The Anagram on the Mountain: A Collector's Guide to Enicar, from Lengnau to Lhotse and Showa Station

Enicar belongs among the vanished Swiss houses in our Watch Almanac of houses, family trees and references: a true manufacture with its own calibres, an unusually inventive publicity department, and a name that now belongs to a Hong Kong company. For a collector in Japan it is above all two things. The first is the small gold or steel hand-wound dress watch marked Ultrasonic, the commonest Enicar in the country by far. The second is the Sherpa family of divers, chronographs and travel watches that the scientists, racing drivers and sailors of the 1950s and 1960s wore. Knowing which is which, and what the words on the dial actually mean, is most of what it takes to buy one well.

Enicar in brief

Enicar was a Swiss watch manufacture founded in La Chaux-de-Fonds in 1913 by Ariste Racine and his wife Emma Blatt, and run from Lengnau, in the canton of Bern, by the Racine family until the 1980s. It made its own movements, signed AR after the founder's initials, and in the 1950s and 1960s it was one of the most active sports-watch makers in Switzerland, with the Seapearl and Sherpa lines and the largest order book of any brand at the case maker EPSA. The company filed for liquidation in 1981, a rescue company ceased production in 1987, and the brand name passed to Wah Ming Hong of Hong Kong, which still sells watches under it, mainly in Asia.

Beginnings, telegrams and radium

The Racine family had been watchmakers in the Swiss Jura since the eighteenth century, in Lamboing in the canton of Bern and in Grenchen in Solothurn, and several Racines ran watch businesses of their own. That was the difficulty. When Ariste Racine and Emma Blatt opened their Manufacture d'Horlogerie Ariste Racine on 1 October 1913, the family name was already a registered trademark, held since 1870 by Jules Racine senior.

Emma's idea

The solution is credited to Emma. She suggested spelling the name backwards, and on 6 January 1914 Ariste registered both his manufacture and the brand Enicar. For years the word served mainly as the firm's telegram address, while its printed matter still read Horlogerie Ariste Racine. Only on 11 April 1932 did the company take the brand as its own name, becoming Enicar Société Anonyme with a nominal capital of 50,000 Swiss francs.

A sunroom and a radium room

The firm began very small. At first the couple could employ one workman, and the first war broke out within a year. The family worked out of a sunroom, then added a small radium laboratory for luminous dials, and the house later ran its own radium workshop for the Sherpa divers. Its first success was a teardrop-shaped pocket watch with a second aperture for a compass or a photograph, exported to Germany, Russia and China.

Soldiers and railwaymen

The present owner's timeline says the readable pocket watches of the First World War were favoured by European soldiers and railway crews. The firm also traded on both sides in the Second: surviving letters show contracts with British, American and German forces alongside ordinary civilian orders, including watches and alarm clocks for a Bucharest importer in 1942, when Switzerland's armed neutrality kept its factories open.

Lengnau and the AR calibres

A shortage of labour in La Chaux-de-Fonds pushed the Racines to Lengnau, a village near Grenchen where Ariste had already opened an assembly shop; the house histories place the move at his mother's house in Longeau, the French name for the village. Lengnau was turning from a farming village into a watch town: about a dozen watch and parts makers opened factories there between 1889 and 1927.

Oskar's blank workshop

Ariste's brother Oskar joined in 1918. He had run a shaft factory in Biel, which he closed in May 1930, and at Lengnau he helped set up a movement-blank workshop that fed the finishing floor quickly and in quantity. That workshop is what turned an assembler into a manufacture: from it came the AR family of calibres, named for Ariste Racine, though the firm went on buying movements from Adolph Schild and others for its simpler lines.

The second Ariste

Ariste Racine junior entered the company in 1934 and became general manager at the age of twenty-seven, on 30 October 1939 in one account and in 1940 in another. His parents left the business in 1943. Under him Enicar modernised after the war, and by the early 1950s it was producing more than 70,000 movements a year. By its fiftieth anniversary in 1963 it employed 600 people making 2,500 watches a day in two factories, Lengnau and Oensingen.

Certified movements

The calibres were accurate. On 16 July 1954 Enicar received its first certificate of accuracy from the Neuchâtel testing service, the forerunner of today's official chronometer control, for the hand-wound AR1010 with 17 jewels. In 1959 came the first in-house automatic, AR1125, followed by AR1126 and AR1127; with 33 jewels they were sold as Rubyrotor movements. Enicar called its own chronometer-grade watches Supertest rather than chronometer, which is why the word on a dial is not a model name either.

Bought-in chronographs

Not everything was made in Lengnau. Enicar's chronographs used Valjoux calibres 23, 72 and 92, earlier two-register chronographs used Venus or Lemania, and alarm watches came from Adolph Schild or Lemania. The first automatic chronometer of 1956 was built on a Felsa base. In the late 1970s and 1980s, to save cost, the company bought movements from FHF and ETA, numbering them from 2, as in 2161 or 2165.

What Ultrasonic means

Most Enicars in Japan say Ultrasonic under the logo, and many buyers take it for a model, like Sherpa or Seapearl. It is not. It names a process Enicar introduced in 1953, when it installed machines at its new Oensingen factory to clean unassembled movement parts with ultrasonic waves in a fluid.

Cleaning and epilame

The method was developed by the industrial research section of the Federal Institute of Physics in Zurich. Enicar added a chemical coating, an epilame applied as a gas, to every part so that oil stayed where the watchmaker put it instead of spreading across the metal. The coating was controlled to a hundred-thousandth of a millimetre, and the company claimed that a movement so treated needed no service for at least three years. It also claimed to be the only maker in its sector to use the technique.

From Ultrasonic to Star Jewels

The word appeared on dials and in advertisements until 1964 or 1965. With the Sherpa Star line came a new phrase, Star Jewels, which the company described as a system of oiling and chemically treating the essential parts of a movement: in effect a new name for the same process. A vintage watchmaker's comparison is fair, that Ultrasonic on a dial tells you about as much as Incabloc does. It dates the watch to roughly 1953 to 1965; it says nothing about the movement's grade.

Why it mattered

For the buyer the useful point is chronology. An Ultrasonic dial with the Saturn emblem places a watch in the brand's best years, when the movements were made in Lengnau and the cases were often by EPSA. A Star Jewels dial is usually from the mid-1960s onward, and a dial with neither word may be earlier or much later.

Seapearl and the compressor case

Enicar's other great asset was not its own. Ervin Piquerez SA, the case maker known as EPSA, designed a bayonet case whose back was turned rather than screwed, and later the patented compressor case that became more watertight the deeper it went, because water pressure pressed the back harder against its gasket.

Seapearl, 1955

Enicar registered the Seapearl name on 10 April 1953. The earliest known Enicar in an EPSA bayonet case is dated March 1955, under Swiss patent 98243, and the first watch marked Seapearl on the dial followed in May. In July 1955 came a reinforced version for the American diving brand Healthways, rated to 100 fathoms, and in January 1956 the first Seapearl 600 with the same reinforced case.

The Super Compressor

EPSA patented its bayonet Super Compressor case, Swiss patent 314962, on 31 August 1956. The first Seapearl in that case, with the diver's helmet mark inside the back, followed in October 1957. Over time Enicar became EPSA's largest customer among the many houses that used it, alongside divers such as those in our Zodiac Sea Wolf guide, and specialist writing on compressor watches calls it perhaps the most prolific and imaginative user of the case, in single-crown and two-crown divers, travel watches and chronographs. Two models, the Ultra Dive and the Sherpa OPS, had crown guards built into the case between the crowns.

Handle with care

The practical consequence is that a bayonet back does not unscrew in the usual way, and a watchmaker who treats it like a screw-back can damage it. It needs the right tool and a watchmaker who knows EPSA cases. Sixty-year-old gaskets also mean that no vintage Seapearl or Sherpa is waterproof until it has been resealed and tested, the same advice we give in our guide to vintage Seiko divers.

Everest, Lhotse and the Sherpa name

In the spring of 1956 a Swiss expedition led by Albert Eggler set out for the two highest unclimbed objectives in the Himalaya. On 18 May Fritz Luchsinger and Ernst Reiss made the first ascent of Lhotse, at 8,516 metres the fourth-highest mountain on earth. Within days two members of the same team, Jürg Marmet and a companion, made the second ascent of Everest, after the British climb of 1953.

The watches on the mountain

The team wore Enicars. Enicar's advertising called them Ultrasonic Sherpas, with a final s, and said they had kept time through temperatures from minus 49 to plus 113 degrees Fahrenheit. Collectors who have compared the advertised watch with surviving pieces describe a 34.5-millimetre EPSA case with 18-millimetre lugs, large radium markers and an AR1010 movement inside, essentially a Seapearl 600. The company published a colour booklet of the climb, praising the porters who carried thirty kilograms each to base camp.

Naming a family

Enicar registered the Sherpa name on 6 November 1956. Over the following decade it introduced more than a hundred different Sherpa designs, which made it the brand's best-known line. The name honoured the high-altitude porters and guides without whom the climb would not have happened, and the advertising of the time leaned on that comparison: faithful and relentless as a Sherpa, the 1956 advertisement said.

The sea, the Arctic and the race track

Enicar's publicity of the 1950s and 1960s was unusual for a Swiss house of its size. Rather than describe its products, it put them where people could watch them suffer.

Mayflower II, 1957

Mayflower II, a full-size reconstruction of the Pilgrims' ship built at Brixham in Devon and launched in September 1956, sailed from Plymouth for the New World in the spring of 1957. Enicar fixed an Ultrasonic Sherpas chronometer in an iron cage to the outside of the hull for a crossing of about fifty days. Her captain, the Australian sailor and author Alan Villiers, wrote that the watch took such a beating that the ship's sides were scarred where it struck them, that barnacles grew around it, and that it always went, correctly. Accounts differ on whether the cage hung from the keel or the rudder.

Spitsbergen, 1957

The same summer Enicar supplied Sherpas chronometers to the Swiss expedition of the International Geophysical Year in Spitsbergen, at about 80 degrees north. The director of the Swiss Meteorological Institute, Jean Lugeon, handed the watches to the team on 1 August 1957 and later reported an error of one second during his six weeks in the Arctic. One surviving piece of this type, reference 100/76, has an automatic AR1134 with a chronometer certificate, the serial engraved on the back.

Moss, Clark and Mitter

Enicar signed Stirling Moss in 1957 to wear an Ultrasonic Sherpa, and its publicity manager Gaston Sieber took what he admitted was a risk on a little-known Scottish driver, Jim Clark. Clark was an official Enicar ambassador from 1963 to 1966, wearing a Sherpa Graph chronograph on and off the track; he won the world championship in 1963 and 1965 and the Indianapolis 500 in 1965. The company's advertising also named the tennis player Ken Rosewall and the motorcycle champion Geoff Duke, and in 1969 it sponsored the German sports-car driver Gerhard Mitter.

The Sherpa Graph

The Sherpa Graph, introduced in 1960, used a Valjoux 72 that Enicar adjusted and engraved, in a 40-millimetre steel EPSA case with the helmet mark inside a bayonet back and a crosshatched crown. Collectors who have studied the Clark photographs identify his watch as a first-series grey-dial piece with serials in the 409 range, the only Sherpa Graph with a fair claim to his name; many sold as Jim Clark today are simply Sherpa Graphs.

Watches for air travellers

In 1958, the year direct jet routes opened between New York and London, more passengers crossed the Atlantic by air than by sea for the first time, and Enicar answered with travel watches. At the Basel fair of 1960 it showed the Sherpa Guide, the Steward and Stewardess for cabin crews, the Sherpa Graph and the Sherpa Dive.

Sherpa Guide

The Guide was the first Enicar with a true second-time-zone hand. Its 42-millimetre two-crown compressor case carried an external city ring, a red pointer ring, a GMT hand and an inner 24-hour bezel that turned through 360 degrees. The Steward and Stewardess had 24-hour or city bezels but no extra hand, and the slimmer single-crown Sherpa GMT followed with an arrow-shaped GMT hand.

Jet and Super-Jet

The Sherpa Jet, 36 millimetres, and the Super-Jet, 40 millimetres, were announced in early 1963. Both used an EPSA bayonet compressor case with an inner 24-hour bezel worked by the upper crown, and the first series ran on the automatic AR1126, an adaptation of AR1125. The second series, from about 1966 to 1969, mostly used AR1146 and brought the black-and-red chequered GMT hand that collectors prize. By 1964 Enicar had agreements with Swissair, Japan Airlines and the Scandinavian airline SAS.

The late divers

The last of the Super Dive line, the third series of the mid-1970s, was a large cushion-shaped diver on the automatic AR1167. It is the final expression of the compressor idea at Enicar and turns up far less often than the 1960s pieces.

Enicar and Japan

Enicar's Japanese thread is longer and better documented than most Swiss houses of its size. It runs from the first post-war imports to the Antarctic, through an airline, and on to the second-hand trade, where Enicar is one of the commonest Swiss names from the 1950s and 1960s.

The first imports

A Japanese collectors' history of the brand says Enicar was imported into Japan officially from 1951 and was popular at once. In 1957 its agent was a company named Nitto, and an Enicar advertisement of 25 April that year announced that Nitto had received the newest collection on the first intercontinental Swissair flight from Geneva to Tokyo, a Douglas DC-6B. Other Swiss names built their business on Japan in the same years, as our Technos guide shows. For a reader who knows how Ginza became Tokyo's street of watches, it is a period when an imported Swiss watch was still a serious purchase.

A warning from Lengnau

The success brought trouble. In 1959 Ariste Racine junior reported to his board on the changing Eastern market, with figures on Japanese imports and exports. Japan's own industry was growing fast and selling watches at about 60 per cent less than Swiss ones, and the Japanese market was also full of locally made watches carrying forged Swiss names. It is the same moment described in our history of the King Seiko and Grand Seiko rivalry, seen from the Swiss side.

Ten winters at Showa Station

The most remarkable Japanese chapter is Antarctic. Japan's Antarctic research expeditions began in 1957 as part of the International Geophysical Year and built Showa Station on East Ongul Island. Collectors' research holds that from 1958 to 1968 each team carried Enicar Sherpas, a newer model almost every year: the Sherpa Guide, Super-Jet, Super-Dive, Jet and Super-Divette among them. Film of the 1966 expedition shows them on members' wrists, and Hiroshi Kusunoki, leader of the tenth expedition, wrote in November 1968 that Antarctic observation needed the most precise time and that these dependable watches had made the data collection possible.

A gap in the record

The decade needs one qualification. The weather service's own history of Showa Station shows that the station was closed from 1962, when the icebreaker Soya was retired, until 1966, when the new icebreaker Fuji reopened it, and that no team wintered in 1958 either. On our reading the Enicar decade is a run of expeditions rather than ten unbroken winters, with watches on the ice around 1959 to 1961 and again from 1966.

Japan Airlines and the Jet

By 1964 Enicar's airline agreements included Japan Airlines, and collectors note that most first-series Sherpa Jets that come up for sale are found in Japan. One collectors' reference adds that marksmen at the Tokyo Olympic Games of 1964 wore Enicars; we have not seen a second record of it.

Catalogues of 1966

Japanese catalogues of 1966 survive. They are full of the new Sherpa Star models and of watches with fluted bezels not seen in French or Swedish brochures of the same year, together with square cases with heavy metal bumpers that look forward to the 1970s. A leaflet inside promised full service and repair and, unusually, insurance if the watch was stolen or destroyed by fire.

Dials made in Japan

Some Ultrasonic watches found in Japan have Kinoshita Made, Umeda Made or Kyoei Made, or nothing at all, where Swiss Made should be. A Japanese watchmaker who came across them guessed that dials were fitted locally in the 1950s by Japanese assembly firms; Swiss specialists have suggested some are simply poor redials. Nobody has settled it. Treat such a dial as a question to ask, not as proof either way.

China and the Hong Kong connection

Enicar's biggest market was never Japan. From the 1930s the brand had strong distribution across Asia and was especially well known in China. Its Shanghai agent in that decade, Lee Wai-lee, managed the brand across the region, and his family's Hong Kong firm later became the brand's owner.

A watch in a memorial hall

The present owner's timeline records that the memorial hall of Lei Feng, the soldier held up as a model citizen in the People's Republic, displays his Enicar watch among his everyday belongings. It is the kind of detail that explains why the name still carries weight on the mainland.

The trainee of 1958

The family ties are old. In September 1958 Enicar asked the Swiss authorities to let a young Hoff F. Lee, son of its main importer for Hong Kong, Bangkok and Singapore, train at Lengnau. The permit was still not approved in February 1960, and the papers stress that he would learn trading skills and how to tell low, medium and high quality watches apart, perhaps to calm fears of industrial espionage.

When China closed

A former employee remembered that the Chinese market became complicated in the mid-1970s, to the point of a complete stop on imports, and that this led to the dismissal of hundreds of workers. For a firm whose catalogue had been built partly on affordable watches for China, it was a blow on top of quartz, and it left Enicar as exposed as other independent houses such as the one in our Cyma and Tavannes guide.

Quartz and the long fall

Enicar did take part in electronic watchmaking. It introduced an electro-mechanical watch in 1961, and in 1970 it sold one of the first Swiss quartz watches, using the Beta 21 movement developed by the Centre Electronique Horloger in Neuchâtel. But it was not one of the companies gathered into the groups that later became the Swatch Group, the story told in our history of Swatch, and quartz from Japan, where the Seiko Astron of 1969 began the change, undercut it badly.

1977 to 1981

By 1977 revenue had fallen so far that the Racine shareholders received no dividend. Under Ariste junior's sons, Ariste R. and Jean-Pierre, the company cut 40 of its remaining 240 jobs in late 1977. By 1980 it could not pay its case and dial makers on time and paid some staff partly in watches. A deal with a Romanian firm for machinery and market knowledge in exchange for finance fell through, and on 26 March 1981 Enicar SA filed for liquidation with the authorities in Büren an der Aare.

The rescue company

A rescue company, W.M. Enicar SA, was set up in 1982 in the old Lengnau buildings, owned equally by the Racine family and by William L. Lee and Hoff F. Lee of Hong Kong, the trainee of 1958. It traded in components, machinery and trademark licences as well as watches. In November 1984 its last 200 production workers were laid off, the factory building was sold, and stocks of parts, including unassembled AR116x movements, were sold off at a discount.

Chronoswiss and the leftovers

Some of that stock went to Gerd-Rüdiger Lang, whose new firm Chronoswiss used Enicar movements and cases in its early watches. In 1985 Ariste O. Racine and Jean-Pierre Racine left the board. In April 1987 the rescue company could no longer pay its debts and went into liquidation, and by November 1987 the court receiver in Biel had been told that the remaining stock and the brand name had been sold to five creditors.

Enicar today

The brand name was bought by Wah Ming Hong Ltd of Hong Kong, a wholesale jewellery and watch firm founded in 1967 whose chief executive, Geoffrey Kao, is a grandson of Lee Wai-lee. The company sells under the name Enicar of Switzerland, gives an address in La Chaux-de-Fonds, and markets mainly in Asia; in 2011 it was said to be among the ten leading imported watch brands in mainland China.

What the modern watches are

Most modern Enicars use quartz movements, with a few mechanical models, most on Sellita calibres. The owner's website, which has a Japanese-language version, tells the brand's history from 1854, the date it gives for the Racine family's watchmaking in Grenchen, and it keeps the Sherpa name alive in its collections. None of this makes a modern Enicar a successor to a Lengnau watch in any mechanical sense.

The Sherpa revival

Separately, an engineer and long-time admirer of the brand, Martin Klocke, registered the Sherpa name and the EPSA diver's helmet mark in the European Union in 2019, and his company makes recreations of the Sherpa Ultradive and OPS in real compressor cases, on Sellita SW200-1 movements. It is a tribute brand with no legal connection to Enicar, and its watches should not be confused with originals.

Enicar timeline

What turns up in Japan

To see what a collector in Japan actually meets, we read every Enicar offered in the Japanese second-hand trade on 25 October 2026, 189 pieces in all, and sorted them by what their descriptions say. The picture is clear: this is a shelf of small hand-wound watches from the 1950s and 1960s, with the famous Sherpas a small minority.

Categories overlap, so the shares do not add up to 100. Three points stand out. First, the Ultrasonic dress watch outnumbers every Sherpa model together by more than five to one. Second, a quarter of everything is spare parts, a sign of how many Enicars Japanese watchmakers still keep running. Third, the original box is almost never present, which matters for value, as we explain in our guide to full sets, boxes and papers. The advertisements are worth a look in their own right: the Villiers and Mayflower II page and the tennis advertisements of the period appear regularly.

Reading an Enicar

Enicars carry more coded information than most vintage watches, on the dial, on the back and on the movement. Learning to read it is the best protection against a watch that is not what it claims to be.

Letters on the case back

Many Enicar backs are engraved with a reference and a string of letters. The collector community's list reads: A for automatic, a for all stainless steel, B for the Seapearl bayonet case, C for calendar, CH for chronograph, E for electro-mechanical, G for gold, M for gold-plated brass, N for the reinforced Sherpa case water-resistant to 20 atmospheres, P for plated, S for central seconds, T for a rotating timing bezel and X for a rotating bezel. A back marked Brevet with 314962 is an EPSA Super Compressor; 313813 is the plain Compressor.

Calibre numbers

In-house movements are signed AR. Enicar used four-digit numbers at first and later dropped the first digit on some calibres, so 1140 became 140 and 1160 became 160, with no change to the movement itself; the shorter number simply points to a later watch. A calibre beginning with 2, such as 2161 or 2165, is a bought-in FHF or ETA movement from the late 1970s or 1980s.

The emblem

The emblem dates a dial roughly. The early watches carry only the name. Saturn arrived in the 1950s and was drawn in several styles through the 1960s; in the last decade a golden sphere crossed by two thin lines replaced the drawn planet, and some brochures show it by 1972. A late-1960s back may also carry a small leaping shark, Enicar's mark for water resistance.

Dial words

Ultrasonic, Star Jewels and Supertest describe processes or grades, not models. Seapearl and Sherpa are lines. The model name, such as Graph, Guide, Jet or Dive, normally follows Sherpa on the dial, and the house sold its watches under other names too: it registered more than a hundred trademarks, among them Alprosa, Chromicar, Etsira, Savillon, Swisbaby and Teddy, and in Canada the jeweller Birks sold Enicars under its own name.

Where records disagree

Enicar's records were scattered when the company failed, and the accounts disagree in places. These are the points a careful buyer should know are open.

A sceptic's view

It is fair to ask whether Enicar's reputation is larger than its watches. The case for scepticism is this: the most famous technical features were not its own. The compressor cases were EPSA's and appear on dozens of brands, the chronograph movements were Valjoux's, and the Sherpa Graph shares its calibre with chronographs from Heuer, Breitling and others, the houses in our Heuer Carrera, Monaco and Autavia guide and our Breitling Navitimer guide. Ultrasonic was a cleaning method, and the claim of three years without service is a period advertising line. The marketing, in short, was better than the difference it described.

The answer

That is only half true. Enicar did make its own movements, by the tens of thousands, and its AR1010 earned an accuracy certificate in 1954. It used EPSA's case more widely and more inventively than anyone else. And the publicity was more than words: the watches went up Lhotse, across the Atlantic on the outside of a ship, to Spitsbergen and to Antarctica, where they were used, not just photographed. The honest summary is that Enicar was a very good mid-market manufacture with an exceptional eye for publicity, and that is what a buyer pays for.

Before you buy

Most of the checks are the same as for any vintage watch from Japan, with a few that are particular to Enicar.

Check the dial against the case

Redials are common, especially on Sherpa and Ultrasonic watches, and an original dial is worth much more than a fresh one. Look at the printing of Ultrasonic and the Saturn emblem under magnification: wavering letters, a misspelt word or a logo that is too heavy are warnings. Confirm that the case back's reference and letter code fit the dial, for instance that a watch with a Sherpa dial has the N code and an EPSA back.

Check the movement number

Ask for a photograph of the movement. An AR calibre that matches the period of the dial is reassuring. A Sherpa Graph should have a Valjoux 72; a first-series Jet, AR1126; a second-series Jet, usually AR1146.

Check the condition grade

Japanese descriptions use letter grades and stated faults precisely; our guide to Japanese condition ranks explains what they mean. A watch stated as not working is often exactly that, and a parts movement may still be the best way to keep a good dial running.

Plan the service

Budget for a full service and new gaskets on any diver, and do not swim with a vintage Enicar however good it looks. Watches kept carefully in Japan, as described in our note on how Japan keeps jewellery and watches, are often in better order than their age suggests.

Beware the famous names

Jim Clark, Lhotse and Mayflower II attach to many watches with no real link to them. A Sherpa Graph is a fine chronograph in its own right; only the early grey-dial pieces have a case for the Clark connection, and a watch is not an expedition piece unless it can be traced to one.

Enicar FAQ

Is Ultrasonic an Enicar model?

No. It is the name of the ultrasonic cleaning and oil-treatment process Enicar used from 1953, printed on dials until about 1965. It dates a watch but does not identify a model or a movement grade.

Did Enicar make its own movements?

Yes. Its AR calibres, such as the hand-wound AR1010 and the automatic AR1125 family, were made in Lengnau. Chronographs used Valjoux movements, and some late watches used FHF or ETA calibres.

What is a Sherpa?

A family of more than a hundred Enicar designs from 1956 into the 1970s, named after the 1956 Everest and Lhotse expedition: divers, chronographs, travel watches and dress pieces, most in EPSA compressor cases.

Which Sherpa did Jim Clark wear?

A Sherpa Graph chronograph with a Valjoux 72, and on the best evidence a first-series grey-dial piece. Not every Sherpa Graph is a Clark watch.

Why are there so many Enicars in Japan?

Official imports began in the early 1950s, the brand worked with Japan Airlines and the Antarctic teams, and Japanese watchmakers kept them running. Small hand-wound Ultrasonic watches are the commonest kind today.

Finding an Enicar

An Enicar is one of the most rewarding ways into Swiss watches from Japan: a real manufacture's movement, a story that runs from Lhotse to Showa Station, and a wide choice of cases. Start with a good Ultrasonic dress watch, learn the codes on its back, and move to the Sherpas once you can tell an EPSA case and an original dial at a glance. Our wider guide to collectible watches, vintage and modern sets Enicar among its peers, our atlas of Tokyo boutiques covers where to look in person, and our guide to bringing a piece home from Japan explains the practical side. When we have a vintage Enicar, it will be on our collectible watches shelf.

Further reading

References

Volver al blog

Deja un comentario

Ten en cuenta que los comentarios deben aprobarse antes de publicarse.