Bullmark soft vinyl figure of Zarab Seijin, the alien from Ultraman, Showa period

Bandai and Bullmark: Kaiju and Heroes in Vinyl

Six hundred monsters by the afternoon

The company was Marusan, a Tokyo toy house founded in 1923 by the Ishida family and renamed Marusan Shoten in 1947. It was already famous twice over. In 1952 or 1953, accounts differ, it made a tinplate 1951 Cadillac of about 175 parts and about 30 centimetres long, a toy one American collector calls one of the most beautiful toy cars ever made. In 1958 it sold a plastic kit of the submarine Nautilus, modelled on an American kit, and registered a name for the new thing, plamodel, the word Japan still uses for a plastic model kit. In 1964 its Godzilla, as a plastic kit and in tin, was a hit.

So when a planner named Saburo Ishizuki heard in the summer of 1965 that a new monster series, Ultra Q, would begin on television in January 1966, he had reason to think monsters would sell. The trade did not agree. Model kits and toys went through different distributors in those days, and they did not talk to each other. Toy buyers believed that only a television hero or a real vehicle would move, and they found the monsters frightening. Parents, Ishizuki recalled, did not welcome grotesque creatures appearing on the family television at dinner time.

The first five were Gomess, Peguila, Goro, Pagos and Garamon, all from Ultra Q. Ishizuki chose them for their tails and their design, and left out the plainer monsters and the human-shaped alien Kemur Man. Orders were so thin that the normal process was skipped. Soft vinyl is usually cast from production moulds made off a master; this time, six hundred of each were cast straight from the master. Ishizuki told himself that monster kits were selling, so monster figures would too, and privately expected to lose his job. The six hundred were delivered in a morning. The telephone rang in the afternoon.

That first run left a mark collectors still look for. Because the master moulds were used once and then replaced, Marusan's later recollection was that the tail-moving Gomess and Garamon exist only in those six hundred. Every mould made after the master shrinks by a few per cent, so each generation of a figure is a little smaller than the one before.

Bullmark soft vinyl figure of Zarab Seijin, the alien from Ultraman, Showa period
Bullmark Zarab Seijin, soft vinyl, Showa period. Japonista photograph. Look closer: the rounded, friendly sculpting is the house style that began with Marusan's first monsters; Zarab is an alien from the first Ultraman series.

Our Bullmark Zarab Seijin carries that soft, rounded line into the next decade. The short history of the medium itself, from Marusan to today's small independent makers, is told in our guide to kaiju in soft vinyl.

A modeller of ceramic animals

The face of the Japanese kaiju toy was set by a man who had never sculpted a monster. Ishizuki thought the professional sculptors of the day too realistic for soft vinyl. Then, buying stock at a factory, he saw animal figures in soft vinyl being made in huge numbers, plain but irresistibly sweet. They were the work of Takeshi Kawamoto, a modeller from Nagoya who made ceramic figures and had a gift for soft forms.

Ishizuki showed him the monster designs and gave three instructions: do not stray too far from the design, add more detail than the animals had, and, because monsters frighten, make them as cute as possible. Everything else was left to Kawamoto. The first prototype, Ishizuki remembered, was fat and had a tail, so it was probably Gomess or Pagos. After two or three corrections Kawamoto had the measure of the job, and the requests stopped.

The size came from retail memory. Monsters are big, so the toy should be big; and large cloth dolls had sold well for Ishizuki before, so big meant sales. The result was the standard height of about 23 centimetres that kaiju soft vinyl still keeps. The clay original was larger, and every step, clay to wax to master mould to working mould, made it smaller. The first sample looked too big for a child, but the legs were easy to hold, and that settled it.

Money that scatters

The monsters sold, and Marusan still went under. In 1965, the year before the first figures, the company had put heavy money into slot racing, the craze for racing model cars on big tracks in town shops. The boom died quickly, partly because the shops came to be seen as unsuitable places for children, and the moulds and stock were never paid off. Ultra Q and Ultraman figures followed in 1966, then Booska, Ultraseven and Captain Ultra in 1967, and it was not enough.

In 1967 the company changed its name. A name reader pointed out that the characters of Marusan could be read as money that scatters, and the firm became Maruzan, written to mean money that stays. It did not help. When Ultraseven ended its run the first monster boom ended with it, and Maruzan went bankrupt in December 1968. The family restarted the company in 1969, almost from nothing, but the main licence for Ultra monster soft vinyl went elsewhere.

It went to Bullmark. Ishizuki left Maruzan on 20 December 1968, and within four months he and two partners had a company of their own. Our Bullmark Captain Ultra wind-up in blue is a reminder that the hero Marusan had licensed in 1967 travelled with the people who made him.

A bull on the sole

Bullmark was founded on 4 April 1969 by three former Marusan men: Kotaro Ishida, nephew of the Marusan president, Saburo Ishizuki and Yutaka Shibata. The name was chosen for strength: a bull. Then the founders consulted a fortune-teller who had advised them since the Marusan days, and changed the spelling to give the written name a luckier number of strokes. The bull logo was stamped on the sole of every figure, which is why, decades later, a collector turns a monster upside down before anything else.

The new company began with tin trains and cars, not monsters. The boom was over, Marusan's monster figures were being cleared out of the shops, and character toys looked like a risk. The monsters came back through a family accident: when reruns of Ultraman and Ultraseven began, Ishizuki's nephews were hooked, and they played with their old Marusan monsters again. A little research showed that many children were doing the same. The old Marusan moulds, meanwhile, had been seized by a factory against unpaid debts. Bullmark put them back in order, signed a licence with Tsuburaya, and from the summer of 1969 about twelve monsters were back in production.

The moulds explain why a Bullmark figure can look so much like a Marusan one. They are, in a real sense, the same toy in a second life, often in new colours and with the new mark underfoot. Bullmark also hired a wider bench of sculptors. Akira Masuda sculpted the heroes and the science patrol members; Futami Ichikawa sculpted figures of the 1970s; and Yoshio Miyata sculpted the outsized shop-display Jirass.

The tin trade never left the house. Our Bullmark walking Jirass is battery-powered and wired to a hand controller, and our Bullmark Godzilla in tin walks with a light and smoke. They are the hybrid creatures of a company that grew up in tinplate and found its fame in vinyl.

Bullmark battery-operated remote-control walking tin kaiju Jirass
Bullmark walking Jirass, battery-operated tin with a wired controller. Japonista photograph. Look closer: Jirass is the frill-collared dinosaur of the first Ultraman series, and Bullmark stood a life-size Jirass at toy shop doors in 1970.

The toy house that brought a show back

In 1970 there was no new Ultra series on the air. There was Ultra Fight, a short monster programme that began on TBS on 28 September 1970, and there were reruns of the earlier shows in many regions. Bullmark sent its salesmen wherever the reruns played. It packed a photographic catalogue the size of a newspaper sheet into its bags, so that a child could point at the monster he wanted next. Grandparents sent to the shop by their grandchildren found it easy to use; so did the trade buyers. The company stood life-size Jirass and Eleking figures in front of toy shops and ran promotions for the programme.

Then Bullmark took its own numbers to the producers. Ishizuki's market research and the company's sales became a pitch to Tsuburaya Productions and the broadcaster TBS for a new Ultra series; he even made the case to the drug company that had sponsored the earlier shows. The result was Return of Ultraman, which began in 1971 and opened what Japan calls the second monster boom.

The toys changed the monsters, too. Ishizuki's line was blunt: what we make is a toy, not a monster. The rule of the house was that a figure should be easy for a child to pick up and play with before it was true to the screen. Long tails eat material, so on the drawing board some tails got shorter. That is the hidden hand of the toy maker in the design of a television creature.

The heroes multiplied as the boom went on. Our Bullmark Ultraman Ace with removable mask, 32.5 centimetres tall and still on its header card, and our Bullmark Zoffy with removable mask show the bigger hero figures of the period, where a child could pull off the helmet and find the face beneath. The full cast of costumed champions is gathered in our guide to tokusatsu heroes.

Green is a hard colour

Bullmark's fall began with a colour. In December 1971 a new hero, Mirrorman, came to television. Toys of the day were red, blue and yellow, and Mirrorman was green. Nervous, Ishizuki set the first run of the figure at 36,000, small for the time, and went to the United States over the New Year holiday to study the market there.

It backfired twice. The first run sold out at once, and with daily calls reaching him abroad, Bullmark ordered more. Into the gap came unlicensed copies of the figure. Chasing them around the country, Ishizuki asked children what they thought of Mirrorman and did not like the answers. He stopped production, too late, and the extra figures became stock that would not move.

That same year Bullmark completed a new headquarters. Ishizuki suggested using the top floors as flats to earn rent; the idea was turned down, and the money instead made Bullmark the sole sponsor of Tsuburaya's Triple Fighter in 1972, at a time when even large companies rarely sponsored a show alone. The show aired five times a week in ten-minute episodes, which cost more to make than a weekly half hour. Ultraman Ace, Taro and Leo followed, but the oil shock of 1973 put Japan into recession and toys slowed.

Bullmark Mirrorman tinplate wind-up walking figure with original box
Bullmark Mirrorman, tinplate wind-up with its box, early 1970s. Japonista photograph. Look closer: the silver and green hero who broke the primary-colour rule of toy shops, and whose overstock helped sink his maker.

There was competition, too. In 1973 a Bandai company called Popy launched die-cast metal robots under the name Chogokin, and Bullmark answered with its own Z-Gokin line. A Mechagodzilla in 1974 was a hit, and Ishizuki later felt that monster figures made for Hawaii and the robot Dai Apolon gave the company chances to recover. But sponsored shows such as Robokko Beeton in 1976 and Mechander Robo in 1977 sold below hope, and Bullmark closed in October 1977. Little Superman Ganbaron, the show it led as main sponsor, was cut short with its broadcast of 24 December. Our boxed Bullmark Mirrorman wind-up is a piece of that hard lesson in tin.

Bandaiya at Kikuyabashi

The other house was born in the same streets. Bandaiya was founded in July 1950 at Kikuyabashi in Asakusa, Tokyo, by Naoharu Yamashina, selling celluloid toys, tin cars and rubber swimming rings. Its first original product, in September 1950, was the Rhythm Ball. Exports began in March 1951, and in April 1951 came the first original Bandai metal toy, a B-26.

What set the company apart early was a promise. In July 1953 it set up a department to inspect every product. In November 1955 it introduced a product guarantee, which it describes as an industry first, with a model of the 1956 Toyopet Crown. In July 1958 its first television advertisement told children that a red box meant a guaranteed toy. In July 1959 it launched a series of metal cars from around the world, and in July 1961 the company became Bandai.

Collectors abroad remember the Crown for another reason. Japan's toy industry of the 1950s built American cars for export: long Cadillacs and Chevrolets for the United States, the biggest market. The Toyopet Crown, a Japanese car for Japanese children, made Bandai's name in domestic tin, and tin models of Japanese cars are now harder to find than the export giants. Much of that industry ran on piecework: women assembled parts at home and brought them to a factory for final assembly.

The character business began in 1963, when Astro Boy became Bandai's first toy based on a television character. A remote-control Astro Boy followed in 1964 and stands today in the company's museum. The age of the screen hero was under way, and Bandai would spend the next twenty years learning to read the broadcast schedule, as Bullmark soon would too.

Tin on our rail

Our rail holds the early Bandai in some depth. The Bandaiya Packard 1918 tin friction car carries the old company name of the 1950s. The Bandai Volkswagen Type 2 friction truck and the Bandai Ferrari Superamerica with its box belong to the cars-of-the-world years, when Bandai pressed the world's traffic in lithographed tin.

Bandaiya Packard 1918 tinplate friction car from the 1950s
Bandaiya Packard 1918, tinplate friction car, 1950s. Japonista photograph. Look closer: the Bandaiya name dates the toy to the years before 1961, when the company was still the shop founded at Kikuyabashi.

The space age is there as well. Our Bandai Space Patrol battery vehicle rolls on caterpillar treads, and our Bandai Tetsujin 28 Sky Rocket is a lithographed support jet from the world of Japan's first giant robot, whose tin history is told in our Tetsujin 28-go guide. Tokyo's tin robot makers, Horikawa among them, have a feature of their own, and the broader story of Showa tin and vinyl is in our Showa toy guide.

Two more Bandai facts belong here. In January 1964 a remote-control toy car became a major hit, and in 1966 Crazy Foam sold 2.4 million units in three months on the back of a television campaign. Bandai was learning, in the same years that Ultra Q made the point for monsters, that a toy and a broadcast could sell each other.

A robot every February

In July 1971 Bandai founded Popy as a specialist maker of character toys, and Popy, not Bandai, made the die-cast Chogokin robots and the giant Jumbo Machinder that defined the 1970s. That story is told in full in our feature on Popy. Here the thread to follow is the costumed team. Bandai's company history dates its Super Sentai merchandise to 1975, the year the first team show began.

The giant robot came four years later. Battle Fever J, which began on 3 February 1979, gave the team its first robot, Battle Fever Robo, a samurai figure with a crest like a warrior's helmet, carried into battle inside a flying ship, the Battle Shark. It did not transform. Every year after it added a trick, and the toys sold each trick.

In March 1983 Bandai absorbed Popy and six other group companies in one merger, and from then on the robots carried the Bandai name. Our rail follows the late 1980s and early 1990s closely. Hikari Sentai Maskman began on 28 February 1987; our boxed DX Chogokin Great Five is its robot. Liveman began on 27 February 1988; we hold the unused DX Live Robo and the DX Live Boxer with its stickers unapplied, the two halves of Super Live Robo.

Bandai DX Chogokin Great Five robot from Hikari Sentai Maskman, boxed
Bandai DX Chogokin Great Five, Hikari Sentai Maskman, 1987. Japonista photograph. Look closer: the Chogokin name Popy coined in the 1970s survives on the box of a Bandai robot, four years after Popy itself was merged away.

Fiveman began on 2 March 1990, the one show here that missed February, and our DX Max Magma base comes with its video. Jetman began on 15 February 1991; our unused DX Jet Icarus is its sky-combining robot. Zyuranger began on 21 February 1992, and our Six Guardian Beasts set is the toy of the show that crossed the Pacific.

That crossing is its own surprise. An American producer, Haim Saban, had fallen for the format after seeing Bioman in 1985. He did not want to dub Zyuranger. He wanted its fight footage, from all fifty episodes, to build a new American series around it, and the result, in 1993, was Mighty Morphin Power Rangers. The Zyuranger suits became the first Power Rangers costumes, and the Dragon Ranger's suit became the Green Ranger's.

1983, the realist turn

While Bandai absorbed Popy, the monster toy changed shape. A generation who had watched the first Ultra shows as children were now adults, and they wanted monsters that looked like the screen, not the friendly Kawamoto originals. Amateur sculptors met them with resin garage kits, sold in small numbers from model shops such as Kaiyodo's in Kadoma, Osaka.

Bandai answered in two steps. In February 1983 the Real Hobby series, made under Bandai's Popy name, opened with Baltan Seijin, a large unpainted figure with wire inside the arms and legs and, in the deluxe version, light-up eyes; the buyer painted it, like a kit. Then, in the autumn of 1983, came the Ultra Kaiju Series: 28 monsters and aliens from Ultraman and Ultraseven, plus Ultraman and Ultraseven themselves, sculpted with garage-kit realism. At about the same time Bandai released a Godzilla of more than 20 centimetres whose original was sculpted by Hitoshi Hayami, one of the garage-kit stars, and made his name part of the pitch.

The timing came from television. The first figures were timed to a summer 1983 rerun of Ultraseven, so the Ultraseven monsters came first. The heroes were sold boxed with a card; the monsters were sold loose, with the card tied on as a tag, first in plastic and later in paper. For the garage-kit crowd, some monsters were also made in plain white vinyl to be painted at home.

That line became the backbone of every toy shop's Ultra aisle. A hero line split off in 1986, and both ran until 2013, when Bandai rebuilt them as the 500 series. The friendly Marusan face and the realist Bandai face still sit side by side in Japan's toy culture, and our rail holds both.

Giants at the shop door

Bullmark's life-size Jirass and Eleking stood at shop doors in 1970 to sell a television show. Bandai inherited the idea and made the shop-door giant a craft. Our Ultraman display figure of 1996 stands 150 centimetres, made under Tsuburaya's licence for promotion. Our Astro Boy statue in fibreglass, also 150 centimetres, raises one arm as he does on screen and has a panel that opens in his chest.

Astro Boy 150 cm fibreglass display statue with raised arm, Bandai
Astro Boy display statue, fibreglass, 150 cm. Japonista photograph. Look closer: the boy robot was Bandai's first television character toy, in 1963; the opening chest panel echoes the machinery inside him.

The girls' heroes had their giants too. Sailor Moon arrived at Bandai in 1993, and our Sailor Moon jumbo figure of 1993, made in Japan, is a display piece from the first broadcast years. The biggest hobby giants are the HY2M models of the 2000s: our unopened HY2M 1/12 RX-78-2 Gundam stands 1.5 metres when built. Bandai's Gundam kits, first sold at 1/144 scale in 1980, passed 100 million units in October 1984, and our Gundam collection holds the line.

The museum shows where all of this ended up. Bandai built a toy manufacturing complex in Mibu, Tochigi, in a district now called Omocha no Machi, Toy Town, and opened the Bandai Museum there in 2007. Its galleries hold Japanese toys, about 7,000 world toys inherited from a London toy museum, an Edison collection and a life-size Gundam bust. One of its oldest pieces is an English wooden doll of the mid-eighteenth century.

Cards at the turn of a lever

In April 1977 Bandai began selling capsule toys from vending machines, and in July 1988 it applied the same idea to cards. Carddass began as a vending machine: put in a coin, turn the lever, and one card comes out. The first series was Saint Seiya. SD Gundam followed and became the line's great hit, and by March 2012 Carddass had sold more than ten billion cards.

The cards crossed into the 1990s with Pokémon. Our Porygon Carddass card of 1996 comes from that run, a Bandai vending card from 1996, the year Pokémon began in Japan. It is a long way from a six-hundred-piece soft vinyl Gomess, and yet it is the same idea: a character, a child and a small object that makes the screen something to hold.

The bull returns

Ishizuki did not leave the trade when Bullmark closed. He went to a company called Ark in 1978 and to Marukoshi in 1983, and Ark used Bullmark's sculptors for the monsters of shows such as Zone Fighter, Silver Kamen and Iron King. In the 1990s the old figures returned as reissues, Bandai's among them, and from 1997 a reissue programme used painted colour samples by Yuji Nishimura of M1go.

Then the bull itself came back. Ishizuki's own account dates the new Bullmark company to 2007; other records give a new company in 2008 and mail order from 2009. Today the name is run within the Hyakumedo group, and the new figures are cast in the old way, with the old colours of 1970s catalogues reissued on new figures. The man who chose Gomess for his tail in 1965 was still choosing monsters half a century later.

That continuity is the strongest thread in this story. The same moulds passed from Marusan to Bullmark; the same face, Kawamoto's cute monster, passed to the revival; the same promise of the guaranteed toy runs from Bandai's 1955 Toyopet Crown to the robots on our rail.

A factory film about Bullmark soft vinyl, from pouring the liquid vinyl into the moulds to painting and packing the finished monster.

Reading a Bullmark or a Bandai

A toy from either house tells you a good deal if you know where to look. Start underneath. A Bullmark figure should carry the bull on the sole of its foot. The first Marusan Godzilla is known among collectors for a sharply angled tail and no mark underfoot at all. Then the colour: Bullmark often recast Marusan moulds in new colours, so the shape alone does not date a figure. Then the box, the header card or the tag, which often carries the series name and the year of the show.

For Bandai, the name on the box dates the toy: Bandaiya before July 1961, Bandai after, Popy on character toys between 1971 and 1983. For the Sentai robots, the year of the show is the year of the toy, which is the whole point of the February calendar. Condition terms on our pages follow our collector guides, and the full toy map of Japan is laid out in our Japanese toys almanac.

On our rail

Every piece named here can be held. The Bullmark tin and soft vinyl, the Bandai cars and the Sentai robots live in our Japanese toys and collectibles; the older tin sits with our vintage and antiques; the toys that crossed the Pacific, Power Rangers above all, are in our cross-cultural toys; and the display giants and Gundam models of the 2000s are in our 2000s pop culture collection. Play as a part of everyday Japanese life, from wooden dolls to vending cards, is the subject of our play and living almanac.

The two houses make one argument together. Bullmark showed that a monster could be a toy and a toy could bring a monster back to the screen. Bandai showed that the screen could be read like a calendar, with a new robot every February and a new monster line whenever a rerun came round. The great Showa kaiju figure, for many collectors, is not a single toy but the moment Kawamoto's cute Gomess became a habit. That is our reading.

With care from Tokyo,
The Japonista Curation and Concierge Team

Where the record differs

What we checked and left out

  • We give no prices or values for any toy, past or present, and no sale figures for either company beyond those Bandai publishes.
  • Accounts disagree on which monster Kawamoto sculpted first; we give Ishizuki's own guess, Gomess or Pagos, and no more.
  • One account says unlicensed Ultraman figures were made on farms in Iwate; we could not confirm it, so we leave it out.
  • Our product page for the walking tin monster names both Jirass and Giras, two different monsters; we call it Jirass, the name on the toy's design, and have logged the page for review.
  • We could not confirm which Bandai factory made any single figure on our rail, so we name none.

Answered plainly

What is the difference between Marusan and Bullmark?

Marusan made the first Ultra monster soft vinyl in 1966 and went bankrupt in 1968. Bullmark was founded in 1969 by former Marusan staff, recovered many of the old moulds and became the main maker of Ultra monster soft vinyl until it closed in 1977.

How do I tell a Bullmark figure from a Marusan one?

Look at the sole. Bullmark stamped its bull mark under the foot. Many Bullmark figures came from Marusan moulds, so the shape can match and the colour and the mark tell them apart.

Did Bandai make the Chogokin robots?

The first ones were made by Popy, a Bandai company founded in 1971. Bandai absorbed Popy in March 1983, and later Chogokin robots carry the Bandai name.

Why do Sentai shows start in February?

Most of the shows of this period began in late February or early March, and the robot toys followed the show. Fiveman, which began on 2 March 1990, is the near exception.

What is kaiju soft vinyl called in Japan?

Sofubi, short for soft vinyl. The standard monster size of about 23 centimetres dates from Marusan's first figures.

Where next

Further reading

  • Saburo Ishizuki, interviewed for Bullmark's forty-fifth anniversary, sofvi.tokyo, 2015, for the first monsters and the rise and fall of Bullmark in the founder's own words.
  • "Marusan and soft vinyl", Mynavi News, 2008, for slush moulding, the slot-racing debt and the licence passing to Bullmark.
  • Bandai Namco Group Fact Book 2024, history pages, for the Bandai dates from Bandaiya to the Popy merger.
  • Hideo Akita, on the tokusatsu boom of 1983, Mynavi News, 2023, for the realist turn and the Ultra Kaiju Series.
  • Philippe de Lespinay, interviewed by Collectors Weekly, 2010, for Japanese tin cars and the Toyopet Crown.
  • "The secret origins of the Japanese superhero show that became Power Rangers", Gizmodo, for Saban and Zyuranger.

References

Retour au blog

Laisser un commentaire

Veuillez noter que les commentaires doivent être approuvés avant d'être publiés.