Ring Size Conversion: Japanese Numbers, Letters, Diameters and Fit
Home › Size guides › Rings
A ring size describes the inside of the ring. Japan numbers it from 1, at 13.0 mm inner diameter, adding one third of a millimetre per number; the US adds about 0.8 mm per size; the UK uses letters; Europe uses the circumference in millimetres. Japanese 14 is 17.33 mm: a US 7, a UK N½ and an EU 54.
| Japan | Numbers from 1: 13.0 mm, plus ⅓ mm each |
|---|---|
| US and Canada | Diameter in inches = 0.458 + 0.032 × size |
| UK and Australia | Letters A to Z, 1.25 mm circumference each |
| Europe | Circumference in mm, rounded |
| Wide bands | Half to two Japanese numbers up |
| How we list | The marked size, and the inner diameter where measured |
Ring size chart: Japan 1 to 28 with US, UK and EU
Read along from the Japanese number to the inner diameter, the circumference and the nearest US, UK and EU sizes. Japanese 9 is 15.67 mm, a US 5; Japanese 13 is 17.0 mm, a US 6.5; Japanese 18 is 18.67 mm, about a US 8.75; Japanese 22 is 20.0 mm, about a US 10.25.
| Japan | Inner diameter, mm | Circumference, mm | US, nearest ¼ | UK, nearest ½ | EU |
|---|---|---|---|---|---|
| 1 | 13.00 | 40.8 | 1.75 | C½ | 41 |
| 2 | 13.33 | 41.9 | 2 | D½ | 42 |
| 3 | 13.67 | 42.9 | 2.5 | E½ | 43 |
| 4 | 14.00 | 44.0 | 3 | F | 44 |
| 5 | 14.33 | 45.0 | 3.25 | G | 45 |
| 6 | 14.67 | 46.1 | 3.75 | H | 46 |
| 7 | 15.00 | 47.1 | 4.25 | H½ | 47 |
| 8 | 15.33 | 48.2 | 4.5 | I½ | 48 |
| 9 | 15.67 | 49.2 | 5 | J½ | 49 |
| 10 | 16.00 | 50.3 | 5.25 | K | 50 |
| 11 | 16.33 | 51.3 | 5.75 | L | 51 |
| 12 | 16.67 | 52.4 | 6.25 | M | 52 |
| 13 | 17.00 | 53.4 | 6.5 | M½ | 53 |
| 14 | 17.33 | 54.5 | 7 | N½ | 54 |
| 15 | 17.67 | 55.5 | 7.5 | O½ | 56 |
| 16 | 18.00 | 56.5 | 7.75 | P | 57 |
| 17 | 18.33 | 57.6 | 8.25 | Q | 58 |
| 18 | 18.67 | 58.6 | 8.75 | R | 59 |
| 19 | 19.00 | 59.7 | 9 | S | 60 |
| 20 | 19.33 | 60.7 | 9.5 | S½ | 61 |
| 21 | 19.67 | 61.8 | 10 | T½ | 62 |
| 22 | 20.00 | 62.8 | 10.25 | U½ | 63 |
| 23 | 20.33 | 63.9 | 10.75 | V | 64 |
| 24 | 20.67 | 64.9 | 11 | W | 65 |
| 25 | 21.00 | 66.0 | 11.5 | X | 66 |
| 26 | 21.33 | 67.0 | 12 | X½ | 67 |
| 27 | 21.67 | 68.1 | 12.25 | Y½ | 68 |
| 28 | 22.00 | 69.1 | 12.75 | Z½ | 69 |
TL;DR
Two and a half Japanese numbers make about one US size. Japanese 14 is the elegant anchor: US 7, UK N½, EU 54.
The US and UK columns are rounded to the nearest quarter size and half letter, which is how jewellers stock them. Some charts round differently, by as much as half a size, so the millimetre figures are the ones to trust. That is our reading.
See also: our reference table of Japanese ring sizes · rings, by size
Japanese ring numbers: one third of a millimetre at a time
Japan's ring sizes, set out in the national standard JIS S 4700, begin at number 1 with an inner diameter of 13.0 mm and add one third of a millimetre for each number. Number 22 is therefore exactly 20.0 mm. The fine step makes Japanese sizing one of the most precise in everyday use.
The precision has a practical consequence: a Japanese jeweller can fit a ring to a third of a millimetre where an American chart offers a step of about 0.8 mm and a British letter about 0.4 mm of diameter. When you see gōsū, the word for ring number, on a Japanese product page, read it as diameter.
A correction to the common story: Japanese numbers are not the circumference in millimetres. Number 14, for instance, measures about 54.5 mm round; the number is a step on a ladder, not a measurement. That is our reading.
See also: Tasaki and Japanese fine jewellery · Japanese gold and platinum hallmarks
Letters, numbers and millimetres: how each system works
The British letter scale under BS 6820 starts at A, a 37.5 mm circumference, and adds 1.25 mm per letter. Europe, under ISO 8653, simply quotes circumference in millimetres. Switzerland subtracts 40 from it. The US uses an inch-based diameter: 0.458 plus 0.032 inches per size.
Older British charts follow a 1945 standard built on diameter in sixty-fourths of an inch, and the 1987 revision recalibrated the letters, so a vintage C and a modern C can differ. US charts, for their part, disagree among themselves by up to half a size.
All of this is why a jeweller who measures in millimetres will never mislead you. That is our reading.
See also: the Chrome Hearts silver guide · the necklace length chart
How to measure your ring size at home
Measure a ring that already fits: lay it on a ruler and read the inside diameter in millimetres. Or wrap a thin, non-stretch string round the base of the finger, mark the overlap and measure the length for circumference. Measure three times, in the afternoon, and use the middle reading.
- Use thin, non-stretch string or a paper strip about 5 mm wide.
- Wrap it snugly round the base of the finger, checking it passes the knuckle.
- Mark where the string meets itself.
- Lay it flat against a ruler and read the circumference in millimetres.
- Find the nearest figure in the chart; choose the larger if between two.
String stretches and paper creases, so a measured ring is always the better reference, and a jeweller's sizing ring better still. That is our reading.
See also: swelling and seasons · how Japonista works
Wide bands and comfort fit: why width changes the size
A wide band touches more of the finger, so it feels tighter at the same diameter. Japanese jewellers suggest half a number to one number larger for bands over about 3 mm, and one to two numbers larger at 5 mm and above. Comfort-fit bands, rounded inside, may need a little less.
A 6 mm silver spacer ring and a 3 mm one in the same number will not feel alike, and the difference is roughly one Japanese number. Comfort-fit wedding bands divide opinion: some wearers find them a half size looser, others no different, which is why we suggest trying a band of similar width before deciding. That is our reading.
See also: silver jewellery · Chrome Hearts
Swelling, seasons and knuckles: a ring through the year
Fingers are smaller on cold mornings and larger on warm evenings, after exercise and after salty meals. Measure in the afternoon at ordinary room temperature. If the knuckle is noticeably wider than the base of the finger, size for the knuckle so that the ring can pass over it.
A ring that is perfect in January may be tight in August. If you sit between two sizes, the larger will be the kinder choice through the seasons; a slim sizing bar can be fitted later, whereas a ring that will not pass the knuckle cannot be worn at all. That is our reading.
See also: gold in Japan · Japanese gold jewellery
The thread: a ring as a gift, without asking
The question, as it so often reaches our desk
"I would like to give a silver ring as a surprise. I have borrowed one of her rings for an evening. What should I measure, and how close is close enough?"
Japonista editorial · the measuring view
Measure the inside diameter across the widest point, twice, at right angles. 16.5 to 17.0 mm, for instance, places her at Japanese 12 or 13, about a US 6.25 to 6.5.
Japonista editorial · the jeweller's view
Note which finger the borrowed ring is worn on, and its width. A slim ring from the little finger tells you little about a wide band for the ring finger.
Japonista editorial · the concierge view
Send us the measurement before you decide. We will match it to the marked size and, where we can, to the measured inside of the ring.
TL;DR
Inside diameter in millimetres, the finger it is worn on, and its width: those three facts make a confident gift.
The rest is a matter of taste, which is the pleasant part. That is our reading.
See also: real questions, answered · all jewellery
From the archive: rings by Japanese number
Each ring below carries its marked Japanese size, from 8 to 18; the chart above converts each one.
Chrome Hearts 3mm Spacer Plain Ring with Engraved Rim, Sterling Silver, Japanese Size 8
Chrome Hearts 6mm Spacer Ring with Intellectual Gallery Engraving, Sterling Silver, Japanese Size 9
Chrome Hearts PPO Silicone Gem Ring with Scroll Lettering, Pink, Japanese Size 12
Chrome Hearts 3mm Spacer Plain Ring with Engraved Rim, Sterling Silver, Japanese Size 14
Chrome Hearts Heart Ring in White Plastic with Floral Relief, Japanese Size 17, with Pouch
Chrome Hearts 6mm Spacer Plain Ring, Sterling Silver, Japanese Size 18
Silver rings sit naturally beside our Amekaji collection. That is our reading.
Where the record differs
| Question | One view | Another view | What we print |
|---|---|---|---|
| US size for Japanese 16 | About US 8, a Japanese jeweller | US 7.75 by formula | 7.75, with 8 as the common stock size |
| Wide-band allowance | Half to one number over 3 mm | One to two numbers at 5 mm and over | Both, by width |
| British letter scale | Diameter in sixty-fourths of an inch, 1945 | Circumference from 37.5 mm, 1987 | The 1987 scale |
Real questions, straight answers
What is Japanese ring size 13 in US?
Japanese ring size 13 is about a US 6.5. Its inner diameter is 17.0 mm and its circumference about 53.4 mm, which is a UK M½ and an EU 53.
Japanese numbers rise by one third of a millimetre in diameter, while US sizes rise by about 0.8 mm, so roughly every two and a half Japanese numbers make one US size. A scenario: you wear a US 7 and admire a ring marked 14. At 17.33 mm, it is your size exactly.
Answered by the Japonista Curation and Concierge Team
What is ring size 10 in mm?
A US ring size 10 has an inner diameter of about 19.8 mm and a circumference of about 62.1 mm. That is close to a Japanese 21, a UK T½ and an EU 62.
The US formula is simple: diameter in inches equals 0.458 plus 0.032 times the size. Different charts round slightly differently, so treat the last decimal with courtesy rather than certainty.
Answered by the Japonista Curation and Concierge Team
How do I convert US ring size to Japanese?
Multiply the US size by 0.032, add 0.458, and multiply by 25.4 for the inner diameter in millimetres. Then subtract 13, multiply by 3 and add 1 for the Japanese number.
US 6 becomes 16.3 mm and Japanese 11 or 12; US 8 becomes 18.1 mm, a Japanese 16. Or simply read the table above, which does the arithmetic for every Japanese number from 1 to 28.
Answered by the Japonista Curation and Concierge Team
How can I measure my ring size at home with string?
Wrap a thin, non-stretch string or paper strip round the base of the finger, mark where it meets, and measure the length in millimetres. That is your circumference; find the nearest figure in the chart.
Make sure it will pass over the knuckle, which is often the widest point. Measure at the end of the day and at a comfortable room temperature, three times, and take the middle reading. A ring you already wear, measured across its inside, is more reliable still.
Answered by the Japonista Curation and Concierge Team
Why is my ring tight in the morning or in summer?
Fingers change size with temperature, time of day, salt and exercise. Warm weather and evening swelling make rings tighter; cold mornings make them looser.
Japanese jewellers note that fingers change through the day and with the seasons, and suggest the larger size if you sit between two. A ring that slides over the knuckle with gentle resistance and sits without spinning is the right one.
Answered by the Japonista Curation and Concierge Team
Should I size up for a wide band?
Yes, usually. Japanese jewellers suggest half a number to one number larger for bands over about 3 mm wide, and one to two numbers larger at 5 mm and wider.
Wide bands cover more of the finger and grip more skin, so they feel tighter at the same diameter. A comfort-fit interior, rounded inside, can reduce the effect a little.
Answered by the Japonista Curation and Concierge Team
Are UK and Australian ring sizes the same?
Broadly, yes. Both use the British letter scale, A to Z, in which each letter adds 1.25 mm of circumference, starting from 37.5 mm at A under the current British standard.
Older British charts derived from a 1945 standard measured diameter in steps of one sixty-fourth of an inch, so a vintage letter can differ from a modern one by about half a size.
Answered by the Japonista Curation and Concierge Team
Ask us a sizing question. We would be delighted to help. Share the label, the measurements you have and the piece you are admiring through our contact page, and our team in Tokyo will reply personally, with measured numbers rather than guesses.
Glossary
- Inner diameter
- The distance across the inside of the ring.
- Circumference
- The distance round the inside; the European size.
- Gōsū
- Japanese for ring number.
- Mandrel
- The tapered rod used to size rings.
- Comfort fit
- A band rounded on the inside.
- Sizing bar
- A small insert that makes a ring slightly smaller.
Where next
- Up: the size conversion hub
- Across: the necklace length chart
- Bridge: the Chrome Hearts silver guide
- Down: every ring, by size
References
- JIS S 4700:2022, Ring size (Japanese)
- Luft, ring size conversion and measuring advice (Japanese)
- Oddjobby, ring size converter: BS 6820, ISO 8653 and US
- Ringsizes.biz, UK ring sizes and British standards
- Edgar Lowen, ring size history and charts
- H. S. Walsh, Wheatsheaf ring size table
- QVC Japan, printable ring size guide (Japanese)
- Yuzen, ring size chart and wide-band advice (Japanese)
- Mesurix, wide-band ring sizing (Japanese)
- Ringsizely, how ring sizes are calculated (Japanese)
- Niwaka, ring size guide
- r/jewelry, comfort-fit wedding band sizing
Last updated: 1 November 2026. Cite this page: The Japonista Curation and Concierge Team, "Ring Size Conversion: Japanese Numbers, Letters, Diameters and Fit", Japonista, updated 1 November 2026, https://japonista.com/ring-size-chart-us-uk-eu-japan
Searching for a particular ring in your size? Our Hunting Salon™ will look for it across Japan, and otoriyose, ordering from afar, explains how it reaches you.
With care from Tokyo,
The Japonista Curation and Concierge Team
Private concierge
Looking for something in particular?
Describe the piece or the project you have in mind. A senior advisor in Tokyo reads every case file personally and replies within two business days, with fees set out in writing before any work begins.