Thommen made?

The firm was founded in Waldenburg, near Basel, in 1853. From the MSR years until 1999 its wristwatches were made under licence by Vulcain in Le Locle, and from 2002 by Grovana in Tenniken.

Is the Revue Thommen Cricket a Vulcain?

It is the same idea, the mechanical alarm wristwatch of 1947, made under the Revue Thommen name from 1987 until production ended in 1999. Since 2001 only Vulcain may use the Cricket name.

What is the Manaslu Landmark?

A trekking version with Manaslu on the dial and 1991 on the caseback, reference 5817001. Japanese descriptions call it a summit commemorative; we have not identified the expedition it honours.

Did Revue Thommen have a Japanese company?

Yes. Revue Thommen Japan, a limited liability company in Ginza, handled support and repair while Hotta sold the watches. It was dissolved in May 2016 and a Hotta repair centre took over support.

Further reading

References

  1. GT Thommen Watch: brief history, chronological milestones
  2. GT Thommen Watch: icon watches (Airspeed, Revue Sport, Cricket, Altimark)
  3. GT Thommen Watch: news (2021 and 2022 posts)
  4. Grovana Watch Co.: Revue Thommen history
  5. Time To Tell: Les montres Revue-Thommen (French)
  6. Revue Thommen (German encyclopaedia entry)
  7. Revue Thommen (English encyclopaedia entry)
  8. Revue Thommen (Japanese encyclopaedia entry)
  9. Thommen Aircraft Equipment
  10. Waldenburg, Switzerland
  11. The Waldenburg railway
  12. Swiss Air Force
  13. EKW C-35
  14. Lockheed F-104 Starfighter
  15. Panavia Tornado
  16. Wittnauer
  17. Altimeter
  18. Reinhold Messner
  19. Manaslu
  20. Manaslu (Japanese encyclopaedia entry)
  21. Hotta Corporation: company history (Japanese)
  22. Hotta Corporation: business, import watch division (Japanese)
  23. Hotta Corporation: company profile (Japanese)
  24. Hotta Corporation: after-service for discontinued brands (Japanese)
  25. Infobird: dissolution of Revue Thommen Japan LLC, from the official gazette of 2 May 2016 (Japanese, May 2016)
  26. Corporate register summary: Revue Thommen Japan LLC, closed 4 July 2016 (Japanese)
  27. Revue Thommen Landmark Trekking Manaslu Expedition 1991 wristwatch (video, 2017)
Retour au blog

Laisser un commentaire

Veuillez noter que les commentaires doivent être approuvés avant d'être publiés.