Ōtsuka Lōtec: Jiro Katayama's Instrument Watches
The Japonista Curation and Concierge Team
In November 2024 the jury of the Grand Prix d'Horlogerie de Genève gave its Challenge prize, for watches priced at no more than 3,000 Swiss francs, to a steel watch with its hours and minutes spread across a fan like the needle of an old gauge. It was the Ōtsuka Lōtec No. 6, made in a workshop in Tokyo by Jiro Katayama, who had come to watches from car design rather than from a watchmaking school. The same month, Japan's Ministry of Health, Labour and Welfare named him a Contemporary Master Craftsman.
Katayama's watches look like instruments because that is what he set out to make. Ōtsuka Lōtec stands among the makers of Japan's independent horology, and the houses around it are mapped in the watch almanac.
A lathe on the kitchen counter
Katayama studied design, drew cars, and then worked freelance as a product designer on vehicles, helmets and household appliances. Around 2008, in his own words, he "impulse-bought a small lathe" online. He set it up in his kitchen. A car was out of the question on a machine that size, but something that fitted in the palm of a hand was not, so he began to turn watch cases.
He had, he says, almost no knowledge of wristwatches at the time. He learned machining and movements from books, web searches and videos of watchmakers, imitating what he saw in photographs of movements taken apart. His first piece, No. 1, was only a case, machined in brass to his own design. "Although the finish was crude," he said, "the joy of having made it myself was immense." Early on he even cut his own glass and lenses from sheet and rod, with materials from model shops and stationers.
The name came from the neighbourhood and the method. Ōtsuka is the district in Toshima, close to Ikebukuro, where the workshop stands. Lōtec is "low-tech", which Katayama has called his favourite word: he likes old engineering and machines with levers and knobs, and his own machine tools, he said, are all decades old. There was a second motive. Asked why he chose the name, he laughed and said he had wanted something deliberately uncool.
After about five years of design and prototyping, sales began in 2012 with No. 5, the first model he offered. Production between 2012 and 2022 came to about 400 watches, sold directly to customers who ordered online, with 71 watches in 2022 alone.
The numbered watches
Every Ōtsuka Lōtec carries a number rather than a name, and the numbers follow the order of design. Katayama made Nos. 1 to 4 between 2008 and 2012, before any watch was offered for sale. Each production model pairs a Japanese automatic movement with a display module that Katayama designs and makes himself. The movements come from Miyota, the Citizen group's movement brand, named after the Nagano town where Citizen built a movement factory in 1959; the parent house is the subject of vintage Citizen watches. Ōtsuka Lōtec publishes each of these figures itself.
| Model | Display | Movement | Case |
|---|---|---|---|
| No. 5 Kai (2025), after No. 5 (2012) | Satellite hour, seconds disc | Miyota 90S5 with module, 28,800 vph, about 40 hours | 40.5 mm; 7.6 mm case under a 4.6 mm box sapphire |
| No. 6 (first shown 2015) | Coaxial retrograde hour and minute on a fan, seconds disc, date | Miyota 9015 with module, 26 jewels, 28,800 vph, about 40 hours | 42.6 mm by 11.8 mm |
| No. 7.5 | Jumping hour, minute and seconds in three turret windows | Miyota 82S5 with module, 24 jewels, 21,600 vph, about 40 hours | 40 mm by 11.2 mm |
| No. 9 (completed September 2025) | Jumping hour, rewinding minute, tourbillon, hour strike, power reserve | In-house Cal. SSGT, hand-wound, 278 parts, 18,000 vph, about 40 hours | 48 mm by 30 mm, square |
| No. 8 (completed March 2026) | Jumping hour channel, retrograde minute fader, seconds disc | Miyota 90S5 with a 62-part module, about 32 hours | 31 mm wide, 47.8 mm lug to lug |
No. 7.5 owes its half number to the watch before it: it is the improved No. 7. No. 5 Kai is a revision of the first No. 5, and kai means "revised".
How the displays work
The No. 7.5 began with an old cine camera. Katayama said that he liked the way the three or four lenses on a rotating turret switched in front of the film, and wondered how that would look as a watch. The hour sits in one window and jumps on the hour; minutes and seconds run on discs behind the other two. The module has about thirty parts, and he matches them one by one, because a slight difference in thickness between parts adds up to a large error once they are stacked. The tip of the hour disc's arbor has to be cut to within 5 microns.
The No. 6 is a gauge. Its hour and minute hands share one axis at six o'clock, sweep up across a fan and snap back to zero, while a seconds disc turns in the centre and the date sits to the right. The dial recalls the level dial of a vintage amplifier. The maker notes that the two hands may return to zero up to 60 seconds apart at midnight.
The No. 5 Kai borrows from the night clock. The satellite hour, in which numeral discs travel past a fixed minute scale, was first used to gather the time at the top of a night clock's face. Katayama moved it to the right-hand side of the dial so that a jacket cuff would not hide it. A double reduction gear takes out the backlash such displays usually show, and the hour disc strikes a ball-bearing roller at eight o'clock, so that it changes in an instant, twice an hour. The seconds disc turns on a 1.5 mm ball bearing by MinebeaMitsumi, introduced in 2009, which the maker describes as still the smallest in the world.
From one bench to a small team
For more than a decade Katayama did everything himself, from design to machining, assembly and sale. The change came through a customer. In one account, an employee of Precision Watch Tokyo, the company the independent watchmaker Hajime Asaoka founded in 2016, bought a No. 7.5. Katayama came to visit, and Asaoka asked him whether he would like to make Ōtsuka Lōtec there. That account dates the move to 2022; another dates the support to 2023.
The watches changed with it. For stability and durability, the maker re-engineered both the No. 7.5 and the No. 6: cases moved from SUS303 to 316L steel, mineral glass gave way to sapphire, the hour lens of the No. 7.5 became a custom sapphire, and a buckle engraved with the logo arrived. On the old No. 6, four of the eight bezel screws held the lugs; the new one fixes them from the back of the case. The maker's model page dates this specification to 2023, its own museum notice to 2024. By late 2023 three watchmakers were helping him make about fifteen watches a month.
The design desk did not move. "Even now, I handle the design, engineering, and prototyping in my home workshop," he said; the difference is the time he now has for it. He has also described the frustrations of a small maker: parts sold only in batches of a hundred or more, and some easier to order from America than to find among the parts dealers of Okachimachi.
Recognition in Tokyo and Geneva
Honours have arrived quickly. In October 2023 the National Museum of Nature and Science in Ueno, the museum that shows the Myriad Year Clock described in our page on wadokei, chose to preserve a No. 7.5 in its science and technology collection. "I would be happy if people in the future think, there was someone who made interesting watches," Katayama said.
In November 2024 came the Geneva prize and the craftsman award; the ministry's list for that year places him under watch assembly and adjustment. The No. 5 Kai was nominated for the Petite Aiguille prize, for watches up to 10,000 Swiss francs, in 2025. In April 2026 the maker announced that the current No. 6 and the No. 5 Kai had entered the permanent collection of the Musée International d'Horlogerie in La Chaux-de-Fonds. The No. 8 is a 2026 nominee in the same Petite Aiguille category, and the winners will be named in Geneva on 7 November 2026.
The No. 9 shows where the work is going. Its in-house Calibre SSGT is named after the sushi geta, the wooden board on which pieces are laid out, because its complications sit on the main plate in the same way. On the hour the hour disc jumps, the minute disc rewinds and a hammer strikes a gong shaped like a pipeline, which the maker calls an industrial chime.
What a collector should check
Most Ōtsuka Lōtec watches are recent, and the maker publishes full specifications, so a watch can be checked against its own page.
- Generation. On the No. 6 and No. 7.5, a sapphire crystal, a 316L case and the logo buckle mark the current specification. On the No. 6, the lug screws are the quickest sign: four bezel screws holding the lugs mean the earlier case.
- Setting. The maker asks owners of the No. 5 Kai, No. 6, No. 7.5 and No. 8 always to turn the crown forward when setting the time.
- Box, card and booklet. The maker gives a one-year warranty, and the date on the card records when the watch was first sold. Keep the box and booklet with it; our guide to what makes a full set explains why that matters.
- Condition. Read every grade against the Japanese grading scale. On a brushed steel case, the bezel screws and the edge of a box sapphire show handling first.
Today the house holds an unworn No. 6, an unworn No. 7.5 and an unworn No. 5 Kai, and a near-mint No. 5 Kai full set on the Ōtsuka Lōtec shelf. In Tokyo, the maker has kept a permanent display, with no watches for sale, on the fifth floor of the main building of Isetan Shinjuku since July 2026.
The case for caution
Not everyone is persuaded. Each production model rests on a Miyota base, so the movement beneath the module is an industrial one, and the maker names it on every model page. There were anecdotal accounts of early reliability and service problems, expected to fade as production settled; the re-engineering of 2023 and 2024 was aimed at exactly that. The watches are also sold almost only in Japan, mostly by lottery on the maker's own site, which keeps them scarce abroad. Katayama said that the team is still too small to meet demand and is taking overseas sales "one step at a time".
Those are fair points, and none of them touches what the watches are for. "Above all," the maker's own page says, "I design watches that I would like to wear and own."
Frequently asked questions
Who is Jiro Katayama?
He is the founder and designer of Ōtsuka Lōtec, a former car and product designer who taught himself watchmaking from around 2008 and has sold watches since 2012. In 2024 he was named a Contemporary Master Craftsman.
What movement is inside an Ōtsuka Lōtec?
The production models use Miyota automatic movements, the 90S5, 9015 or 82S5, under display modules Katayama designs and makes. The No. 9 uses his own hand-wound Calibre SSGT, with some parts, such as the barrel, from the 6498.
Why are the watches numbered?
The numbers record the order of design, from Nos. 1 to 4, made before any watch was sold, onwards. Half numbers and "Kai" mark revisions of an earlier watch.
Can the house find a particular model?
Yes. Tell us the number, the specification and the condition you want, and we will look in Japan and send photographs of the dial, case and papers before you decide.
Looking for a No. 6, a No. 7.5 or a No. 5 Kai? Tell us the model, the specification and the condition you have in mind.
References
- Ōtsuka Lōtec, official site, with the model pages for No. 5 Kai, No. 6, No. 7.5, No. 8 and No. 9
- Ōtsuka Lōtec, news: National Museum of Nature and Science (2 October 2023), Musée International d'Horlogerie (22 April 2026), permanent display (30 June 2026), GPHG nominations (1 September 2025 and 1 September 2026)
- Grand Prix d'Horlogerie de Genève, winners 2001 to 2024, and interview with Jiro Katayama
- Ministry of Health, Labour and Welfare, Outstanding Skilled Workers, fiscal 2024
- MONOCHROME, interview with Jiro Katayama, October 2026, and portrait, May 2024
- Hodinkee, Mark Kauzlarich, hands-on with Ōtsuka Lōtec, 26 November 2024
- Hodinkee Japan, interview with Jiro Katayama, 16 November 2024, and sponsored feature on Hajime Asaoka, 29 July 2024
- MIYOTA, brand history
- Fratello, Ōtsuka Lōtec, 12 October 2023
- Forbes, Jiro Katayama, 13 December 2023
- Hypebeast, interview with Jiro Katayama, December 2023
- WATCHNAVI, interview on the No. 7.5, 17 October 2023
- Gressive, Masaharu Nabata on Ōtsuka Lōtec, March 2025
- Watchonista, GPHG 2026 nominees, 1 September 2026
Further reading
- Japanese independent horology, for the wider map of makers working by hand in Japan today
- The rise of Japanese independent watchmakers, for Katayama's peers, from Asaoka to Kikuno
- Grand Seiko and Credor, for Seiko's two top lines, the other end of Japanese watchmaking
- Kept in the Box, for how Japanese owners store and service watches
- Kurono Tokyo, for the everyday watches Hajime Asaoka designs in Tokyo
- Nomos Glashütte, for the Tangente, the swing system and the house in Japan
- The Japanese horology shelf, for the Japanese makers in the house today