Buying and Testing a Film Camera: A Bench Guide | Japonista
Almanac · The Workbench
Buying and Testing a Film Camera: A Bench Guide
フィルムカメラの選び方
A camera forty or fifty years old is a machine with perished foam, dried grease and a meter that may or may not agree with the sun. It can still be a joy. This guide gives a routine you can follow with a torch, a stopwatch and a roll of film, and it sorts the faults into those that cost little and those that end the conversation.
Fact sheet
At a glance
- Look first. Dents may mean a drop; small scratches usually do not matter.
- Hear the shutter. Fire it at every speed; slow speeds fail first.
- Seals are cheap. Replacing foam seals is inexpensive; light leaks are not a reason to refuse a camera.
- Lens in torchlight. Haze and etching are serious; light dust is not.
Why Inspection Is a Form of Imagination
To inspect a used camera is to read a life. The dent on the prism tells of a pavement; the clean battery chamber tells of a careful owner, or of one who never used the meter; the smell of the case tells of a loft, a cellar, or a smoker’s shelf. A camera of fifty years has had several lives, and the person who buys it inherits whichever one the last owner left. The bench routine in this guide is a way of reading that inheritance quickly, with a torch, a watch and an afternoon’s patience.
The thesis is that the routine is not a ritual of suspicion but a method of fairness. It lets a buyer pay for what a camera is and not for what its description hopes. It lets a dealer say honestly that a slow speed lags and be believed when he says the rest is sound. And it lets a camera that has a fault be bought, knowingly, by a person who wants it for the lens, or the shape, or the memory, and is willing to mend it. Jim Grey, whose guide is the backbone of this chapter, says in effect that he accepts risks when the price is low enough; the method exists to make the risk visible.
Everything in this chapter is drawn from published guides that we name, and the places where they disagree or fall silent we mark. We give no cost that is not in a source, and we date those that are. Prices of repair and of film change, and the figures from 2014 or 2017 are history before they are advice.
Seven Steps in a Sensible Order
The reference guides we have read agree on the outline. Jim Grey, writing for collectors, begins with the body and the controls, then the interior and the light seals, then the shutter, the lens and the winding mechanism. Popular Photography sets a stricter standard for collectors than for users, and Lomography’s school and the Japan Camera Hunter guide follow the same order. The routine below is ours, built from theirs, and each step cites the guide behind it.
A routine for any used film camera, in the order that costs least time to fail fast. Diagram by Japonista.
Look closer: The order matters: the first three steps need nothing but your hands and your ears, and they eliminate most cameras before you spend any money.
Diagram by Japonista. Original drawing, no source image.

Different types of 35-mm film cartridges. 1 -- Nikon SP, Nikon F (Contax-type) labirintine cassette inside sleeve; 2 -- Nikon cassette body; 3 -- labirintine ca
Runner1616, CC BY-SA 3.0, via Wikimedia Commons.
One point recurs: a camera that passes every check can still disappoint, because some faults appear only in use. The sensible answer, in Jim Grey’s words, paraphrased, is to move on when a camera fails the basic checks unless it is cheap enough to repair yourself; common cameras are plentiful, and waiting for a better example is often the right choice.
A Pentax K1000 SE with a 50mm f/2 lens
Bubba73 (Jud McCranie), CC BY-SA 4.0, via Wikimedia Commons.
Look, Wind and Listen
Look. Large dents suggest a drop and perhaps damage within; small dings and scratches do not matter much. Peeling leatherette can be replaced with a kit and should not be re-glued. Look for rust or marks inside the camera, which point to damp storage. Smell it: smoke and mould are warnings. Turn every ring: they should move freely without feeling loose.
Wind and fire. The winding lever should work smoothly and the shutter should fire cleanly. If the shutter will not fire, check whether a pin or a cocking lever must be set by hand with the back open. On motorised cameras, listen: any squeaking from the motor is a reason to walk away, according to Popular Photography.
Every speed. Fire the shutter at every speed, including B. Slow speeds fail first, and on an older focal-plane camera they may lag; compare them against a stopwatch or a known-accurate camera. Jim Grey cautions that the sound does not prove accuracy, since a shutter can sound right and be badly off, and Japan Camera Hunter notes that a lagging slow speed is often cleanable and can be used in the price discussion. Popular Photography’s statement that if one speed is off they all are is, we think, too sweeping, and we do not repeat it.
Open the Back, Hold the Lens to Light, Read the Meter
Open the back. Check for cleanliness and for fungus or mould. Foam light seals around the back perish with age and cause leaks; they are cheap and easy to replace with a kit, and a camera with worn seals is not a bad camera. Look for battery acid in the compartment, particularly if batteries were left inside for years. On a focal-plane shutter, look for gaps, wrinkles, debris and pinholes, which show against a light with the shutter held open on B; on a leaf shutter, the blades should lie evenly, with a little oil acceptable and a lot not.

Mycelia (“lens fungus”) on the surface of a lens element. The element is ca. 1 cm in diameter and was taken from a broken Revuenon 1:3,5 f=28mm lens.
El Grafo, CC BY-SA 4.0, via Wikimedia Commons.
Lens to light. Inspect both ends in good light and then hold the lens up and look through it with a torch. Haze, a frosted look inside the glass, is usually a reason to walk away. Fungus, web-like marks, can be cleaned, but any etching is permanent. Light dust and light scratches do not usually affect performance; deep scratches often do. For a built-in lens, open the back, set the shutter to B and look through. Check that the aperture ring is firm, that the focus turns smoothly without dry spots, and that oil has not crept on to the aperture blades. Stiff focus on an old lens is usually a matter of lubrication, though one that is very hard to turn can be a deal-breaker for a buyer who does not want a service.

Kleinbildkamera-Objektiv mit Fungus (Glaspilz) an der Rücklinse
Jakob Ott, CC BY-SA 3.0 de, via Wikimedia Commons.
Meter and finder. Point the meter at different parts of a scene and check that the reading changes; compare it against a working camera or a meter app. Meter repairs can be expensive. Check the battery type: if the camera was designed for a mercury cell, confirm that an adapter or modern equivalent exists. On a rangefinder, align the patch at infinity and at close range; a vertical misalignment of the patch is common. On an SLR, check that the aperture closes down when the shutter fires and that the prism and screen are not hazy.

Fungus on an SMC Pentax-D FA 100mm f/2.8 Macro WR photographic lens
Javier Perez Montes, CC BY-SA 4.0, via Wikimedia Commons.
A Test Roll
If you can, run a cheap roll of film through the camera. Japan Camera Hunter recommends it because it tests rewind and electronic features that work only with film loaded. Develop and read the negatives for light leaks at the frame edges, uneven exposure across the frame (a shutter fault), and focus that falls consistently in front of or behind the subject (a rangefinder or screen fault). A single roll will tell you more than an afternoon of handling.
After a camera is shipped, even one in perfect condition may need cleaning or recalibration, and Japan Camera Hunter advises buying from a dealer who accepts returns. A description should say what has been tested and what has not. If you are told only that a camera is in excellent condition, ask what that means.
| Fault | What you see | Cost | Verdict |
|---|---|---|---|
| Perished foam seals | Crumbling foam, light leaks | Low | Mend; use as a price lever |
| Peeling leatherette | Lifting covering | Low | Replace with a kit |
| Slow shutter speeds | Lag against a stopwatch | Moderate; often cleanable | Negotiate |
| Dead meter | No reaction to light | High | Weigh carefully |
| Lens haze | Frosted look inside | High | Usually walk away |
| Lens fungus | Web-like marks | Moderate if no etching | Clean if the glass is not etched |
| Etched glass | Permanent marks | High | Walk away |
| Oil on aperture blades | Sticky or slow diaphragm | Moderate | Service needed |
| Battery corrosion | White or green deposit | Moderate to high | Inspect contacts |
| Misaligned rangefinder patch | Doubled image at infinity | Moderate | Recalibration |
What Is Normal and What Is Not
Cosmetic wear is normal in a fifty-year-old camera, and so are slight dust inside lenses and, in an unused camera, stiff controls. What is not normal is a hazy lens, a fungus-etched element, a shutter that sticks at several speeds, or a body that smells of smoke. A collector should be stricter than a user, as Popular Photography says, and should research repair costs and factor them into the price.
A trustworthy description lists what has been tested, says what has not, and shows the camera from several sides. The house’s own shelf follows that practice, as the shelf at the foot of this page shows. Condition words differ between dealers, and Japan Camera Hunter observes that even a well-regarded Japanese dealer’s grading can sometimes be off, so check anything you can.
Six Tales from the Workbench
The Silette that did nothing. Jim Grey says he has been burned before, most memorably by an Agfa Super Silette on which nothing worked: not the rangefinder, not the focusing ring, not the shutter. He presents the lessons of his guide as learned the hard way, and the Silette is the reason he insists on the basic checks before the pleasure of owning begins.

Yashica Electro 35 GTN
Jahanzeb Ahsan, CC BY-SA 3.0, via Wikimedia Commons.
Six Nikons for five dollars each. A reader, Mark, tells in the comments of Grey’s first guide that he bought a box of six Nikon SLRs for about five dollars apiece and that they needed only batteries. The same reader owns a Wardflex twin-lens reflex that looked excellent in an online sale and became a shelf piece. The two stories sit side by side and are the whole philosophy of buying used: some boxes are windfalls, some beauties are ornaments, and the difference is found by testing.
The Nikon F2 and its copper. A commenter on Grey’s second guide describes a Nikon F2 with only a trace of corrosion in the battery chamber that turned out to have corrosion along its copper wiring, reaching deep into the body. The advice offered is to avoid any camera with signs of battery leakage. Grey replies that he accepts the risk when the price is low enough, and the exchange is a fair summary of the two schools of buyer.
The pinhole and the dead meter. Grey describes a Minolta SR-T 202 with a dead meter and a pinhole in the shutter curtain that left bright spots on many photographs. He metered with a telephone and was content; the pinhole bothered him more. The story teaches an order of seriousness: a dead meter can be worked around, and a shutter that scatters light cannot.
The five-dollar Prego. Another reader tells of a Rollei Prego bought for five dollars whose film advance had no torque once film was loaded. Grey draws the lesson that mostly electronic cameras can fail in ways that no field inspection reveals until a roll has been run through them, and the advice that follows is to make the basic checks first and to celebrate only afterwards.
The always-on meter. Grey notes that some powered meters must be switched on to be tested, and that some cameras, such as the Pentax K1000, are always on. Others need a switch, a partial pull of the winding lever, or a half-press of the shutter button. A buyer who does not know which kind he holds may conclude that a sound meter is dead, and the story is a small warning against the hurried verdict.
Batteries, Covers and Corrosion
Grey begins the advanced part of his guide with the battery compartment, and so should a buyer. A camera with no battery cover is fully mechanical. A camera that takes a battery has some electronics, if only an onboard meter, and none of those functions can be tested without the correct cell. Grey adds a practical point, that a high-street chemist stocks a surprisingly wide range of batteries, so a camera he wants badly can be tested on the spot.

Détail intérieur d'un Olympus OM-1 montrant le rideau de l'obturateur au centre, l'emplacement de la pellicule à gauche et la bobine d'entraînement de la pellic
JBouchez, CC BY-SA 4.0, via Wikimedia Commons.
The cover should come off easily, by a coin slot, a knurled edge or a tab, and the chamber behind it should be clean. A jammed cover usually means corrosion. Grey has cleaned light corrosion with a dab of vinegar and fine steel wool, and in his experience heavy corrosion usually means the electronics will not work. The Nikon F2 anecdote above is the counterweight: corrosion may run further than it looks.

Black Canon AE-1 (1976) SLR camera from the back with the film cover open
en:User:Cburnett, CC BY-SA 3.0, via Wikimedia Commons.
Old designs add a second problem. The Yashica Electro 35 was built for a 5.6-volt mercury cell, now banned, and the usual remedy is a 6-volt alkaline with an adaptor; the Pentax Forums guide lists adaptors from PX625 cells to A76 batteries and notes that A76 or LR44 cells can power Nikkormats, the meter prism of the Nikon F and the Canon F-1. It adds that most Pentax Spotmatics use a PX-400 replacement cell with a built-in voltage adaptor, and that Pentax built voltage regulators into its meters; on other bodies, it says, mercury-cell batteries reportedly last about half as long, and the meter becomes unreliable past the halfway point of the cell’s life.
Popular Photography gives the shortest rule: look up the battery type and check that it is still made, and if it is not, make sure an adaptor exists that lets modern batteries be used.
Checking Focus Away from the Bench
Manual-focus cameras with a viewfinder offer no easy way to check accuracy in the field, Grey says, and he recommends using the rangefinder that the camera carries, whether inside the viewfinder or in a separate window. Look for the bright central patch and check that it is clear enough to show the image in it. Aim at something at a known distance, turn the focusing ring until the image in the patch lines up with the viewfinder image, and compare the distance on the ring with the real one.

Sur un Olympus OM-1, la sélection de la vitesse d'obturation s'effectue en tournant une bague autour de la monture du boitier.
JBouchez, CC BY-SA 4.0, via Wikimedia Commons.
On a manual-focus 35 mm reflex the same job is done with the split-image circle or the microprism ring: focus is correct when the split image lines up or the microprism stops shimmering. For an autofocus camera, Grey suggests looking for a manual mode and using the same methods; with no manual mode, he says, one must trust the camera. Across dozens of cameras over forty years he found only one or two significantly off.

User Smial on de.wikipedia, CC BY-SA 2.0, via Wikimedia Commons.
Popular Photography adds checks for the lens itself: feel for dull spots, where the focusing ring catches slightly, which may be degraded grease, and check that focus does not stick at either end of its travel. For a twin-lens reflex, the Pentax Forums guide offers a clever test: stretch cellophane across the film rollers to make an improvised screen, focus on a point with the viewing lens, and check that the same object is sharp on the screen. It is the surest way to see whether the two lenses agree.

User Smial on de.wikipedia, CC BY-SA 2.0, via Wikimedia Commons.
Three Kinds of Light Meter
Grey explains how to find a meter: look through the finder for a needle or a panel of lights or figures, though some cameras put the needle on the body. Then he sorts meters into kinds. Selenium meters need no battery; look for a bubbled plastic patch on the front or around the lens. A reader remarks that working, accurate selenium meters are rare, and Grey notes that one kept covered when not in use is far more likely to survive. CdS and silicon meters need a battery; some CdS cells sit on the body and many are hidden inside it.

Michael Holley Swtpc6800, Public domain, via Wikimedia Commons.
To test, Grey recommends a telephone light-meter application. Read the same light with the application and the camera, match the speed or the aperture on each, and repeat across several settings. A meter that is consistently wrong is still usable: his Yashica Lynx 14e reads a full stop off, and he compensates. The Pentax Forums guide gives the same advice in another form, that a meter which underexposes by a stop can be corrected by setting the film-speed dial accordingly, and it warns that if a meter is off there may be no remedy but to buy a camera with a good one.

Dessous d'un Olympus OM-1 montrant le bouchon de fermeture du logement de la batterie à à gauche et le filetage pour fixer un trépied au centre.
JBouchez, CC BY-SA 4.0, via Wikimedia Commons.
Meter repair, Popular Photography warns, can be very expensive. The Pentax Forums guide singles out the metering prism of the Pentax 6x7 as the part most likely to lose sensitivity over time, while saying that meter failure in other 35 mm Pentax bodies is not universal. Grey adds a caution for the electronic age: cameras with more electronics often bury manual exposure in confusing menus, and some have no manual exposure at all, so a dead meter makes them useless.
What Our Own Chapters Warn Of
The maker chapters of this almanac record several faults and cautions that belong on a Japanese buyer’s list. They are repeated here, with their sources, so that the bench guide and the histories speak to one another.

Nikon F Cameras in both common colours. Both are equipped with Photomic FTN finders. the black Camera sports the name "Nikkor" instead of "Nikon". This is an ea
Minya S, CC BY-SA 4.0, via Wikimedia Commons.
The Canon AE-1, as the Canon chapter explains, has a battery compartment cover that the article we consulted names as the part that breaks most often. The Yashica Electro 35 has the mercury-battery problem above, and the rubber pad under its spring-loaded slider can degrade and affect metering, requiring disassembly, while its foam light seals can fail though they are fairly easy to replace. The Pentax 6x7, according to the Pentax Forums guide, is the body whose metering prism is most likely to lose sensitivity. And the Contax T2, as our Yashica and Contax chapter reports, is priced by fashion more than by condition, so every item on the checklist should be asked about: the lens cover, the autofocus, the flash, the battery contacts and the finder.

Michael Gatchell, CC BY 2.0, via Wikimedia Commons.
None of this is a verdict on any model. It is a set of places to look first, and the habit is general: read what is known about the particular camera, then test the things it is known to do badly.
Reading a Price and a Description
A price is a claim about condition. Popular Photography says collectors should apply stricter standards than photographers who only want a working camera, and that if the camera is not fully functional the buyer should research the repair cost and subtract it. Some equipment, such as a Leica lens, sells at high secondary-market prices, so a buyer should confirm it works first. Grey, on online sales described as untested, says he can often judge them from the photographs and some research, and buys only when a broken camera would not hurt too much financially.

Canon F1n 35mm film single lens reflex camera. This camera is a tank! I have also used and abused this camera over the years and it still WORKS!Introduced in
pointnshoot, CC BY 2.0, via Wikimedia Commons.
The market itself has changed. A Digital Camera World writer reports that the Contax T2 rose from a couple of hundred dollars to nearly $2,500 after a celebrity began using it, and that Leica film-camera sales rose, in an unsubstantiated figure, by 900 per cent over eight years. The same writer reports that a five-pack of Portra 400 that cost about $54 in 2018 costs about $109 when in stock, and that Fujifilm warned of price rises of up to 60 per cent in April 2022. A camera that is bought for more than it is worth is bought twice, once for the body and once for the fashion, and film is an unavoidable running cost on top.
A description should say what was tested, what was not, and what is known about the camera’s history. The house’s own shelf follows that practice, and if a description says only that a camera is in excellent condition, the right reply is to ask what that means.
Cleaning, Service and Repair
Cameras, the Lomography guide says, should be cleaned regularly, whether or not they are often used, and because many are decades old it recommends service about every two years. We cannot vouch for that interval, which is the guide’s, but it reflects a truth: grease dries, foam perishes and a camera that sits will need attention.

George Rex from London, England, CC BY-SA 2.0, via Wikimedia Commons.
The cost figures in the guides are dated. The Pentax Forums guide priced a shutter overhaul for a twin-lens reflex at $150 to $300 in 2014; a reader of Grey’s first guide put professional lens-haze cleaning at about $50 to $100 and named several technicians in the United States. Treat these as the order of magnitude, not a quotation, and ask a technician before buying a camera that needs one. Grey, for his part, tapes the gaps in a perished back with electrical tape rather than replacing the foam, which is tedious; a kit is the neat way, as Popular Photography says.
For the faults that the guides do not cover, among them rangefinder alignment, mirror condition and the use of applications or film to measure shutter speed, the right answer is a qualified technician, not a forum.
Curiosities of the Workbench
Each of these is drawn from the guides named in this chapter.
- A smartphone torch is enough to examine a lens, according to Grey, and a penlight is what Popular Photography recommends.
- Grey says shutters often stick open at the slowest speeds, and that this is not always a deal-breaker because he rarely shoots that slowly.
- On a leaf shutter, Grey says to check that the small spring that drives it is present; he has seen springs go missing.
- Popular Photography says that if one shutter speed is off, the others generally are too.
- The Lomography guide says to cycle the shutter in bulb mode and check that it stays open for as long as you hold it.
- Grey cleaned a very dirty Ansco lens with a swab and rubbing alcohol.
- A reader of Grey’s guide says haze is usually caused by evaporated lubricants and is the most damaging to sharpness and contrast.
- The Pentax Forums guide says some folding-camera lenses, such as those of the Kodak Retina II and Voigtländer Perkeo, rival modern lenses in quality.
A Small Workbench Glossary
Bulb (B). A setting that holds the shutter open for as long as the release is pressed.
Haze. A frosted look inside a lens, caused by evaporated lubricants, according to a reader of Grey’s guide.
Fungus. Web-like or snowflake marks that start at the edges of an element; etching it leaves is permanent.
Etching. Permanent damage to the glass surface.
Schmutz. Dirt on a lens that can be wiped off gently, as distinct from haze.
Leaf shutter. A shutter of blades in the lens, found on twin-lens reflexes and many compacts.
Focal-plane shutter. A shutter of curtains just in front of the film; check for gaps, wrinkles and pinholes.
Selenium meter. A meter that needs no battery and uses a bubbled plastic cell.
CdS meter. A meter using a cadmium-sulphide cell and a battery.
Light seals. Foam strips around the back that perish into a sticky residue.
Mercury cell. A battery type now banned; adaptors substitute modern cells.
Test roll. A cheap roll of film run through a camera to expose faults the hand cannot find.
The Camera Shelf
The house keeps a small shelf of Japanese cameras, and keeps it honest: at the time of writing it holds Contax T2 compacts with Carl Zeiss lenses, each photographed and described with its condition set out. If a body or lens you want is not there, the concierge desk can look for it in Japan.
Answered plainly
How do I test a shutter without equipment?
Fire it at every speed, listen, and compare slow speeds against a stopwatch. Jim Grey cautions that the sound does not prove accuracy, so a test roll is better still.
Are perished light seals a reason not to buy?
No. They are cheap and easy to replace with a kit, and worn seals are a fair point in a price discussion.
Can lens fungus be cleaned?
Sometimes, but any etching of the glass is permanent, according to Jim Grey’s guide. Haze is usually a reason to walk away.
What should I do about a mercury battery camera?
Confirm that an adapter or a modern equivalent exists before you buy; Popular Photography advises checking the battery type for this reason.
Should I run a test roll?
Yes if you can. Japan Camera Hunter recommends it because it exercises rewind and the electronics.
Why do some rangefinder patches look misaligned?
A vertical misalignment is common in older cameras, according to a comment reported by Japan Camera Hunter; it can often be corrected by a technician.
How much should I pay for a camera that needs a service?
Popular Photography advises researching the repair cost and subtracting it from the price. A technician can quote the work before you buy.
Is battery corrosion always a deal-breaker?
Not always: Jim Grey cleans light corrosion with vinegar and fine steel wool, but a commenter warns that corrosion can run deep along the wiring, so heavy corrosion is a reason to be careful.
What battery does a Yashica Electro 35 need?
It was designed for a 5.6-volt mercury cell, now banned; a 6-volt alkaline with an adaptor is the usual replacement.
Can I check focus accuracy in a shop?
On a rangefinder, aim at an object at a known distance and compare the focusing ring with the real distance; on a reflex, use the split-image circle or microprism ring.
Does a dead light meter mean a dead camera?
No. A mechanical camera can be used with a telephone meter, as Grey did with an SR-T 202; a camera that has no manual exposure cannot.
How often should a film camera be serviced?
A Lomography guide recommends about every two years; that figure is the guide’s own and not a standard.
Where next
Sources and image credits
- Inspecting vintage film cameras before you buy, part 1 (Jim Grey)
- How to inspect vintage cameras and lenses before buying (Popular Photography)
- How to tell if a film camera works (Lomography)
- Buying a film camera: a how-to guide (Japan Camera Hunter)
- Inspecting vintage film cameras before you buy, part 2: Advanced features (Jim Grey)
- How to evaluate and test a legacy camera (Pentax Forums)
- Is the price of 35mm film killing the film photography revival? (Digital Camera World)
- Yashica Electro 35, Wikipedia
- Image: 135 cassettes 2, Runner1616 (CC BY-SA 3.0)
- Image: Pentax K1000 SE, Bubba73 (Jud McCranie) (CC BY-SA 4.0)
- Image: Lens fungus, El Grafo (CC BY-SA 4.0)
- Image: Objektiv fungus, Jakob Ott (CC BY-SA 3.0 de)
- Image: Fungus on SMC Pentax-D FA 100mm F2.8 Macro WR lens 1, Javier Perez Montes (CC BY-SA 4.0)
- Image: Yashica Electro 35 GTN, Jahanzeb Ahsan (CC BY-SA 3.0)
- Image: Olympus OM-1 chambre de la pellicule, JBouchez (CC BY-SA 4.0)
- Image: Canon AE-1 back open, en:User:Cburnett (CC BY-SA 3.0)
- Image: Olympus OM-1 sélecteur de vitesses d'obturation, JBouchez (CC BY-SA 4.0)
- Image: Schlitzverschluss 1 1000s, User Smial on de.wikipedia (CC BY-SA 2.0)
- Image: Tuchschlitzverschluss, User Smial on de.wikipedia (CC BY-SA 2.0)
- Image: Minolta Maxxum 7000 35mm SLR back open, Michael Holley Swtpc6800 (Public domain)
- Image: Olympus OM-1 vu du dessous, JBouchez (CC BY-SA 4.0)
- Image: Nikon F Cameras, Minya S (CC BY-SA 4.0)
- Image: Pentax ME Super body, Michael Gatchell (CC BY 2.0)
- Image: Canon F1n, pointnshoot (CC BY 2.0)
- Image: Olympus Trip focusing, George Rex from London, England (CC BY-SA 2.0)
Last reviewed 28 October 2026. Pictures are public-domain or openly licensed and credited beneath each one; diagrams are drawn by Japonista.
Want a second pair of eyes on a camera you are considering? The concierge desk replies within one to three business days.
Return to the Japanese Camera Almanac · Make a private request
Private concierge
Looking for something in particular?
Describe the piece or the project you have in mind. A senior advisor in Tokyo reads every case file personally and replies within two business days, with fees set out in writing before any work begins.